2BFBZ-1-5Smart Mattress

Shenzhen Shus Smart Home Co.,Ltd.

Click to zoom

Application Details

Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Date of Grant: Mar 31, 2024
Application Purpose: Original Equipment
Date of Application: Mar 31, 2024
Equipment Note: Smart Mattress
Frequency Range: 2402.00000000 - 2480.00000000
Company: Shenzhen Shus Smart Home Co.,Ltd.
Country: China

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Ь Reorient or relocate the receiving antenna. Ь Increase the separation between the equipment and receiver. Ь Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Ь Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Attestation Statements

ShenzhenShus Smart Home Co.,Ltd. No.8, TangfuRoad,PingshanDistrict,ShenzhenCity, GuangdongProvince,China FederalCommunicationsCommission Authorizationand EvaluationDivision EquipmentAuthorizationBranch 7435 OaklandMills Road Columbia,MD 21046 2024-3-11 U.S. AgentDesignation ShenzhenShus SmartHome Co.,Ltd.acknowledgestheir consentfor the followingcontactlocatedin the UnitedStatesto act as their agent for serviceof processfor the equipmentfor which authorizationis sought FCC ID:2BFBZ-1-5 Nameand companyof U.S. agent:ACT Lab LLC PhysicalU.S. addressof agent: 3280 East 59th StreetLong Beach , CA 90805UnitedStates FRN of U.S. agent: 0033465568 Email addressof U.S. agent: [email protected] ACT Lab LLCacknowledgestheir obligationto acceptserviceof processon behalfof ShenzhenShus SmartHomeCo.,Ltd. ShenzhenShus SmartHomeCo.,Ltd.with the FRN0035090943acceptsits obligationto maintainan agent for serviceof processin the UnitedStatesfor no less than one year after eitherthe granteehas permanently terminatedall marketingand importationof the applicableequipmentwithinthe U.S., or the conclusionof any Commission-relatedadministrativeor judicialproceedinginvolvingthe equipment,whicheveris later. By signingthis form, we confirmthe aboveand that we are awareof the applicationrequirementslisted under§ 2.911(d)(7). The informationprovidedin this letter is basedon the referencedrule parts of Title 47 of the CFR as well as KDB 986446D01. An expirationdate for this letter does not exist. In case the U.S. agent changes,the granteeis obligatedto notify the FCC within 30 days via the grantingTCB. Sincerely, Signature ShuangyingWang Manager ShenzhenShus SmartHomeCo.,Ltd. Signature Scott Huber SeniorTechnicalDirector {U.S. agent Company}ACT Lab LLC 48_[model] US_Agent_2.911(d)(7)-U, V05

Cover Letter(s)

CONFIDENTIALITYREQUEST forCertificationServiceinUSA FederalCommunicationCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21046 Date:<2024-3-11> PursuanttoParagraphs§0.457and0.459oftheCommission’sRules(47C.F.R.)and Section§552(b)(4)oftheFreedomofInformationAct,werequestsconfidentialityfor thefollowingproducts: FCCIDModelname 2BFBZ-1-51-5 Fortheproductstatedabove,werequestthatthefollowinginformationbeheld confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term ConfidentialityDays ExternalPhotos InternalPhotos BlockDiagram Schematics TestSetupPhotos User’sManual PartsList TuneUp OperationalDescriptions Thelong-termconfidentialityexhibitscontainourtradesecretsandproprietary informationthatcouldbeofbenefittoourcompetitors. Theshort-termconfidentialityonthebasisofensuringthatbusinesssensitive informationremainsconfidentialuntiltheactualmarketingofournewdevice. Ifyouhaveanyquestions,pleasefeelfreetocontactmeattheaddressshownbelow. Sincerely, Name/Title： ShuangyingWang/Manager Company: ShenzhenShusSmartHomeCo.,Ltd. Address: No.8,TangfuRoad,PingshanDistrict,ShenzhenCity, GuangdongProvince,China Phone: 15818750927 E-Mail: [email protected]

Cover Letter(s)

External Photos

FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Photo 9 Appearance of EUT

ID Label/Location Info

FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Appendix IID Label FCC ID:2BFBZ-1-5 Model:1-5 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Appendix II ID Label Location

Internal Photos

FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 10 Internal of EUT Photo 11 Appearance of PCB FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Photo 12 Appearance of PCB Photo 13 Appearance of PCB FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Photo 14 Appearance of PCB BT Antenna

RF Exposure Info

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202401-0039-6 Page: 1 of 4 TB-RF-074-1.0 1 A/F., Building.6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao’an, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Exposure Evaluation FCC ID:2BFBZ-1-5 1. Client Information Applicant : Shenzhen Shus Smart Home Co.,Ltd. Address : No.8, Tangfu Road,Pingshan District,Shenzhen City, Guangdong Province Manufacturer : Shenzhen Shus Smart Home Co.,Ltd. Address : No.8, Tangfu Road,Pingshan District,Shenzhen City, Guangdong Province 2. General Description of EUT EUT Name : Smart Mattress Model(s) No. : 1-5 Model Difference : ---- Product Description : Operation Frequency: Bluetooth 5.0: 2402MHz~2480MHz 2.4G Wi-Fi: 2412MHz~2462MHz Antenna Gain: 1.9dBi PCB Antenna Power Supply : Input: 100-240V~50/60Hz, 1.2A Max Output: 12V5A, 60W Software Version : 1.0 Hardware Version : 1.0 Remark: (1) The antenna gain provided by the applicant, the verified for the RF conduction test provided by TOBY test lab. (2) The above antenna information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications, the laboratory shall not be held responsible. Note: More test information about the EUT please refer the RF Test Report. Report No.: TBR-C-202401-0039-6 Page: 2 of 4 TB-RF-074-1.0 SAR Test Exclusion Calculations 1. FCC: According to KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06. (1) Clause 4.3: General SAR test reduction and exclusion guidance Sub clause 4.31: Standalone SAR test exclusion considerations 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6GHz at test separation distance≤5 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤3.0 for 1-g SAR [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤7.5.0 for 10-g SAR 2. Summary simultaneous transmission for SAR Exclusion The SAR exemption limits outlined in clause 4.3.2(b) of KDB 447498 have been derived based on an approximate SAR value of 0.4 W/kg using half-wave dipole antennas Footnote 1. As such, when simultaneous transmitter SAR evaluations include transmitters that have been exempt from routine SAR evaluation, the SAR must be estimating based on the ratio between the maximum tune-up tolerance limit of the transmitter that has been exempt and the exemption limit at the specific distance and frequency for that transmitter. This ratio must be multiplied by 0.4 W/kg(2.0 W/kg for controlled use and 1.0 W/kg for limb worn devices) in order to calculate the estimated SAR level. The estimate SAR value is calculated based the following equation: (maximum power level including tune-up tolerance for transmitter A / maximum power level of exemption at the same frequency and distance) * 0.4W/kg The [∑ of (the highest measured or estimated SAR for each standalone antenna configuration, adjusted for maximum tune-up tolerance) / 1.6 W/kg] + [∑ of MPE ratios] is ≤ 1.0. The SAR to peak location separation ratios of all simultaneously transmitting antenna pairs operating in portable device exposure conditions are all ≤ 0.04, and the [∑ of MPE ratios] is ≤ 1.0. Report No.: TBR-C-202401-0039-6 Page: 3 of 4 TB-RF-074-1.0 3. Calculation: Test separation: 5mm Bluetooth (GFSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 6.17 6±1 7 5.012 1.554 3.0 2.441 6.471 6±1 7 5.012 1.566 3.0 2.480 6.713 7±1 8 6.310 1.987 3.0 Bluetooth (Pi/4-DQPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 5.61 6±1 7 5.012 1.554 3.0 2.441 6.083 6±1 7 5.012 1.566 3.0 2.480 6.303 6±1 7 5.012 1.579 3.0 Bluetooth (8-DPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 6.237 6±1 7 5.012 1.554 3.0 2.441 6.414 6±1 7 5.012 1.566 3.0 2.480 6.783 7±1 8 6.310 1.987 3.0 2.4 G Wi-Fi 802.11b Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.412 7.8 8±1 9 7.943 2.462 3.0 2.437 8.05 8±1 9 7.943 2.482 3.0 2.462 7.72 8±1 9 7.943 2.502 3.0 2.4 G Wi-Fi 802.11g Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.412 7.7 8±1 9 7.943 2.462 3.0 2.437 7.88 8±1 9 7.943 2.482 3.0 2.462 7.91 8±1 9 7.943 2.502 3.0 2.4 G Wi-Fi 802.11n20 Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.412 7.7 8±1 9 7.943 2.462 3.0 2.437 7.57 8±1 9 7.943 2.482 3.0 2.462 7.98 8±1 9 7.943 2.502 3.0 Report No.: TBR-C-202401-0039-6 Page: 4 of 4 TB-RF-074-1.0 2.4 G Wi-Fi 802.11n40 Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.412 7.92 8±1 9 7.943 2.462 3.0 2.437 7.88 8±1 9 7.943 2.482 3.0 2.462 7.88 8±1 9 7.943 2.502 3.0 Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06. -----END OF REPORT-----

Test Report

V . S .W . R < 1.4 Polarization Type V ertical & Horizontal Frequenc Range2400 ~ 2500GHz Input Impendence(ohm)50 Efficiency (dB) 6 0.2 % -3.61.91.2 Maximum Power (dBm)1.7 (XY-plane) Gain (dBi) 0 (Avg Gain XY-plane) Peak EIRP(dBm) 0 .5 Tot. Rad. Pwr. (dBm)-1.2 (Input pwr – loss pwr) Product specification Qu ick Reference Date Antenna m odule on the system board Ant. Port Input Pwr. (dBm)0 (Typ. BT class 2 output power) Directivity (dBi)1 (all direction antenna) Minimu m Power (dBm)-4(XY-plane) Avg. Power (dBm)-0.5(XY-plane) All the technical data and information contained herein are subject to change without prior notice Antenna Layout & module on the system board Antenna Gain Ga in Table XY-planeXZ-planeYZ-plane Peak Avg. Peak Avg. Peak Avg. Module Board 0 1.1-3.0 深圳市千目通讯科技有限公司 Shenzhen Qianmu Communication Technology Co.,Ltd. Return Loss 3D radiation pattern diagram XY -planeXZ-planeYZ-plane

Test Report

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0039-9 Page: 1 of 69 FCC ID:2BFBZ-1-5 TB-RF-074-1.0 RF Test Data for Bluetooth(BDR+EDR) (Conducted Measurements) General Description of EUT Product Name: Smart Mattress Test Model: 1-5 Sample ID: HC-C-202401-0039-08-02# Environmental Conditions Temperature: 25°C Relative Humidity: 55% Test Voltage: AC 120V Test Engineer: Mike Yan Note: For a more detailed features description, please refer to the report TBR-C-202401-0039-9 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0039-9 Page: 2 of 69 FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Contents 1.Duty Cycle ............................................................................................................................................................................................ 3 2.Maximum Conducted Output Power .................................................................................................................................................. 9 3.-20dB Bandwidth ............................................................................................................................................................................... 15 4.Occupied Channel Bandwidth .......................................................................................................................................................... 21 5.Band Edge ......................................................................................................................................................................................... 27 6.Band Edge(Hopping) ......................................................................................................................................................................... 34 7.Conducted RF Spurious Emission ................................................................................................................................................... 41 8.Restrict Band ..................................................................................................................................................................................... 51 9.Carrier Frequencies Separation ....................................................................................................................................................... 58 10.Number of Hopping Channel .......................................................................................................................................................... 61 11.Dwell Time ........................................................................................................................................................................................ 64 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0039-9 Page: 3 of 69 FCC ID:2BFBZ-1-5 TB-RF-074-1.0 1.Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT 1-DH1 2402 Ant1 30.4 5.17 2.63 NVNT 1-DH1 2441 Ant1 30.4 5.17 2.63 NVNT 1-DH1 2480 Ant1 30.16 5.21 2.63 NVNT 2-DH1 2402 Ant1 31.2 5.06 2.56 NVNT 2-DH1 2441 Ant1 31.2 5.06 2.56 NVNT 2-DH1 2480 Ant1 31.2 5.06 2.56 NVNT 3-DH1 2402 Ant1 31.2 5.06 2.56 NVNT 3-DH1 2441 Ant1 31.2 5.06 2.56 NVNT 3-DH1 2480 Ant1 31.2 5.06 2.56 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0039-9 Page: 4 of 69 FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Test Graphs Duty Cycle NVNT 1-DH1 2402MHz Ant1 Duty Cycle NVNT 1-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0039-9 Page: 5 of 69 FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Duty Cycle NVNT 1-DH1 2480MHz Ant1 Duty Cycle NVNT 2-DH1 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0039-9 Page: 6 of 69 FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Duty Cycle NVNT 2-DH1 2441MHz Ant1 Duty Cycle NVNT 2-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0039-9 Page: 7 of 69 FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2402MHz Ant1 Duty Cycle NVNT 3-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0039-9 Page: 8 of 69 FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202401-0039-9 Page: 9 of 69 FCC ID:2BFBZ-1-5 TB-RF-074-1.0 2.Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT 1-DH1 2402 Ant1 6.17 21 Pass NVNT 1-DH1 2441 Ant1 6.471 21 Pass NVNT 1-DH1 2480 Ant1 6.713 21 Pass NVNT 2-DH1 2402 Ant1 5.61 21 Pass NVNT 2-DH1 2441 Ant1 6.083 21 Pass NVNT 2-DH1 2480 Ant1 6.303 21 Pass NVNT 3-DH1 2402 Ant1 6.237 21 Pass NVNT 3-DH1 2441 Ant1 6.414 21 Pass NVNT 3-DH1 2480 Ant1 6.783 21 Pass Shenzhen Toby Technology Co., Ltd. H…

Text truncated - open the document above for the full version.

Test Report

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202401-0039-9 Page: 1 of 58 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID:2BFBZ-1-5 Original Grant Report No. : TBR-C-202401-0039-9 Applicant : Shenzhen Shus Smart Home Co.,Ltd. Equipment Under Test (EUT) EUT Name : Smart Mattress Model No. : 1-5 Series Model No. : ---- Brand Name : SleeponeAi Sample ID : HC-C-202401-0039-08-01# & HC-C-202401-0039-08-02 Receipt Date : 2024-01-25 Test Date : 2024-01-25 to 2024-03-11 Issue Date : 2024-03-11 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Tested By : Mike Yan Reviewed By : Camille Li Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202401-0039-9 Page: 2 of 58 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 6 1.1 Client Information ................................................................................................................. 6 1.2 General Description of EUT (Equipment Under Test) ................................................... 6 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 8 1.4 Description of Support Units .............................................................................................. 8 1.6 Description of Test Software Setting .............................................................................. 10 1.7 Measurement Uncertainty ................................................................................................ 10 1.8 Test Facility ......................................................................................................................... 11 2. TEST SUMMARY ..................................................................................................................... 12 3. TEST SOFTWARE ................................................................................................................... 12 4. TEST EQUIPMENT .................................................................................................................. 13 5. CONDUCTED EMISSION ....................................................................................................... 15 5.1 Test Standard and Limit .................................................................................................... 15 5.2 Test Setup ........................................................................................................................... 15 5.3 Test Procedure ................................................................................................................... 15 5.4 Deviation From Test Standard ......................................................................................... 16 5.5 EUT Operating Mode ........................................................................................................ 16 5.6 Test Data ............................................................................................................................. 16 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 17 6.1 Test Standard and Limit .................................................................................................... 17 6.2 Test Setup ........................................................................................................................... 18 6.3 Test Procedure ................................................................................................................... 19 6.4 Deviation From Test Standard ......................................................................................... 21 6.5 EUT Operating Mode ........................................................................................................ 21 6.6 Test Data ............................................................................................................................. 21 7. EMISSIONS IN RESTRICTED BANDS ............................................................................... 22 7.1 Test Standard and Limit .................................................................................................... 22 7.2 Test Setup ........................................................................................................................... 22 7.3 Test Procedure ................................................................................................................... 23 7.4 Deviation From Test Standard ......................................................................................... 25 7.5 EUT Operating Mode ........................................................................................................ 25 Report No.: TBR-C-202401-0039-9 Page: 3 of 58 TB-RF-074-1.0 7.6 Test Data ............................................................................................................................. 25 8. 99% OCCUPIED AND 20DB BANDWIDTH ........................................................................ 26 8.1 Test Standard and Limit .................................................................................................... 26 8.2 Test Setup ..............................................................…

Text truncated - open the document above for the full version.

Test Setup Photos

FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Appendix V EUT Test Photographs Photo of Setup for Radiated Emission (Below 1 GHz) Photo of Setup for Radiated Emission (Above 1 GHz) FCC ID:2BFBZ-1-5 TB-RF-074-1.0 Photo of Setup for Conducted Emission -----END OF REPORT-----