2BFAK-FD7621SModule

FD7621S WIFI Module Datasheet V1.0 Shanghai Neardi Technology Co., Ltd. www.neardi.com FD7621S Neardi Technology www.neardi.com 1 / Shanghai Neardi Technology Co., Ltd. (referred to as "Neardi Technology") always adheres to the customer-first service tenet and provides customers with fast and efficient support services. If you have any needs, please feel free to contact our company, the contact information is as follows: Shanghai Neardi Technology Co., Ltd. www.neardi.com Tel: +86 21 20952021 Email: [email protected] Introduction Neardi Technology provides this document for customers to use as a reference for product design and terminal applications. It is recommended that customers confirm the specifications and parameters provided in the document in detail, and confirm whether it can meet the design or application of the required products. At the same time, it is strongly recommended that customers do detailed tests in actual application scenarios based on the samples provided by our company to ensure that they meet the end use requirements. Neardi Technology is not responsible for any damages suffered due to the use of documents, materials and product functions. The relevant parameters or design charts in this document are only examples, and customers should base their own independent analysis, evaluation and judgment when designing or using terminal products. Before customers use any design or service guided by this document, please read this statement carefully, understand and agree that although Neardi Technology has taken reasonable commercial efforts to provide the best possible experience, this document and its contents are PROVIDED TO YOU ON AN "AS AVAILABLE" BASIS. The information in this document is subject to change without notice. Agreement Unless specifically authorized by Neardi Technology, the recipient of the product documentation, hardware reference drawings, software descriptions and other materials provided by our company must keep the received content confidential and shall not use it for any other purpose other than the implementation and development of this project. Copyright Statement Documents and information provided by our company may not be obtained, used or disclosed to third parties, or such copyrighted materials may be copied, reproduced, plagiarized, published, displayed, translated, distributed or merged, modified or created derivative works unless obtain prior written consent. Neardi Technology has exclusive rights to copyrighted materials and does not grant or convey a license to any patent, copyright, trademark or service mark rights, and no purchase of any kind shall be deemed to be the grant of a license. Neardi Technology has the right to pursue legal responsibility for any illegal infringements that violate confidentiality, use without authorization or maliciously use the documents and information in other illegal forms. © 2023 Shanghai Neardi Technology Co., Ltd. All Rights Reserved. FD7621S Neardi Technology www.neardi.com 2 / Version History Version Date Illustrate V1.0 2026/3/13 Initial Version FD7621S Neardi Technology www.neardi.com 3 / Contents 1 Product Overview .......................................................................................................................... 4 1.1 Product Introduction ........................................................................................................... 4 1.2 Wi-Fi Characteristics ............................................................................................................ 5 1.3 Bluetooth Characteristics .................................................................................................... 5 1.4 Block Diagram ..................................................................................................................... 6 1.5 Parameters .......................................................................................................................... 6 2 Pin Definition ................................................................................................................................. 7 2.1 Pin Number ......................................................................................................................... 7 2.2 Pin Description .................................................................................................................... 7 3 Mechanical Specifications ............................................................................................................. 9 3.1 Mechanical Dimensions ...................................................................................................... 9 3.2 Recommended PCB Layout Footprint ................................................................................. 9 4 Electrical Performance and Reliability ......................................................................................... 10 4.1 Absolute Maximum Voltage Range ................................................................................... 10 4.2 Recommended Operation Conditions ............................................................................... 10 4.3 Power On/Off Sequence.................................................................................................... 10 4.4 Reliability ........................................................................................................................... 11 5 Interface Timing Parameters ....................................................................................................... 12 5.1 SDIO Interface Timing........................................................................................................ 12 5.2 PCM Interface Timing ........................................................................................................ 15 6RF Characteristics .......................................................................................................................... 16 6.1 2.4GH…

Text truncated - open the document above for the full version.

Shenzhen Global Test Service Co.,Ltd. Room No. 101, Building 1, and Room No. 101, Building 3, No. 88 Jinkang Road, Jinsha Community,Kengzi Sub-district, Pingshan District, Shenzhen City, Guangdong ,China RF Exposure evaluation Report Reference No. ................. : FCC ID. ......................................... : GTS20251122004-1-15 2BFAK-FD7621S Compiled by ( position+printed name+signature): File administrators Peter Xiao Supervised by ( position+printed name+signature): Test Engineer Evan Ouyang Approved by ( position+printed name+signature) . : Manager Jason Hu Date of issue .................................... : May.13, 2026 Representative Laboratory Name ....................................................... : Shenzhen Global Test Service Co.,Ltd. Address ......................................... : Room No. 101, Building 1, and Room No. 101, Building 3, No. 88 Jinkang Road, Jinsha Community,Kengzi Sub-district, Pingshan District, Shenzhen City, Guangdong ,China Applicant’s name ......................... : Shanghai Neardi Technology Co., LTD. Address ......................................... : Room A201-60, Building 16, No.99, Huanhu West 1st Road, Lingang New Area, Shanghai, China Test specification ........................ : Standard ........................................ : 47CFR §1.1310 Basis and purpose 47CFR §2.1091 Radiofrequency radiation exposure evaluation: mobile devices TRF Originator .............................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .................. : Module Trade Mark .................................... : neardi Manufacturer ................................. : Shanghai Neardi Technology Co., LTD. Model/Type reference ...................... : FD7621S Listed Models .............................. : N/A Hardware Version ........................ : N/A Software Version ........................... : N/A Rating ............................................ : DC 3.3 V Result ............................................ : PASS Report No.:GTS20251122004-1-15 Page 2 of 20 T E S T R E P O R T Test Report No. : GTS20251122004-1-15 May.13, 2026 ______________________________________________________________________________________________ Date of issue Equipment under Test : Module Model /Type : FD7621S Listed model : N/A Applicant : Shanghai Neardi Technology Co., LTD. Address : Room A201-60, Building 16, No.99, Huanhu West 1st Road, Lingang New Area, Shanghai, China Manufacturer : Shanghai Neardi Technology Co., LTD. Address : Room A201-60, Building 16, No.99, Huanhu West 1st Road, Lingang New Area, Shanghai, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.:GTS20251122004-1-15 Page 3 of 20 Contents 1. SUMMARY ................................................................................................................................................................. 4 1.1. EUT CONFIGURATION ....................................................................................................................................................... 4 1.2. PRODUCT DESCRIPTION .................................................................................................................................................... 4 2. TEST ENVIRONMENT ................................................................................................................................................. 6 2.1 ADDRESS OF THE TEST LABORATORY ..................................................................................................................................... 6 2.2 TEST FACILITY .................................................................................................................................................................. 6 2.3 ENVIRONMENTAL CONDITIONS ............................................................................................................................................ 6 2.4 STATEMENT OF THE MEASUREMENT UNCERTAINTY .................................................................................................................. 6 3. METHOD OF MEASUREMENT .................................................................................................................................... 7 3.1 APPLICABLE STANDARD ...................................................................................................................................................... 7 3.2 REQUIREMENT ................................................................................................................................................................. 7 3.3 LIMIT ............................................................................................................................................................................. 7 3.4 MPE CALCULATION METHOD ............................................................................................................................................. 8 3.5 ANTENNA INFORMATION ................................................................................................................................................... 8 4. CONDUCTED POWER RESULTS ................................................................................................................................... 9 5. MANUFACTURING …

Text truncated - open the document above for the full version.

FCC ID: 2BFAK-FD7621S _______________________________________________________________________________________________ Page 1 of 3 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement Fig. 1 Fig. 2 FCC ID: 2BFAK-FD7621S _______________________________________________________________________________________________ Page 2 of 3 Photo of Conducted Emission Measurement Fig. 3 Fig. 4 FCC ID: 2BFAK-FD7621S _______________________________________________________________________________________________ Page 3 of 3 Photo of DFS Fig. 5

Shenzhen Global Test Service Co.,Ltd. Room No. 101, Building 1, and Room No. 101, Building 3, No. 88 Jinkang Road, Jinsha Community, Kengzi Sub-district, Pingshan District, Shenzhen City, Guangdong ,China FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : FCC ID............................................. : GTS20251122004-1-11 2BFAK-FD7621S Compiled by ( position+printed name+signature) . : File administrators Peter Xiao Supervised by ( position+printed name+signature) . : Test Engineer Evan Ouyang Approved by ( position+printed name+signature) . : Manager Jason Hu Date of issue .................................... : May.13, 2026 Representative Laboratory Name . : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : Room No. 101, Building 1, and Room No. 101, Building 3, No. 88 Jinkang Road, Jinsha Community,Kengzi Sub-district, Pingshan District, Shenzhen City, Guangdong ,China Applicant’s name ............................ : Shanghai Neardi Technology Co., LTD. Address ............................................ : Room A201-60, Building 16, No.99, Huanhu West 1st Road, Lingang New Area, Shanghai, China Test specification ........................... : Standard ........................................... : FCC Part 15.247 TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ...................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Module Trade Mark ....................................... : neardi Manufacturer .................................... : Shanghai Neardi Technology Co., LTD. Model/Type reference ...................... : FD7621S Listed Models .................................. : N/A Modulation Type ............................... : GFSK Operation Frequency ........................ : From 2402MHz to 2480MHz Hardware Version ............................ : N/A Software Version .............................. : N/A Rating ............................................... : DC 3.3 V Result ............................................... : PASS Report No.:GTS20251122004-1-11 Page 2 of 26 T E S T R E P O R T Test Report No. : GTS20251122004-1-11 May.13, 2026 ____________________________________________________________________________________________ Date of issue Equipment under Test : Module Model /Type : FD7621S Listed model : N/A Applicant : Shanghai Neardi Technology Co., LTD. Address : Room A201-60, Building 16, No.99, Huanhu West 1st Road, Lingang New Area, Shanghai, China Manufacturer : Shanghai Neardi Technology Co., LTD. Address : Room A201-60, Building 16, No.99, Huanhu West 1st Road, Lingang New Area, Shanghai, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.:GTS20251122004-1-11 Page 3 of 26 Contents 1. TEST STANDARDS ......................................................................................................................................... 4 2. SUMMARY ....................................................................................................................................................... 5 2.1. General Remarks ................................................................................................................................... 5 2.2. Product Description ................................................................................................................................ 5 2.3. Equipment Under Test ........................................................................................................................... 7 2.4. Short description of the Equipment under Test (EUT) ........................................................................... 7 2.5. EUT operation mode .............................................................................................................................. 7 2.6. Block Diagram of Test Setup ................................................................................................................. 8 2.7. EUT Exercise Software .......................................................................................................................... 8 2.8. Special Accessories ............................................................................................................................... 8 2.9. External I/O Cable .................................................................................................................................. 8 2.10. Related Submittal(s) / Grant (s) ........................................................................................................... 8 2.11. Modifications ........................................................................................................................................ 8 3. TEST ENVIRONMENT ..................................................................................................................................... 9 3.1. Address of the test laboratory ................................................................................................................ 9 3.2. Test Facility ............................................................................................................................................ 9 3.3. Environmental conditions .................................................…

Text truncated - open the document above for the full version.

Shenzhen Global Test Service Co.,Ltd. Room No. 101, Building 1, and Room No. 101, Building 3, No. 88 Jinkang Road, Jinsha Community, Kengzi Sub-district, Pingshan District, Shenzhen City, Guangdong ,China FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. .....................: FCC ID. ............................................ : GTS20251122004-1-12 2BFAK-FD7621S Compiled by ( position+printed name+signature) .. : File administrators Peter Xiao Supervised by ( position+printed name+signature) .. : Test Engineer Evan Ouyang Approved by ( position+printed name+signature) .. : Manager Jason Hu Date of issue ..................................... : May.13, 2026 Representative Laboratory Name .: Shenzhen Global Test Service Co.,Ltd. Address ............................................ : Room No. 101, Building 1, and Room No. 101, Building 3, No. 88 Jinkang Road, Jinsha Community,Kengzi Sub-district, Pingshan District, Shenzhen City, Guangdong ,China Applicant’s name ............................ : Shanghai Neardi Technology Co., LTD. Address ............................................ : Room A201-60, Building 16, No.99, Huanhu West 1st Road, Lingang New Area, Shanghai, China Test specification ...........................: Standard ........................................... : FCC Part 15.247: Operation within the bands 902-928 MHz, 2400- 2483.5 MHz and 5725-5850 MHz TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ....................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: Module Trade Mark ....................................... : neardi Manufacturer .................................... : Shanghai Neardi Technology Co., LTD. Model/Type reference....................... : FD7621S Listed Models .................................. : N/A Operation Frequency ........................ : From 2412MHz to 2462MHz Hardware Version ............................ : N/A Software Version .............................. : N/A Rating ............................................... : DC 3.3 V Result................................................ : PASS Report No.: GTS20251122004-1-12 Page 2 of 29 T E S T R E P O R T Test Report No. : GTS20251122004-1-12 May.13, 2026 ____________________________________________________________________________________ Date of issue Equipment under Test : Module Model /Type : FD7621S Listed model : N/A Applicant : Shanghai Neardi Technology Co., LTD. Address : Room A201-60, Building 16, No.99, Huanhu West 1st Road, Lingang New Area, Shanghai, China Manufacturer : Shanghai Neardi Technology Co., LTD. Address : Room A201-60, Building 16, No.99, Huanhu West 1st Road, Lingang New Area, Shanghai, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20251122004-1-12 Page 3 of 29 Contents 1. TEST STANDARDS ......................................................................................................................................... 4 2. SUMMARY ....................................................................................................................................................... 5 2.1. General Remarks ................................................................................................................................... 5 2.2. Product Description ................................................................................................................................ 5 2.3. Equipment Under Test ........................................................................................................................... 7 2.4. Short description of the Equipment under Test (EUT) ........................................................................... 7 2.5. EUT operation mode .............................................................................................................................. 7 2.6. Block Diagram of Test Setup ................................................................................................................. 7 2.7. Related Submittal(s) / Grant (s) ............................................................................................................. 8 2.8. EUT Exercise Software .......................................................................................................................... 8 2.9. Special Accessories ............................................................................................................................... 8 2.10. External I/O Cable ................................................................................................................................ 8 2.11. Modifications ........................................................................................................................................ 8 3. TEST ENVIRONMENT ..................................................................................................................................... 9 3.1. Address of the test laboratory ................................................................................................................ 9 3.2. Test Facility ............................................................................................................................................ 9 3.3. Environmental conditions ................................…

Text truncated - open the document above for the full version.

FCCID:2BFAK-FD7621S 35 Appendix C.6:Conducted Spurious Emission Test Result TestMode Antenna Frequency[MHz] FreqRange [Mhz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict 11B Ant1 2412 Reference 7.15 7.15 --- PASS 30~1000 7.15 -60.11 ≤-12.85 PASS 1000~26500 7.15 -46.51 ≤-12.85 PASS 2437 Reference 7.58 7.58 --- PASS 30~1000 7.58 -60.76 ≤-12.42 PASS 1000~26500 7.58 -47.56 ≤-12.42 PASS 2462 Reference 8.69 8.69 --- PASS 30~1000 8.69 -59.66 ≤-11.31 PASS 1000~26500 8.69 -47.63 ≤-11.31 PASS 11G Ant1 2412 Reference -2.17 -2.17 --- PASS 30~1000 -2.17 -60.41 ≤-22.17 PASS 1000~26500 -2.17 -47.5 ≤-22.17 PASS 2437 Reference -2.57 -2.57 --- PASS 30~1000 -2.57 -60.13 ≤-22.57 PASS 1000~26500 -2.57 -47.57 ≤-22.57 PASS 2462 Reference -1.99 -1.99 --- PASS 30~1000 -1.99 -59.51 ≤-21.99 PASS 1000~26500 -1.99 -46.6 ≤-21.99 PASS 11N20SISO Ant1 2412 Reference -3.06 -3.06 --- PASS 30~1000 -3.06 -60.1 ≤-23.06 PASS 1000~26500 -3.06 -47.9 ≤-23.06 PASS 2437 Reference -1.94 -1.94 --- PASS 30~1000 -1.94 -60.83 ≤-21.94 PASS 1000~26500 -1.94 -48.13 ≤-21.94 PASS 2462 Reference -0.26 -0.26 --- PASS 30~1000 -0.26 -60.51 ≤-20.26 PASS 1000~26500 -0.26 -46.54 ≤-20.26 PASS 11N40SISO Ant1 2422 Reference -4.15 -4.15 --- PASS 30~1000 -4.15 -60.53 ≤-24.15 PASS 1000~26500 -4.15 -47.47 ≤-24.15 PASS 2437 Reference -5.34 -5.34 --- PASS 30~1000 -5.34 -60.33 ≤-25.34 PASS 1000~26500 -5.34 -47.42 ≤-25.34 PASS 2452 Reference -1.69 -1.69 --- PASS 30~1000 -1.69 -60.2 ≤-21.69 PASS 1000~26500 -1.69 -47.52 ≤-21.69 PASS FCCID:2BFAK-FD7621S 36 11AX20SISO Ant1 2412 Reference -1.12 -1.12 --- PASS 30~1000 -1.12 -59.31 ≤-21.12 PASS 1000~26500 -1.12 -47.48 ≤-21.12 PASS 2437 Reference -1.43 -1.43 --- PASS 30~1000 -1.43 -60.79 ≤-21.43 PASS 1000~26500 -1.43 -47.37 ≤-21.43 PASS 2462 Reference 0.37 0.37 --- PASS 30~1000 0.37 -60.26 ≤-19.63 PASS 1000~26500 0.37 -47.94 ≤-19.63 PASS 11AX40SISO Ant1 2422 Reference -2.52 -2.52 --- PASS 30~1000 -2.52 -60.59 ≤-22.52 PASS 1000~26500 -2.52 -47.18 ≤-22.52 PASS 2437 Reference -2.08 -2.08 --- PASS 30~1000 -2.08 -60.46 ≤-22.08 PASS 1000~26500 -2.08 -47.85 ≤-22.08 PASS 2452 Reference -3.98 -3.98 --- PASS 30~1000 -3.98 -60.01 ≤-23.98 PASS 1000~26500 -3.98 -47.57 ≤-23.98 PASS FCCID:2BFAK-FD7621S 37 Test Graphs 11B_Ant1_2412_0~Reference 11B_Ant1_2412_30~1000 11B_Ant1_2412_1000~26500 FCCID:2BFAK-FD7621S 38 11B_Ant1_2437_0~Reference 11B_Ant1_2437_30~1000 FCCID:2BFAK-FD7621S 39 11B_Ant1_2437_1000~26500 11B_Ant1_2462_0~Reference 11B_Ant1_2462_30~1000 FCCID:2BFAK-FD7621S 40 11B_Ant1_2462_1000~26500 11G_Ant1_2412_0~Reference FCCID:2BFAK-FD7621S 41 11G_Ant1_2412_30~1000 11G_Ant1_2412_1000~26500 11G_Ant1_2437_0~Reference FCCID:2BFAK-FD7621S 42 11G_Ant1_2437_30~1000 11G_Ant1_2437_1000~26500 FCCID:2BFAK-FD7621S 43 11G_Ant1_2462_0~Reference 11G_Ant1_2462_30~1000 11G_Ant1_2462_1000~26500 FCCID:2BFAK-FD7621S 44 11N20SISO_Ant1_2412_0~Reference 11N20SISO_Ant1_2412_30~1000 FCCID:2BFAK-FD7621S 45 11N20SISO_Ant1_2412_1000~26500 11N20SISO_Ant1_2437_0~Reference 11N20SISO_Ant1_2437_30~1000 FCCID:2BFAK-FD7621S 46 11N20SISO_Ant1_2437_1000~26500 11N20SISO_Ant1_2462_0~Reference FCCID:2BFAK-FD7621S 47 11N20SISO_Ant1_2462_30~1000 11N20SISO_Ant1_2462_1000~26500 11N40SISO_Ant1_2422_0~Reference FCCID:2BFAK-FD7621S 48 11N40SISO_Ant1_2422_30~1000 11N40SISO_Ant1_2422_1000~26500 FCCID:2BFAK-FD7621S 49 11N40SISO_Ant1_2437_0~Reference 11N40SISO_Ant1_2437_30~1000 11N40SISO_Ant1_2437_1000~26500 FCCID:2BFAK-FD7621S 50 11N40SISO_Ant1_2452_0~Reference 11N40SISO_Ant1_2452_30~1000 FCCID:2BFAK-FD7621S 51 11N40SISO_Ant1_2452_1000~26500 11AX20SISO_Ant1_2412_0~Reference 11AX20SISO_Ant1_2412_30~1000 FCCID:2BFAK-FD7621S 52 11AX20SISO_Ant1_2412_1000~26500 11AX20SISO_Ant1_2437_0~Reference FCCID:2BFAK-FD7621S 53 11AX20SISO_Ant1_2437_30~1000 11AX20SISO_Ant1_2437_1000~26500 11AX20SISO_Ant1_2462_0~Reference FCCID:2BFAK-FD7621S 54 11AX20SISO_Ant1_2462_30~1000 11AX20SISO_Ant1_2462_1000~26500 FCCID:2BFAK-FD7621S 55 11AX40SISO_Ant1_2422_0~Reference 11AX40SISO_Ant1_2422_30~1000 11AX40SISO_Ant1_2422_1000~26500 FCCID:2BFAK-FD7621S 56 11AX40SISO_Ant1_2437_0~Reference 11AX40SISO_Ant1_2437_30~1000 FCCID:2BFAK-FD7621S 57 11AX40SISO_Ant1_2437_1000~26500 11AX40SISO_Ant1_2452_0~Reference 11AX40SISO_Ant1_2452_30~1000 FCCID:2BFAK-FD7621S 58 11AX40SISO_Ant1_2452_1000~26500 FCCID:2BFAK-FD7621S 59 Appendix C.7: Duty Cycle Test Result TestMode Antenna Frequency [MHz] Transmission Duration [ms] Transmission Period [ms] Duty Cycle [%] Duty Cycle Factor[dB] 1/T Factor [KHz] 11B Ant1 2412 16.47 16.55 99.52 0.02 0.06 2437 16.48 16.55 99.58 0.02 0.06 2462 16.47 16.54 99.58 0.02 0.06 11G Ant1 2412 5.48 5.55 98.74 0.06 0.18 2437 5.49 5.57 98.56 0.06 0.18 2462 5.48 5.56 98.56 0.06 0.18 11N20SISO Ant1 2412 5.37 5.45 98.53 0.06 0.19 2437 5.37 5.45 98.53 0.06 0.19 2462 5.37 5.45 98.53 0.06 0.19 11N40SISO Ant1 2422 5.04 5.11 98.63 0.06 0.20 2437 5.04 5.11 98.63 0.06 0.20 2452 5.03 5.11 98.43 0.07 0.20 11AX20SISO Ant1 2412 4.65 4.72 98.52 0.06 0.22 2437 4.64 4.71 98.51 0.07 0.22 2462 4.64 4.72 98.31 0.07 0.22 11AX40SISO Ant1 2422 4.63 4.70 98.51 0.07 0.22 2437 4.63 4.71 98.30 0.07 0.22 2452 4.63 4.71 98.30 0.07 0.22 FCCID:2BFAK-FD7621S 60 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 FCCID:2BFAK-FD7621S 61 11G_Ant1_2412 11G_Ant1_2437 FCCID:2BFAK-FD7621S 62 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 FCCID:2BFAK-FD7621S 63 11N20SISO_Ant1_2462 11N40SISO_Ant1_2422 FCCID:2BFAK-FD7621S 64 11N40SISO_Ant1_2437 11N40SISO_Ant1_2452 11AX20SISO_Ant1_2412 FCCID:2BFAK…

Text truncated - open the document above for the full version.