2BFC6-MICIAI inference device

COMMA FOUR: USER MANUAL High performance AI inference device Specifications ● 3x 2688x1520px image sensor ● 4x CAN-FD ● USB3.1 10Gbps AUX port ● AMOLED display ● Qualcomm SDx845 SoC ● 4GB LPDDR4X RAM ● 128GB UFS2.1 flash storage ● 802.11ac WiFi ● LTE Cat 1bis connectivity ● Dimensions: 86x79x47mm Connectors Power supply 4.5 - 14V DC, 15W max FCC ID: 2BFC6-MICI IC: 32232-MICI Regulatory Information This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s) and complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1. L’appareil ne doit pas produire de brouillage. 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Changes or modifications made to this equipment not expressly approved by comma.ai, Inc. may void the FCC authorization to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC ID: 2BFC6-MICI IC: 32232-MICI Radiofrequency radiation exposure information This equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps. Ce transmetteur ne doit pas être placé au même endroit ou utilisé simultanément avec un autre transmetteur ou antenne. This regulatory information is also accessible in the product’s user interface: FCC ID: 2BFC6-MICI IC: 32232-MICI

ATTESTATION STATEMENT ACCORDING TO 2.911(D)(5)(I) AND 2.911(D)(5)(II) Date: 10/22/2025 FCC ID: 2BFC6-MICI To whom it may concern, Hereby we certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Further we certify that, as of the date of the filing of the application, comma.ai, Inc. is not identified on the Covered List as an entity producing “covered” equipment. Sincerely Yours, Robbe Derks comma.ai

ATTESTATION STATEMENT ACCORDING TO 2.911(D)(7) Date: 10/22/2025 FCC ID: 2BFC6-MICI FRN: 0031108137 To whom it may concern, We, comma.ai, Inc., designate ourselves (comma.ai, Inc.), to act as U.S. agent for service of process. comma.ai, Inc. hereby acknowledges the obligation of the U.S. agent for service of process. Further, comma.ai, Inc. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Sincerely Yours, Robbe Derks comma.ai

LONG-TERM CONFIDENTIALITY REQUEST Date: 08/29/2025 FCC ID: 2BFC6-MICI IC: 32232-MICI To whom it may concern, In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, comma.ai, Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Bill of materials - Operational description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Robbe Derks comma.ai

Annex A101 - Photographs No.1-8329-24-01-01_TR1-A101-R01 October 06, 2025 DescriptionExternal photographs of EUT This document is electronically signed and valid without handwritten signature. Public keys for verification of the electronic signatures can be requested at the testing laboratory. Authorized Rene Oelmann Lab Manager Radio Labs cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-01_TR1-A101-R01 Release 1 - Page 1 of 5 Photo 1 Photo 2 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-01_TR1-A101-R01 Release 1 - Page 2 of 5 Photo 3 Photo 4 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-01_TR1-A101-R01 Release 1 - Page 3 of 5 Photo 5 Photo 6 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-01_TR1-A101-R01 Release 1 - Page 4 of 5 Photo 7 - END OF DOCUMENT - cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-01_TR1-A101-R01 Release 1 - Page 5 of 5

LABEL INFORMATION FCC ID: 2BFC6-MICI IC: 32232-MICI The FCC ID / IC and the regulatory information is displayed electronically inside the user interface as shown: The complete content displayed is: <FCC LOGO> FCC ID: 2BFC6-MICI IC: 32232-MICI Contains FCC ID: XMR2023EG916QGL Contains IC: 10224A-023EG916QGL This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s) and complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1. L'appareil ne doit pas produire de brouillage. 2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre The FCC ID / IC is also present on the packaging lid: The HVIN is present on the outside of the box:

Annex A102 - Photographs No.1-8329-24-01-01_TR1-A102-R01 October 06, 2025 DescriptionInternal photographs of EUT This document is electronically signed and valid without handwritten signature. Public keys for verification of the electronic signatures can be requested at the testing laboratory. Authorized Rene Oelmann Lab Manager Radio Labs cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-01_TR1-A102-R01 Release 1 - Page 1 of 9 Photo 1 Photo 2 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-01_TR1-A102-R01 Release 1 - Page 2 of 9 Photo 3 Photo 4 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-01_TR1-A102-R01 Release 1 - Page 3 of 9 Photo 5 Photo 6 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-01_TR1-A102-R01 Release 1 - Page 4 of 9 Photo 7 Photo 8 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-01_TR1-A102-R01 Release 1 - Page 5 of 9 Photo 9 Photo 10 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-01_TR1-A102-R01 Release 1 - Page 6 of 9 Photo 11 Photo 12 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-01_TR1-A102-R01 Release 1 - Page 7 of 9 Photo 13 Photo 14 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-01_TR1-A102-R01 Release 1 - Page 8 of 9 Photo 15 Photo 16 - END OF DOCUMENT - cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-01_TR1-A102-R01 Release 1 - Page 9 of 9

© cetecom advanced GmbH Page 1 of 9 TEST REPORT Test report no.: 1-8329-24-01-04_TR1-R01 RF Exposure consideration according to FCC447498D04 V1 Testing laboratory Applicant cetecom advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://cetecomadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2018-03) by the Deutsche Akkreditierungsstelle GmbH (DAkkS). The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12047-01-00. ISED Testing Laboratory Recognized Listing Number: DE0001 FCC designation number: DE0002 comma.ai 3900 Harney St 92110 San Diego / UNITED STATES Phone: Contact: Robbe Derks e-mail: [email protected] Manufacturer comma.ai 3900 Harney St 92110 San Diego / UNITED STATES Test Item Kind of test item: Al inference device Model name: comma four FCC ID: 2BFC6-MICI Frequency: LTE 2/4/5/7/12/13/25/26/38/41/66 WLAN 2.4 GHz, 5150 to 5850 MHz Technology: LTE, WLAN This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: Alexander Hnatovskiy Eric Tuettmann Lab Manager Testing Manager Radio Labs Radio Labs Test report no.: 1-8329-24-01-04_TR1-R01 © cetecom advanced GmbH Page 2 of 9 1 Table of contents 1 Table of contents ............................................................................................................................................. 2 2 General Information ......................................................................................................................................... 3 2.1 Notes and Disclaimer ............................................................................................................................ 3 2.2 References ............................................................................................................................................ 3 3 General RF Exposure Test Exemptions ............................................................................................................ 4 3.1 MPE-Based Test Exemption ................................................................................................................. 5 3.2 Simultaneous Transmission ............................................................................................................... 5 4 MPE-Based Test Exemption ............................................................................................................................ 6 4.1 Detailed Description .............................................................................................................................. 6 4.2 Results ................................................................................................................................................... 7 5 Simultaneous Transmission ............................................................................................................................ 8 5.1 Detailed Description .............................................................................................................................. 8 5.2 Result..................................................................................................................................................... 9 6 Conclusion ........................................................................................................................................................ 9 Test report no.: 1-8329-24-01-04_TR1-R01 © cetecom advanced GmbH Page 3 of 9 2 General Information 2.1 Notes and Disclaimer The test results of this test report relate exclusively to the test item specified in this test report. cetecom advanced GmbH does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of cetecom advanced GmbH. The testing service provided by cetecom advanced GmbH has been rendered under the current "General Terms and Conditions for cetecom advanced GmbH". cetecom advanced GmbH will not be liable for any loss or damage resulting from false, inaccurate, inappropriate or incomplete product information provided by the customer. Under no circumstances does the cetecom advanced GmbH test report include any endorsement or warranty regarding the functionality, quality or performance of any other product or service provided. Under no circumstances does the cetecom advanced GmbH test report include or imply any product or service warranties from cetecom advanced GmbH, including, without limitation, any implied warranties of merchantability, fitness for purpose, or non-infringement, all of which are expressly disclaimed by cetecom advanced GmbH. All rights and remedies regarding vendor’s products and services for which cetecom advanced GmbH has prepared this test report shall be provided by the party offering such products or services and not by cetecom advanced GmbH. In no case this test report can be considered as a Letter of Approval. This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. 2.2 References Guidance Version Description 47 CFR 1.1307 Actions that may have a significant environmental effect, for which Environmental Assessments (EAs) must be prepared. 47 CFR 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. 47 CFR 2.1093 Radiofrequenc…

Text truncated - open the document above for the full version.

Description: 2.4-2.5/5.15-7.125GHz Dual band Ceramic 10x3.2x1.5mm PART NUMBER: W3006 Series: Chip Antenna Issue: 2108 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. For more information: Pulse Worldwide HeadquartersPulse/Larsen AntennasEurope HeadquartersPulse (Suzhou) Wireless Products Co, Inc. Pulse GmbH & Do, KG99 HuoJuRoad(#29 Bldg,4 th Phase San Diego, CA 92128Vancouver, WA 98683Zeppelinstrasse15Suzhou New District USAUSAHerrenberg, Germany Jiangsu Province, Suzhou 215009 PR China Tel:1-858-674-8100Tel: 1-360-944-7551 - Tel: 49 7032 7806 0 Tel: 86 512 6807 9998 15255 Innovation Drive #100 18110 SE 34 th St Bldg2 Suite 250 Features: Applications: All dimensions are in inches/mm •2.4-2.5 / 5.15-7.125GHz WIFi-6E •Peak gain 2.2 / 5.2 dBi •Efficiency 60 / 70 % •Compact size W x L x H (10 x 3.2 x 1.5 mm) •Low weight: 240 mg •Fully SMD compatible •Tape and reel packing •RoHS Compliant Product •Moisture Sensitivity Level: MSL1 •Layout 1 for 2.4-2.5 / 5.15-5.85GHz •Layout 2 for 2.4-2.5 / 5.15-7.125GHz •IEEE 802.11a/b/g/n/x •WiFi-6E •5 GHz WLAN •2.4 GHz WLAN •2.4 GHz ISM Band Systems •5GHz ISM Band Systems •ZigBee IEEE 802.15.4 1 Issue: 2108 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Series: Chip Antenna Description: 2.4-2.5/5.15-7.125GHz Dual band Ceramic 10x3.2x1.5mm PART NUMBER: W3006 ELECTRICAL SPECIFICATIONS 2 Frequency 2.4-2.5 / 5.15-5.85 GHz Return Loss -8/-9 dB max Efficiency (typical) 60 / 80 % Peak Gain (typical)1.8 / 4.5dBi WiFi-6E Layout and Matching for 2.4-2.5/5.15-5.85GHz Frequency 2.4-2.5 / 5.15-7.125 GHz Return Loss -5 /-5 dB max Efficiency (typical) 65 / 75 % Peak Gain (typical)1.6 / 4.2dBi Nominal Impedance50 PolarizationLinear Interface SMD mount ceramic antenna Layout and Matching for 2.4-2.5/5.15-7.125GHz Issue: 2108 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Series: Chip Antenna Description: 2.4-2.5/5.15-7.125GHz Dual band Ceramic 10x3.2x1.5mm PART NUMBER: W3006 3 Weight0.24g Size10 x 3.2 x 1.5 mm Operating temperature-40~+85°C Temperature-40~+85°C Humidity Cyclic6 +25°C/+55°C 95% Vibration Sinusoidal 2-8Hz 7.5 mm Sinusoidal 8-200Hz 20 m/s² Shocks0.5 m/s Salt mist96 hours MECHANICALSPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Issue: 2108 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Series: Chip Antenna Description: 2.4-2.5/5.15-7.125GHz Dual band Ceramic 10x3.2x1.5mm PART NUMBER: W3006 MECHANICAL DRAWING AND TERMINAL CONFIGURATION 4 No.Terminal NameTerminal Dimensions 1Feed 1.5 x 2.75 mm 2Support pad1.5 x 2.75 mm Antenna feed pad can be identified by looking top surface metallization pattern 2 1 Issue: 2108 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Series: Chip Antenna Description: 2.4-2.5/5.15-7.125GHz Dual band Ceramic 10x3.2x1.5mm PART NUMBER: W3006 MECHANICAL DRAWING AND TERMINAL CONFIGURATION 5 PWB manufacturing requirements according to IPC-A-600 revision G or similar Shunt matching inductor, 1.5nH with presented setup. Same value for layout 1 and 2 reference boards. Exact inductor value depends on specific application. Ground cleared under antenna Issue: 2108 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession doe…

Text truncated - open the document above for the full version.

TEST REPORT Test report no.: 1-8329-24-01-02_TR1-R02 Testing laboratory Applicant cetecom advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://cetecomadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2018-03) by the Deutsche Akkreditierungsstelle GmbH (DAkkS). The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12047-01-00. ISED Testing Laboratory Recognized Listing Number: DE0001 FCC designation number: DE0002 comma.ai 3900 Harney St 92110 San Diego / UNITED STATES Phone: -/- Contact: Robbe Derks e-mail: [email protected] Manufacturer comma.ai 3900 Harney St 92110 San Diego / UNITED STATES Test standard/s FCC - Title 47 CFR Part 15 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 247 Issue 4 Digital Transmission Systems, Frequency Hopping Systems and Licence-Exempt Local Area Network Devices in 902-928 MHz, 2400-2483.5 MHz, 5150-5350 MHz, and 5470-5895 MHz bands RSS - Gen Issue 5 incl. Amendment 1 & 2 Spectrum Management and Telecommunications Radio Standards Specification - General Requirements for Compliance of Radio Apparatus For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Al inference device Model name: comma four FCC ID: 2BFC6-MICI ISED certification number: 32232-MICI Frequency: 2400 MHz to 2483.5 MHz Technology tested: WLAN Antenna: Integrated antenna Power supply: 4.5 V to 16 V DC by vehicle battery Temperature range: -20°C to +85°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: Marco Bertolino René Oelmann Supervisor Radio Services Lab Manager Radio Labs Radio Labs Test report no.: 1-8329-24-01-02_TR1-R02 © cetecom advanced GmbH Page 2 of 60 1 Table of contents 1 Table of contents .................................................................................................................................... 2 2 General information ................................................................................................................................ 3 2.1 Notes and disclaimer .................................................................................................................... 3 2.2 Application details ........................................................................................................................ 3 2.3 Test laboratories sub-contracted .................................................................................................. 3 3 Test standard/s, references and accreditations ....................................................................................... 4 4 Reporting statements of conformity – decision rule ................................................................................ 5 5 Test environment.................................................................................................................................... 6 6 Test item ................................................................................................................................................ 6 6.1 General description ...................................................................................................................... 6 6.2 Additional information .................................................................................................................. 6 7 Description of the test setup ................................................................................................................... 7 7.1 Shielded semi anechoic chamber .................................................................................................. 8 7.2 Shielded fully anechoic chamber .................................................................................................. 9 7.3 Radiated measurements > 18 GHz .............................................................................................. 11 7.4 Conducted measurements system .............................................................................................. 12 8 Sequence of testing .............................................................................................................................. 13 8.1 Sequence of testing radiated spurious 9 kHz to 30 MHz .............................................................. 13 8.2 Sequence of testing radiated spurious 30 MHz to 1 GHz ............................................................. 14 8.3 Sequence of testing radiated spurious 1 GHz to 18 GHz .............................................................. 15 8.4 Sequence of testing radiated spurious above 18 GHz .................................................................. 16 9 Measurement uncertainty ..................................................................................................................... 17 10 Summary of measurement results ..................................................................................................... 18 11 Additional information and comments ............................................................................................... 19 12 Additional EUT parameter .................................................................................................................. 20 13 Measurement results ........................................................................................................................ 21 13.1 Antenna gain ........................................................................................................................... 2…

Text truncated - open the document above for the full version.

Conducted test results No.1-8329-24-01-02_TR1-A201-R01 September 16, 2025 Test Standard(s)FCC 15.247 - NI FCC 15.247, ISED RSS247 - NI This document is electronically signed and valid without handwritten signature. Public keys for verification of the electronic signatures can be requested at the testing laboratory. Authorized Michael Dorongovski Lab Manager Radio Labs cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-02_TR1-A201-R01 Release 1 - Page 1 of 159 Table of Content FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 b mode4 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 b mode6 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 b mode8 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 g mode10 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 g mode12 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 g mode14 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 n-HT20 mode16 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 n-HT20 mode18 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 n-HT20 mode20 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 n-HT40 mode22 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 n-HT40 mode24 FCC 15.247 # Bandwidth 6dB DTS ~ WLAN2G4 n-HT40 mode26 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 b mode28 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 b mode32 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 b mode36 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 g mode40 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 g mode44 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 g mode48 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 n-HT20 mode52 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 n-HT20 mode56 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 n-HT20 mode60 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 n-HT40 mode64 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 n-HT40 mode68 FCC 15.247, ISED RSS247 # Bandwidth 99PCT and 20dB ~ WLAN2G4 n-HT40 mode72 FCC 15.247 # Peak output power PM DTS ~ WLAN2G4 b mode76 FCC 15.247 # Peak output power PM DTS ~ WLAN2G4 b mode78 FCC 15.247 # Peak output power PM DTS ~ WLAN2G4 b mode80 FCC 15.247 # Peak output power PM DTS ~ WLAN2G4 g mode82 FCC 15.247 # Peak output power PM DTS ~ WLAN2G4 g mode84 FCC 15.247 # Peak output power PM DTS ~ WLAN2G4 g mode86 FCC 15.247 # Peak output power PM DTS ~ WLAN2G4 n-HT20 mode88 FCC 15.247 # Peak output power PM DTS ~ WLAN2G4 n-HT20 mode90 FCC 15.247 # Peak output power PM DTS ~ WLAN2G4 n-HT20 mode92 FCC 15.247 # Peak output power PM DTS ~ WLAN2G4 n-HT40 mode94 FCC 15.247 # Peak output power PM DTS ~ WLAN2G4 n-HT40 mode96 FCC 15.247 # Peak output power PM DTS ~ WLAN2G4 n-HT40 mode98 FCC 15.247 # Peak psd DTS ~ WLAN2G4 b mode100 FCC 15.247 # Peak psd DTS ~ WLAN2G4 b mode102 FCC 15.247 # Peak psd DTS ~ WLAN2G4 b mode104 FCC 15.247 # Peak psd DTS ~ WLAN2G4 g mode106 FCC 15.247 # Peak psd DTS ~ WLAN2G4 g mode108 cetecom advanced GmbH Untertürkheimer Str. 6-10, 66117 Saarbrücken Document No. 1-8329-24-01-02_TR1-A201-R01 Release 1 - Page 2 of 159 FCC 15.247 # Peak psd DTS ~ WLAN2G4 g mode110 FCC 15.247 # Peak psd DTS ~ WLAN2G4 n-HT20 mode112 FCC 15.247 #…

Text truncated - open the document above for the full version.