2BF3V-X1VIDEO PROJECTOR

1 User Manual LED Projector Thanks for purchasing our projectors. Please read the manual carefully before using the projector, keep the manual for further reference. 2 SAFETY INFORMATION 1.Read Instructions-All the safety and operating instructions should be read before the appliance is operated. 2.Read Instructions–The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliances and in the operating instructions should be adhered to. 4. Water and Moisture-Do not use the apparatus near water (e.g. Bath tub ,sink ,swimming pool) or in wet places or tropical climates.DO not place objects filled with liquids, such as vases, on top of the apparatus. Do not expose the apparatus to dripping or splashing. 5.Setup-The apparatus should only be placed on a stable, last surface. Do not let the apparatus fall down or expose it to shock. 6. Wall or Ceiling Mounting-The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 7. Ventilation-The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example. The appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings ; or, placedin a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation. Ensure that the ventilation is not impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains, atc. 8. Heat-The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances(including amplifiers)that produce heat. 9. Power Sources-The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 10. Cables and Plugs-The mains plug shall remain readily operable. All cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and thepoint where the exit from the appliance. 11. Cleaning-The appliance should be cleaned only as recommended by the manufacturer. Clean by wiping with a dry and clean cloth. Do not use chemical cleaners or detergents. Always pull the mains plug before cleaning the unit. 12. Non-use Periods-The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 13. Object and Liquid Entry-Care should be taken so that objects do not fall and liquids are not silled into the enclosure through openings. 14. Damage Requiring Service-The appliance should be serviced by qualified service personnel when: a) The power-supply cord or the plug has been damaged: or b)Objects have fallen, or liquid has been spilled into the appliance; or c)The appliance has been exposed to rain; or d)The appliance does not appear to operate normally or exhibits a marked change in performance; or e)The appliance has been dropped, or the enclosure damaged. 15.Servicing-The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicingshould be referred to qualified service personnel. 16.Open Fire-Keep the apparatus away from open fires. Do not place naked flame sources, such as lighted candles on the apparatus. 17.Thunderstorms-During a thunderstorm the mains plug should be unplugged. 18.Safety Check-After servicing the technician should conduct a safety check in order to ensure that the apparatus is working properly and safely. 19.Volume Levels-To prevent possible hearings damage, do not listen at high volume levels for long periods. 20.Headphones-Excessive sound pressure from earphones and headphones can cause hearing loss. WARNING:To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. 3 The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance. Disposal of Used Electrical & Electronic Equipment The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic equipment waste. By ensuring the correct disposal of this product, you will help prevent potential hazards to the environment and to human health, which could otherwise be caused by unsuitable waste handling of this product. The recycling of materials will help conserve natural resources. For more detailed information about recycling of this product, please contact your local city ofice, your household waste disposal service or the shop where you purchased the product. NOTES ABOUT THIS INSTRUCTION MANUAL 1.This instruction manual is published by the manufacturer without any warranty. Corrections and changes of thisinstruction manual for the removal of typographic mistakes and editorial in accuracies as well as due to (technical) improvements (changes) of the devices can be done by the manufacturer at any time without announcement. Changes of this kind are considered in future versions of this user manual. All rights reserved. 2.All figures are only for illustration and do not always show the exact representation of the product. 3.This unit is not intended for use by persons (including children…

Text truncated - open the document above for the full version.

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: Aishang Interactive (Shenzhen) Technology Co., Ltd Address: 608, 708, 709, Building 36, Chentian Industrial Zone, Chentian Community, Xixiang Street, Bao'an District, Shenzhen Guangdong 518000, China Phone: +86-755-82591330 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-05-07 Name / Title: Jiequan Zhou / Manager Company: Aishang Interactive (Shenzhen) Technology Co., Ltd Address: 608, 708, 709, Building 36, Chentian Industrial Zone, Chentian Community, Xixiang Street, Bao'an District, Shenzhen Guangdong 518000, China Phone: +86-755-82591330 Fax: N/A E-Mail: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2BF3V-X1 X1, Q3, A1, A2, A3, A5, A6, A7, A8, A9, A10, B1, B2, B3, B5, B6, B7, B8, B9, B10, D1, D2, D3, D5, D6, D7, D8, D9, D10, E1, E2, E3, E5, E6, E7, E8, E9, E10, F1, F2, F3, F5, F6, F7, F8, F9, F10, G1, G2, G3, G5, G6, G7, G8, G9, G10, H1, H2, H3, H5, H6, H7, H8, H9, H10, J1, J2, J3, J5, J6, J7, J8, J9, J10, K1, K2, K3, K5, K6, K7, K8, K9, K10, M1, M2, M3, M5, M6, M7, M8, M9, M10, PI, P2, P3, P5, P6, P7, P8, P9, P10, Q1, Q2, Q5, Q6, Q7, Q8, Q9, Q10, S1, S2, S3, S5, S6, S7, S8, S9, S10, T1, T2, T3, T5, T6, T7, T8, T9, T10, U1, U2, U3, U5, U6, U7, U8, U9, U10, V1, V2, V3, VS, V6, V7, V8, V9, V10, W1, W2, W3, W5, W6, W7, W8, W9, W10, X2, X3, X5, X6, X7, X8, X9, X10, Y1, Y2, Y3, YS, Y6, Y7, Y8, Y9, Y10, Z1, Z2, Z3, Z5, Z6, Z7, Z8, Z9, Z10 We, applicant Company Name: Aishang Interactive (Shenzhen) Technology Co., Ltd Address: 608, 708, 709, Building 36, Chentian Industrial Zone, Chentian Community, Xixiang Street, Bao'an District, Shenzhen Guangdong 518000, China Phone: +86-755-82591330 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-05-07 Name / Title: Jiequan Zhou / Manager Company: Aishang Interactive (Shenzhen) Technology Co., Ltd Address: 608, 708, 709, Building 36, Chentian Industrial Zone, Chentian Community, Xixiang Street, Bao'an District, Shenzhen Guangdong 518000, China Phone: +86-755-82591330 Fax: N/A E-Mail: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2BF3V-X1 X1, Q3, A1, A2, A3, A5, A6, A7, A8, A9, A10, B1, B2, B3, B5, B6, B7, B8, B9, B10, D1, D2, D3, D5, D6, D7, D8, D9, D10, E1, E2, E3, E5, E6, E7, E8, E9, E10, F1, F2, F3, F5, F6, F7, F8, F9, F10, G1, G2, G3, G5, G6, G7, G8, G9, G10, H1, H2, H3, H5, H6, H7, H8, H9, H10, J1, J2, J3, J5, J6, J7, J8, J9, J10, K1, K2, K3, K5, K6, K7, K8, K9, K10, M1, M2, M3, M5, M6, M7, M8, M9, M10, PI, P2, P3, P5, P6, P7, P8, P9, P10, Q1, Q2, Q5, Q6, Q7, Q8, Q9, Q10, S1, S2, S3, S5, S6, S7, S8, S9, S10, T1, T2, T3, T5, T6, T7, T8, T9, T10, U1, U2, U3, U5, U6, U7, U8, U9, U10, V1, V2, V3, VS, V6, V7, V8, V9, V10, W1, W2, W3, W5, W6, W7, W8, W9, W10, X2, X3, X5, X6, X7, X8, X9, X10, Y1, Y2, Y3, YS, Y6, Y7, Y8, Y9, Y10, Z1, Z2, Z3, Z5, Z6, Z7, Z8, Z9, Z10 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics • the Part List • the Tune up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-05-07 Name / Title: Jiequan Zhou / Manager Company: Aishang Interactive (Shenzhen) Technology Co., Ltd Address: 608, 708, 709, Building 36, Chentian Industrial Zone, Chentian Community, Xixiang Street, Bao'an District, Shenzhen Guangdong 518000, China Phone: +86-755-82591330 Fax: N/A E-Mail: [email protected]

Page 1 of 1 Rev.2.0 Aishang Interactive (Shenzhen) Technology Co., Ltd WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2BF3V-X1 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels can’t be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note: 1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo- location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following: Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Jiequan Zhou / Manager Signature: Phone: +86-755-82591330 Email: [email protected] Date: 2024-05-07

Aishang Interactive (Shenzhen) Technology Co., Ltd 608, 708, 709, Building 36, Chentian Industrial Zone, Chentian Community, Xixiang Street, Bao'an District, Shenzhen Guangdong 518000, China Date: May 7, 2024 FCC ID: 2BF3V-X1 Model Number: X1, Q3, A1, A2, A3, A5, A6, A7, A8, A9, A10, B1, B2, B3, B5, B6, B7, B8, B9, B10, D1, D2, D3, D5, D6, D7, D8, D9, D10, E1, E2, E3, E5, E6, E7, E8, E9, E10, F1, F2, F3, F5, F6, F7, F8, F9, F10, G1, G2, G3, G5, G6, G7, G8, G9, G10, H1, H2, H3, H5, H6, H7, H8, H9, H10, J1, J2, J3, J5, J6, J7, J8, J9, J10, K1, K2, K3, K5, K6, K7, K8, K9, K10, M1, M2, M3, M5, M6, M7, M8, M9, M10, PI, P2, P3, P5, P6, P7, P8, P9, P10, Q1, Q2, Q5, Q6, Q7, Q8, Q9, Q10, S1, S2, S3, S5, S6, S7, S8, S9, S10, T1, T2, T3, T5, T6, T7, T8, T9, T10, U1, U2, U3, U5, U6, U7, U8, U9, U10, V1, V2, V3, VS, V6, V7, V8, V9, V10, W1, W2, W3, W5, W6, W7, W8, W9, W10, X2, X3, X5, X6, X7, X8, X9, X10, Y1, Y2, Y3, YS, Y6, Y7, Y8, Y9, Y10, Z1, Z2, Z3, Z5, Z6, Z7, Z8, Z9, Z10 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Aishang Interactive (Shenzhen) Technology Co., Ltd hereby declare that our product (VIDEO PROJECTOR) Model Number: X1, Q3, A1, A2, A3, A5, A6, A7, A8, A9, A10, B1, B2, B3, B5, B6, B7, B8, B9, B10, D1, D2, D3, D5, D6, D7, D8, D9, D10, E1, E2, E3, E5, E6, E7, E8, E9, E10, F1, F2, F3, F5, F6, F7, F8, F9, F10, G1, G2, G3, G5, G6, G7, G8, G9, G10, H1, H2, H3, H5, H6, H7, H8, H9, H10, J1, J2, J3, J5, J6, J7, J8, J9, J10, K1, K2, K3, K5, K6, K7, K8, K9, K10, M1, M2, M3, M5, M6, M7, M8, M9, M10, PI, P2, P3, P5, P6, P7, P8, P9, P10, Q1, Q2, Q5, Q6, Q7, Q8, Q9, Q10, S1, S2, S3, S5, S6, S7, S8, S9, S10, T1, T2, T3, T5, T6, T7, T8, T9, T10, U1, U2, U3, U5, U6, U7, U8, U9, U10, V1, V2, V3, VS, V6, V7, V8, V9, V10, W1, W2, W3, W5, W6, W7, W8, W9, W10, X2, X3, X5, X6, X7, X8, X9, X10, Y1, Y2, Y3, YS, Y6, Y7, Y8, Y9, Y10, Z1, Z2, Z3, Z5, Z6, Z7, Z8, Z9, Z10 board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Aishang Interactive (Shenzhen) Technology Co., Ltd 608, 708, 709, Building 36, Chentian Industrial Zone, Chentian Community, Xixiang Street, Bao'an District, Shenzhen Guangdong 518000, China Sincerely, (Signed) Name/Title: Jiequan Zhou / Manager Company: Aishang Interactive (Shenzhen) Technology Co., Ltd Address: 608, 708, 709, Building 36, Chentian Industrial Zone, Chentian Community, Xixiang Street, Bao'an District, Shenzhen Guangdong 518000, China Tel: +86-755-82591330 Fax: N/A E-Mail: [email protected]

Page1of4FCCID:2BF3V-X1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity ExternalPhotosoftheEUT Fig.1 Fig.2 Page2of4FCCID:2BF3V-X1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.3 Fig.4 Page3of4FCCID:2BF3V-X1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.5 Fig.6 Page4of4FCCID:2BF3V-X1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.7 Fig.8

Page1of1FCCID:2BF3V-X1 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity LABELANDLOCATION (Size:L4.0cmxW3.0cm) VIDEOPROJECTOR Model:X1 FCCID:2BF3V-X1 LabelLocation

Page 1 of 6 FCC ID: 2BF3V-X1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Maximum Permissible Exposure Report 1. Product Information EUT : VIDEO PROJECTOR Test Model : X1 Additional Model No. : Q3, A1, A2, A3, A5, A6, A7, A8, A9, A10, B1, B2, B3, B5, B6, B7, B8, B9, B10, D1, D2, D3, D5, D6, D7, D8, D9, D10, E1, E2, E3, E5, E6, E7, E8, E9, E10, F1, F2, F3, F5, F6, F7, F8, F9, F10, G1, G2, G3, G5, G6, G7, G8, G9, G10, H1, H2, H3, H5, H6, H7, H8, H9, H10, J1, J2, J3, J5, J6, J7, J8, J9, J10, K1, K2, K3, K5, K6, K7, K8, K9, K10, M1, M2, M3, M5, M6, M7, M8, M9, M10, PI, P2, P3, P5, P6, P7, P8, P9, P10, Q1, Q2, Q5, Q6, Q7, Q8, Q9, Q10, S1, S2, S3, S5, S6, S7, S8, S9, S10, T1, T2, T3, T5, T6, T7, T8, T9, T10, U1, U2, U3, U5, U6, U7, U8, U9, U10, V1, V2, V3, VS, V6, V7, V8, V9, V10, W1, W2, W3, W5, W6, W7, W8, W9, W10, X2, X3, X5, X6, X7, X8, X9, X10, Y1, Y2, Y3, YS, Y6, Y7, Y8, Y9, Y10, Z1, Z2, Z3, Z5, Z6, Z7, Z8, Z9, Z10 Model Declaration : PCB board, structure and internal of these model(s) are the same, So no additional models were tested Power Supply : Input: AC 100-240V, 50/60Hz, 1.5A Max Hardware Version : V1.0 Software Version : / Bluetooth Frequency Range : 2402MHz~2480MHz Channel Number : 79 channels for Bluetooth V4.2 (DSS) 40 channels for Bluetooth V4.2 (DTS) Channel Spacing : 1MHz for Bluetooth V4.2 (DSS) 2MHz for Bluetooth V4.2 (DTS) Modulation Type : GFSK, π/4-DQPSK, 8-DPSK for Bluetooth V4.2 (DSS) GFSK for Bluetooth V4.2 (DTS) Bluetooth Version : V4.2 Antenna Description : Internal Antenna, 1.73dBi (Max.) 2.4G WLAN Frequency Range : 2412MHz-2462MHz Channel Number : 11 Channels for 20MHz bandwidth (2412~2462MHz) 7 Channels for 40MHz bandwidth (2422~2452MHz) Channel Spacing : 5MHz Modulation Type : IEEE 802.11b: DSSS (CCK, DQPSK, DBPSK) IEEE 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK) IEEE 802.11n: OFDM (64QAM, 16QAM, QPSK, BPSK) Antenna Description : Internal Antenna, 1.73dBi (Max.) WIFI(5.2G Band) Frequency Range : 5150MHz~5250MHz Channel Number : 4 channels for 20MHz bandwidth(5180MHz~5240MHz) 2 channels for 40MHz bandwidth(5190MHz~5230MHz) Modulation Type : IEEE 802.11a: OFDM (64QAM, 16QAM, QPSK, BPSK) IEEE 802.11n: OFDM (64QAM, 16QAM, QPSK, BPSK) Antenna Description : Internal Antenna, 4.45dBi (Max.) WIFI(5.8G Band) Frequency Range : 5725MHz~5850MHz Channel Number : 5 channels for 20MHz bandwidth(5745MHz~5825MHz) 2 channels for 40MHz bandwidth(5755MHz~5795MHz) Modulation Type : IEEE 802.11a: OFDM (64QAM, 16QAM, QPSK, BPSK) IEEE 802.11n: OFDM (64QAM, 16QAM, QPSK, BPSK) Antenna Description : Internal Antenna, 4.45dBi (Max.) DFS Operation Mode : Master Client with Radar detection capability Client without radar detection capability Exposure category : General population/uncontrolled environment EUT Type : Production Unit Device Type : Mobile Device Page 2 of 6 FCC ID: 2BF3V-X1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 2. Evaluation Method Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. In accordance with KDB447498D01 for Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modelled or measured field strengths or power density, is ≤ 1.0. The MPE ratio of each antenna is determined at the minimum test separation distance required by the operating configurations and exposure conditions of the host device, according to the ratio of field strengths or power density to MPE limit, at the test frequency. Either the maximum peak or spatially averaged results from measurements or numerical simulations may be used to determine the MPE ratios. Spatial averaging does not apply when MPE is estimated using simple calculations based on far-field plane-wave equivalent conditions. The antenna installation and operating requirements for the host device must meet the minimum test separation distances required by all antennas, in both standalone and simultaneous transmission operations, to satisfy compliance. 3. Limit 3. 1 Refer Evaluation Method ANSI C95.1–2019: IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz FCC KDB publication 447498 D01 General 1 RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices. 3. 2 Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) …

Text truncated - open the document above for the full version.

Page1of39FCCID:2BF3V-X1ReportNo.:LCSA04154048EC ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCCTESTREPORT For AishangInteractive(Shenzhen)TechnologyCo.,Ltd VIDEOPROJECTOR TestModel:X1 AdditionalModelNo.:PleaseRefertoPage6 Preparedfor:AishangInteractive(Shenzhen)TechnologyCo.,Ltd Address:608,708,709,Building36,ChentianIndustrialZone,Chentian Community,XixiangStreetBao’anDistrict,Shenzhen,Guangdong China Preparedby:ShenzhenLCSComplianceTestingLaboratoryLtd. Address:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei, ShajingStreet,BaoanDistrict,Shenzhen,518000,China Tel:(+86)755-82591330 Fax:(+86)755-82591332 Web:www.LCS-cert.com Mail:[email protected] Dateofreceiptoftestsample:April15,2024 Numberoftestedsamples:2 Samplenumber:A240415126-1,A240415126-2 Serialnumber:Prototype DateofTest:April15,2024~May06,2024 DateofReport:May06,2024 Page2of39FCCID:2BF3V-X1ReportNo.:LCSA04154048EC ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCCTESTREPORT FCCCFR47PART15C(15.247) ReportReferenceNo......................:LCSA04154048EC DateofIssue.......................................:May06,2024 TestingLaboratoryName..............:ShenzhenLCSComplianceTestingLaboratoryLtd. Address................................................:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei, ShajingStreet,BaoanDistrict,Shenzhen,518000,China TestingLocation/Procedure............:FullapplicationofHarmonisedstandards■ PartialapplicationofHarmonisedstandards□ Otherstandardtestingmethod□ Applicant’sName.............................:AishangInteractive(Shenzhen)TechnologyCo.,Ltd Address................................................:608,708,709,Building36,ChentianIndustrialZone,Chentian Community,XixiangStreetBao’anDistrict,Shenzhen,Guangdong China TestSpecification Standard..............................................:FCCCFR47PART15C(15.247) TestReportFormNo......................:LCSEMC-1.0 TRFOriginator....................................:ShenzhenLCSComplianceTestingLaboratoryLtd. MasterTRF.........................................:Dated2011-03 ShenzhenLCSComplianceTestingLaboratoryLtd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenLCSComplianceTestingLaboratoryLtd.isacknowledgedascopyrightownerandsourceofthe material.ShenzhenLCSComplianceTestingLaboratoryLtd.takesnoresponsibilityforandwillnot assumeliabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialduetoits placementandcontext. EUTDescription...............................: VIDEOPROJECTOR TradeMark..........................................:N/A TestModel...........................................: X1 Ratings.................................................:Input:AC100-240V,50/60Hz,1.5AMax Result...................................................:Positive Compiledby:Supervisedby:Approvedby: JerryChu/AdministratorCaryLuo/TechniqueprincipalGavinLiang/Manager Page3of39FCCID:2BF3V-X1ReportNo.:LCSA04154048EC ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCC--TESTREPORT EUT.........................................:VIDEOPROJECTOR TestModel...............................:X1 Applicant...............................:AishangInteractive(Shenzhen)TechnologyCo.,Ltd Address..................................:608,708,709,Building36,ChentianIndustrialZone,Chentian Community,XixiangStreetBao’anDistrict,Shenzhen,Guangdong China Telephone...............................:/ Fax..........................................:/ Manufacturer........................:AishangInteractive(Shenzhen)TechnologyCo.,Ltd Address...................................:608,708,709,Building36,ChentianIndustrialZone,Chentian Community,XixiangStreetBao’anDistrict,Shenzhen,Guangdong China Telephone...............................:/ Fax..........................................:/ Factory...................................:AishangInteractive(Shenzhen)TechnologyCo.,Ltd Address...................................:608,708,709,Building36,ChentianIndustrialZone,Chentian Community,XixiangStreetBao’anDistrict,Shenzhen,Guangdong China Telephone...............................:/ Fax..........................................:/ TestResultPositive Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetestlaboratory. TestReportNo.:LCSA04154048EC May06,2024 Dateofissue Page4of39FCCID:2BF3V-X1ReportNo.:LCSA04154048EC ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity RevisionHistory ReportVersionIssueDateRevisionContentRevisedBy 000May06,2024InitialIssue--- Page5of39FCCID:2BF3V-X1ReportNo.:LCSA04154048EC ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity TABLEOFCONTENTS 1.GENERALINFORMATION.....................................................................................................................................6 1.1.DESCRIPTIONOFDEVICE(EUT) ..............................................................................................................…

Text truncated - open the document above for the full version.

Page1of35FCCID:2BF3V-X1ReportNo.:LCSA04154048EB ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity FCCTESTREPORT For AishangInteractive(Shenzhen)TechnologyCo.,Ltd VIDEOPROJECTOR TestModel:X1 AdditionalModelNo.:PleaseRefertoPage6 Preparedfor:AishangInteractive(Shenzhen)TechnologyCo.,Ltd Address:608,708,709,Building36,ChentianIndustrialZone,Chentian Community,XixiangStreetBao’anDistrict,Shenzhen,Guangdong China Preparedby:ShenzhenLCSComplianceTestingLaboratoryLtd. Address:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei, ShajingStreet,BaoanDistrict,Shenzhen,518000,China Tel:(+86)755-82591330…

Text truncated - open the document above for the full version.