2BF62-WY101MP Wifi IPCamera

&OLFNDSRVLWLRQRQWKHJXQ VFUHHQ7KHEDOOPDFKLQH VFUHHQZLOOWXUQWRWKHJXQ PDFKLQHVFUHHQ3RVLWLRQWR YLHZGHWDLOV /LQNDJHFRUUHFWLRQ &DPHUDOLQNDJH :KHQ\RXFOLFNDSRVLWLRQRQWKHJXQVFUHHQWKHEDOOVFUHHQ ZLOOWXUQWRWKHJXQVFUHHQ:KHQWKHUHLVDQHUURULQWKH FRUUHVSRQGLQJSRVLWLRQRIWKHVFUHHQ8VLQJWKHFDPHUD OLQNDJHIXQFWLRQ&RUUHFWLRQSRVLWLRQ /LQNDJHFRUUHFWLRQ )XQFWLRQVHWWLQJV&DPHUDOLQNDJH ̵)LQGWKHGHYLFH%OXHWRRWK DQGFOLFN&RQQHFW ̵&OLFN$GGWKHSDJH MXPSVWRƉJXUH ̵)LQGWKHGHYLFH %OXHWRRWKDQGFOLFN &RQQHFW &RQQHFWLRQPHWKRG%OXHWRRWK ̵8SRQKHDULQJDVRXQG RUVHHLQJWKHLQGLFDWRU OLJKWƊDVKLQJFKHFNDQG FOLFN1H[W ̵6HOHFW:L)LHQWHUWKH FRUUHFWSDVVZRUGDQG FOLFN1H[W ̵&OLFNWRDGGGHYLFH ̵6FDQWKH45FRGHRQ WKHFDPHUDODEHO &RQQHFWLRQPHWKRG6FDQWKH 45FRGH ̵6HOHFW:L)LHQWHUWKH FRUUHFWSDVVZRUGDQG FOLFN1H[W ̵:DLWLQJIRUFRQQHFWLRQ ̵$OLJQWKH45FRGHZLWK WKHFDPHUD ̵&OLFNRQWKHLQSXWER[ FXVWRPL]HWKHGHYLFHQDPH DQGFOLFN*HWVWDUWHG    FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: ЬReorient or relocate the receiving antenna. ЬIncrease the separation between the equipment and receiver. ЬConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Shenzhen Xiaoxiang IOT Technology Co., Ltd 217J,2nd Floor,East Side,Phase I,Huiheng Bldg,No. 138,High-tech South 7th Road,High-tech Zone,Yuehai Street,Nanshan District,Shenzhen,Guangdong China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-5-3 To whom it may concern: We, Shenzhen Xiaoxiang IOT Technology Co., Ltd, hereby certify that the equipment for which authorization is sought (FCC ID: 2BF62-WY10) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature JACK JIN Manager Shenzhen Xiaoxiang IOT Technology Co., Ltd 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V03

ShenzhenXiaoxiangIOTTechnologyCo.,Ltd 217J,2ndFloor,EastSide,PhaseI,HuihengBuilding,No.138,High-tech South7thRoad,High-techZone,YuehaiStreet,NanshanDistrict, Shenzhen,GuangdongProvince,China FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 2024/04/28 U.S.AgentDesignation ShenzhenXiaoxiangIOTTechnologyCo.,Ltdacknowledgestheirconsentforthefollowingcontactlocatedin theUnitedStatestoactastheiragentforserviceofprocessfortheequipmentforwhichauthorizationissought (FCCID:2BF62-WY10): NameandcompanyofU.S.agent: PhysicalU.S.addressofagent: FRNofU.S.agent: EmailaddressofU.S.agent: REPAmericaLLC REPAmericaLLC,1942BroadwaySt.STE314CBoulder,CO 80302UnitedStates 0034192500 [email protected] REPAmericaLLCacknowledgestheirobligationtoacceptserviceofprocessonbehalfofShenzhenXiaoxiang IOTTechnologyCo.,Ltd ShenzhenXiaoxiangIOTTechnologyCo.,LtdwiththeFRN[0035356237]acceptsitsobligationtomaintainan agentforserviceofprocessintheUnitedStatesfornolessthanoneyearaftereitherthegranteehaspermanently terminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S.,ortheconclusionofany Commission-relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheverislater. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirementslistedunder§ 2.911(d)(7). TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB 986446D01. Anexpirationdateforthisletterdoesnotexist.IncasetheU.S.agentchanges,thegranteeisobligatedtonotify theFCCwithin30daysviathegrantingTCB. Sincerely, Signature JACKJIN Manager ShenzhenXiaoxiangIOTTechnologyCo.,Ltd Signature BenXu Manager REPAmericaLLC

Shenzhen Xiaoxiang IOT Technology Co., Ltd Add: 217J,2nd Floor,East Side,Phase I,Huiheng Bldg,No. 138,High-tech South 7th Road,High-tech Zone,Yuehai Street,Nanshan District,Shenzhen,Guangdong China Date: 2024-5-3 FCC ID: 2BF62-WY10 Dear Sir/Madam, We, Shenzhen Xiaoxiang IOT Technology Co., Ltd Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: 1MP Wifi IPCamera Model no.: WY10, WY11, WY12, WY13, WY14, WY15, WY16, WY17, WY18, WY19, WY20, WY21, WY22, WY23, WY24, WQ10, WQ11, WQ12, WQ13, WQ14, WQ15, WQ16, WQ17, WQ18, WQ19, WQ20, WQ21, WQ22, WQ23, WQ24, WK10, WK11, WK12, WK13, WK14, WX10, WX11, WX12, WX13, WX14, WX15, WX16, WX17, WX18, WX19, WX20, WX21, WX22, WX23, WX24 Sincerely, Name/Title： JACK JIN/Manager Company: Shenzhen Xiaoxiang IOT Technology Co., Ltd Address: 217J,2nd Floor,East Side,Phase I,Huiheng Bldg,No. 138,High-tech South 7th Road,High-tech Zone,Yuehai Street,Nanshan District,Shenzhen,Guangdong China Phone: 18126108885 Fax: N/A E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-5-3> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2BF62-WY10 WY10 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： JACK JIN/Manager Company: Shenzhen Xiaoxiang IOT Technology Co., Ltd Address: 217J,2nd Floor,East Side,Phase I,Huiheng Bldg,No. 138,High-tech South 7th Road,High-tech Zone,Yuehai Street,Nanshan District,Shenzhen,Guangdong China Phone: 18126108885 Fax: N/A E-Mail: [email protected]

Shenzhen Xiaoxiang IOT Technology Co., Ltd 217J,2nd Floor,East Side,Phase I,Huiheng Bldg,No. 138,High-tech South 7th Road,High-tech Zone,Yuehai Street,Nanshan District,Shenzhen,Guangdong China Date: 2024-5-3 FCC ID: 2BF62-WY10 Model Number: WY10 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Shenzhen Xiaoxiang IOT Technology Co., Ltd, declare that this EUT (FCC ID: 2BF62-WY10) doesn’t have Ad Hoc mode function on “non-US/Canada frequencies”. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title： JACK JIN/Manager Company: Shenzhen Xiaoxiang IOT Technology Co., Ltd Address: 217J,2nd Floor,East Side,Phase I,Huiheng Bldg,No. 138,High-tech South 7th Road,High-tech Zone,Yuehai Street,Nanshan District,Shenzhen,Guangdong China Phone: 18126108885 Fax: N/A E-Mail: [email protected]

Shenzhen Xiaoxiang IOT Technology Co., Ltd 217J,2nd Floor,East Side,Phase I,Huiheng Bldg,No. 138,High-tech South 7th Road,High-tech Zone,Yuehai Street,Nanshan District,Shenzhen,Guangdong China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-5-3 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2BF62-WY10 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： JACK JIN/Manager Company: Shenzhen Xiaoxiang IOT Technology Co., Ltd Address: 217J,2nd Floor,East Side,Phase I,Huiheng Bldg,No. 138,High-tech South 7th Road,High-tech Zone,Yuehai Street,Nanshan District,Shenzhen,Guangdong China Phone: 18126108885 Fax: N/A E-Mail: [email protected]

FCC ID: 2BF62-WY10 External Photos of the EUT FCC ID: 2BF62-WY10 FCC ID: 2BF62-WY10

Label and Location Size: L: 1.0cm*W: 0.5cm Label and Location FCC ID : 2BF62-WY10

FCC ID: 2BF62-WY10 Internal Photos of the EUT BT/2.4G WIFI PIFA Antenna Fake Antenna FCC ID: 2BF62-WY10 FCC ID: 2BF62-WY10 FCC ID: 2BF62-WY10

RF Exposure evaluation FCC ID: 2BF62-WY10 Exposure category: General population/uncontrolled environment EUT Type: Production Unit Device Type: Mobile Device 1. Reference According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. KDB447498 D01: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 2. Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density 3. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 4. Antenna Information WY10 can only use antennas certificated as follows provided by manufacturer; Antenna No. Model No. of antenna: Type of antenna: Gain of the antenna (Max.) Frequency range: BT/2.4GWIFI / PIFA antenna 1.5dBi for 2400-2500MHz; 5. Manufacturing Tolerance BLE GFSK(Peak) Channel Channel 00 Channel 19 Channel 39 Target (dBm) 0.0 -1.0 -1.0 Tolerance ±(dB) 1.0 1.0 1.0 WIFI(Peak) Frequency (MHz) 11b 2412 2437 2462 Target (dBm) 15.0 15.0 15.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 11g 2412 2437 2462 Target (dBm) 15.0 15.0 15.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 11n(HT20) 2412 2437 2462 Target (dBm) 15.0 15.0 15.0 Tolerance ± (dB) 1.0 1.0 1.0 6. Standalone MPE Result As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum EUT RF output power, the minimum separation distance, r =20cm, as well as the gain of the used antenna is 1.5dBi, the RF power density can be obtained. Modulation Type Output power Antenna Gain (dBi) Antenna Gain (linear) MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBm mW BLE 1.0 1.2589 1.50 1.4125 0.0004 1.0000 2.4GWIFI 16.0 39.8107 1.50 1.4125 0.0112 1.0000 Remark: 1. Output power (Peak) including turn-up tolerance; 2. MPE evaluate distance is 20cm from user manual provide by manufacturer. 7. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. ----------------THE END OF REPORT---------------

1. Antenna Description: Antenna type PIFA antenna Model WY10 Frequency range 2400-2500MHz Manufacturer Shenzhen Xiaoxiang IOT Technology Co., Ltd ANT Peak Gain 1.50 dBi 2. Antenna Photo: Length: 38.83mm Width: 7.46mm 3. Test Equipment & Conditions 3.1 Test instrument VSWR is tested using Agilent E5071B connected to a hand mechanism, and the status is free space. 3.2 Test environment and methods 4．Antenna Radiation Pattern 2400MHz 2450MHz 2500MHz

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : FCC ID. ............................................ : CTA24041600201 2BF62-WY10 Compiled by ( position+printed name+signature) .. : File administrators Jinghua Xiao Supervised by ( position+printed name+signature) .. : Project Engineer Zoey Cao Approved by ( position+printed name+signature) .. : RF Manager Eric Wang Date of issue ..................................... : Apr. 29, 2024 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : Shenzhen Xiaoxiang IOT Technology Co., Ltd Address ............................................ : 217J, 2nd Floor, East Side, Phase I, Huiheng Building, No. 138, High-tech South 7th Road, High-tech Zone, Yuehai Street, Nanshan District, Shenzhen, Guangdong Province, China Test specification ...........................: Standard ........................................... : FCC Part 15.247 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Equipment description...................: 1MP Wifi IPCamera Trade Mark ....................................... : N/A Manufacturer .................................... : Shenzhen Xiaoxiang IOT Technology Co., Ltd Model/Type reference....................... : WY10 Listed Models .................................. : Refer to page 2 Modulation ....................................... : GFSK Frequency .......................................... From 2402MHz to 2480MHz Ratings ............................................. : DC 5.0V From external circuit Result................................................ : PASS Report No.: CTA24041600201 Page 2 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : 1MP Wifi IPCamera Model /Type : WY10 Listed Models : WY11, WY12, WY13, WY14, WY15, WY16, WY17, WY18, WY19, WY20, WY21, WY22, WY23, WY24, WQ10, WQ11, WQ12, WQ13, WQ14, WQ15, WQ16, WQ17, WQ18, WQ19, WQ20, WQ21, WQ22, WQ23, WQ24, WK10, WK11, WK12, WK13, WK14, WX10, WX11, WX12, WX13, WX14, WX15, WX16, WX17, WX18, WX19, WX20, WX21, WX22, WX23, WX24 Applicant : Shenzhen Xiaoxiang IOT Technology Co., Ltd Address : 217J, 2nd Floor, East Side, Phase I, Huiheng Building, No. 138, High-tech South 7th Road, High-tech Zone, Yuehai Street, Nanshan District, Shenzhen, Guangdong Province, China Manufacturer : Shenzhen Xiaoxiang IOT Technology Co., Ltd Address : 217J, 2nd Floor, East Side, Phase I, Huiheng Building, No. 138, High-tech South 7th Road, High-tech Zone, Yuehai Street, Nanshan District, Shenzhen, Guangdong Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA24041600201 Page 3 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S ................................................................. 4 2 S U M M A R Y ............................................................................ 5 2.1 General Remarks 5 2.2 Product Description* 5 2.3 Equipment Under Test 5 2.4 Short description of the Equipment under Test (EUT) 5 2.5 EUT operation mode 6 2.6 Block Diagram of Test Setup 6 2.7 Related Submittal(s) / Grant (s) 6 2.8 Modifications 6 3 T E S T E N V I R O N M E N T .............................................................. 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Summary of measurement results 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 T E S T C O N D I T I O N S A N D R E S U L T S ........................................... 11 4.1 AC Power Conducted Emission 11 4.2 Radiated Emissions and Band Edge 14 4.3 Maximum Peak Output Power 21 4.4 Power Spectral Density 22 4.5 6dB Bandwidth 24 4.6 Out-of-band Emissions 26 4.7 Antenna Requirement 30 5 T E S T S E T U P P H O T O S O F T H E E U T ......................................... 31 6 P H O T O S O F T H E E U T ........................................................... 32 Report No.: CTA24041600201 Page 4 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 24…

Text truncated - open the document above for the full version.

Report No.: CTA24041600201 Page 25 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn BLE GFSK 1Mpbs CH00 CH19 CH39 Report No.: CTA24041600201 Page 26 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 4.6 Out-of-band Emissions Limit In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF con-ducted or a radiated measurement, pro-vided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter com-plies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in §15.209(a) is not required. Test Procedure Connect the transmitter output to spectrum analyzer using a low loss RF cable, and set the spectrum analyzer to RBW=100 kHz, VBW= 300 kHz, peak detector , and max hold. Measurements utilizing these setting are made of the in-band reference level, bandedge and out-of-band emissions. Test Configuration EUT SPECTRUM ANALYZER Test Results Remark: The measurement frequency range is from 30MHz to the 10th harmonic of the fundamental frequency. The lowest, middle and highest channels are tested to verify the spurious emissions and bandage measurement data. Test plot as follows: Report No.: CTA24041600201 Page 27 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn GFSK 1Mbps (CH00) GFSK 1Mbps (CH19) reference reference 30MHz-1G 30MHz-1G 1G-26.5G 1G-26.5G Report No.: CTA24041600201 Page 28 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn GFSK 1Mbps (CH39) reference 30MHz-1G 1G-26.5G Report No.: CTA24041600201 Page 29 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Band-edge Measurements for RF Conducted Emissions: BLE GFSK 1Mpbs Left bandedge Right bandedge Report No.: CTA24041600201 Page 30 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 4.7 Antenna Requirement Standard Applicable For intentional device, according to FCC 47 CFR Section 15.203: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited FCC CFR Title 47 Part 15 Subpart C Section 15.247(c) (1) (I): (i) Systems operating in the 2400-2483.5 MHz band that is used exclusively for fixed. Point-to-point operations may employ transmitting antennas with directional gain greater than 6dBi provided the maximum conducted output power of the intentional radiator is reduced by 1 dB for every 3 dB that the directional gain of the antenna exceeds 6dBi. Antenna Connected Construction The gain of antenna was 1.50 dBi. Remark:The antenna gain is provided by the customer , if the data provided by the customer is not accurate, Shenzhen CTA Testing Technology Co., Ltd. does not assume any responsibility. Report No.: CTA24041600201 Page 31 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 5 T e s t S e t u p P h o t o s o f t h e E U T Report No.: CTA24041600201 Page 32 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 6 P h o t o s o f t h e E U T Report No.: CTA24041600201 Page 33 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA24041600201 Page 34 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA24041600201 Page 35 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Report No.: CTA24041600201 Page 36 of 37 Shenzhen CTA Testi…

Text truncated - open the document above for the full version.

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : FCC ID............................................. : CTA24041600202 2BF62-WY10 Compiled by ( position+printed name+signature) . : File administrators Jinghua Xiao Supervised by ( position+printed name+signature) . : Project Engineer Zoey Cao Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Apr. 29, 2024 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Applicant’s name ............................ : Shenzhen Xiaoxiang IOT Technology Co., Ltd Address ............................................ : 217J, 2nd Floor, East Side, Phase I, Huiheng Building, No. 138, High-tech South 7th Road, High-tech Zone, Yuehai Street, Nanshan District, Shenzhen, Guangdong Province, China Test specification ........................... : Standard ........................................... : FCC Part 15.247 TRF Originator .................................. : Shenzhen CTA Testing Technology Co., Ltd. Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : 1MP Wifi IPCamera Trade Mark ....................................... : N/A Manufacturer .................................... : Shenzhen Xiaoxiang IOT Technology Co., Ltd Model/Type reference ...................... : WY10 Listed Models .................................. : Refer to page 2 Modulation Type ............................... : CCK/DSSS/OFDM Operation Frequency ........................ : From 2412 - 2462MHz Rating ............................................... : DC 5.0V From external circuit Result ............................................... : PASS Report No.: CTA24041600202 Page 2 of 36 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E…

Text truncated - open the document above for the full version.