2BFGEJT-3988Two Way Radio

, 3 3.`'3 3.`<., 3.`3.`;., 3.`3.`3.` Frequency range : Tx Frequency range : 3.` 3.` Rx 1245789151718 FCC STATEMENTS WARNING AND COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation i s subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference including received interference that may cause undesired operation. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Suc h modifications could void the user’s authority to operate the equipment. Replacement of any transmitter component (crystal, semiconducto r, etc) not authorized by the FCC equipment authorization for this radio could violate FCC rules. WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW. Note: This equipment has been tested and found to comply with t he limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection agai nst harmful interference in a residential installation. This equipm ent generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cau se harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular inst allation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different fro m that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.

Federal C Authoriza 7435 Oa Columbi a Date:Ap r U Jingtong FCC US Jingtong the Unit e all marke any Com is later. FCC US the desi g (Quanzh Designa t Company FRN: 003 Address: Contact P Phone: 7 Email: Su Sincerely Company Co., Ltd Compan y Tel:+86-1 Email: 26 FRN: 003 Signatur e No.288, Communicat ation and Ev kland Mills R a, MD 21046 r.12, 2024 US Agen (Quanzhou Agent, LLC (Quanzhou ed States fo eting and im mmission-rela Agent, LLC gnated agen ou) Electron ted Agent In y Name: FCC 33402884 3722 Illinoi s Person: Tim 708-571-3148 upport@FCC y, y: Jingtong ( y Represent 1516001686 60255131@q 35132356 e: Jingto , Si Huang ind tions Comm valuation Div Road 6 nt – Atte ) Electronics to accept se ) Electronics r no less tha mportation of ated adminis , accepts as nt for the p nics Co., Ltd nformation: C US Agent, s Avenue, Sa Payne 8 CUSAgent.co Quanzhou) ative: [Anson 63 qq.com ong (Qua ustry zone, Xi mission vision estation s Co., Ltd c ervice of pro s Co., Ltd a an one year f the applica strative or ju s of the date purpose of a for FCC ID: : , LLC aint Charles, om Electronics n Huang] nzhou) E amei Town, N Statem ertifies, that ocess on our accepts to m r after either able equipm udicial proce of the filing accepting se : 2BFGEJT-3 , IL, 60174, U Designat Designat Signature lectronic Nan An, Quanz ment / Pa t as of Apr.1 r behalf for F maintain an a r the grantee ment within t eding involv of this appl ervice of pr 3988. USA ted Agent: F ted Agent Re e: s Co., Ltd zhou, Fujian, C art 2.91 2, 2024, we FCC ID: 2BF agent of ser e has perma the U.S., or ving the equ ication, the o rocess on b CC US Agen epresentativ d China 1(d)(7) e have desig FGEJT-3988 rvice of proc anently term the conclus ipment, whic obligation of behalf of Jin nt, LLC e: Tim Payn gnated 8. cess in minated sion of chever f being ngtong e

Jingtong (Quanzhou) Electronics Co., Ltd No.288, Si Huang industry zone, Xiamei Town, Nan An, Quanzhou, Fujian, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Apr.11, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BFGEJT-3988 FRN: 0035132356 Jingtong (Quanzhou) Electronics Co., Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, ______________________ Anson Huang , manager

Jingtong (Quanzhou) Electronics Co., Ltd No.288, Si Huang industry zone, Xiamei Town, Nan An, Quanzhou, Fujian, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Apr.11, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BFGEJT-3988 FRN: 0035132356 Jingtong (Quanzhou) Electronics Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, ______________________ Anson Huang , manager

Jingtong (Quanzhou) Electronics Co., Ltd No.288, Si Huang industry zone, Xiamei Town, Nan An, Quanzhou, Fujian, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Apr.11, 2024 Subject; Request for Confidentiality FCC ID: 2BFGEJT-3988 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely ______________________ Anson Huang , manager

Jingtong (Quanzhou) Electronics Co., Ltd No.288, Si Huang industry zone, Xiamei Town, Nan An, Quanzhou, Fujian, China Date: 2024-04-12 Declaration Letter FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Declaration of compliance to the requirements of §15.121 FCC ID: 2BFGEJT-3988 Dear Sir/Madam, We declare that, this scanning receiver is incapable of operating (tuning), or readily being altered by the users to operate, within the frequency bands allocated to the Cellular Radiotelephone Service in part 22 of this chapter (cellular telephone bands). This device will not be able to receive transmissions in the cellular telephone bands by means of clipping the leads of, or installing, a simple component such as a diode, resistor or jumper wire; replacing a plug-in semiconductor chip; or programming a semiconductor chip using special access codes or an external device, such as a personal computer. This device is also incapable of converting digital cellular communication transmissions to analog voice audio. This device is designed so that the tuning, control and filtering circuitry is inaccessible. Any attempts to modify the equipment to receive transmissions from the Cellular Radiotelephone Service will render the receiver inoperable.This scanning receiver rejects any signals from the Cellular Radiotelephone Service frequency bands that are 38 dB or lower based upon a 12 dB SINAD measurement. We are aware that the modification of this device to receive transmissions from Cellular Radiotelephone Service frequency bands will be considered to constitute manufacture of such equipment. This includes any individual, individuals, entity or organization that modifies one or more scanners. Any modification to receive transmissions from the Cellular Radiotelephone Service frequency bands voids the certification of the scanning receiver, regardless of the date of manufacture of the original unit. Sincerely Yours, Signature: ______________________ Anson Huang , manager

Report No.: AGC04536240301AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Antenna Report No.: AGC04536240301AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC04536240301AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC04536240301AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 40mm&30mm FCC ID:2BFGEJT-3988 WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW.

Report No.: AGC04536240301AP02 Page 1 of 6 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC04536240301AP02 Page 2 of 6 OPEN VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC04536240301AP02 Page 3 of 6 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC04536240301AP02 Page 4 of 6 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) Report No.: AGC04536240301AP02 Page 5 of 6 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) Report No.: AGC04536240301AP02 Page 6 of 6 INTERNAL VIEW OF EUT (FIGURE 8) INTERNAL VIEW OF EUT (FIGURE 9) ****************************************End of Report*************************************

Page 1 of 27 FCC Test Report Report No.: AGC04536240301FE01 FCC ID : 2BFGEJT-3988 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Two Way Radio BRAND NAME : N/A MODEL NAME : JT-3988, JT-3988PLUS, JT-6000, JT-6000PLUS, JT-3988MAX, JT-3988HP, JT-3988 APPLICANT : Jingtong (Quanzhou) Electronics Co., Ltd DATE OF ISSUE : Apr. 02, 2024 STANDARD(S) : FCC Part 15 Subpart B REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC04536240301FE01 Page 2 of 27 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Apr. 02, 2024 Valid Initial Release Report No.: AGC04536240301FE01 Page 3 of 27 TABLE OF CONTENTS 1. GENERAL INFORMATION .............................................................................................................................. 4 2. PRODUCT INFORMATION .............................................................................................................................. 5 2.1 PRODUCT TECHNICAL DESCRIPTION ................................................................................................ 5 2.2 AUXILIARY SURROUNDING DESCRIPTION ........................................................................................ 5 2.3 TEST METHODOLOGY .......................................................................................................................... 6 2.4 DESCRIPTION OF TEST MODES .......................................................................................................... 6 3. TEST ENVIRONMENT ..................................................................................................................................... 7 3.1 ADDRESS OF THE TEST LABORATORY .............................................................................................. 7 3.2 TEST FACILITY ....................................................................................................................................... 7 3.3 ENVIRONMENTAL CONDITIONS........................................................................................................... 8 3.4 MEASUREMENT UNCERTAINTY .......................................................................................................... 8 3.5 LIST OF EQUIPMENTS USED ............................................................................................................... 9 4. SUMMARY OF TEST RESULTS .................................................................................................................... 10 5. RADIATED EMISSION MEASUREMENTS ................................................................................................... 11 5.1 PROVISIONS APPLICABLE .................................................................................................................. 11 5.2 MEASUREMENT SETUP ...................................................................................................................... 11 5.3 MEASUREMENT PROCEDURE ........................................................................................................... 12 5.4 MEASUREMENT RESULT .................................................................................................................... 14 6. CONDUCTED EMISSION MEASUREMENTS ............................................................................................... 18 6.1 PROVISIONS APPLICABLE .................................................................................................................. 18 6.2 MEASUREMENT SETUP ...................................................................................................................... 18 6.3 MEASUREMENT PROCEDURE ........................................................................................................... 19 6.4 MEASUREMENT RESULT .................................................................................................................... 20 7. ANTENNA CONDUCTED POWER FOR RECEIVERS ................................................................................. 22 7.1 PROVISIONS APPLICABLE .................................................................................................................. 22 7.2 MEASUREMENT SETUP ...................................................................................................................... 22 7.3 MEASUREMENT PROCEDURE ........................................................................................................... 22 7.4 MEASUREMENT RESULT .................................................................................................................... 23 8. SCANNING RECEIVERS AND FREQUENCY CONVERTERS USED WITH SCANNING RECEIVERS .... 25 8.1 PROVISIONS APPLICABLE .................................................................................................................. 25 8.2 MEASUREMENT SETUP ...................................................................................................................... 25 8.3 MEASUREMENT PROCEDURE ........................................................................................................... 25 8.4 MEASUREMENT RESULT .................................................................................................................... 26 APPENDIX I: PHOTOGRAPHS OF TEST SETUP ............................................................................................ 27 APPENDIX II: PHOTOGRAPHS OF TEST EUT ............................................................................................... 27 Report No.: AGC04536240301FE01 Page 4 of 27 1. GENERAL INFORMATION Applicant Jingtong (Quanzhou) Electronics Co., Ltd Address No.288, Si Huang industry zone, Xiamei Town, Nan An, Quanzhou, Fujian, China Manufacturer Jingtong (Quanzhou) Electronics Co., Ltd Address No.288, Si Huang industry zone, Xiamei Town, Nan An, Quanzhou, Fujian, China Factory Jingtong (Quanzhou) Electronics Co., Ltd Address No.288, Si Huang industry zone,…

Text truncated - open the document above for the full version.

Report No.: AGC04536240301AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP-BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC04536240301AP01 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP ****************************************End of Report*************************************