2BF5R-VHHB1Hub

QUICK SETUP GUIDE Alarm Home Security Kit In the Box Hub: VHHB1Keypad: VHKP1 Contact & Motion Sensor: VHMS1 Glass Break Sensor: VHSD1 Installation Kit Power Adapter × 2 Charging Cable× 2 Ethernet Cable AAA Batteries × 8 At a glance Speaker Speaker Indicator Light Sync Button Sync Button Sync Button MIC Sync Button Ethernet Port NFC Area Network Indicator Light Battery Indicator Light Indicator Light Indicator Light Motion Sensor USB Type-c Port USB Type-c Port Download VicoHome APP Search “VicoHome” in your phone’s app store or scan the QR code. To reduce the risk of scams or malware, use your phone’s built-in camera app to scan the QR code instead of third-party apps. Setup the devices Add the Hub Hub is the brain of the alarm security system, connecting sensors to the app and having a built-in siren to ward off would-be intruders. First, power on the Hub using the included USB cable and power adapter. Connect the Hub to your home internet via Wi-Fi or Ethernet and make sure it's placed in a central lcoation for best coverage of sensors. Tap “Add Device” in the app, select the corresponding product type, and follow the on-screen instructions. Add the Keypad The keypad allows you to easily control the system’s security modes and trigger fast emergency alerts using the dedicated buttons. Install four AAA batteries in the keypad, or power it using an adapter and USB cable. The device will turn on automatically. During the initial setup of your system, the Hub is prepared to automatically recognize and pair with the keypad. After the Hub has been successfully paired in the App, simply power on the keypad—it will be automatically discovered and paired with the Hub. Follow the in-App instructions to power on the keypad or activate pairing mode to complete the automatic pairing process. Add the Contact & Motion Sensor The Contact & Motion Sensor is a 2-in-1 device that monitors both door/window openings and motion activity. Twist open the battery cover on the back of each Contact & Motion Sensor using a coin, remove the insulation tab, then reattach and tighten the cover. During the initial setup of your system, the Hub is prepared to automatically recognize and pair with the Contact & Motion Sensor. After the Hub has been successfully paired in the App, simply power on the sensor—it will be automatically discovered and paired with the Hub. Follow the in-App instructions to power on the sensor or activate pairing mode to complete the automatic pairing process. The Glass Break Sensor detects the sound of breaking glass and triggers an alarm if someone attempts to enter by smashing a window. Install four AAA batteries in the Glass Break Sensor. During the initial setup of your system, the Hub is prepared to automatically recognize and pair with the Glass Break Sensor. After the Hub has been successfully paired in the App, simply power on the sensor—it will be automatically discovered and paired with the Hub. Follow the in-App instructions to power on the sensor or activate pairing mode to complete the automatic pairing process. Add the Glass Break Sensor Installation Make sure to follow the in-app guide to ensure your devices are added to the VicoHome app. Hub Keypad Placed the hub in a central location for best coverage of sensors and keypads. Placed near your door, the keypad makes it easy to quickly arm and disarm your system. Desktop Placement：The Hub can be placed on a flat surface. Screw installation: drill holes on the wall according to the positions marked by the alignment sticker, using a 6mm (15/64-inch, M6) drill bit. Insert the wall plugs from the accessory kit into the holes. Then, screw the provided screws into the wall plugs, and hang the Hub onto them. Adhesive installation: Ensure the wall surface is clean and dry before applying the adhesive pad. Peel the 3M adhesive pad behind the keypad and sensors to the desired installation position. Then, press firmly for 30 seconds to secure it. Screw installation: drill holes on the wall, using a 6mm (15/64-inch, M6) drill bit. Insert the wall plugs from the accessory kit into the holes. Then, align the base of the sensors and secure it to the wall with the provided screws. 3M =6mm (15/64-inch, M6) =6mm (15/64-inch, M6) Contact & Motion Sensor Always know when your doors are open or left open, and detect people at the same time. Mount on entry/exits and windows, or any area where you want to monitor human movement. Installation Location: Line the sensor and the magnet up with no more than 1'' between them. If installing it on a door, choose a side without hinges. If only use it for motion detection, better install 7' above the floor, and choose a location with no obstacles or blind spots. Adhesive installation: Ensure the wall surface is clean and dry before applying the adhesive pad. Peel the 3M adhesive pad behind the keypad and sensors to the desired installation position. Then, press firmly for 30 seconds to secure it. Screw installation: drill holes on the wall, using a 6mm (15/64-inch, M6) drill bit. Insert the wall plugs from the accessory kit into the holes. Then, align the base of the sensors and secure it to the wall with the provided screws. =6mm (15/64-inch, M6) 1'' max 3M Glass Break Sensor Place it on a wall close to the window at least 7'(2m) off the groud, so it can effectively detect the sound of breaking glass during an intrusion. Adhesive installation: Ensure the wall surface is clean and dry before applying the adhesive pad. Peel the 3M adhesive pad behind the keypad and sensors to the desired installation position. Then, press firmly for 30 seconds to secure it. Screw installation: drill holes on the wall, using a 6mm (15/64-inch, M6) drill bit. Insert the wall plugs from the accessory kit into the holes. Then, align the base of the sensors and secure it to the wall with the provided screws. 3M Unless specifically indicated that it is safe to do so in the user quide or instruction manua do not use this device in an e…

Text truncated - open the document above for the full version.

Confirmation of Sample 样品承认书 1st The Main Antenna Sample Confirmation Manufacturer：SINAWELL Electronics(Shenzhen) Co., Ltd. Add：712-717, Block A Jinfulai Building,49-1 Dabao Road,Xinan 28 th area,Baoan District,Shenzhen,China Customer Project Name CS1-HB1-A Date 2025-11-03 Project NO. SN1492-01 Notes coaxial line+ FPC Frequency Range 2400MHz-2500MHz Designed By RF Engineer Structural Engineer Checked By Engineering Manager Client’s Approval Confirmation of Sample 样品承认书 2nd Table of Contents 1. Specification description ......................................................................................................................... 3rd 2. Antenna appearance ................................................................................................................................ 3rd 3. Electrical performance ............................................................................................................................ 3rd 3.1. Antenna band ........................................................................................................................................................ 3rd 3.2. Matching Circuit ................................................................................................................................................... 4th 3.3. Return Loss ........................................................................................................................................................... 4th 4. Thread antenna passive test data ........................................................................................................... 6th 5. Field intensity pattern ............................................................................................................................. 7th Confirmation of Sample 样品承认书 3rd 1.Specification description This specification describes the status of the CS-HB1-A internal antenna with a frequency band of 2400MHz-2500MHz. 2.Antenna appearance 3.Electrical performance 3.1. Antenna band Thread Transmitting band(MHz) 2400MHz-2500MHz Confirmation of Sample 样品承认书 4th 3.2. Matching Circuit After the test point is at the antenna connector (RF test port), see the figure below. 1. WIFIantenna matching。 3.3. Return Loss Element Value E1(0201) NC E2(0201) 0Ω E3(0201) NC E4 0Ω Confirmation of Sample 样品承认书 5th Appendix 1: Structural Drawing Confirmation of Sample 样品承认书 6th 4. Thread antenna passive test data Freq Gain Effi Effi (MHz) (dBi) (dB) (%) 2400 3.32 -1.29 74.3 2410 3.26 -1.22 75.5 2420 2.94 -1.4 72.44 2430 2.81 -1.42 72.15 2440 2.64 -1.37 72.93 2450 2.53 -1.31 74.04 2460 2.33 -1.39 72.67 2470 2.2 -1.47 71.35 2480 2.07 -1.61 69.07 2490 2.04 -1.72 67.32 2500 1.9 -1.85 65.24 Confirmation of Sample 样品承认书 7th 5. Field intensity pattern 3D Confirmation of Sample 样品承认书 8th 2D

FCC ID: 2BF5R-VHHB1 TB-RF-074-1.0 Appendix V EUT Test Photographs Photo of Setup for Conducted Emission Photo of Setup for Radiated Emission (Below 1 GHz) FCC ID: 2BF5R-VHHB1 TB-RF-074-1.0 Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for RF Conducted----BT&WIFI FCC ID: 2BF5R-VHHB1 TB-RF-074-1.0 Photo of Setup for RF Conducted----Thread -----END OF THE REPORT-----

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202511-0121-52 Page: 1 of 35 TB-RF-074-1.0 1/F., Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Test Report FCC ID: 2BF5R-VHHB1 Report No. : TBR-C-202511-0121-52 Applicant : Photon Sail Technologies Pte. Ltd. Equipment Under Test (EUT) EUT Name : Hub Model No. : VHHB1 Series Model No. : ---- Brand Name : Sample ID : HC-C-202511-0121-01-01-1#&HC-C-202511-0121-01-01-2# Receipt Date : 2025-11-21 Test Date : 2025-11-21 to 2025-12-31 Issue Date : 2025-12-31 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10:2020+Cor.1:2023 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Tested By : Lily. zhang Reviewed By : Wade. Lv Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202511-0121-52 Page: 2 of 35 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 7 1.4 Description of Support Units .............................................................................................. 7 1.5 Description of Test Mode .................................................................................................... 8 1.6 Description of Test Software Setting ................................................................................ 8 1.7 Measurement Uncertainty .................................................................................................. 9 1.8 Test Facility ......................................................................................................................... 10 2. TEST SUMMARY ..................................................................................................................... 11 3. TEST SOFTWARE ................................................................................................................... 11 4. TEST EQUIPMENT AND TEST SITE ................................................................................... 12 5. CONDUCTED EMISSION ....................................................................................................... 14 5.1 Test Standard and Limit .................................................................................................... 14 5.2 Test Setup ........................................................................................................................... 14 5.3 Test Procedure ................................................................................................................... 14 5.4 Deviation From Test Standard ......................................................................................... 15 5.5 EUT Operating Mode ........................................................................................................ 15 5.6 Test Data ............................................................................................................................. 15 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 16 6.1 Test Standard and Limit .................................................................................................... 16 6.2 Test Setup ........................................................................................................................... 18 6.3 Test Procedure ................................................................................................................... 19 6.4 Deviation From Test Standard ......................................................................................... 20 6.5 EUT Operating Mode ........................................................................................................ 20 6.6 Test Data ............................................................................................................................. 20 7. RESTRICTED BANDS AND BAND EDGE REQUIREMENT .......................................... 21 7.1 Test Standard and Limit .................................................................................................... 21 7.2 Test Setup ........................................................................................................................... 21 7.3 Test Procedure ................................................................................................................... 22 7.4 Deviation From Test Standard ......................................................................................... 23 Report No.: TBR-C-202511-0121-52 Page: 3 of 35 TB-RF-074-1.0 7.5 EUT Operating Mode ........................................................................................................ 23 7.6 Test Data ............................................................................................................................. 23 8. BANDWIDTH TEST ................................................................................................................. 24 8.1 Test Standard and Limit ...............................................................................…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202511-0121-51 Page: 1 of 36 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Test Report FCC ID: 2BF5R-VHHB1 Report No. : TBR-C-202511-0121-51 Applicant : Photon Sail Technologies Pte. Ltd. Equipment Under Test (EUT) EUT Name : Hub Model No. : VHHB1 Series Model No. : ---- Brand Name : Sample ID : HC-C-202511-0121-01-01-1#&HC-C-202511-0121-01-01-2# Receipt Date : 2025-11-21 Test Date : 2025-11-21 to 2025-12-31 Issue Date : 2025-12-31 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10:2020+Cor.1:2023 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Tested By : Lily. zhang Reviewed By : Wade. Lv Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202511-0121-51 Page: 2 of 36 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 7 1.4 Description of Support Units .............................................................................................. 7 1.5 Description of Test Mode .................................................................................................... 8 1.6 Description of Test Software Setting ................................................................................ 9 1.7 Measurement Uncertainty ................................................................................................ 10 1.8 Test Facility ......................................................................................................................... 11 2. TEST SUMMARY ..................................................................................................................... 12 3. TEST SOFTWARE ................................................................................................................... 12 4. TEST EQUIPMENT AND TEST SITE ................................................................................... 13 5. CONDUCTED EMISSION TEST ........................................................................................... 15 5.1 Test Standard and Limit .................................................................................................... 15 5.2 Test Setup ........................................................................................................................... 15 5.3 Test Procedure ................................................................................................................... 15 5.4 Deviation From Test Standard ......................................................................................... 16 5.5 EUT Operating Mode ........................................................................................................ 16 5.6 Test Data ............................................................................................................................. 16 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 17 6.1 Test Standard and Limit .................................................................................................... 17 6.2 Test Setup ........................................................................................................................... 19 6.3 Test Procedure ................................................................................................................... 20 6.4 Deviation From Test Standard ......................................................................................... 21 6.5 EUT Operating Mode ........................................................................................................ 21 6.6 Test Data ............................................................................................................................. 21 7. RESTRICTED BANDS AND BAND EDGE REQUIREMENT .......................................... 22 7.1 Test Standard and Limit .................................................................................................... 22 7.2 Test Setup ........................................................................................................................... 22 7.3 Test Procedure ................................................................................................................... 23 Report No.: TBR-C-202511-0121-51 Page: 3 of 36 TB-RF-074-1.0 7.4 Deviation From Test Standard ......................................................................................... 24 7.5 EUT Operating Mode ........................................................................................................ 24 7.6 Test Data ............................................................................................................................. 24 8. BANDWIDTH TEST ................................................................................................................. 25 8.1 Test Standard and Limit ........................................................................................…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202511-0121-51 Page: 18 of 25 FCC ID: 2BF5R-VHHB1 TB-RF-074-1.0 11G-Ant1-2437-0~Reference-PASS 11G-Ant1-2437-30~1000-PASS 11G-Ant1-2437-1000~26500-PASS 11G-Ant1-2462-0~Reference-PASS 11G-Ant1-2462-30~1000-PASS 11G-Ant1-2462-1000~26500-PASS Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202511-0121-51 Page: 19 of 25 FCC ID: 2BF5R-VHHB1 TB-RF-074-1.0 11N20SISO-Ant1-2412-0~Reference-PASS 11N20SISO-Ant1-2412-30~1000-PASS 11N20SISO-Ant1-2412-1000~26500-PASS 11N20SISO-Ant1-2437-0~Reference-PASS 11N20SISO-Ant1-2437-30~1000-PASS 11N20SISO-Ant1-2437-1000~26500-PASS Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202511-0121-51 Page: 20 of 25 FCC ID: 2BF5R-VHHB1 TB-RF-074-1.0 11N20SISO-Ant1-2462-0~Reference-PASS 11N20SISO-Ant1-2462-30~1000-PASS 11N20SISO-Ant1-2462-1000~26500-PASS Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202511-0121-51 Page: 21 of 25 FCC ID: 2BF5R-VHHB1 TB-RF-074-1.0 7: Duty Cycle 7.1 Test Result TestMode Antenna Frequency [MHz] Transmission Duration [ms] Transmission Period [ms] Duty Cycle [%] DC Factor 1/T [kHz] 11B Ant1 2412 0.59 1.19 49.58 3.05 1.69 11G Ant1 2412 0.20 0.40 50.00 3.01 5.00 11N20SISO Ant1 2412 0.20 0.39 51.28 2.90 5.00 Note: 1, Duty Cycle= Transmission Duration/ Transmission Period 2, DC Factor=10*Log 10 (1/Duty Cycle) 3, 1/T=1/ Transmission Duration Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202511-0121-51 Page: 22 of 25 FCC ID: 2BF5R-VHHB1 TB-RF-074-1.0 7.2 Test Graphs NTNV-11B-Ant1-2412 NTNV-11G-Ant1-2412 NTNV-11N20SISO-Ant1-2412 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202511-0121-51 Page: 23 of 25 FCC ID: 2BF5R-VHHB1 TB-RF-074-1.0 8: Emissions in Restricted Bands 8.1 Test Result TestMode Ant. ChName Freq. [MHz] Detector Freq [MHz] Result [dBm] Limit [dBm] Result [dBuV/m] Limit [dBuV/m] Verdict 11B Ant1 Low 2412 Peak 2390.000 -37.85 ≤-21.20 57.35 ≤74 PASS 11B Ant1 Low 2412 Peak 2310.000 -38.05 ≤-21.20 57.15 ≤74 PASS 11B Ant1 Low 2412 Peak 2345.500 -34.21 ≤-21.20 60.99 ≤74 PASS 11B Ant1 Low 2412 AV 2390.000 -53.53 ≤-41.20 41.67 ≤54 PASS 11B Ant1 Low 2412 AV 2310.000 -54.95 ≤-41.20 40.25 ≤54 PASS 11B Ant1 Low 2412 AV 2385.800 -51.23 ≤-41.20 43.97 ≤54 PASS 11B Ant1 High 2462 Peak 2483.500 -36.59 ≤-21.20 58.61 ≤74 PASS 11B Ant1 High 2462 Peak 2500.000 -37.99 ≤-21.20 57.21 ≤74 PASS 11B Ant1 High 2462 Peak 2489.500 -34.42 ≤-21.20 60.78 ≤74 PASS 11B Ant1 High 2462 AV 2483.500 -53.59 ≤-41.20 41.61 ≤54 PASS 11B Ant1 High 2462 AV 2500.000 -51.83 ≤-41.20 43.37 ≤54 PASS 11B Ant1 High 2462 AV 2488.840 -49.68 ≤-41.20 45.52 ≤54 PASS 11G Ant1 Low 2412 Peak 2390.000 -30.91 ≤-21.20 64.29 ≤74 PASS 11G Ant1 Low 2412 Peak 2310.000 -37.84 ≤-21.20 57.36 ≤74 PASS 11G Ant1 Low 2412 Peak 2389.830 -29.4 ≤-21.20 65.80 ≤74 PASS 11G Ant1 Low 2412 AV 2390.000 -44.09 ≤-41.20 51.11 ≤54 PASS 11G Ant1 Low 2412 AV 2310.000 -54.8 ≤-41.20 40.40 ≤54 PASS 11G Ant1 Low 2412 AV 2389.960 -44.09 ≤-41.20 51.11 ≤54 PASS 11G Ant1 High 2462 Peak 2483.500 -26.61 ≤-21.20 68.59 ≤74 PASS 11G Ant1 High 2462 Peak 2500.000 -37.22 ≤-21.20 57.98 ≤74 PASS 11G Ant1 High 2462 Peak 2484.440 -23.53 ≤-21.20 71.67 ≤74 PASS 11G Ant1 High 2462 AV 2483.500 -41.24 ≤-41.20 53.96 ≤54 PASS 11G Ant1 High 2462 AV 2500.000 -52.95 ≤-41.20 42.25 ≤54 PASS 11G Ant1 High 2462 AV 2483.670 -42.07 ≤-41.20 53.13 ≤54 PASS 11N20SISO Ant1 Low 2412 Peak 2390.000 -33.56 ≤-21.20 61.64 ≤74 PASS 11N20SISO Ant1 Low 2412 Peak 2310.000 -37.02 ≤-21.20 58.18 ≤74 PASS 11N20SISO Ant1 Low 2412 Peak 2388.790 -32.55 ≤-21.20 62.65 ≤74 PASS 11N20SISO Ant1 Low 2412 AV 2390.000 -48.33 ≤-41.20 46.87 ≤54 PASS 11N20SISO Ant1 Low 2412 AV 2310.000 -55.42 ≤-41.20 39.78 ≤54 PASS 11N20SISO Ant1 Low 2412 AV 2389.830 -46.69 ≤-41.20 48.51 ≤54 PASS 11N20SISO Ant1 High 2462 Peak 2483.500 -28.59 ≤-21.20 66.61 ≤74 PASS 11N20SISO Ant1 High 2462 Peak 2500.000 -38.05 ≤-21.20 57.15 ≤74 PASS 11N20SISO Ant1 High 2462 Peak 2484.110 -26.14 ≤-21.20 69.06 ≤74 PASS 11N20SISO Ant1 High 2462 AV 2483.500 -43.36 ≤-41.20 51.84 ≤54 PASS 11N20SISO Ant1 High 2462 AV 2500.000 -52.61 ≤-41.20 42.59 ≤54 PASS 11N20SISO Ant1 High 2462 AV 2483.560 -43.2 ≤-41.20 52.00 ≤54 PASS Note： 1. The Antenna Gain is compensated in the graph. 2. The limit in dBm for average detector is conversion from 54dBuV/m, according to 15.209(a), The limit in dBm for peak detector is 20dB above the limit of average detector in dBm. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202511-0121-51 Page: 24 of 25 FCC ID: 2BF5R-VHHB1 TB-RF-074-1.0 8.2 Test Graphs 11B-Ant1-2412-PASS 11B-Ant1-2412-PASS 11B-Ant1-2462-PASS 11B-Ant1-2462-PASS 11G-Ant1-2412-PASS 11G-Ant1-2412-PASS Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202511-0121-51 Page: 25 of 25 FCC ID: 2BF5R-VHHB1 TB-RF-074-1.0 11G-Ant1-2462-PASS 11G-Ant1-2462-PASS 11N20SISO-Ant1-2412-PASS 11N20SISO-Ant1-2412-PASS 11N20SISO-Ant1-2462-PASS 11N20SISO-Ant1-2462-PASS -----END OF THE REPORT-----

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202511-0121-5 Page: 1 of 35 TB-RF-074-1.0 1/F., Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Test Report FCC ID: 2BF5R-VHHB1 Report No. : TBR-C-202511-0121-5 Applicant : Photon Sail Technologies Pte. Ltd. Equipment Under Test (EUT) EUT Name : Hub Model No. : VHHB1 Series Model No. : ---- Brand Name : Sample ID : HC-C-202511-0121-01-01-1#&HC-C-202511-0121-01-01-2# Receipt Date : 2025-11-21 Test Date : 2025-11-21 to 2025-12-31 Issue Date : 2025-12-31 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10:2020+Cor.1:2023 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Tested By : Lily. zhang Reviewed By : Wade. Lv Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202511-0121-5 Page: 2 of 35 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 7 1.4 Description of Support Units .............................................................................................. 7 1.5 Description of Test Mode .................................................................................................... 8 1.6 Description of Test Software Setting ................................................................................ 8 1.7 Measurement Uncertainty .................................................................................................. 9 1.8 Test Facility ......................................................................................................................... 10 2. TEST SUMMARY ..................................................................................................................... 11 3. TEST SOFTWARE ..............................................................................................…

Text truncated - open the document above for the full version.