2BFIISL120SSolar Light

www.duewot.com Model: SL-120 1 120LED Solar Powered PIR Sensor Flood Light User Manual Please Charge the Light for 6 hours before Use Brief introduction： 1. It is an energy saving and portable solar powered flood light. 2. Suitable for the county road, yard, garage, patio, garden, park, orchard, etc. 3. Easy to install, wiring free, no electricity needed. 4. Energy saving with three optional working modes. Specifications: 1. Solar Panel：6V/3.5W 2. Battery：3.2V/2200mAh Li-ion battery 3. LED：120pcs SMD2835 4. Luminous：1000LM 6. Sensor range: 120°, 26ft. 6. IP rate: IP65 waterproof. Instruction： 1. Auto dusk-to-dawn operation with 3 optional working modes 2. Choose one of three working modes before installation as below: a. Press the "ON/OFF" button to turn on the mode 1: Dim light and induction. No motion, dim light; when motion detected, bright light for 15s. b. Press the "Mode" button to switch the mode 2: No motion, no light; when motion detected, bright light for 15s. c. Press the "Mode" button again to switch the mode 3: Always-on bright light for about 6-8 hours until battery protection level. d. Press the "ON/OFF" button, the light will be turned off. 3. After setting and installation, the working mode will work automatically according to the setting. 4. Mode 2 is recommended for longer operation hours. 5. The light will be fully charged within 6-8 hours; charging time depends on the weather condition; the more sunlight exposure, the shorter charging time. Attention： 1. Make sure the light is turned to "on" status before installation. 2. Install the light in places with maximum sunlight exposure. 3. Clean the solar panel regularly to ensure effective charging. 4. Turn off the light if you do not use it for a long time. 5. Please do not put the battery into the fire to avoid exploding. 2 3 Charge the light in the sunlight for 6-8 hours 2 -It lightup automatically during Sensordetection range. Automaticcharging during the day time. Press the buttonto choose working mode. Automatically light up, then automatically dim, off, or always-on in the night according to the selected working mode. Installation Notice The light is adjustable with 90° left and right , 180° up and down。 Warranty : 4 1 years. If any problem please contact with Duewot customer service team: [email protected] 3. Drilltwo holes, insert the plastic expansionpillar, and tighten thescrew. 4. Adjustthe light to suitable direction. Ideal height is 3-5m/10-16.4ft. 1. Screw up theboltto fixthe light with the support pole. 2. Screw up the bolt to fixthe support FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Zhongpeng Zhineng Zhaoming Keji (Dongguan) Co., Ltd Covered Equipment Certification Attestation Letter Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BFIISL120S Zhongpeng Zhineng Zhaoming Keji (Dongguan) Co., Ltd certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Zhongpeng Zhineng Zhaoming Keji (Dongguan) Co., Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Zhong Peng Chen Title: VP Company Name: Zhongpeng Zhineng Zhaoming Keji (Dongguan) Co., Ltd Date: 3/21/2024

Zhongpeng Zhineng Zhaoming Keji (Dongguan) Co., Ltd * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BFIISL120S FRN of applicant: 0035151158 Per section 2.911(d)(7) of the FCC rules, Zhongpeng Zhineng Zhaoming Keji (Dongguan) Co., Ltd certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: Baihetian Innovative Solutions FCC Registration Number (FRN): 0033401605 Physical U.S. Company Address: 6837 Chase Rd, Dearborn, MI 48126, USA Contact Person: Kenneth Young Agent Email Address: [email protected] The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Signed: Printed name: Zhong Peng Chen Title: VP Company Name: Zhongpeng Zhineng Zhaoming Keji (Dongguan) Co., Ltd Date: 3/21/2024 Agent Signed: Signed: Printed name: Kenneth Young Title: Manager Company Name: Baihetian Innovative Solutions Date: 3/21/2024

DATE : 2024-03-21 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Jason Wu of Global United Technology Services Co., Ltd.and No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Zhongpeng Zhineng Zhaoming Keji (Dongguan) Co., Ltd and No.38, Zhongcang Lu,Shuikou, Dalang Town, Dongguan, GuangDong, China Signature: Name: Zhong Peng Chen Title: VP Company: Zhongpeng Zhineng Zhaoming Keji (Dongguan) Co., Ltd

DATE : 2024-03-21 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BFIISL120S Product Name: Solar Light Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signature: Name: Zhong Peng Chen Title: VP Company: Zhongpeng Zhineng Zhaoming Keji (Dongguan) Co., Ltd

Differences Declaration To whom concern, We company Zhongpeng Zhineng Zhaoming Keji (Dongguan) Co., Ltd hereby declares: The product models SL-120, SL-120-B, SL-140, SL-158, SL-171, SL-174 are identical in the same PCB layout, interior structure and electrical circuits, the difference is model name for commercial purpose. Authorized signature: Name: Zhong Peng Chen Date: 2024-03-21

Page 1 of 4 Page 2 of 4 Page 3 of 4 Page 4 of 4 Page 1 of 3 Page 2 of 3 Page 3 of 3

Label size: 40*20 mm

Page 1 of 4 Page 2 of 4 Page 3 of 4 Page 4 of 4

Global United Technology Services Co., Ltd. Report No.: GTS2024030021F01 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 22 TEST REPORT Applicant: Zhongpeng Zhineng Zhaoming Keji (Dongguan) Co., Ltd Address of Applicant: No.38, Zhongcang Lu,Shuikou, Dalang Town, Dongguan, GuangDong, China Manufacturer: Shenzhen Shi Zhongneng Hengxin Dianzi Youxian Gongsi Address of Manufacturer: 4 Lou, 15 Dong Changfang, Xifa Xiaoqu, Yintian Gongye Qu, Xiaxiang Jiedao, Baoan Qu, Shenzhen, China Equipment Under Test (EUT) Product Name: Solar Light Model No.: SL-120, SL-120-B, SL-140, SL-158, SL-171, SL-174 FCC ID: 2BFIISL120S Applicable standards: FCC CFR Title 47 Part 15 Subpart B Date of sample receipt: March 01, 2024 Date of Test: March 01-05, 2024 Date of report issued: March 05, 2024 Test Result : Pass * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS2024030021F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 22 2 Version Version No. Date Description 00 March 05, 2024 Original Prepared by: Date: March 05, 2024 Project Engineer Reviewed by: Date: March 05, 2024 Reviewer Report No.: GTS2024030021F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 22 3 Contents 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE AND TEST VOLTAGE .......................................................................................................... 5 5.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 5 5.4 DEVIATION FROM STANDARDS ............................................................................................................. 5 5.5 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 5 5.6 TEST FACILITY .................................................................................................................................... 5 5.7 TEST LOCATION .................................................................................................................................. 5 6 TEST INSTRUMENTS LIST ..................................................................................................................... 6 7 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 7 7.1 RADIATED EMISSION ........................................................................................................................... 7 8 TEST SETUP PHOTO ............................................................................................................................ 11 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 12 Report No.: GTS2024030021F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 4 of 22 4 Test Summary Test Item Test Requirement Test Method Class / Severity Result Conducted Emission FCC Part15.107 ANSI C63.4 Class B N/A Radiated Emissions # FCC Part15.109 ANSI C63.4 Class B PASS Remark: 1. Pass: The EUT complies with the essential requirements in the standard. 2. N/A: Not applicable 3. # Refer to FCC Part 15.33 (b)(1) conditional testing procedure : Highest frequency generated or used in the device or on which the device operates or tunes (MHz) Upper frequency of measurement range (MHz) Below 1.705 30 1.705-108 1000 108-500 2000 500-1000 5000 Above 1000 5th harmonic of the highest frequency or 40 GHz, whichever is lower. Measurement Uncertainty Test Item Frequency Range Measurement Uncertainty Notes Radiated Emission 30MHz-200MHz 3.8039dB (1) Radiated Emission 200MHz-1GHz 3.9679dB (1) Radiated Emission 1GHz-18GHz 4.29dB (1) AC Power Line Conducted Emission 0.15MHz ~ 30MHz 3.44dB (1) Note (1): The measurement uncertainty is for coverage factor of k=2 and a level of confidence of 95%. Report No.: GTS2024030021F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 5 of 22 5 G…

Text truncated - open the document above for the full version.

Page 1 of 1 Radiated Emission