2BFIF-HY75K110Smart Meeting Tablet

Jiangxi Giwei technology Co.,limited 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Jiangxi Giwei technology Co.,limited Address: No.7, Liuxing industrial park, Jinggangshan economical and technological development zone, Ji'an, Jiangxi province, china Product Name: Smart Meeting Tablet FCC ID: 2BFIF-HY75K110 Model(s): GW-HY75K110, GW-HY 2.911(d)(5)(i) Equipment Type We, [Jiangxi Giwei technology Co.,limited] certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: QingchunZhu Date: Apr.10, 2024 Title and Company name: manager / Jiangxi Giwei technology Co.,limited NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Jiangxi Giwei technology Co.,limited 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Jiangxi Giwei technology Co.,limited Address: No.7, Liuxing industrial park, Jinggangshan economical and technological development zone, Ji'an, Jiangxi province, china Product Name: Smart Meeting Tablet FCC ID: 2BFIF-HY75K110 Model(s): GW-HY75K110, GW-HY 2.911(d)(5)(ii) Applicant filing We, [Jiangxi Giwei technology Co.,limited] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: QingchunZhu Date: Apr.10, 2024 Title and Company name: manager / Jiangxi Giwei technology Co.,limited NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Jiangxi Giwei technology Co.,limited 2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name: Jiangxi Giwei technology Co.,limited Address: No.7, Liuxing industrial park, Jinggangshan economical and technological development zone, Ji'an, Jiangxi province, china Product Name: Smart Meeting Tablet FCC ID: 2BFIF-HY75K110 Model(s): GW-HY75K110, GW-HY 2.911(d)(7) USA Designated Agent for Service of Process We, [Jiangxi Giwei technology Co.,limited] (“the applicant”) designate [[Electronic Mac, Inc.] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Electronic Mac, Inc. USA Address: 6525 Crown Blvd, # 20805, San Jose, CA 95120 FRN Number: 0033414541 Contact Name: Ray Sia Telephone No: 408-332-2399 Email: [email protected] Applicant Company name: Jiangxi Giwei technology Co.,limited Address: No.7, Liuxing industrial park, Jinggangshan economical and technological development zone, Ji'an, Jiangxi province, china Grantee FRN Number: 0035150945 FCC Grantee Code: 2BFIF Contact Name: QingchunZhu Telephone No: 13923793044 Email: [email protected] Jiangxi Giwei technology Co.,limited 2.911 (d)(7)USA Agent v1.5 Signature: Title: Manger Signature: Title: Manger Date: Dec.10, 2024 Date: Nov.09, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

FCC Software Configuration Control Declaration Rev1.1.docx Jiangxi Giwei technology Co.,limited FCC Software Configuration Control Declaration Date: April 10, 2024 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Smart Meeting Tablet GW-HY75K110, GW-HY Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: QingchunZhu Date: Apr.10, 2024 Title: Manager Signature of applicant

Jiangxi Giwei technology Co.,limited Agent Authorization Company: Jiangxi Giwei technology Co.,limited Address: No.7, Liuxing industrial park, Jinggangshan economical and technological development zone, Ji'an, Jiangxi province, china Product Name: Smart Meeting Tablet Model Number(s): GW-HY75K110, GW-HY Product Description: Smart Meeting Tablet We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Apr.10, 2024 Name: QingchunZhu Title: Manger Company: Jiangxi Giwei technology Co.,limited

Jiangxi Giwei technology Co.,limited Family models declaration letter. Date: April 10, 2024 We Jiangxi Giwei technology Co.,limited Of No.7, Liuxing industrial park, Jinggangshan economical and technological development zone, Ji'an, Jiangxi province, china Product: Smart Meeting Tablet Model Name: GW-HY75K110 Serial Model: GW-HY Difference description of series models: All the model are the same circuit and RF module, except the model names and colors Thanks Sincerely Signature Name: QingchunZhu Date: Apr.10, 2024 Title: Manger

Jiangxi Giwei technology Co.,limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 10, 2024 Subject; Request for Confidentiality FCC ID: 2BFIF-HY75K110 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: QingchunZhu Title: Manger

1 / 1 80MM*60MM Label

FCC ID: 2BFIF-HY75K110 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. FCC ID: 2BFIF-HY75K110 Test Result of RF Exposure Evaluation The source of the evaluation data results is based on the test report ET-24020144E01/02/03 2.4G WIFI Antenna gain=3.43dBi BT Antenna gain=3.43dBi 5G WIFI Antenna gain=3.58dBi FOR BLE (AIC8800) Mode Output power (dBm) Output power (mW) Numeric antenna gain Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result GFSK 2.46 1.76 2.20 0.00077 1.0 PASS FOR 2.4GWIFI (AIC8800) Mode Output power (dBm) Output power (mW) Numeric antenna gain Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11b 13.07 20.28 2.20 0.0089 1.0 PASS 802.11g 10.74 11.86 2.20 0.0052 1.0 PASS 802.11n20 10.63 11.56 2.20 0.0051 1.0 PASS 802.11n40 9.20 8.32 2.20 0.0036 1.0 PASS FOR 5GWIFI (AIC8800) Mode Output power (dBm) Output power (mW) Numeric antenna gain Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11a 12.47 17.66 2.28 0.0080 1.0 PASS 802.11n20 12.54 17.95 2.28 0.0081 1.0 PASS 802.11ac20 12.35 17.18 2.28 0.0078 1.0 PASS 802.11n40 12.06 16.07 2.28 0.0073 1.0 PASS 802.11ac40 12.22 16.67 2.28 0.0076 1.0 PASS 802.11ac80 12.71 18.66 2.28 0.0085 1.0 PASS FOR 5.8GWIFI(AIC8800) Mode Output power (dBm) Output power (mW) Numeric antenna gain Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11a 10.84 12.13 2.28 0.0055 1.0 PASS 802.11n20 9.95 9.89 2.28 0.0045 1.0 PASS 802.11ac20 9.84 9.64 2.28 0.0044 1.0 PASS 802.11n40 9.63 9.18 2.28 0.0042 1.0 PASS 802.11ac40 9.90 9.77 2.28 0.0044 1.0 PASS 802.11ac80 9.83 9.62 2.28 0.0044 1.0 PASS FCC ID: 2BFIF-HY75K110 FOR 2.4GWIFI (RTL8818) Mode Output power (dBm) Output power (mW) Numeric antenna gain Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11b 10.59 11.46 2.20 0.0050 1.0 PASS 802.11g 14.82 30.34 2.20 0.0133 1.0 PASS 802.11n20 14.76 29.92 2.20 0.0131 1.0 PASS 802.11n40 14.43 27.73 2.20 0.0121 1.0 PASS If (RTL8818) and (AIC8800) work simultaneously BLE(AIC8800)+2.4G(RTL8818)+2.4G(AIC8800), the total power density is 0.00077/1+0.0133/1+0.0089/1=0.02297<1. BLE(AIC8800)+2.4G(RTL8818)+5G(AIC8800), the total power density is 0.00077/1+0.0133/1+0.0085/1=0.02257<1. BLE(AIC8800)+2.4G(RTL8818)+5.8G(AIC8800), the total power density is 0.00077/1+0.0133/1+0.0055/1=0.01957<1. Maximum power density=0.02297 <1.Then SAR evaluation is not require .

Report No.: ET-24020144E03 This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen ETR Standard Technology Co., Ltd. TEST REPORT Applicant: Jiangxi Giwei technology Co.,limited Address of Applicant: No.7, Liuxing industrial park, Jinggangshan economical and technological development zone, Ji'an, Jiangxi province, china Manufacturer/Factory: Jiangxi Giwei technology Co.,limited Address of Manufacturer No.7, Liuxing industrial park, Jinggangshan economical and technological development zone, Ji'an, Jiangxi province, china Product Name: Smart Meeting Tablet Model No.: GW-HY75K110, GW-HY Trade Mark: GIWEI FCC ID: 2BFIF-HY75K110 Applicable standards: FCC CFR Title 47 Part 15 Subpart E Section 15.407 Date of Test: Mar.08, 2024-Mar.28, 2024 Date of report issued: Apr.10,2024 Test Result : PASS * Remark: * In the configuration tested, the EUT complied with the standards specified above. The results shown in this test report refer only to the sample(s) tested , this test report cannot be reproduced, except in full without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver Prepared By Shenzhen ETR Standard Technology Co., Ltd. Address: No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Compiled by: Reviewed by: Approved by: Project Engineer Project Manager Authorized Signature - Page 2 of 67 Report No.: ET-24020144E03 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Report Revision History Report No. Description Issue Date ET-24020144E03 Original Apr.10,2024 - Page 3 of 67 Report No.: ET-24020144E03 Tel:(86-755) 85259392 Email:[email protected] Web: www.etrlab.cn No.103, No.10, Phase I, Zone 3, Xinxing Industrial Park, Xinhe, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Contents Page 1 TEST SUMMARY ......................................................................................................................................4 1.1 MEASUREMENT UNCERTAINTY .............................................................................................................4 2 GENERAL INFORMATION .......................................................................................................................5 2.1 GENERAL DESCRIPTION OF EUT ..........................................................................................................5 2.2 TEST MODE .........................................................................................................................................7 2.3 DESCRIPTION OF SUPPORT UNITS ........................................................................................................8 2.4 DEVIATION FROM STANDARDS ..............................................................................................................8 2.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................8 2.6 TEST FACILITY ....................................................................................................................................8 2.7 TEST LOCATION ..................................................................................................................................8 2.8 ADDITIONAL INSTRUCTIONS ..................................................................................................................8 3 TEST INSTRUMENTS LIST ......................................................................................................................9 4 TEST RESULTS AND MEASUREMENT DATA .....................................................................................10 4.1 ANTENNA REQUIREMENT ....................................................................................................................10 4.2 CONDUCTED EMISSIONS ....................................................................................................................11 4.3 DUTY CYCLE ......................................................................................................................................14 4.4 CONDUCTED OUTPUT POWER ............................................................................................................18 4.5 BANDWIDTH 99% OCCUPY BANDWIDTH .............................................................................................20 4.6 POWER SPECTRAL DENSITY ..............................................................................................................31 4.7 BAND EDGE .......................................................................................................................................39 4.7.1 Conducted test Method ...............................................................................................................39 4.8 SPURIOUS EMISSION .........................................................................................................................46 4.8.1 Radiated Emission Method .........................................................................................................46 4.8.2 Conducted Emission Method ......................................................................................................54 4.9 FREQUENCY STABILITY ......................................................................................................................61 5 TEST SETUP PHOTO .............................................................................................................................67 6 EUT CONSTRUCTIONAL DETAILS .......................................................................................................67 - Page 4 of 67 Report No.: ET-24020144E03 Tel:(86-75…

Text truncated - open the document above for the full version.

DongguanXiaoshuaiElectronicTechnologyCo.,Ltd ProductRecognitionLetter SPECIFICATIONFORAPPROVED CUSTOMER: PRODUCTS:5G-2DBadhesiverodantenna PARTNO: 2HM2(femaleneedle)2HG2(maleneedle) Spec.: Data:2022.05.16 Thevast ocean WangXiao Alen ANTENNASPECIFICATION 1Physicalmap 2. ElectricalCharacteristics Test EnvironmentConditions TemperatureOrdinaryTemperature(5 to 35 °C) HumidityOrdinaryHumidity(25 to 85% RH) ANTENNASPECIFICATION ANTENNASPECIFICATION Efficiency ANTENNASPECIFICATION Frequency (MHz) Efficiency(%) Gain(dBi) 2400MHz55.972.78 2410MHz55.122.83 2420MHz54.982.89 2430MHz54.542.93 2440MHz53.312.94 2450MHz55.66 3.05 2460MHz57.983.10 2470MHz57.93.15 2480MHz57.663.06 2490MHz54.572.84 2500MHz51.213.43 5150MHz56.343.58 5200MHz59.663.26 5250MHz60.212.96 5300MHz63.722.91 5350MHz62.792.98 5400MHz62.213.45 5450MHz62.823.04 5500MHz60.593.34 5550MHz62.933.27 5600MHz57.192.88 5650MHz62.423.53 5700MHz61.223.54 5750MHz61.613.59 5800MHz59.93.14 5850MHz62.443.38