2BFEN-RP6Retroid Pocket 6(Portable Gaming Computer)

ShenzhenMoorechipTechnologiesCo.,Ltd 5thFloor,EducationIndustryBuilding,Zone71,XingdongCommunity,Xin'anStreet,Bao'anDistrict, Shenzhen,Guangdong518000,China Date:2026-06-21 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA FCCID:2BFEN-RP6 ApplicantFRN:0035115518 USAgent–AttestationStatement/Part2.911(d)(7) ShenzhenMoorechipTechnologiesCo.,Ltdcertifiesthat,asof2026-06-21,wehave designatedFCCUSAgent,LLCtoacceptserviceofprocessonourbehalfforFCCID: 2BFEN-RP6. ShenzhenMoorechipTechnologiesCo.,Ltd,acceptstomaintainanagentofserviceofprocess intheUnitedStatesfornolessthanoneyearaftereitherthegranteehaspermanently terminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S.,orthe conclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolvingthe equipment,whicheverislater. FCCUSAgent,LLC,acceptsasofthedateofthefilingofthisapplication,theobligationof beingthedesignatedagentforthepurposeofacceptingserviceofprocessonbehalfof ShenzhenMoorechipTechnologiesCo.,LtdforFCCID:2BFEN-RP6. DesignatedAgentInformation: CompanyName:FCCUSAgent,LLC U.S.AgentFRN:0033402884 Address:3722IllinoisAvenue,SaintCharles,IL,60174,USA ContactPerson:TimPayne Phone:708-571-3148 Email:[email protected] Sincerely, Company:ShenzhenMoorechipTechnologies Co.,Ltd DesignatedAgent:FCCUSAgent,LLC CompanyRepresentative:yuaLIDesignatedAgentRepresentative:TimPayne Signature:Signature:

ShenzhenMoorechipTechnologiesCo.,Ltd 5thFloor,EducationIndustryBuilding,Zone71,XingdongCommunity,Xin'anStreet,Bao'anDistrict, Shenzhen,Guangdong518000,Chin Date:2026-06-21 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2BFEN-RP6 ToWhomItMayConcern: ShenzhenMoorechipTechnologiesCo.,Ltdcertifiesthattheequipmentforwhichauthorizationissoughtisnot “covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903ofthe FCCrules. ShenzhenMoorechipTechnologiesCo.,Ltdcertifiesthattheequipmentforwhichauthorizationissoughtdoes notincludecybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.oranyofits successorsandassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofitssuccessors andassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446D01Covered EquipmentGuidancesectionB(2a). √Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, Signatory [yuaLI,manager]

ShenzhenMoorechipTechnologiesCo.,Ltd 5thFloor,EducationIndustryBuilding,Zone71,XingdongCommunity,Xin'anStreet,Bao'anDistrict, Shenzhen,Guangdong518000,China Date:2026-06-21 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2BFEN-RP6 ToWhomItMayConcern: ShenzhenMoorechipTechnologiesCo.,Ltdcertifiesthat,asofthedateofthefilingoftheapplication,the applicantisnotidentifiedontheCoveredList(asaspecificallynamedentityoranyofitssubsidiariesor affiliates)asanentityproducing“covered”equipment. Sincerely, Signatory [yuaLI,manager]

ShenzhenMoorechipTechnologiesCo.,Ltd 5thFloor,EducationIndustryBuilding,Zone71,XingdongCommunity,Xin'anStreet,Bao'anDistrict,Shenzhen, Guangdong518000,China Date:2026-08-05 FEDERALCOMMUNICATIONSCOMMISSION AUTHORIZATIONANDEVALUATIONDIVISION 7435OAKLANDMILLSROAD COLUMBIA,MD21046 ProductName:RetroidPocket6(PortableGamingComputer) FCCID:2BFEN-RP6 ModelNo.:RP6 ModelDeclarationLetter-ANNEX DearRegulatoryAuthority, ModelRP6comesintwoversionsofstyles,exceptforthefollowingdifferencesintheleftsidekeypadboardandappearance,allotherPCBboardshavethesamePCBlayout, schematic,andBOM.Tomeetdifferentmarketdemands. Thedifferenceslistasbelow Location1#2# Appearance ShenzhenMoorechipTechnologiesCo.,Ltd 5thFloor,EducationIndustryBuilding,Zone71,XingdongCommunity,Xin'anStreet,Bao'anDistrict,Shenzhen, Guangdong518000,China Leftsidekeypadboard Above,ModificationsthatdonotchangethefundamentalRFcharacteristicsandthatdonotdegradetheunwantedemissionsofthecertifiedproduct.Addedcorresponding differencetests.Fordetails,pleaserefertothetestreport. Sincerely, Signatory [yuaLI,manager]

ShenzhenMoorechipTechnologiesCo.,Ltd 5thFloor,EducationIndustryBuilding,Zone71,XingdongCommunity,Xin'anStreet,Bao'an District,Shenzhen,Guangdong518000,China AgentAuthorization Company:ShenzhenMoorechipTechnologiesCo.,Ltd Address:5thFloor,EducationIndustryBuilding,Zone71,XingdongCommunity, Xin'anStreet,Bao'anDistrict,Shenzhen,Guangdong518000,China ProductName:RetroidPocket6(PortableGamingComputer) ModelNumber(s):RP6 ProductDescription:RetroidPocket6 WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown. Signature:Date:2026-06-21 Name:yuaLI Title:manager Company:ShenzhenMoorechipTechnologiesCo.,Ltd

ShenzhenMoorechipTechnologiesCo.,Ltd 5thFloor,EducationIndustryBuilding,Zone71,XingdongCommunity,Xin'anStreet,Bao'anDistrict, Shenzhen,Guangdong518000,China Date:2026-06-21 FEDERALCOMMUNICATIONSCOMMISSION AUTHORIZATIONANDEVALUATIONDIVISION 7435OAKLANDMILLSROAD COLUMBIA,MD21046 SUBJECT:FCCApplicationforFCCID:2BFEN-RP6 POWEROFATTORNEY ToWhomItMayConcern: We,theundersigned,herebyauthorizeWaltekTestingGroup(Shenzhen)Co.,Ltd.JandySoonourbehalf,to applytotheFederalCommunicationsCommissiononourequipment.AnyandallactscarriedoutbyWaltek TestingGroup(Shenzhen)Co.,Ltd.JandySoonourbehalfshallhavethesameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We,ShenzhenMoorechip TechnologiesCo.,LtdarenotsubjecttoadenialoffederalbenefitspursuanttoSection5301oftheAnti-Drug Actof1988,21USC853a,andnopartytotheapplicationissubjecttoadenialoffederalbenefitspursuantto thatsection. Sincerely, Signatory [yuaLI,manager]

ShenzhenMoorechipTechnologiesCo.,Ltd 5thFloor,EducationIndustryBuilding,Zone71,XingdongCommunity,Xin'anStreet,Bao'anDistrict, Shenzhen,Guangdong518000,China ResponsibilityDeclarationLetterv1.0 ResponsibilityDeclarationLetter Companyname:ShenzhenMoorechipTechnologiesCo.,Ltd Address:5thFloor,EducationIndustryBuilding,Zone71,XingdongCommunity, Xin'anStreet,Bao'anDistrict,Shenzhen,Guangdong518000,China ProductName:RetroidPocket6(PortableGamingComputer) FCCID:2BFEN-RP6 Model(s):RP6 We,ShenzhenMoorechipTechnologiesCo.,Ltdherebyacknowledgethatallthe productinformation(includingalloriginal,drafted,ormodifieddocuments)providedto theTCBeitherbyusorouragentorrepresentative(s)forthepurposesofFCC certificationwillmeetFCCregulationsandrequirements;andthatanymodifications orchangesmadeasaresultofTCBreviewofthedocumentswillbeformally implementedintothemanufacturingprocessandproductdocumentationshippedwith equipment.Wealsoconfirmthatallinformationprovidedislegitimateanddoesnot containanyfalsecontentsuchasforgery,fabrication,alteration,tamperingand concealment. Weassumealleconomicandlegalresponsibilitiesinmattersthatmayariseasa resultofdisclosureonsampleproductsandassociatedproductdocumentation providedforproductcertificationthatmaysubsequentlybefoundtobea mis-representationofthefinalproductandaccompanyingdocumentationwhen produced,marketed,orsoldintheUnitedStates,Canada,oranywhereintheworld. Yoursincerely, Name:yuaLIDate:2026-06-21 TitleandCompanyname:manager,ShenzhenMoorechipTechnologiesCo.,Ltd SignatureofFCCgrantholder(IncludeTitle,Companyname,date,andofficialcompanystamp):

Shenzhen Moorechip Technologies Co.,Ltd 5th Floor, Education Industry Building, Zone 71, Xingdong Community, Xin'an Street, Bao'an District, Shenzhen, Guangdong 518000, China Date: 2026-07-14 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BFEN-RP6 Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. ☒ Block Diagram ☐ Tune-Up Information ☒ Operational Description ☐ Security Information ☒ Schematics ☐ Software Defined Radio (SDR) Information ☐ Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); ☐ External Photos ☒ Test Setup Photos ☒ Internal Photos ☒ User Manual ☐ For 45 days, pursuant to Public Notice DA 04-1705. or ☒ For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory [yua LI, manager]

Reference No.: WTX26X04111831W001/002/003 Page 2 of 22 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS 1#： EUT View 1 EUT View 2 Reference No.: WTX26X04111831W001/002/003 Page 3 of 22 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 3 EUT View 4 Reference No.: WTX26X04111831W001/002/003 Page 4 of 22 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 5 EUT View 6 Reference No.: WTX26X04111831W001/002/003 Page 5 of 22 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn 2#: EUT View 1 EUT View 2 Reference No.: WTX26X04111831W001/002/003 Page 6 of 22 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 3 EUT View 4 Reference No.: WTX26X04111831W001/002/003 Page 7 of 22 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 5 EUT View 6

Reference No.: WTX26X04111831W001/002/003 Page 1 of 22 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the device’s expected lifetime. Proposed Label Location on EUT FCC ID Label Location

Page: 1/10 Ref : ACR.78.6.26.PAR.B Cancel and replace the report ACR.78.6.26.PAR.A WALTEK TESTING GROUP (SHENZHEN) CO., LTD 1/F., ROOM 101, BUILDING 1, HONGWEI INDUSTRIAL PARK, LIUXIAN 2ND ROAD, BLOCK 70 BAO'AN DISTRICT, SHENZHEN, GUANGDONG, 518101 CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: 0725-EPGO-446 Calibrated at MVG 13 Rue du Zephyr 91140 Villejust - FRANCE Calibration date: 03/03/2026 Scope available on :https://a2la.org/ Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E-Field Probe calibration performed at MVG, using the CALIPROBE test bench, for use with a MVG COMO SAR system only. The test results covered by accreditation are traceable to the International System of Units (SI). COMOSAR E-Field Probe Calibration Report 
 

         COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.6.26.PAR.B Page: 2/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Function Date Signature Prepared by : Pedro Ruiz Technical Manager 3/18/2026 Checked & approved by: Pedro Ruiz Technical Manager 3/18/2026 Authorized by: Christophe Barrot Quality Manager Customer Name Distribution : WALTEK TESTING GROUP (SHENZHEN) CO., LTD Issue Name Date Modifications A Pedro Ruiz 3/18/2026 Initial release B Pedro Ruiz 04/10/2026 Update customer address 
 

         

 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.6.26.PAR.B Page: 3/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Sensitivity _______________________________________________________________ 4 3.2 Linearity ________________________________________________________________ 4 3.3 Isotropy _________________________________________________________________ 5 3.4 Boundary Effect __________________________________________________________ 5 3.5 Probe Modulation Response _________________________________________________ 5 4 Measurement Uncertainty .......................................................................................... 6 5 Calibration Results ..................................................................................................... 6 5.1 Calibration in air __________________________________________________________ 6 5.2 Calibration in liquid _______________________________________________________ 7 6 Verification Results ................................................................................................... 8 7 List of Equipment ...................................................................................................... 9 
 

         COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.6.26.PAR.B Page: 4/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number 0725-EPGO-446 Product Condition (new / used) Used Frequency Range of Probe 0.15 GHz-7.5GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.248 M: Dipole 2: R2= 0.216 M: Dipole 3: R3=0.231 M: 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG’s COMOSAR E field Probes are built in accordance to the IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards. Figure 1 – MVG COMOSAR Dosimetric E field Probe Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their effect. All calibrations / measurements performed meet the fore-mentioned standards. 3.1 SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards for frequency range 600- 7500MHz and using the calorimeter cell method (transfer method) as outlined in the standards for frequency 150-450 MHz. 3.2 LINEARITY The evaluation of the linearity was done in free space using the waveguide, performing a power sweep to cover the SAR range 0.01W/kg to 100W/kg. 
 

         COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.6.26.PAR.B Page: 5/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released…

Text truncated - open the document above for the full version.

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 41 TEST REPORT Reference No. .................... : WTX26X04111831W005 FCC ID ................................ : 2BFEN-RP6 Applicant ........................... : Shenzhen Moorechip Technologies Co.,Ltd Address ............................. : 5th Floor, Education Industry Building, Zone 71, Xingdong Community, Xin'an Street, Bao'an District, Shenzhen, Guangdong 518000, China Manufacturer ..................... The same as Applicant Address ............................. The same as Applicant Product Name ................... : Retroid Pocket 6(Portable Gaming Computer) Model No. ........................... : RP6 Standards .......................... : FCC Part 2.1093, IEEE Std C95.1: 2019 IEEE C95.3: 2021 IEC/IEEE 62209-1528:2020 Date of Receipt sample .... : 2026-05-28 Date of Test........................ : 2026-05-28 to 2026-08-12 Date of Issue ..................... : 2026-08-12 Test Report Form No. ....... : WTX_Part2_1093W Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Lily Yang /Project Engineer Jason Su/Manager Reference No.: WTX26X04111831W005 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 41 TABLE OF CONTENTS 1. General Information ................................................................................................................................................... 4 1.1 Product Description for Equipment Under Test (EUT) ......................................................................................... 4 1.2 Test Standards .................................................................................................................................................... 6 1.3 Test Methodology ................................................................................................................................................ 6 1.4 Test Facility ......................................................................................................................................................... 6 2. Summary of Test Results .......................................................................................................................................... 7 3. Specific Absorption Rate (SAR) ................................................................................................................................ 8 3.1 Introduction .......................................................................................................................................................... 8 3.2 SAR Definition ..................................................................................................................................................... 8 4. SAR Measurement System ........................................................................................................................................ 9 4.1 The Measurement System .................................................................................................................................. 9 4.2 Probe ................................................................................................................................................................... 9 4.3 Probe Calibration Process ................................................................................................................................. 11 4.4 Phantom ............................................................................................................................................................ 11 4.5 Device Holder .................................................................................................................................................... 12 4.6 Test Equipment List ........................................................................................................................................... 13 5. Tissue Simulating Liquids ....................................................................................................................................... 14 5.1 Composition of Tissue Simulating Liquid ........................................................................................................... 14 5.2 Tissue Dielectric Parameters for Head and Body Phantoms ............................................................................. 15 5.3 Tissue Calibration Result ................................................................................................................................... 16 6. SAR Measurement Evaluation ................................................................................................................................ 17 6.1 Purpose of System Performance Check ............................................................................................................ 17 6.2 System Setup .................................................................................................................................................... 17 6.3 Validation Results .............................................................................................................................................. 18 7. EUT Testing Position ............................................................................................................................................... 19 7.1 Body Position ........................................…

Text truncated - open the document above for the full version.

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 56 TEST REPORT Reference No. ....................: WTX26X04111831W003 FCC ID ............................... .: 2BFEN-RP6 Applicant .......................... .: Shenzhen Moorechip Technologies Co.,Ltd Address ............................ .: 5th Floor, Education Industry Building, Zone 71, Xingdong Community, Xin'an Street, Bao'an District, Shenzhen, Guangdong 518000, China Manufacturer .................... .: The same as Applicant Address ............................ .: The same as Applicant Product Name .................. .: Retroid Pocket 6(Portable Gaming Computer) Model No.. ......................... .: RP6 Standards ......................... .: FCC Part 15.247 Date of Receipt sample ... .: 2026-04-27 Date of Test....................... .: 2026-04-29 to 2026-06-08 Date of Issue .................... .: 2026-06-15 Test Report Form No. ...... . : WTX_Part 15_247W Test Result ........................ .: Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Dashan Chen/Project Engineer Jason Su/Manager Reference No.: WTX26X04111831W003 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 56 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ......................................................................... 4 1.2 TEST STANDARDS ................................................................................................................................................. 5 1.3 TEST METHODOLOGY ........................................................................................................................................... 5 1.4 TEST FACILITY ...................................................................................................................................................... 5 1.5 EUT SETUP AND TEST MODE .............................................................................................................................. 6 1.6 MEASUREMENT UNCERTAINTY ............................................................................................................................. 7 1.7 TEST EQUIPMENT LIST AND DETAILS ................................................................................................................... 8 2. SUMMARY OF TEST RESULTS ......................................................................................................................... 12 3. ANTENNA REQUIREMENT ................................................................................................................................. 13 3.1 STANDARD APPLICABLE ..................................................................................................................................... 13 3.2 EVALUATION INFORMATION ................................................................................................................................ 13 4. POWER SPECTRAL DENSITY ........................................................................................................................... 14 4.1 STANDARD APPLICABLE ..................................................................................................................................... 14 4.2 TEST SETUP BLOCK DIAGRAM ........................................................................................................................... 14 4.3 TEST PROCEDURE .............................................................................................................................................. 14 4.4 SUMMARY OF TEST RESULTS/PLOTS ................................................................................................................. 14 5. DTS BANDWIDTH ................................................................................................................................................. 15 5.1 STANDARD APPLICABLE ..................................................................................................................................... 15 5.2 TEST SETUP BLOCK DIAGRAM ........................................................................................................................... 15 5.3 TEST PROCEDURE .............................................................................................................................................. 15 5.4 SUMMARY OF TEST RESULTS/PLOTS ................................................................................................................. 15 6. RF OUTPUT POWER ............................................................................................................................................ 16 6.1 STANDARD APPLICABLE ..................................................................................................................................... 16 6.2 TEST SETUP BLOCK DIAGRAM ........................................................................................................................... 16 6.3 TEST PROCEDURE .............................................................................................................................................. 16 6.4 SUMMARY OF TEST RESULTS/PLOTS ......................................................................................................…

Text truncated - open the document above for the full version.

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 145 TEST REPORT Reference No. ....................: WTX26X04111831W001 FCC ID ............................... .: 2BFEN-RP6 Applicant .......................... .: Shenzhen Moorechip Technologies Co.,Ltd Address ............................ .: 5th Floor, Education Industry Building, Zone 71, Xingdong Community, Xin'an Street, Bao'an District, Shenzhen, Guangdong 518000, China Manufacturer .................... .: The same as Applicant Address ............................ .: The same as Applicant Product Name .................. .: Retroid Pocket 6(Portable Gaming Computer) Model No... ........................ .: RP6 Standards ......................... .: FCC Part 15.247 Date of Receipt sample ... .: 2026-04-27 Date of Test....................... …

Text truncated - open the document above for the full version.