2BEX4-38AGElectric Treadmil

WALKING PAD USER MANUAL CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. TABLE OF CONTENTS Warranty Information & After-Sales Service .......................... 1 Important Precautions ........................................................... 2 Product Specifications ............................................................ 3 Packing List ............................................................................ 5 How to Use the Walking Pad .................................................. 6 LED Monitor Instruction .......................................................... 7 Description of Remote Control Buttons ................................. 8 Troubleshooting and Maintenance ...................................... 10 Maintenance Instructions ..................................................... 12 Exercise Guidelines ............................................................. 15 Suggested Stretches ............................................................ 16 1 Warranty Information & After-Sales Service Welcome to using Lichico series products. This product comes with a 2-YEAR FREE WARRANTY for normal use, provided that it is not damaged by human intervention. Please note that our company is not responsible for any failures caused by incorrect installation, incorrect use, or replacement of parts, and the warranty does not apply to unauthorized repairs, including resulting repair costs which are the responsibility of the customer. Please note that this product is intended for home use only, and our company is not responsible for any problems caused by commercial use. After-sales Service If you encounter any product problems or have lost the remote control, please contact us through the following methods. We provide 24/7 customer service and support. Service Team contact information 2 Important Precautions 1. Carefully read the user manual before using the product. 2. The product must be grounded properly when connected to the power supply. Failure to do so may result in electric shock. 3. Do not replace or modify any parts of the treadmill to ensure safety. 4. Use the treadmill normally according to the user manual and do not remove any parts to avoid injury, such as the motor cover or the rear roller cover. 5. Do not touch the moving parts while the treadmill is in operation and keep children away from it. 6. Exercise moderately to avoid health damage. Stop exercising immediately if you feel dizzy. 7. Wait for the running belt to stop before folding it. 8. If the power cord is damaged, replace it with the help of the manufacturer, its service department, or a professional worker to avoid danger. 9.This product is only suitable for adults in good physical and mental condition. Please do not let children use it. 3 Product Specifications 4 Product name: Walking Pad Treadmill Product model: 38AG Product dimensions: 108cm (L), 52.5 (W), 8.5cm (H) Running area: 1000*380MM Speed range: 0.8-6 KM/H Weight capacity: 100KG Motor horsepower: 1.5 HP Net weight: 11KG Gross weight: 14KG Rated voltage: 220V Class: HC ①Reminder: The product size, net weight, and gross weight provided are approximate values. For specific size and weight information, please refer to the actual product. Bluetooth APP： Besyfit. JOIN THE APP Besyfit Scan the QR code to download 5 Packing List 1. Walking Pad Treadmill 2. Accessory kits： 1) Remote controller x 1 2) Silicone oil x 1 3) L spanner x 1 4) User manual x 1 6 How to Use the Walking Pad To quickly use the walking pad, please follow these steps: 1. Connect the power to the walking pad. 2. Turn on the power switch located on the front of the deck. 3. Press the "Start/Stop" button on the remote controller to start the walking pad, and the LED monitor will display "3-2-1", with the buzzer sounding once for every count down. After this, the motor will start running. 4. Once the walking pad is running, you can use the remote controller's "speed +" and "speed -" keys to adjust the speed according to your needs. The data on the LED monitor will automatically cycle and display every 5 seconds while the walking pad is in use. 5. To stop the walking pad, press the "Start/Stop" button on the remote controller. 8 LED Monitor Instruction The LED window on the walking pad displays the following functions: A. Time Window: Shows time. Range: 0:00 - 99:59. The time indicator light is lit when displaying time. B. Speed Window: Shows speed. Range: 0.8 - 6.0 km/h. The speed indicator light is lit when displaying speed. C. Step Count Window: Shows distance data. Range: 0 - 99999. The distance indicator light is lit when displaying distance. D. Calories Window: Shows calories data. Range: 0 - 9999. The calorie indicator light is lit when displaying calories. E. Distance Window: Shows distance reading. Range: 0 - 9999. The distance indicator light is lit when displaying distance. F. Displays F01: Gentle vibration. Vibration level 1 indicator light is lit. G. Displays F02: Moderate vibration. Vibration level 2 indicator light is lit. H. Displays F03: Strong vibration. Vibration level 3 indicator light is lit. I. Displays F04: Intense vibration. Vibration level 4 indicator light is lit. 8 Description of Remote Control Buttons Remote control function buttons: power, start/stop, mode, speed increase and decrease.massage switch The "Power" button is used to turn off the walking pad when it is running. When the walking pad is in standby mode, pressing this button will turn off the display and enter sleep mode. The "Start/Stop" button is used to start or stop the walking pad. When the power is turned on, pressing this button in the stop state will start the walking pad. Pressing the button when the walking pad is running will stop the walking pad. The "Mode" button is used to select the countdown mode for time, distance or calorie, as well as a free mode. Pressing this button will cycle through the options…

Text truncated - open the document above for the full version.

BokangTechnologyCo.,LTD (2026-05-26) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor(FCCID:2BEX4-38AG) [BokangTechnologyCo.,LTD]certifiesthattheequipmentforwhichauthorizationis soughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,theequipmentdoes notutilizecyber-securityoranti-virussoftwarefromKasperskyLab,Inc,oranyofits successorsandassignees,whichisalsoonthe“coveredlist”. Sincerely, (Applicantsignature) (Applicantprintedname)YunqiangWu BokangTechnologyCo.,LTD (2026-05-06) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestfor(FCCID:2BEX4-38AG) [BokangTechnologyCo.,LTD]certifiesthat,asofthedateofthefilingoftheapplication, theapplicantisnotidentifiedontheCoveredListasanentityproducing“covered” equipment. Sincerely, (Applicantsignature) (Applicantprintedname)YunqiangWu

BokangTechnologyCo.,LTD AgentAuthorizationLetter 2026.05.26 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 USA RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorizeShenzhenMostTechnologyServiceCo.,Ltd.toact onourbehalfinallmattersrelatingtoapplicationforequipmentauthorization,includingthe signingofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuse Actof1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, Name:YunqiangWu Position:Manager CompanyName:BokangTechnologyCo.,LTD Address:No.467DongwuRoad,YongkangEconomicDevelopmentZone, JinhuaCity,ZhejiangProvince,China Tel/Fax15180459817 E-Mail:[email protected]

BokangTechnologyCo.,LTD LongTermConfidentialityRequestLetter 2026-05-26 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 USA RE:CONFIDENTIALITYREQUESTFOR(FCCID:2BEX4-38AG) ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459of CFR47.Wehaverequestedthatthe -e.g.Blockdiagram -e.g.SCH -e.g.OperationalDescription requiredtobesubmittedwiththisapplicationbepermanentlywithheldfrompublicreview. Theabovedocumentsarecompanyproprietaryinformationthatcouldnevergetinto thepossessionofyourcompetition. Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, Name:YunqiangWu Position:Manager CompanyName:BokangTechnologyCo.,LTD Address:No.467DongwuRoad,YongkangEconomicDevelopmentZone, JinhuaCity,ZhejiangProvince,China Tel/Fax15180459817 E-Mail:[email protected]

Modeldifferenceletter 2026.06.01 DearReviewer, ThisisanewApplicationfromBokangTechnologyCo.,LTD. ModelNo.:38AG,38AH,38AA,38AB,38AE Onlythemodel“38AG”wastested,Theirelectricalcircuitdesign,layout,componentsused andinternalwiringareidentical,OnlythemodelnamesandAppearanceColorisdifferent. Yourssincerely, Signatory: Name:YunqiangWu Position: Manager CompanyName: BokangTechnologyCo.,LTD Address: No.467DongwuRoad,YongkangEconomicDevelopmentZone, JinhuaCity,ZhejiangProvince,China Tel/Fax 15180459817 E-Mail: [email protected]

ModelNo.:38AG FRONTVIEWOFSAMPLE BACKVIEWOFSAMPLE ModelNo.:38AG LEFTVIEWOFSAMPLE RIGHTVIEWOFSAMPLE ModelNo.:38AG TOPVIEWOFSAMPLE BOTTOMVIEWOFSAMPLE ModelNo.:38AG PHOTOOFTHEENTIRESAMPLE

ModelNo.:38AG Page1of3 INTERNALPHOTOOFSAMPLE INTERNALPHOTOOFSAMPLEPCB ModelNo.:38AG Page2of3 INTERNALPHOTOOFSAMPLEPCB INTERNALPHOTOOFSAMPLEPCB ModelNo.:38AG Page3of3 INTERNALPHOTOOFSAMPLEPCB INTERNALPHOTOOFSAMPLEPCB Antennalocation

ShenzhenMostTechnologyServiceCo.,Ltd. EastA,1floorofNewAolinFactorybuiding,LangshanErlu,NorthDistrict, Hi-techIndustryPark,Nanshan,Shenzhen,Guangdong,China RFExposureEvaluationReport ReportReferenceNo. ....................... : FCCID.. ............................................... : MTEB25080216-H 2BEX4-38AG Compiledby (position+printedname+signature)..:FileadministratorsAlisaLuo Supervisedby (position+printedname+signature)..:TestEngineerSunnyDeng Approvedby (position+printedname+signature) .. : ManagerYvetteZhou Dateofissue ......................................... :Aug.18,2025 RepresentativeLaboratoryName . :ShenzhenMostTechnologyServiceCo.,Ltd. Address.................................................: No.5,2ndLangshanRoad,NorthDistrict,Hi-techIndustrialPark, Nanshan,Shenzhen,Guangdong,China. Applicant’sname ............................... : BokangTechnologyCo.,LTD Address.................................................: No.467DongwuRoad,YongkangEconomicDevelopmentZone, JinhuaCity,ZhejiangProvince,China Testspecification/Standard............: 47CFRPart1.1307;47CFRPart1.1310 KDB447498D01GeneralRFExposureGuidancev06 TRFOriginator......................................:ShenzhenMostTechnologyServiceCo.,Ltd. ShenzhenMostTechnologyServiceCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenMostTechnologyServiceCo.,Ltd.isacknowledgedascopyrightownerandsourceofthe material.ShenzhenMostTechnologyServiceCo.,Ltd.takesnoresponsibilityforandwillnotassume liabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialduetoits placementandcontext. Testitemdescription........................: ElectricTreadmill TradeMark ............................................ : N/A Model/Typereference ......................... : 38AG ListedModels ...................................... : 38AH,38AA,38AB,38AE ModulationType..................................: GFSK OperationFrequency .......................... : From2402MHzto2480MHz HardwareVersion ................................. V1.0 SoftwareVersion...................................V1.0.0 Rating.....................................................:AC110V,60Hz,500W Result.....................................................: PASS ReportNo.:MTEB25080216-HPage 2 of 5 TESTREPORT EquipmentunderTest:ElectricTreadmill Model/Type:38AG ListedModels:38AH,38AA,38AB,38AE Remark Onlythemodel38AGwastested,Theelectricalcircuitdesign, layout,componentsusedandinternalwiringareidentical,Onlythe modelnamesaredifferent. Applicant: BokangTechnologyCo.,LTD Address: No.467DongwuRoad,YongkangEconomicDevelopmentZone, JinhuaCity,ZhejiangProvince,China Manufacturer:BokangTechnologyCo.,LTD Address :No.467DongwuRoad,YongkangEconomicDevelopmentZone, JinhuaCity,ZhejiangProvince,China TestResult:PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. ReportNo.:MTEB25080216-HPage 3 of 5 1.RevisionHistory RevisionIssueDateRevisionsRevisedBy 002025.08.18InitialIssueAlisaLuo ReportNo.:MTEB25080216-HPage 4 of 5 2.SAREvaluation 2.1RFExposureComplianceRequirement 2.1.1StandardRequirement AccordingtoKDB447498D01GeneralRFExposureGuidancev06 4.3.1.StandaloneSARtestexclusionconsiderations UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures,standalone1-gheador bodyand10-gextremitySARevaluationforgeneralpopulationexposureconditions,bymeasurementor numericalsimulation,isnotrequiredwhenthecorrespondingSARExclusionThresholdcondition,listed below,issatisfied. 2.1.2Limits AccordingtoFCCPart1.1310:Thecriterialistedinthefollowingtableshallbeusedtoevaluatethe environmentimpactofhumanexposuretoradiofrequency(RF)radiationasspecifiedinpart1.1307(b) F=FrequencyinMHz FriisFormula Friistransmissionformula:Pd=(Pout*G)/(4*Pi*R2)Where Pd=powerdensityinmW/cm2 Pout=outputpowertoantennainmW G=gainofantennainlinearscale Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm2.Ifweknowthemaximumgainoftheantennaandthetotalpower inputtotheantenna,throughthecalculation,wewillknowthedistancerwheretheMPElimitisreached. ReportNo.:MTEB25080216-HPage 5 of 5 2.1.3EUTRFExposure BLE GFSK Testchannel PeakOutputPower (dBm) Tuneuptolerance (dBm) Maximumtune-upPower (dBm) Lowest(2402MHz)1.461.46±12.46 Middle(2440MHz)2.132.13±13.13 Highest(2480MHz)2.652.65±13.65 BLE Worstcase:GFSK Channel Maximum tune-upPower (dBm) Maximumtune-up Power (MW) AntennaGain (dBi) Power Density atR=20 cm (mW/cm2) LimitResult Highest(2480MHz)3.652.321.380.000631.0Pass Note:1)RefertoreportMTEB25080216-RforEUTtestMaxConductedaverageOutputPowervalue. Note:2)Pd=(Pout*G)/(4*Pi*R2)=(2.32*1.37)/(4*3.1416*20 2 )=0.00063 .......................THEENDOFREPORT.........................

TestingReport CustomerName:SHENZHENSHIXINZHONGXINTECHNOLOGY.CO. ,LTD ProductName: BT Antenna SampleModel:F- 9833 ReferenceStandard:GB/T9410-2008;ANSI/IEEEStd 149-1979 Issue Date: 20 24 .07. 12 Engineer: Date: 20 24 .07. 12 Auditor: Date: 20 24 .07. 12 Approver: Date: 20 24 .07. 12 1. GeneralInformation 1 . 1 GeneralInformationof testinginstitutions Name ShenzhenHetuoTechnologyCo . ,Ltd . Address Room1202 B , BuildingC6 , HengfengIndustrialCity , Xixiang, Ba oan District, Shenzhen Tel 18665849001 E- mail [email protected] Equipm ent Agilent507 1C 1.2 Testingprinciple Multi-probeOTA MeasurementSystem AntennaPhoto& Lenght(mm ) 1.3Testequipment Equipment ModelNo.SerialNo.Manufacturer Calibration date Next calibration date 24probe microwave chamber 4*3*3NASATIMO2024.05.292024.08.31 Network Analyzer 5071CNA Agilent 2024.05.29 2024.08.31 1.4Testenvironment Temperature 24 C± 1.5 C Humidity 45%RH Pressure 101kPa 1.5 BriefsummaryofProcedure Darkroom uppercomputer software Agilent Probe 1.SATIMOturnontheUpperComputerSoftware,Name:VeryView99.exe,VersionNo.:V1.10; 2.VeryView99viaGPIB(GeneralPurposeInterfaceBus)tocontroltheshieldingroom(darkroom)'sSATIMO; 3.Meanwhiel,GPIBcontroltheAgilent5071CtoreadtheAntennadataby24Probe; 4.Agilent5071Cwillanalysethedataandgeneratetheresult; 5.Agilent5071CwillfeedbacktoVeryView99softwaretogeneratethetestreport. 2. Sample Information 2.1 Client information Name SHENZHENSHIXINZHONGXIN TECHNOLOGY .CO .,LTD Address A1 , Shajing Donghuan Industrial Zone , Bao ' an District , Shenzhen Contacts Ma Chao Tel 18218809918 E-mail machao@ c- chip. com. cn 2.2 Description of EUT(S) Product Name BT Antenna Sample Model F-9833 Antenna Size 4.15*10.8mm Antenna Type PCB antenna Serial No. / Test Item Antenna Gain, Radiation pattern Frequency Range 2400-2500MHz Received Date 2024.07.12 Test Date 2024.07. 12 Remark The length of the RF cable is 50mm Thetestphotos Testdata 深圳市合拓科技有限公司 FrequencyID1234567891011 Frequency(MHz)2400.02410.02420.02430.02440.02450.02460.02470.02480.02490.02500.0 Efficiency(dBi)-6.11-5.71-5.24-4.83-4.95-4.85-4.97-5.11-5.08-5.12-5.17 Gain(dBi)-1.00-0.430.380.851.011.381.031.060.910.841.00 Efficiency(%)24.5126.8529.9532.9231.9732.7131.8530.8431.0630.7630.41 Directivity(dB)5.105.285.625.685.966.236.006.175.985.966.17 PeakGainPosition(Theta)135.00135.00135.00135.00135.00135.00135.00135.00120.00135.00135.00 PeakGainPosition(Phi)120.00120.00120.00135.00120.00120.00120.00120.0045.00120.0045.00 EfficiencyThetaPol(%)7.518.549.7311.1611.2711.8511.3311.0011.2010.9910.48 EfficiencyPhiPol(%)17.0018.3120.2221.7620.7120.8620.5319.8519.8619.7719.94 UpperHem.Efficiency(%)10.3111.6213.1814.2713.0412.8612.3912.1712.9512.6612.37 LowerHem.Efficiency(%)14.2015.2316.7618.6518.9319.8519.4718.6818.1118.1018.04 T90(H) 圆度 12.6814.1911.6710.9612.9313.9814.8314.8118.0217.9015.94 Gain15deg(dBi) E1(XZ) 波瓣宽度 96.23109.41106.9941.6939.4437.0533.6937.9332.5933.6433.77 E1(XZ) 前后比 3.142.623.383.684.164.354.864.935.665.886.34 E2(YZ) 波瓣宽度 88.2586.8544.8270.6264.6668.7969.1798.6927.1492.8586.79 E2(YZ) 前后比 1.692.212.642.743.272.682.311.641.101.441.98 最大增益处轴比 (P) 1.501.501.501.501.501.501.501.501.501.501.50 顶点 (Theta=0) 处轴比 (P)1.501.501.501.501.501.501.501.501.501.501.50 仰角 10 度最差 ( 大 ) 轴比 (P) 1.501.501.501.501.501.501.501.501.501.501.50 Hc(XY) 波瓣宽度 135.41123.80116.32120.15118.55113.64121.21122.80119.23123.42118.56 Hc(XY) 前后比 0.731.121.980.922.392.832.272.733.923.232.70 Empty 2400.0MHz Total, Eff: 24.5%Back View2400.0MHz Total(E1-XZ), Max= -2.49dBi2400.0MHz Total(E2-YZ), Max= -2.68dBiTotal(H-XY), Max= -2.75dBi, CirD=12.68 -1 -2.84 -4.69 -6.53 -8.37 -10.21 -12.06 -13.9 -15.74 -17.58 -19.42 -21.27 -23.11 -24.95 -26.79 -28.63 -30.48 -32.32 2410.0MHz Total, Eff: 26.9%Back View2410.0MHz Total(E1-XZ), Max= -2.71dBi2410.0MHz Total(E2-YZ), Max= -2.00dBiTotal(H-XY), Max= -2.07dBi, CirD=14.19 -0.43 -2.27 -4.12 -5.96 -7.8 -9.64 -11.49 -13.33 -15.17 -17.01 -18.85 -20.7 -22.54 -24.38 -26.22 -28.06 -29.91 -31.75 2420.0MHz Total, Eff: 29.9%Back View2420.0MHz Total(E1-XZ), Max= -2.12dBi2420.0MHz Total(E2-YZ), Max= -1.21dBiTotal(H-XY), Max= -1.17dBi, CirD=11.67 0.38 -1.46 -3.3 -5.14 -6.99 -8.83 -10.67 -12.51 -14.35 -16.2 -18.04 -19.88 -21.72 -23.56 -25.41 -27.25 -29.09 -30.93 2430.0MHz Total, Eff: 32.9%Back View2430.0MHz Total(E1-XZ), Max= -1.62dBi2430.0MHz Total(E2-YZ), Max= -0.82dBiTotal(H-XY), Max= -1.20dBi, CirD=10.96 0.85 -0.99 -2.83 -4.67 -6.51 -8.36 -10.2 -12.04 -13.88 -15.72 -17.57 -19.41 -21.25 -23.09 -24.94 -26.78 -28.62 -30.46 2440.0MHz Total, Eff: 32.0%Back View2440.0MHz Total(E1-XZ), Max= -0.97dBi2440.0MHz Total(E2-YZ), Max= -0.67dBiTotal(H-XY), Max= -1.16dBi, CirD=12.93 1.01 -0.83 -2.67 -4.52 -6.36 -8.2 -10.04 -11.88 -13.73 -15.57 -17.41 -19.25 -21.09 -22.94 -24.78 -26.62 -28.46 -30.3 2450.0MHz Total, Eff: 32.7%Back View2450.0MHz Total(E1-XZ), Max= -0.63dBi2450.0MHz Total(E2-YZ), Max= -1.08dBiTotal(H-XY), Max= -0.86dBi, CirD=13.98 1.38 -0.47 -2.31 -4.15 -5.99 -7.83 -9.68 -11.52 -13.36 -15.2 -17.04 -18.89 -20.73 -22.57 -24.41 -26.26 -28.1 -29.94 2460.0MHz Total, Eff: 31.9%Back View2460.0MHz Total(E1-XZ), Max= -0.49dBi2460.0MHz Total(E2-YZ), Max= -1.28dBiTotal(H-XY), Max= -1.37dBi, CirD=14.83 1.03 -0.81 -2.65 -4.5 -6.34 -8.18 -10.02 -11.86 -13.71 -15.55 -17.39 -19.23 -21.07 -22.92 -24.76 -26.6 -28.44 -30.29 2470.0MHz Total, Eff: 30.8%Back View2470.0MHz Total(E1-XZ), Max= -0.95dBi2470.0MHz Total(E2-YZ), Max= -1.78dBiTotal(H-XY), Max= -1.79dBi, CirD=14.81 1.06 -0.78 -2.62 -4.46 -6.31 -8.15 -9.99 -11.83 -13.67 -15.52 -17.36 -19.2 -21.04 -22.88 -24.73 -26.57 -28.41 -30.25 2480.0MHz Total, Eff: 31.1%Back View2480.0MHz Total(E1-XZ), Max= -0.65dBi2480.0MHz Total(E2-YZ), Max= -1.54dBiTotal(H-XY), Max= -1.77dBi, CirD=18.02 0.91 -0.94 -2.78 -4.62 -6.46 -8.3 -10.15 -11.99 -13.83 -15.67 -17.52 -19.36 -21.2 -23.04 -24.88 -26.73 -28.57 -30.41 2490.0MHz Total, Eff: 30.8%Back View2490.0MHz Total(E1-XZ), Max= -1.14dBi2490.0MHz Total(E2-YZ), Max= -1.65dBiTotal(H-XY), Max= -1.93dBi, CirD=17.90 0.84 -1.01 -2.85 -4.69 -6.53 -8…

Text truncated - open the document above for the full version.

ShenzhenMostTechnologyServiceCo.,Ltd. No.5,2ndLangshanRoad,NorthDistrict,Hi-techIndustrialPark,Nanshan, Shenzhen,Guangdong,China. TESTREPORT FCCRulesPart15.247 ReportReferenceNo........................: FCCID................................................: MTEB25080216-R 2BEX4-38AG Compiledby (position+printedname+signature)..: Fileadministrators EkaterinaZhang Supervisedby (position+printedname+signature) .. :TestEngineerSunnyDeng Approvedby (position+printedname+signature) .. : ManagerYvetteZhou Dateofissue.........................................:Aug.18,2025 RepresentativeLaboratoryName . :ShenzhenMostTechnologyServiceCo.,Ltd. Address ................................................. : No.5,2ndLangshanRoad,NorthDistrict,Hi-techIndustrialPark, Nanshan,Shenzhen,Guangdong,China. Applicant’sname...............................: BokangTechnologyCo.,LTD Address ................................................. : No.467DongwuRoad,YongkangEconomicDevelopmentZone, JinhuaCity,ZhejiangProvince,China Testspecification/Standard ............ : FCCRulesPart15.247 TRFOriginator......................................:ShenzhenMostTechnologyServiceCo.,Ltd. ShenzhenMostTechnologyServiceCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenMostTechnologyServiceCo.,Ltd.isacknowledgedascopyrightownerandsourceofthe material.ShenzhenMostTechnologyServiceCo.,Ltd.takesnoresponsibilityforandwillnotassume liabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialduetoits placementandcontext. Testitemdescription........................: ElectricTreadmill TradeMark...........................: N/A Model/Typereference ......................... : 38AG ListedModels ..................................... : 38AH,38AA,38AB,38AE ModulationType..................................: GFSK OperationFrequency..........................:From2402MHzto2480MHz HardwareVersion....................................V1.0 SoftwareVersion.....................................V1.0.0 Rating ..................................................... :AC110V,60Hz,500W Result.....................................................:PASS ReportNo.:MTEB25080216-RPage 2 of 40 TESTREPORT EquipmentunderTest:ElectricTreadmill Model/Type:38AG ListedModels:38AH,38AA,38AB,38AE Remark Onlythemodel38AGwastested,Theelectricalcircuitdesign, layout,componentsusedandinternalwiringareidentical,Onlythe modelnamesaredifferent. Applicant:BokangTechnologyCo.,LTD Address: No.467DongwuRoad,YongkangEconomicDevelopmentZone, JinhuaCity,ZhejiangProvince,China Manufacturer:BokangTechnologyCo.,LTD Address : No.467DongwuRoad,YongkangEconomicDevelopmentZone, JinhuaCity,ZhejiangProvince,China TestResult : PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. ReportNo.:MTEB25080216-RPage 3 of 40 Contents 1.REVISIONHISTORY.........................................................................................................................4 2.TESTSTANDARDS............................................................................................................................5 3.SUMMARY...............................................................................................................................................6 3.1.GeneralRemarks.........................................................................................................................................6 3.2.ProductDescription....................................................................................................................................6 3.3.EquipmentUnderTest................................................................................................................................6 3.4.ShortdescriptionoftheEquipmentunderTest(EUT)............................................................................6 3.5.EUToperationmode....................................................................................................................................7 3.6.BlockDiagramofTestSetup......................................................................................................................7 3.7.TestItem(EquipmentUnderTest)Description*.......................................................................................7 3.8.AuxiliaryEquipment(AE)Description.......................................................................................................7 3.9.AntennaInformation*..................................................................................................................................8 3.10.EUTconfiguration......................................................................................................................................8 3.11.Modifications..............................................................................................................................................8 4.TESTENVIRONMENT.......................................................................................................................9 4.1.Addressofthetestlaboratory...................................................................................................................9 4.2.Environmentalconditions...........................................................................................................................9 4.3.TestDescription.........................................................................................................................................10 4.4.Statementofthemeasurementuncertainty...........................................................................................10 4.5.EquipmentsUsedduringtheTest...........................................................................................................11 5.TESTCONDITIONSANDRESULTS.....................................................................................12 5.1.ACPowe…

Text truncated - open the document above for the full version.

ModelNo.:38AG CETESTSETUP RETESTSETUP ModelNo.:38AG RETESTSETUP