2BEXF-DS1Door And Window Sensor

V6 .P.02.Z Door & Window Sensor Quick Start Guide Note: This product can not use alone and need to work with Loocam Gateway. Contents EN ES 01 07 FR IT 11 DE 15 21 NL 25 Note: Pictures are for reference only, please refer to the actual product. Tip: The anti-tamper key will turn on after the base is mounted on the wall and will not be triggered until the base is removed. 1. What’s in the Box 2. Product Introduction Quick Start Guide 3M3M3M3M 3M3M3M3M 3M3M3M3M 3M3M3M3M Doo r & Windo w Senso rQui ck Start Guide3M Adhesive Pad Reset Button Status Indi cator Mag net Base Bat tery Compartment Cover Anti-tamper Key 1 -English Download Loocam App Scan the QR code below with your smartphone or search in the App Store or Google Play to download Loocam app. 1. Connect WiFi to your phone. 2. Please follow the corresponding adding operation to add gateway to the App. 3. Enter the Gateway interface and select “Add Sensor”— “Door & Window Sensor”. Add Devices 3. Ho w t o Use? 2 -English 4. Remove the battery slot cover (as shown in the picture), power on the device after taking out the insulating sheet. 5. Press and hold the Reset Button for about 5 seconds until the red light flashes on the device and release it. Then press the button one more time and you will see the blue light flashes on the device. At this time, the device enters the pairing mode. Important Notice: When replacing the battery, please use insulated tools to remove the battery. Do not use metal tools for prying the battery to avoid short-circuiting and damaging the motherboard. Indicator Light Description Status Paring/Upgrading Reseting ColorFeature Blue LightFlash FlashRed Light 3 -English You can install the product on doors, windows, cabinets and other scenes, please install the base on a fixed door or window, the specific method is shown in the picture. Installation location is for reference only, the specific usage location is subject to user requirements. Note: • Please do not install the sensor in outside where is unstable or raining. • Please do not install the sensor next to the metallic magnet or others that may interfere with the sensor's operation. 4. Installation Inst allation locati on is for reference only 4 -English 5 -English NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help 6 -English Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Nota: Las imágenes son para referencia, por favor consulte al producto real. Consejo: La llave antisabotaje se encenderá después de montar la base en la pared y no se activará hasta que se retire la base. 1. Lista de empaque 2. Presentación del producto Quick Start Guide 3M3M3M3M 3M3M3M3M 3M3M3M3M 3M3M3M3M Sensor para Puerta & Ventana Manual de instruccionesAlmohadilla a dhesiva 3M Botón de reinicio Luz indicadora Imán Base Tapa de la ranura de pila Llave antisabotaje 7 -Español Descargar la aplicación Loocam Escanee el siguiente código QR con su teléfono móvil o búsquela en App Store o Google Play para descargar la aplicación Loocam. 1. Conecte la red WiFi a su teléfono móvil. 2. Siga las operaciones correspondientes para añadir el gateway a la aplicación. 3. Entre en la interfaz del gateway y seleccione "Añadir sensor", y " Sensor de Puerta & Ventana". Añadir dispositivos 3. ¿Cómo utilice? 8 -Español 4. Retire la tapa de la ranura de pila (como se muestra en la imagen), encienda el dispositivo después de retirar la lámina aislante. 5. Mantenga pulsado el botón de reinicio durante unos 5 segundos hasta que la luz roja parpadee en el dispositivo y suéltelo. A continuación, pulse el botón una vez más y verá que la luz azul parpadea en el dispositivo. En este momento, el dispositivo entra en el modo de emparejamiento. Aviso importante: Cuando cambie la batería, por favor utilice herramientas aislantes para extraerla. No utilice herramientas metálicas para hacer palanca en la batería para evitar cortocircuitos y daños en la placa base. Descripción de la luz indicadora Estado Emparejando /Actualizando Restableciendo ColorCaracterística Luz azulParpadear ParpadearLuz roja 9 -Español Puede instalar el producto en puertas, ventanas, armarios y otras escenas, por favor instale la base en una puerta o ventana fija, el método específico se muestra en la imagen. La ubicación de la instalación es para referencia, la ubicación de uso específica está sujeta a los requisitos de usuario. Nota: • Por favor no instale el sensor en el exterior donde es inestable o llueve. • Por favor no instale el sensor junto al imán metálico u otros que puedan interferir con el funcionamiento del sensor. 4. Instalación La ubicación de la instalació…

Text truncated - open the document above for the full version.

Zhuhai Loocam Technology Co., Ltd. D3a-1 4th Floor, Comprehensive Building, No. 2, Qianwan 2nd Road, Tangjiawan Town, High-tech Zone, Zhuhai City, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Mar. 06,2024 FCC ID: 2BEXF-DS1 Ref. #1: Attestation Statements Part 2.911(dX5)(i) Filing ("Zhuhai Loocam Technology Co., Ltd.") certifies that the equipment for which authorization is sought is not "covered" equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements ?art 2.91.1{dX5Xii) FilinS ("Zhuha! Loocam Technology Co., Ltd.") certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing "covered" equipment. Applicant: Zhuhai Loocam Technology Co., Ltd. Address: D3a-14th Floor, Comprehensive Building, No. 2, Qianwan 2nd Road, Tangjiawan Town, High-tech Zone, Zhuhai City, China Contact Person: Zhang Side Tel.: +86-756-6259750 Email: [email protected] Sincerely, signature: ilr,1 Siile

Zhuhai Loocam Technology Co., Ltd. D3a-1 4th Floor, Comprehensive Building, No. 2, Qianwan 2nd Road, Tangjiawan Town, High-tech Zone, Zhuhai City, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Mar. 06,2024 FCC ID: 2BEXF-DS1 Ref. #1: Attestation Statements Part 2.911(dX5)(i) Filing ("Zhuhai Loocam Technology Co., Ltd.") certifies that the equipment for which authorization is sought is not "covered" equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements ?art 2.91.1{dX5Xii) FilinS ("Zhuha! Loocam Technology Co., Ltd.") certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing "covered" equipment. Applicant: Zhuhai Loocam Technology Co., Ltd. Address: D3a-14th Floor, Comprehensive Building, No. 2, Qianwan 2nd Road, Tangjiawan Town, High-tech Zone, Zhuhai City, China Contact Person: Zhang Side Tel.: +86-756-6259750 Email: [email protected] Sincerely, signature: ilr,1 Siile

Section 2.911(dX7) USAAgent for Service of Process Company name: Zhuhai Loocam Technology Co., Ltd. Address: D3a-1 4th Floor, Comprehensive Building, No. 2, Qianwan 2nd Road, Tangjiawan Town, Hightech Zane, Zhuhai City, China Product Name: DoorAnd \Mndow Sensor FCC lD: 2BEXF-DS1 Model(s): DS1 2.911(dX7) USA Designated Agent for Service of Process We, [Zhuhai Loocam Technology Co., Ltd.] ("the applicant") designate [Loocam Technology LLCI ruorut for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proeeeding involving the equipment, whichever is later. Applicant Company name: Zhuhai Loocam Technology Co., Ltd. Address: D3a-1 4th Floor, Comprehensive Building, No. 2, Qianwan 2nd Road, Tangjiawan Town, Hightech Zone, ZhuhaiCity, China FRN:0034846840 Contact Name: Bin Zhou Telephone No: 657-223-3477 Email: Iavender@loocam. com Email: [email protected] Signature: Title: Manager Date: Mar. 06,2024 Signature: Title: Manager Date: Mar. 06,2024 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02lOGt23 https://www.federalreoister.qov/documents/2023/02106/2022-28263/protecting-against-nation al-secu ritv-th reats-to-the-commu n ication s-supply-chai n -th rouq h-the 2.911 (dX7)USA Agent v1.2

Zhuhai Loocam Technology Co., Ltd. D3a-1 4th Floor, Comprehensive Building, No. 2, Qianwan 2nd Road, Tangjiawan Town, High-tech Zone, Zhuhai City, China Agent Authorization Company: Zhuhai Loocam Technology Co., Ltd. Address: D3a-1 4th Floor, Comprehensive Building, No. 2, Qianwan 2nd Road, Tangjiawan Town, High-tech Zone, Zhuhai City, China Product Name: Door And Window Sensor Model Number(s): DS1 Product Description: Door And Window Sensor We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Mar. 06, 2024 Name: Zhang Side Title: General Manager Company: Zhuhai Loocam Technology Co., Ltd.

D3a-1 4th Froor, comprehensive Bu,tdins, ^iill*:i"aTzl:'xl:ft*"r, a\*n rown. Hish-rech zone, zhuhaicity, china Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 13,2024 Subject; Request for Confidentiality FCC lD: 2BEXF-DSl To Whom lt May Concern, Pursuant to the provisions of the Commission's rules Title 47 Sections 50.457 and $0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. X Schematic Diagram X Block Diagram ffi Operational Description ln additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 52.803 and the importation rules in Title 47 CFR 52.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); I External Photos I Test Setup Photos I lnternal Photos f User Manual f f or 45 days, pursuant to Public Notice DA 04-1705. OR f for 180 days pursuantto KDB 726920D01. It is our undersianding that all measurement test reports, FCC lD label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Zhang Side Title: Manager il'g siile

Report No.: AGC06662231206AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC06662231206AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC06662231206AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC06662231206AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 10mm*20mm FCC ID: 2BEXF-DS1

Report No.: AGC06662231206AP02 Page 1 of 3 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) BATTERY VIEW OF EUT (FIGURE 1) Report No.: AGC06662231206AP02 Page 2 of 3 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) Report No.: AGC06662231206AP02 Page 3 of 3 INTERNAL VIEW OF EUT (FIGURE 3) ****************************************End of Report************************************* Zigbee Antenna

Page 1 of 10 RF Exposure Report Report No.: AGC06662231206FH01 FCC ID : 2BEXF-DS1 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Door And Window Sensor BRAND NAME : MODEL NAME : DS1 APPLICANT : Zhuhai Loocam Technology Co., Ltd. DATE OF ISSUE : Mar. 25, 2024 STANDARD(S) : FCC Part 2 Subpart J §2.1093 FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC06662231206FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 25, 2024 Valid Initial Release Report No.: AGC06662231206FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC06662231206FH01 Page 4 of 10 1. General Information Applicant Zhuhai Loocam Technology Co., Ltd. Address D3a-1 4th Floor, Comprehensive Building, No. 2, Qianwan 2nd Road, Tangjiawan Town, High-tech Zone, Zhuhai City, China Manufacturer Ansjer Electronics Co., Ltd Address No.5 WanLi Road, SanXiang, ZhongShan 528463, Guangdong, China Factory Ansjer Electronics Co., Ltd Address No.5 WanLi Road, SanXiang, ZhongShan 528463, Guangdong, China Product Designation Door And Window Sensor Brand Name Test Model DS1 Series Model(s) N/A Difference Description N/A Date of receipt of test item Dec. 22, 2023 Date of Test Dec. 22, 2023- Mar. 25, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Alan Duan (Project Engineer) Mar. 25, 2024 Reviewed By Calvin Liu (Reviewer) Mar. 25, 2024 Approved By Max Zhang (Authorized Officer) Mar. 25, 2024 Report No.: AGC06662231206FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: Zigbee : 2.405GHz ~ 2.480GHz Hardware Version MB-DS-V03 Software Version 108 Modulation Type GFSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain 1.93dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC06662231206FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC06662231206FH01 Page 7 of 10 3.3 Environmental Conditions NORMAL CONDITIONS Temperature range (°C) 15 - 35 Relative humidity range 20 % - 75 % Pressure range (kPa) 86 - 1…

Text truncated - open the document above for the full version.

WIFI Antenna Tes t Report 20 11.12.0 6 March 12, 2024 Manufacturer in formatio n Project Door And Window sensor 2.4G onboard antenna report Antenna typeDIPOLE Product Descrip tio n The size of the onboard antenna is 14.4MM x 5.4MM Product No PB1405A-PCB-A Antenna frequency band 2400MHz-2500MHz Ansjer Electronics Co., Ltd Ansjer Electronics Co., Ltd Purpose This re port is to measure the perf ormance of antenna for All test date are showed as below. Content Antenna schematic diagra m Antenna size diagra m Smith Chart GAIN & Efficiency 2 Ansjer Electronics Co., Ltd 3 1. Product Overvi ew 1.1 Antenna schematic diagra m Ansjer Electronics Co., Ltd 4 1. Product Overvi ew 1.2 Antenna size diagra m Ansjer Electronics Co., Ltd 5 2. Test Result Fr equency (MHz) 240024502500 VSWR 1 .372.04 3.59 2.1 2.4G antennaVSWR Ansjer Electronics Co., Ltd 6 2. Test Result 2.2 2.4G antenna RETRUN LOSS Fr equency (MHz) 240024502500 RETRUN LOSS （DB） -16.04-9.28-4.96 Ansjer Electronics Co., Ltd 7 2. Test Result 2.3 2.4G antenna Smith Chart Fr equency (MHz) 240024502500 3 8.1734.7618.07 Ansjer Electronics Co., Ltd 8 2. Test Result 2.4 2.4G antenna GAIN & Effic ie ncy FreqEffiGain (MHz)(%)(dBi) 2 400 43.011.43 2410 47.21.01 2420 43.381.93 2430 44.851.45 2440 48.681.88 2450 46.971.54 2460 44.911.68 2470 43.161.53 2480 46.541.81 2490 46.911.81 2500 44.911.25 Ansjer Electronics Co., Ltd

Page 1 of 50 FCC Test Report Report No.: AGC06662231206FR01 FCC ID : 2BEXF-DS1 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Door And Window Sensor BRAND NAME : MODEL NAME : DS1 APPLICANT : Zhuhai Loocam Technology Co., Ltd. DATE OF ISSUE : Mar. 25, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC06662231206FR01 Page 2 of 50 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 25, 2024 Valid Initial Release Report No.: AGC06662231206FR01 Page 3 of 50 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ..................................................................................................................... 6 2.2 Test Frequency List ..................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ................................................................................................................. 7 2.4 Test Methodology......................................................................................................................................... 7 2.5 Special Accessories ..................................................................................................................................... 7 2.6 Equipment Modifications ............................................................................................................................. 7 2.7 Antenna Requirement .................................................................................................................................. 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of the Test Laboratory .................................................................................................................... 8 3.2 Test Facility .................................................................................................................................................. 8 3.3 Environmental Conditions ........................................................................................................................... 9 3.4 Measurement Uncertainty ........................................................................................................................... 9 3.5 List of Equipment Use ............................................................................................................................... 10 4.System Test Configuration ............................................................................................................................ 12 4.1 EUT Configuration ..................................................................................................................................... 12 4.2 EUT Exercise ............................................................................................................................................. 12 4.3 Configuration of Tested System ................................................................................................................ 12 4.4 Equipment Used In Tested System ........................................................................................................... 12 4.5 Summary of Test Results ........................................................................................................................... 13 5. Description of Test Modes ........................................................................................................................... 14 6. Duty Cycle Measurement ............................................................................................................................. 15 7. RF Output Power Measurement .................................................................................................................. 16 7.1 Provisions Applicable ................................................................................................................................. 16 7.2 Measurement Procedure ........................................................................................................................... 16 7.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 16 7.4 Measurement Result ................................................................................................................................. 17 8. 6dB Bandwidth Measurement ...................................................................................................................... 20 8.1 Provisions Applicable ................................................................................................................................. 20 8.2 Measurement Procedure ........................................................................................................................... 20 8.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 20 8.4 Measurement Results ................................................................................................................................ 21 9. Power Spectral Density Measurement ........................................................................................................ 25 9.1 Provisions Applicable .......................................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC06662231206AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC06662231206AP01 Page 2 of 2 RF CONDUCTED TEST SETUP ****************************************End of Report*************************************