2BFV9-VK59KIDS SMART WATCH

User Manual  Carefully review this manual before operating the product.  Retain this manual for future reference after reviewing.  Product images in this manual are for reference purposes only.  While this product is designed for safe use, improper usage may lead to accidents. Adhere to all warnings and cautions for optimal safety.  All information in this document is accurate as of the issue date, subject to change without prior notice. 1.Getting started 1. Check that the device is the correct model and all accessories are in the box. 2. Prepare a 4G LTE Nano SIM card, can ask for your dealer if have any questions. 3. Necessary to activate data flow, GPRS and caller ID functions. 2.Insert a SIM card. 1. Please turn off the watch before inserting the SIM Card. The type of card is Nano size. 2. Remove the SIM card protective cover. Use the provided tool to take the SIM tray out. 3. Put the Nano-SIM card in the holder and make sure that the card's angle corner fixes the holder. Then gently insert the holder back into device. (If your model does not have a SIM tray, just insert the SIM card into the slot and make sure that the SIM card is in the direction which is shown on the screen protector of device.) 3.Switch on and off Switch on： If the device is off the power, long press the power button for 3~5 seconds to turn on. Switch off： 1: Enter the settings of device, choose the power off option. 2: When the device is crashed, you can use remote shut down on the PC or Mobile client. 3: When there is not a SIM card, long press the power button to turn the device. 4.Charging the device 1. When you receive the low battery notification from device or the phone app, please charge the device in time. 2. When battery is under 15%, device will turn into the power saving mode and functions are restricted except the incoming call answer. 3. During charging, the device will turn into restricted mode and please do not use. Charging Connect the metal contacts on the charging port to those on the back of the device, then put them on a flat surface. Connect the charging cradle to a power supply, the device's screen will light up and display the process of charging. CAUTION: The metal contacts and charging port is magnetic. Please keep it away from other metal in avoid of accidental short circuit. • The charging dock is not water resistant. Wipe the port, metal contacts, and the device dry during charging. • Long press the power button over 20s to active the battery when the device is fully charged after not used for longtime. 5.Product diagram 6.APP USING 6.1 Get the app Scan the QR code below to download the APP or tap the device information on the watch menu and find the download QR code to scan and download. 6.2 Register and login in. Please follow the steps in the APP to register and login in. 6.3Bind with the device. Login in the APP and find the correct device. The correct device type is SMART WATCH. Enter the registration code to bind with device. About the registration code: （1）Scan the QR code on the back of device or manually enter the 15 numbers length code （2）Enter the device information page and find the registration code, scan or manual input. 6.4Account bind and management • Upon initial binding with the device, the associated account is automatically designated as the admin. • For guest accounts seeking to bind with and manage the device, admin approval is required. • Admins can review and approve guest requests by receiving notifications on the pairing page of the phone app. 7.Functions Location: GPS +AGPS+ LBS +WIFI Location real time on Map. Trace: Find the trace in APP. Safety area: Set fence(safety area) in the device(Max 3 fences),And notify you in APP when watch wearer reach or out of the appointed area. Contact: Setting up maximum 15 members of your friends or relative in APP. Dial interface: Dial interface is supported. You can turn on or off this function in switch settings of APP. SOS: 3 emergency contacts can be set. Press the SOS BUTTON(The button on some models is the power button) for 3 more seconds and it will make an emergency call to the appointed contacts in turns. If there is no one answering, it will continue to dial twice in turns and stop. Message notification: Notify you when the device turns on or off the SOS function in SMS.(The fees of SMS are calculated according to your local carrier) Alarms: Set 3 alarm clocks. Camera: Take a photo. Gallery: Save the photos, and you can delete in it or upload photos to the APP. Micro chat: Real time chat between the device and the APP. APP can text or send 15s voice message to the device. And device can read one unread message each time and only send voice message. Video call ：Make a video call with the bind account on Mobile or another device. Do not disturb: Set 4 periods in one time. Block all calls and keep silent mode in this appointed period. Setting: Change UI(Some model is not adapted), Volume(Medium, Ringtone, Alarms, Power on and off), Brightness, Date and time, Volte, Power off, About device(Model, Version, IMEI) What is in Device Information: 1. Registration code: Scan it to register device. 2. Official account: Scan it to follow us to get more information. 3. APP download: Download the Setracker APP Quick math ：Game for kids. With 3 levels for challenging Stopwatch ：For time measuring Calculator：For usual math calculating Members: Show the account of family members who is bind with the device. Watch faces: Long press on the idle screen to switch different style of watch faces(some models may not support) Scenarios: 3 modes（Normal，Battery saving, Follow），the default is Normal mode. Love heart: You can set this in the APP. And the Love heart can be only shown on the interface of watch. Remote shut down: Remote shutting down order to the watch when it is power on. Remote restart ：Send a remote restarting message to the watch. And restart the device. 8.Problems fixing If the device cannot connect to the server in y…

Text truncated - open the document above for the full version.

11 Band7-20MHz-QPSK-21100-1RB#0-PASS Band7-20MHz-16QAM-21100-1RB#0-PASS Band7-20MHz-QPSK-21100-100RB#0-PASS Band7-20MHz-16QAM-21100-100RB#0-PASS Band7-20MHz-QPSK-21350-1RB#0-PASS Band7-20MHz-16QAM-21350-1RB#0-PASS Band7-20MHz-QPSK-21350-100RB#0-PASS Band7-20MHz-16QAM-21350-100RB#0-PASS 12 APPENDIX C: 26DB BANDWIDTH AND OCCUPIED BANDWIDTH Band Bandwidth Modulation Channel RB Configuration Occupied Bandwidth (MHz) 26dB Bandwidth (MHz) Verdict Band7 5MHz QPSK 20775 25RB#0 4.5039 4.979 PASS Band7 5MHz 16QAM 20775 25RB#0 4.5009 4.963 PASS Band7 5MHz QPSK 21100 25RB#0 4.5034 4.981 PASS Band7 5MHz 16QAM 21100 25RB#0 4.5109 4.982 PASS Band7 5MHz QPSK 21425 25RB#0 4.5125 5.004 PASS Band7 5MHz 16QAM 21425 25RB#0 4.5330 4.999 PASS Band7 10MHz QPSK 20800 50RB#0 8.9908 9.939 PASS Band7 10MHz 16QAM 20800 50RB#0 8.9848 9.976 PASS Band7 10MHz QPSK 21100 50RB#0 8.9666 9.905 PASS Band7 10MHz 16QAM 21100 50RB#0 9.0005 9.944 PASS Band7 10MHz QPSK 21400 50RB#0 9.0108 9.928 PASS Band7 10MHz 16QAM 21400 50RB#0 9.0010 9.979 PASS Band7 15MHz QPSK 20825 75RB#0 13.465 14.99 PASS Band7 15MHz 16QAM 20825 75RB#0 13.514 14.82 PASS Band7 15MHz QPSK 21100 75RB#0 13.458 14.83 PASS Band7 15MHz 16QAM 21100 75RB#0 13.522 14.97 PASS Band7 15MHz QPSK 21375 75RB#0 13.526 14.96 PASS Band7 15MHz 16QAM 21375 75RB#0 13.514 14.86 PASS Band7 20MHz QPSK 20850 100RB#0 17.975 19.78 PASS Band7 20MHz 16QAM 20850 100RB#0 17.982 19.56 PASS Band7 20MHz QPSK 21100 100RB#0 18.043 19.82 PASS Band7 20MHz 16QAM 21100 100RB#0 18.007 19.73 PASS Band7 20MHz QPSK 21350 100RB#0 18.002 19.61 PASS Band7 20MHz 16QAM 21350 100RB#0 18.014 19.66 PASS 13 Band7-5MHz-QPSK-20775-25RB#0-PASS Band7-5MHz-16QAM-20775-25RB#0-PASS Band7-5MHz-QPSK-21100-25RB#0-PASS Band7-5MHz-16QAM-21100-25RB#0-PASS Band7-5MHz-QPSK-21425-25RB#0-PASS Band7-5MHz-16QAM-21425-25RB#0-PASS Band7-10MHz-QPSK-20800-50RB#0-PASS Band7-10MHz-16QAM-20800-50RB#0-PASS 14 Band7-10MHz-QPSK-21100-50RB#0-PASS Band7-10MHz-16QAM-21100-50RB#0-PASS Band7-10MHz-QPSK-21400-50RB#0-PASS Band7-10MHz-16QAM-21400-50RB#0-PASS Band7-15MHz-QPSK-20825-75RB#0-PASS Band7-15MHz-16QAM-20825-75RB#0-PASS Band7-15MHz-QPSK-21100-75RB#0-PASS Band7-15MHz-16QAM-21100-75RB#0-PASS 15 Band7-15MHz-QPSK-21375-75RB#0-PASS Band7-15MHz-16QAM-21375-75RB#0-PASS Band7-20MHz-QPSK-20850-100RB#0-PASS Band7-20MHz-16QAM-20850-100RB#0-PASS Band7-20MHz-QPSK-21100-100RB#0-PASS Band7-20MHz-16QAM-21100-100RB#0-PASS Band7-20MHz-QPSK-21350-100RB#0-PASS Band7-20MHz-16QAM-21350-100RB#0-PASS 16 APPENDIX D: BAND EDGE Band Bandwidth Modulation Channel RB Configuration Result(dBm) Verdict Band7 5MHz QPSK 20775 1RB#0 -47.15 PASS Band7 5MHz 16QAM 20775 1RB#0 -30.87 PASS Band7 5MHz QPSK 20775 1RB#24 -47.16 PASS Band7 5MHz 16QAM 20775 1RB#24 -47.22 PASS Band7 5MHz QPSK 20775 25RB#0 -30.03 PASS Band7 5MHz 16QAM 20775 25RB#0 -30.16 PASS Band7 5MHz QPSK 21425 1RB#0 -46.63 PASS Band7 5MHz 16QAM 21425 1RB#0 -46.64 PASS Band7 5MHz QPSK 21425 1RB#24 -45.86 PASS Band7 5MHz 16QAM 21425 1RB#24 -45.58 PASS Band7 5MHz QPSK 21425 25RB#0 -39.60 PASS Band7 5MHz 16QAM 21425 25RB#0 -39.90 PASS Band7 10MHz QPSK 20800 1RB#0 -47.07 PASS Band7 10MHz 16QAM 20800 1RB#0 -47.09 PASS Band7 10MHz QPSK 20800 1RB#49 -47.16 PASS Band7 10MHz 16QAM 20800 1RB#49 -47.16 PASS Band7 10MHz QPSK 20800 50RB#0 -44.54 PASS Band7 10MHz 16QAM 20800 50RB#0 -44.77 PASS Band7 10MHz QPSK 21400 1RB#0 -46.82 PASS Band7 10MHz 16QAM 21400 1RB#0 -46.83 PASS Band7 10MHz QPSK 21400 1RB#49 -46.73 PASS Band7 10MHz 16QAM 21400 1RB#49 -46.74 PASS Band7 10MHz QPSK 21400 50RB#0 -41.26 PASS Band7 10MHz 16QAM 21400 50RB#0 -40.41 PASS Band7 15MHz QPSK 20825 1RB#0 -46.72 PASS Band7 15MHz 16QAM 20825 1RB#0 -46.88 PASS Band7 15MHz QPSK 20825 1RB#74 -44.92 PASS Band7 15MHz 16QAM 20825 1RB#74 -46.14 PASS Band7 15MHz QPSK 20825 75RB#0 -39.73 PASS Band7 15MHz 16QAM 20825 75RB#0 -41.49 PASS Band7 15MHz QPSK 21375 1RB#0 -46.88 PASS Band7 15MHz 16QAM 21375 1RB#0 -46.90 PASS Band7 15MHz QPSK 21375 1RB#74 -46.91 PASS Band7 15MHz 16QAM 21375 1RB#74 -46.88 PASS Band7 15MHz QPSK 21375 75RB#0 -42.95 PASS Band7 15MHz 16QAM 21375 75RB#0 -42.47 PASS Band7 20MHz QPSK 20850 1RB#0 -47.07 PASS Band7 20MHz 16QAM 20850 1RB#0 -47.11 PASS Band7 20MHz QPSK 20850 1RB#99 -47.10 PASS Band7 20MHz 16QAM 20850 1RB#99 -47.16 PASS Band7 20MHz QPSK 20850 100RB#0 -38.35 PASS Band7 20MHz 16QAM 20850 100RB#0 -39.75 PASS Band7 20MHz QPSK 21350 1RB#0 -46.96 PASS Band7 20MHz 16QAM 21350 1RB#0 -46.96 PASS Band7 20MHz QPSK 21350 1RB#99 -46.95 PASS Band7 20MHz 16QAM 21350 1RB#99 -46.96 PASS Band7 20MHz QPSK 21350 100RB#0 -46.02 PASS Band7 20MHz 16QAM 21350 100RB#0 -45.76 PASS 17 Band7-5MHz-QPSK-20775-1RB#0-PASS Band7-5MHz-16QAM-20775-1RB#0-PASS Band7-5MHz-QPSK-20775-1RB#24-PASS Band7-5MHz-16QAM-20775-1RB#24-PASS Band7-5MHz-QPSK-20775-25RB#0-PASS Band7-5MHz-16QAM-20775-25RB#0-PASS Band7-5MHz-QPSK-21425-1RB#0-PASS Band7-5MHz-16QAM-21425-1RB#0-PASS 18 Band7-5MHz-QPSK-21425-1RB#24-PASS Band7-5MHz-16QAM-21425-1RB#24-PASS Band7-5MHz-QPSK-21425-25RB#0-PASS Band7-5MHz-16QAM-21425-25RB#0-PASS Band7-10MHz-QPSK-20800-1RB#0-PASS Band7-10MHz-16QAM-20800-1RB#0-PASS Band7-10MHz-QPSK-20800-1RB#49-PASS Band7-10MHz-16QAM-20800-1RB#49-PASS 19 Band7-10MHz-QPSK-20800-50RB#0-PASS Band7-10MHz-16QAM-20800-50RB#0-PASS Band7-10MHz-QPSK-21400-1RB#0-PASS Band7-10MHz-16QAM-21400-1RB#0-PASS Band7-10MHz-QPSK-21400-1RB#49-PASS Band7-10MHz-16QAM-21400-1RB#49-PASS Band7-10MHz-QPSK-21400-50RB#0-PASS Band7-10MHz-16QAM-21400-50RB#0-PASS 20 Band7-15MHz-QPSK-20825-1RB#0-PASS Band7-15MHz-16QAM-20825-1RB#0-PASS Band7-15MHz-QPSK-20825-1RB#74-PASS Band7-15MHz-16QAM-20825-1RB#74-PASS Band7-15MHz-QPSK-20825-75RB#0-PASS Band7-15MHz-16QAM-20825-75RB#0-PASS Band7-15MHz-QPSK-21375-1RB#0-PASS Band7-15MHz-16QAM-21375-1RB#0-PASS

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China TEST REPORT FCC Part 22 Subpart H Report Reference No. .....................: FCC ID. .............................................: CTA26052902204 2BFV9-VK59 Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue ..................................... : Jul. 27, 2026 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : SHENZHEN SHENGYE TECHNOLOGY CO., LTD Address ............................................ : 5th Floor, Building B, Chanfukechuang Building, Shanshui 2nd Road, Yuanshan Subdistrict, Longgang District, Shenzhen, China Test specification ........................... : Standard ........................................... : FCC CFR Title 47 Part 2, Part 22H ANSI/TIA-603-E-2016 KDB 971168 D01 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ......................: KIDS SMART WATCH Trade Mark ....................................... : ROADTRIP Manufacturer .................................. : SHENZHEN SHENGYE TECHNOLOGY CO., LTD Model/Type reference ....................... : VK59 Listed Models ............................. : VK59LB, VK59P, VK26, VK39, VK55, VK26, VD36, VM11, VD42, VD38, VD91, VK63, VK68, VK72, VK75, VK79, VD45, VD48, VD52, VD95, VM15, VM18, VM21 Ratings ............................................. : Input: DC 5V 0.35A Modulation ....................................... : QPSK, 16QAM Frequency ......................................... : E-UTRA Band 5 Result................................................ : PASS Report No.: CTA26052902204 Page 2 of 23 TEST REPORT Equipment under Test : KIDS SMART WATCH Model /Type : VK59 Listed Models VK59LB, VK59P, VK26, VK39, VK55, VK26, VD36, VM11, VD42, VD38, VD91, VK63, VK68, VK72, VK75, VK79, VD45, VD48, VD52, VD95, VM15, VM18, VM21 Model difference : The PCB board, circuit, structure and internal of these models are the same, only model number and colour are different for these models. So the tests were performed on model VK59 and the test results for the main test model can cover the listed models. Applicant : SHENZHEN SHENGYE TECHNOLOGY CO., LTD Address : 5th Floor, Building B, Chanfukechuang Building, Shanshui 2nd Road, Yuanshan Subdistrict, Longgang District, Shenzhen, China Manufacturer : SHENZHEN SHENGYE TECHNOLOGY CO., LTD Address : 5th Floor, Building B, Chanfukechuang Building, Shanshui 2nd Road, Yuanshan Subdistrict, Longgang District, Shenzhen, China Test result Pass * * In the configuration tested, the EUT complied with the standards specified page 4. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26052902204 Page 3 of 23 Contents 1 SUMMARY ................................................................................................................................. 4 TEST STANDARDS ......................................................................................................... 4 Test Description ............................................................................................................... 4 Address of the test laboratory .......................................................................................... 5 Test Facility ...................................................................................................................... 5 Statement of the measurement uncertainty ..................................................................... 5 2 GENERAL INFORMATION ......................................................................................................... 6 Environmental conditions ................................................................................................. 6 General Description of EUT ............................................................................................. 6 Description of Test Modes and Test Frequency ................................................................ 6 Equipments Used during the Test .................................................................................... 7 Related Submittal(s) / Grant (s) ....................................................................................... 9 Modifications ................................................................................................................... 9 3 TEST CONDITIONS AND RESULTS ........................................................................................ 10 Output Power ................................................................................................................ 10 Peak-to-Average Ratio (PAR) ........................................................................................ 14 Occupied Bandwidth and Emission Bandwidth .............................................................. 15 Band Edge compliance .................................................................................................. 16 Spurious Emission ...............…

Text truncated - open the document above for the full version.

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China TEST REPORT FCC Part 24 Subpart E Report Reference No. .....................: FCC ID. .............................................: CTA26052902203 2BFV9-VK59 Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue ..................................... : Jul. 27, 2026 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : SHENZHEN SHENGYE TECHNOLOGY CO., LTD Address ............................................ : 5th Floor, Building B, Chanfukechuang Building, Shanshui 2nd Road, Yuanshan Subdistrict, Longgang District, Shenzhen, China Test specification ........................... : Standard ........................................... : FCC CFR Title 47 Part 2, Part 24E ANSI/TIA-603-E-2016 KDB 971168 D01 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ......................: KIDS SMART WATCH Trade Mark ....................................... : ROADTRIP Manufacturer .................................... : SHENZHEN SHENGYE TECHNOLOGY CO., LTD Model/Type reference ....................... : VK59 Listed Models ............................. : VK59LB, VK59P, VK26, VK39, VK55, VK26, VD36, VM11, VD42, VD38, VD91, VK63, VK68, VK72, VK75, VK79, VD45, VD48, VD52, VD95, VM15, VM18, VM21 Ratings ............................................. : Input: DC 5V 0.35A Modulation ....................................... : QPSK, 16QAM Frequency ......................................... : E-UTRA Band 2 Result................................................ : PASS Report No.: CTA26052902203 Page 2 of 23 TEST REPORT Equipment under Test : KIDS SMART WATCH Model /Type : VK59 Listed Models : VK59LB, VK59P, VK26, VK39, VK55, VK26, VD36, VM11, VD42, VD38, VD91, VK63, VK68, VK72, VK75, VK79, VD45, VD48, VD52, VD95, VM15, VM18, VM21 Model Difference : The PCB board, circuit, structure and internal of these models are the same, only model number and colour are different for these models. So the tests were performed on model VK59 and the test results for the main test model can cover the listed models. Applicant : SHENZHEN SHENGYE TECHNOLOGY CO., LTD Address : 5th Floor, Building B, Chanfukechuang Building, Shanshui 2nd Road, Yuanshan Subdistrict, Longgang District, Shenzhen, China Manufacturer : SHENZHEN SHENGYE TECHNOLOGY CO., LTD Address : 5th Floor, Building B, Chanfukechuang Building, Shanshui 2nd Road, Yuanshan Subdistrict, Longgang District, Shenzhen, China Test result Pass * * In the configuration tested, the EUT complied with the standards specified page 4. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26052902203 Page 3 of 23 Contents 1 SUMMARY ................................................................................................................................. 4 TEST STANDARDS ............................................................................ 4 Test Description .................................................................................. 4 Address of the test laboratory ............................................................. 4 Test Facility ......................................................................................... 4 Statement of the measurement uncertainty ......................................... 5 2 GENERAL INFORMATION ......................................................................................................... 6 Environmental conditions .................................................................... 6 General Description of EUT ................................................................ 6 Description of Test Modes and Test Frequency ................................... 6 Equipments Used during the Test ........................................................ 7 Related Submittal(s) / Grant (s) ........................................................... 9 Modifications ....................................................................................... 9 3 TEST CONDITIONS AND RESULTS ........................................................................................ 10 Output Power .................................................................................... 10 Peak-to-Average Ratio (PAR)............................................................ 14 Occupied Bandwidth and Emission Bandwidth.................................. 15 Band Edge compliance ..................................................................... 16 Spurious Emission ............................................................................ 17 Frequency Stability under Temperature & Voltage Variations ............ 20 4 Test Setup Photos of the EUT .................................................................................................. 22 5 Photos of the EUT .................................................................................................................... 23 Report No.: C…

Text truncated - open the document above for the full version.

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China TEST REPORT FCC Part 22 Subpart H / Part 24 Subpart E Report Reference No. .....................: FCC ID. .............................................: CTA26052902202 2BFV9-VK59 Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue ..................................... : Jul. 27, 2026 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : SHENZHEN SHENGYE TECHNOLOGY CO., LTD Address ............................................ : 5th Floor, Building B, Chanfukechuang Building, Shanshui 2nd Road, Yuanshan Subdistrict, Longgang District, Shenzhen, China Test specification ........................... : Standard ........................................... : FCC CFR Title 47 Part 2, Part 22H, Part 24E ANSI/TIA-603-E-2016 KDB 971168 D01 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ......................: KIDS SMART WATCH Trade Mark ....................................... : ROADTRIP Manufacturer .................................... : SHENZHEN SHENGYE TECHNOLOGY CO., LTD Model/Type reference ....................... : VK59 Listed Models ............................. : VK59LB, VK59P, VK26, VK39, VK55, VK26, VD36, VM11, VD42, VD38, VD91, VK63, VK68, VK72, VK75, VK79, VD45, VD48, VD52, VD95, VM15, VM18, VM21 Ratings ............................................. : Input: DC 5V 0.35A Modulation ....................................... : QPSK Frequency ......................................... : UMTS Band II, UMTS Band IV, UMTS Band V Result................................................ : PASS Report No.: CTA26052902202 Page 2 of 24 T E S T R E P O R T Equipment under Test : KIDS SMART WATCH Model /Type : VK59 Listed Models : VK59LB, VK59P, VK26, VK39, VK55, VK26, VD36, VM11, VD42, VD38, VD91, VK63, VK68, VK72, VK75, VK79, VD45, VD48, VD52, VD95, VM15, VM18, VM21 Model difference : The PCB board, circuit, structure and internal of these models are the same, only model number and colour are different for these models. So the tests were performed on model VK59 and the test results for the main test model can cover the listed models. Applicant : SHENZHEN SHENGYE TECHNOLOGY CO., LTD Address : 5th Floor, Building B, Chanfukechuang Building, Shanshui 2nd Road, Yuanshan Subdistrict, Longgang District, Shenzhen, China Manufacturer : SHENZHEN SHENGYE TECHNOLOGY CO., LTD Address : 5th Floor, Building B, Chanfukechuang Building, Shanshui 2nd Road, Yuanshan Subdistrict, Longgang District, Shenzhen, China Test result Pass * * In the configuration tested, the EUT complied with the standards specified page 4. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26052902202 Page 3 of 24 Contents 1 SUMMARY ................................................................................................................................. 4 TEST STANDARDS ......................................................................................................... 4 Test Description ................................................................................................................ 4 Address of the test laboratory ........................................................................................... 4 Test Facility ...................................................................................................................... 4 Statement of the measurement uncertainty ...................................................................... 5 2 GENERAL INFORMATION ......................................................................................................... 6 Environmental conditions ................................................................................................. 6 General Description of EUT .............................................................................................. 6 Description of Test Modes and Test Frequency ................................................................ 7 Equipments Used during the Test ..................................................................................... 8 Related Submittal(s) / Grant (s) ...................................................................................... 10 Modifications .................................................................................................................. 10 3 TEST CONDITIONS AND RESULTS ........................................................................................ 11 Output Power ................................................................................................................. 11 Occupied Bandwidth ...................................................................................................... 14 Band Edge compliance .................................................................................................. 15 Spurious Emission ...................................................…

Text truncated - open the document above for the full version.

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China FCC PART 22/24 TEST REPORT FCC Part 22 /Part 24 Report Reference No. .....................: FCC ID. .......................................…

Text truncated - open the document above for the full version.