2BEYB-TP-WE-WRB2ILTE800 Digital Wireless Repeater

1 TETRA800 Digital Wireless Repeater Installation Manual (Model: TP-WE-WR-DSL080B220P43Q-UK-MW) 2 Copyright Notice Our company reserves all rights to this manual. No unit or individual may excerpt or copy part or all of this manual (including the electronic version) without the written permission of the company, or disseminate it in any form. This manual is for reference only. Due to product changes or upgrades and other reasons, the company has the right to change the content of the instructions without notifying the customer. Any changes will be made without prior notice. This instruction manual introduces the installation, use and maintenance methods of digital wireless equipment. Please read this manual carefully before installing and using this equipment. Guidelines for safe use of equipment 1. The device must be powered off before connecting the antenna to the device or disconnecting the cable. The RF signal interface is strictly prohibited from being unloaded. 2. Do not disassemble the device or replace parts at will to avoid damaging the device. 3. Do not touch the components on the chassis, the wiring, and the metal conductors in the plug socket with your hands. When it must be touched due to maintenance needs, electrostatic protection measures should be taken. 4. Communication equipment must be protected against strong electricity and lightning strikes to avoid introducing strong electricity or lightning into the equipment. 5. The battery switch is in the structural part of the indicator light. There is no need to open the chassis door to operate the battery switch. If this switch is not turned on, the monitoring board will not work. 6. It is prohibited to insert or remove cards from the MODEM when it is powered on. 3 Signal booster advisory/warning label message: Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. WARNING! Use only authorized and approved antennas, cables and/or coupling devices! The use of unapproved antennas, cables or coupling devices could cause damage and may be of violation of FCC regulations. The use of unapproved antennas, cables and/or coupling devices is illegal under FCC regulations and may subject the user to fines. Any installation, adjustment, maintenance and repair of the equipment must only be carried out by trained, authorized personnel. At all times, personnel must comply with any safety notices and instructions. The design of the antenna installation needs to be implemented in such a way so as to ensure RF radiation safety levels and non-environmental pollution during operation. Note: Antennas, feeders and couplers are not included in the packing list; solution provider should consider these accessories according to site conditions. WARNING! Antenna gain should not exceed 10dBi To comply with FCC RF exposure compliance requirements, each individual antenna used for this transmitter must be installed to provide a separation distance greater than 211cm or more from all persons during normal operation and must not be co-located with any other antenna for meeting RF exposure requirements. Contact information, i.e., licensee for Class B devices. the FCC at (https://signalboosters.fcc.gov/signal-boosters/) for Class B devices. 4 Table of Contents 1. Product Introduction ................................................................................................................................................... 4 1.1 Specification ...................................................................................................................................................... 4 1.2 Chassis Appearance ...................................................................................................................................... 6 1.3 Outline Drawing ................................................................................................................................................. 6 1.4 Interface Introduction ....................................................................................................................................... 6 1.5 Status Indicator ................................................................................................................................................. 7 2. Hardware Installation .................................................................................................................................................. 7 2.1 Wall - mounted installation ............................................................................................................................... 7 3. Local Configuration ...................................................................................................................................................... 8 3.1 Connection for Local Configuration................................................................................................................... 8 3.2 Login OMT ......................................................................................................................................................... 9 3.3 User Interface Introduction ............................................................................................................................. 10 4. Common Problems and Solutions ............................................................................................................................. 12 1. Product Introduction This wireless repeater is designed to expand mobile base station’s service in indoor environment, such as houses, hotels, hot spots, shops, offices, meeting rooms, apartments, etc.. It is compact and light, it can be installed anywhere, with maximum discretion. Features: ➢ Support TETRA800 Band ➢ Low power consumption ➢ Compact design ➢ Support easy installation, configuration 1.1 Specification Elect…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Comba Network (Singapore) Pte Ltd Address 80 Playfair Road, Kapo Factory Building, #01-18. , Singapore, 367998, Singapore FRN 0034852616 Grantee Code 2BEYB FCC ID 2BEYB-TP-WE-WRB9B, 2BEYB-TP-WE-WRB2I Authorized Contact Name Chun Keat Leow Contact Email [email protected] Contact Phone +65 63454908 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Comba Network (Singapore) Pte Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Comba Network (Singapore) Pte Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: Date: 2024/2/2 Print Name: Chun Keat Leow Title: Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 2024/2/2 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Comba Network (Singapore) Pte Ltd Company Name: Comba Telecom FRN: 0034852616 FRN: 0033713108 Grantee Code: 2BEYB Contact Name: Chun Keat Leow Contact Name Matthew Lunny Address: 80 Playfair Road, Kapo Factory Building, #01-18. Address: 568 Gibraltar Drive, Milpitas, CALIFORNIA City/Province/Zip: Singapore, -, 367998 City/Province/Zip: Milpitas Telephone: +65 63454908Telephone: 214 250 2658 Fax: - Fax: Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: 2BEYB-TP-WE-WRB9B FCC ID: 2BEYB-TP-WE-WRB2I ATTN: Director of Certification: We, Comba Network (Singapore) Pte Ltd and Comba Telecom understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Comba Network (Singapore) Pte Ltd and Comba Telecom acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Chun Keat Leow Name (Printed): Title: Manager Title: Signature: Signature: Matthew Lunny General Manager

Comba Network (Singapore) Pte Ltd Attestation letter To whom it may concern, Regarding: Request application for FCC ID: 2BEYB-TP-WE-WRB2I, We Comba Network (Singapore) Pte Ltd declare that warning label messages will be also shown in online and point-of-sale marketing materials and on outside packaging of device. Warning label for Part 20 signal boosters, Name (Printed): Chun Keat Leow Title: Manager Signature: On behalf of Company: Comba Network (Singapore) Pte Ltd

Comba Network (Singapore) Pte Ltd Authority letter FCC Date: 2024/2/2 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2BEYB-TP-WE-WRB9B FCC ID: 2BEYB-TP-WE-WRB2I To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Bonnie Liao in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with applicant company FCC. This authorization is valid until further written notice from the applicant. Name (Printed): Chun Keat Leow Title: Manager Signature: On behalf of Company: Comba Network (Singapore) Pte Ltd

Comba Network (Singapore) Pte Ltd Confidential letter FCC To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Comba Network (Singapore) Pte Ltd 80 Playfair Road, Kapo Factory Building, #01-18. , Singapore, 367998, Singapore Regarding: Confidentiality Request regarding application for FCC ID: 2BEYB-TP-WE-WRB9B FCC ID: 2BEYB-TP-WE-WRB2I LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Tune Up The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Name (Printed): Chun Keat Leow Title: Manager Signature: On behalf of Company: Comba Network (Singapore) Pte Ltd

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 1 of 4 FCC ID: 2BEYB-TP-WE-WRB9B 2BEYB-TP-WE-WRB2I Appendix - External Photos for GZCR2310001046AT Test Model No.: TP-WE-WR-DSL080B220P43Q-UK-MW SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 4 of 4 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 1 of 6 FCC ID: 2BEYB-TP-WE-WRB9B 2BEYB-TP-WE-WRB2I Appendix - Internal Photos for GZCR2310001046AT Test Model No.: TP-WE-WR-DSL080B220P43Q-UK-MW SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 2 of 6 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 6 of 6 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR231000104604 Page: 1 of 10 FCC ID: 2BEYB-TP-WE-WRB9B 2BEYB-TP-WE-WRB2I Ricky Liu Manager RF EXPOSURE EVALUATION REPORT Application No.: GZCR2310001046AT Applicant: Comba Network (Singapore) Pte Ltd Address of Applicant: 80 Playfair Road, Kapo Factory Building, #01-18. Singapore 367998 Manufacturer: COMBA NETWORK SYSTEMS COMPANY LTD Address of Manufacturer: No.10, Shenzhou Road, Guangzhou Science City, Guangzhou, Guangdong, P.R. China Factory: COMBA NETWORK SYSTEMS COMPANY LTD Address of Factory: No.10, Shenzhou Road, Guangzhou Science City, Guangzhou, Guangdong, P.R. China Equipment Under Test (EUT): EUT Name: LTE800 Digital Wireless Repeater Model No.: TP-WE-WR-DSL080B220P43Q-UK-MW Trade Mark: Comba Standard(s) : 47 CFR Part 2.1091 47 CFR Part 1.1310, Part 1.1307 Date of Receipt: 2023-10-11 Date of Evaluation: 2023-11-14 Date of Issue: 2024-04-08 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR231000104604 Page: 2 of 10 Revision Record VersionReport No.DateRemark 01GZCR2310001046042024-04-08Original Authorized for issue by: Kevin Zhang/Project Engineer Jerry Chan/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR231000104604 Page: 3 of 10 2Evaluation Summary Radio Spectrum Technical Requirement ItemStandardRequirementMethodResult RF Exposure 47 CFR Part 2.1091 47 CFR Part 1.1310 47 CFR Part 1.1307 47 CFR Part 1.131047 CFR Part 1.1310PASS Note: E.U.T./ EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR231000104604 Page: 4 of 10 3Contents Page 1Covers Page................................................................................................................................................1 2Evaluation Summary..................................................................................................................................3 3Contents......................................................................................................................................................4 4General Information....................................................................................................................................5 4.1Details of E.U.T...................................................................................................................................5 4.2Evaluated Location............................................................................................................................5 4.3Test Facility........................................................................................................................................6 4.4Deviation from Standards.................................................................................................................6 4.5Abnormalities from Standard Conditions........................................................................................6 5Radio Spectrum Technical Requirement..................................................................................................7 5.1RF Exposure.......................................................................................................................................7 5.1.1Requirement....................................................................................................................................7 5.1.2Method.............................................................................................................................................8 5.1.3Conclusion.......................................................................................................................................8 5.2EUT Constructional Details (EUT Photos).....................................................................................10 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR231000104604 Page: 5 of 10 4General Information 4.1Details of E.U.T. Power Supply:AC 120V, 50~60Hz Cable: AC mains (1.5m, unshielded) Operating Temperature:-25 to +55 °C Operating Humidity:5% to 95% RF Characters:Refer to report GZCR231000104602 & GZCR231000104603 4.2Evaluated Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, No.198, Kezhu Road, Science City, Economic & Technological Development Area, Guangzhou, Guangdong, China 510663 Tel: +86 20 82155555 No tests were sub-contracted. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR231000104604 Page: 6 of 10 4.3Test Facility The test facility is recognized, certified, or accredited by the following organizations: ● ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian/New Zealand Regulatory Compliance Mark (RCM). ● SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO Have approved SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a supplier of EMC TESTING SERVICES and SAFETY TESTING SERVICES. ● FCC Recognized Accredited Test Firm(Registration No.: 486818) SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been accredited and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Designation Number: CN5016, Test Firm Registration Number: 486818. ● ISED (Registration No.: 4620B, CAB identifier: CN0052) SGS-CSTC Standards Technical Services Co., Ltd., has been registered by Innovation Science …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR231000104603 Page: 1 of 20 FCC ID: 2BEYB-TP-WE-WRB2I Ricky Liu Manager TEST REPORT Application No.: GZCR2310001046AT Applicant: Comba Network (Singapore) Pte Ltd Address of Applicant: 80 Playfair Road, Kapo Factory Building, #01-18. Singapore 367998 Manufacturer: COMBA NETWORK SYSTEMS COMPANY LTD Address of Manufacturer: No.10, Shenzhou Road, Guangzhou Science City, Guangzhou, Guangdong, P.R. China Factory: COMBA NETWORK SYSTEMS COMPANY LTD Address of Factory: No.10, Shenzhou Road, Guangzhou Science City, Guangzhou, Guangdong, P.R. China Equipment Under Test (EUT): EUT Name: LTE800 Digital Wireless Repeater Model No.: TP-WE-WR-DSL080B220P43Q-UK-MW Trade Mark: Comba Standard(s) : 47 CFR Part 2 47 CFR Part 20 47 CFR Part 90 Date of Receipt: 2023-10-11 Date of Test: 2023-10-16 to 2023-11-10 Date of Issue: 2024-04-08 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR231000104603 Page: 2 of 20 Revision Record VersionReport No.DateRemark 01GZCR2310001046032024-04-08Original Authorized for issue by: Kevin Zhang/Project Engineer Jerry Chan/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR231000104603 Page: 3 of 20 2Test Summary ItemStandardMethodRequirementResult Out-of-band rejection KDB935210 D05 v01r04 KDB935210 D05 v01r04 clause 3.3 KDB935210 D05 v01r04 clause 3.3 Pass Input-versus-output signal comparison 47 CFR Part 2 KDB935210 D05 v01r04 clause 3.4 Part 2.1049Pass Mean output power and amplifier/booster gain KDB935210 D05 v01r04 clause 3.5 Part 90.635Pass Out-of-band/out-of- block(including intermodulation) emissions KDB935210 D05 v01r04 clause 3.6 Part 90.691Pass Conducted spurious esmissions KDB935210 D05 v01r04 clause 3.6 Part 90.691Pass Frequency stability 47 CFR Part 2.1055 KDB935210 D05 v01r04 clause 3.7 ANSI C63.26-2015 Clause 5.6 Part 90.213Pass Radiated spurious emissions 47 CFR Part 90 KDB935210 D05 v01r04 clause 3.8 ANSI C63.26-2015 Clause 5.5 Part 90.691Pass Note: E.U.T./ EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. The present report covers requirements for 817-824MHz/862-869MHz. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR231000104603 Page: 4 of 20 3Contents Page 1 Covers Page................................................................................................................................................1 2Test Summary.............................................................................................................................................3 3Contents......................................................................................................................................................4 4General Information....................................................................................................................................6 4.1Details of EUT..................................................................................................................................................6 4.2Description of Support Units.......................................................................................................................6 4.3Test Environment...........................................................................................................................................7 4.4Measurement Uncertainty............................................................................................................................7 4.5Test Signals and Test Channels.................................................................................................................8 4.6Test Location...................................................................................................................................................9 4.7Test Facility......................................................................................................................................................9 4.8Deviation from Standards............................................................................................................................9 4.9Abnormalities from Standard Conditions................................................................................................9 5Equipment List..........................................................................................................................................10 6Radio Spectrum Matter Test Results......................................................................................................12 6.1Out-of-band rejection..................................................................................................................................12 6.1.1E.U.T. Operation........................................................................................................................................12 6.1.2Test Setup...................................................................................................................................................12 6.1.3Measurement Record................................................................................................................................12 6.2Input versus output comparison..............................................................................................................13 6.2.1E.U.T. Operation........................................................................................................................................13 6.2.2Test Setup..............................................................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-05 Rev 1.1 Page: 1 of 35 FCC ID: 2BEYB-TP-WE-WRB2I Appendix - Test Data and Result for report GZCR231000104603 (For 817-824MHz/862-869MHz) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-05 Rev 1.1 Page: 2 of 35 1 Out-of-band rejection Out-of-band rejection DL UL The peak of the frequency response f0 is 868.7MHz. The peak of the frequency response f0 is 819.6MHz. The frequency point f0 with the highest power level fall in the CMRS band, EUT is compiled the KDB 935210 D05 Signal Booster Measurements v01r04 Out-of-band rejection verification test requirement. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-05 Rev 1.1 Page: 3 of 35 2 Input versus Output comparison Occupied Bandwidth Test Path Test Signal Test Channel Signal Level Verdict DL 4.1MHz AWGN MCH Pre-AGC PASS 3dB above AGC PASS GSM MCH Pre-AGC PASS 3dB above AGC PASS UL 4.1MHz AWGN MCH Pre-AGC PASS 3dB above AGC PASS GSM MCH Pre-AGC PASS 3dB above AGC PASS Remark: Compare the spectral plot of the input signal to the output signal affirm that they are similar (in passband and roll off characteristic features and relative spectral locations). The test result complies with the requirement. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-05 Rev 1.1 Page: 4 of 35 99% OBW DL_4.1MHz AWGN_MCH_Input_Pre-AGC DL_4.1MHz AWGN_MCH_Input_3dB above AGC SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-05 Rev 1.1 Page: 5 of 35 99% OBW DL_4.1MHz AWGN_MCH_Output_Pre-AGC DL_4.1MHz AWGN_MCH_Output_3dB above AGC SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-05 Rev 1.1 Page: 6 of 35 99% OBW DL_GSM_MCH_Input_Pre-AGC DL_GSM_MCH_Input_3dB above AGC SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-05 Rev 1.1 Page: 7 of 35 99% OBW DL_GSM_MCH_Output_Pre-AGC DL_GSM_MCH_Output_3dB above AGC SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-05 Rev 1.1 Page: 8 of 35 99% OBW UL_4.1MHz AWGN_MCH_Input_Pre-AGC U…

Text truncated - open the document above for the full version.