2BF5J-CL16-49vibrator

FCC ID LABEL: Ca. 5mm x 10mm Label Location FCC ID: 2BF5J-CL16-49

FCC RF Exposure EUT Description: vibrator Model No.: CL16-49 FCC ID: 2BF5J-CL16-49 1. Limits According to KDB 447498 D01 General RF Exposure Guidance v06 The 1‐g and 10‐g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max power of channel, including tune‐up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHz)]≤3.0 for 1‐g SAR and ≤ 7.5 for 10‐g extremity SAR, Where: Result=P/D*√F F= the RF channel transmit frequency in GHz P=Maximum turn‐up power in mw D=Min. test separation distance in mm 2. Test Result of RF Exposure Evaluation Frequency (MHz) Output power (dBm) Tune Up Power (dBm) Max Tune Up power (mW) Min test separation distance (mm) Result Limit SAR Test Exclusion BLE 2480 1.67 1±1(2) 1.585 5 0.499 3.0 Pass Note: PK Output power= conducted power. Conducted power see the test report HK2512046410-E, antenna gain = 0dBi Per KDB 447498 D01, when the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. The test exclusion threshold is 0.499 which is<= 3, SAR testing is not required. Note: Exclusion Thresholds Results=[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] f(GHz) is the RF channel transmit frequency in GHz Distance=5mm

Page 1 of 42 Report No.: HK2512046410-E FCC Test Report Test Report On Behalf of Shenzhen Chenglong Technology Co., LTD. For vibrator Model No.: CL16-49, CL16-18 FCC ID: 2BF5J-CL16-49 Prepared For: Shenzhen Chenglong Technology Co., LTD. Room201, Building 1, No.18, Yigongliu Roand, Loucun Community Building, Xinhu Street, Guangming Distrct, Shenzhen, China Prepared By: Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Dec. 04, 2025 ~ Dec. 18, 2025 Date of Report: Dec. 18, 2025 Report Number: HK2512046410-E Page 2 of 42 Report No.: HK2512046410-E Test Result Certification Applicant’s Name ................... : Shenzhen Chenglong Technology Co., LTD. Address .................................... : Room201, Building 1, No.18, Yigongliu Roand, Loucun Community Building, Xinhu Street, Guangming Distrct, Shenzhen, China Manufacturer's Name ............. : Shenzhen Chenglong Technology Co., LTD. Address .................................... : Room201, Building 1, No.18, Yigongliu Roand, Loucun Community Building, Xinhu Street, Guangming Distrct, Shenzhen, China Product Description Trade Mark ................................. : MELOVES Product Name ............................ : vibrator Model and/or Type Reference .. : CL16-49, CL16-18 Standards ................................ : 47 CFR FCC Part 15 Subpart C 15.247 KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10: 2020 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test .............................................. : Date (s) of Performance of Tests ............... : Dec. 04, 2025 ~ Dec. 18, 2025 Date of Issue ............................................. : Dec. 18, 2025 Test Result ................................................. : Pass Testing Engineer Len Liao Technical Manager Sliver Wan Authorized Signatory Jason Zhou Page 3 of 42 Report No.: HK2512046410-E Contents Page 1 Summary ......................................................................................................................................................... 5 1.1 Test Procedures and Results .................................................................................................................... 5 1.2 Measurement Uncertainty ......................................................................................................................... 6 1.3 Information of the Test Laboratory ............................................................................................................ 6 2 General Information ....................................................................................................................................... 7 2.1 General Description of EUT ...................................................................................................................... 7 2.2 Description of Test Conditions .................................................................................................................. 9 2.3 Description of Test Setup ........................................................................................................................ 10 2.4 Description of Support Units .................................................................................................................... 11 3 Equipments List for All Test Items ............................................................................................................. 12 4 Test Result .................................................................................................................................................... 13 4.1 Antenna Requirement.............................................................................................................................. 13 4.2 AC Conduction Emissions Measurement ................................................................................................ 14 4.3 Radiated Emissions Measurement .......................................................................................................... 18 4.4 Maximum Peak Output Power Measurement ......................................................................................... 26 4.5 Power Spectral Density ........................................................................................................................... 27 4.6 6dB Bandwidth ........................................................................................................................................ 30 4.7 Occupied Bandwidth ................................................................................................................................ 33 4.8 Band Edge ............................................................................................................................................... 34 4.9 Conducted Spurious Emissions .............................................................................................................. 36 5 Test Setup Photos of the EUT .................................................................................................................... 40 6 Photos of the EUT ........................................................................................................................................ 42 Page 4 of 42 Report No.: HK2512046410-E ** Issued History ** Revision Description Issued Date Remark Revision 1.0 Initial Test Report Release Dec. 18, 2025 Jason Zhou Page 5 of 42 Report No.: HK2512046410-E 1 Summary 1.1 Test Procedures and Results Note: 1. P…

Text truncated - open the document above for the full version.

Test Model: CL16-49 Radiated Emission AC Conducted Emission RF Conducted Emission