2BFXQ-TC113in1Wireless Charging Station

1 x 三合一无线充电器 1 x USB-C充电线 1 x 说明书 3合一无线充电器 用户手册 型号：TC11 感谢您购买三合一磁吸无线充电器。 为了获得最佳使用体验，请在使用前仔细阅读本用户手册，并将其 保存以供进一步参考。 兼容性注意事项 1.此充电器与任何支持Qi标准无线充电的智能手机、TWS 耳机和 iWatch手表兼容。 2.确保您的设备已启用Qi无线充电或具有与Qi兼容的无线接收器 （不包括接收器）。 3.为了获得最佳性能，请使用设备附带的原装充电适配器和USB-C 充电线。 4.想要使用充电器的磁吸功能，您的智能手机必须具有内置的磁吸 功能，或者是兼容的磁吸外壳。 5.这款充电器的手表模块专门设计用于为iWatch型号9/8/7/6/5/4/3 进行无线充电。 1.只能将设备用于预期用途。 2.将设备放在婴儿和儿童够不到的地方。 3.只能在室内和干燥区域使用设备。避免易燃、易爆、过热、潮湿 或油腻的环境。 4.请勿在强磁性环境中使用或放置设备。 5.确保没有物体阻挡充电器周围的气流，以防止过热。 6.避免跌落、撞击或对充电器施加过大的力。如果您发现严重肿胀 或变形。 7.不要试图自己拆卸设备。清洁前，请务必将设备从墙上的插座上拔下。 8.通过直接拉动插头而不是充电线来断开连接。 9.将设备储存在-20°C（-4°F）和60°C（140°F）之间，以确保其长期 有效性。 10.切勿将产品扔进冰箱。请按照当地电子废物法规处理该设备。 11。如果您遇到任何产品问题，请停止维修并联系售后客服以获得支持。 重要安全说明 一般注意事项 1.无线充电器与起搏器或植入式除颤器等医疗设备之间保持安全距离， 以避免磁干扰。如果您有顾虑，请咨询医疗保健提供者。 2.防止将信用卡、磁卡等放在无线充电器附近，以免数据丢失或损坏。 3.让金属物体远离无线充电器，以降低意外连接或短路的风险。 1.手机充电区 2.TWS耳机充电区 3.手表充电区 4.LED指示灯 5.USB-C充电端口 6.手表充电模块的USB-C端口 7.手表充电模块的存放插槽 产品概述 1.使用适配器将无线充电站连接到电源。 2.将您的设备（Phone/TWS/iWatch）放在相应的充电区域 开始充电。 磁铁安全注意事项 6 7 1 3 2 4 5 如何使用 规格 模型 输入 输出 感应距离 转换效率 尺寸 工作温度 TC11 9V-2A/12V-1.5A 20°- 50°C 这3个LED指示灯将根据手机、手表和耳机的充电状态而变化。 手机 手表 耳机 开机 蓝灯闪烁3秒蓝灯闪烁3秒蓝灯闪烁3秒 待机 关灯关灯关灯 充电 蓝色打开1分 钟后关闭 蓝色打开1分 钟后关闭 蓝色打开1分 钟后关闭 完成 蓝灯常亮查看手机查看手机 FOD和错误 蓝灯闪烁蓝灯闪烁蓝灯闪烁 指示灯指南 包装内容 FCCRequirement Anychangesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecould voidtheuser ’ sauthoritytooperatetheequipment. ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwo conditions: (1)thisdevicemaynotcauseharmfulinterference,and (2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause undesiredoperation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

2024-7-29

Product Specifications sheet Specification No.202404019001 Effective date2024/4/19 Customer Name:蓝钛思 Product Model耳机无线充线圈（Earphone wireless charging coil） DZ Part No. TX-DZ43.505.300.65-K6.5-L30（double-slotting） Customer item No TC11 【 □ New issue , □ version revision】 【 This specification includes contents and 7 pages in total 】 【 RoHS Compliant Parts 】 organizeCheckApproval 钟建立 Zhong jianli / 马湘平 Ma xiangping Guang Dong Top Wiser Electronic Technology Co., Ltd Factory address:Address; 1F, 1231 Yingbin Avenue, Longmen County , Huizhou City, Guangdong Province Tel: 13147097490 【Within 30 days after the customer receives this acknowledgement, please return it with your signature and seal. If it is overdue, it will be deemed that the production will be carried out according to the standards of this acknowledgement】. 【customer approval】 Date: Recognition status: □ full recognition □ conditional recognition □ refusal Approval Review Recheck Check remark: √ √ Product Specifications sheet Customer Name:蓝钛思 item TC11 DZ Part No. TX-DZ43.505.300.65-K6.5-L30（double-slotting） Specification No. 202404019001 Issue/Revision History VersionEffective dateChange content / reasonApproval 012024/4/19 New specification release钟建立Zhong Jianli organizecheckapproval 钟建立Zhong Jianli / 马湘平 Ma XiangPing Product Specifications sheet Customer Name:蓝钛思 Customer item No TC11 DZ Part No TX-DZ43.505.300.65-K6.5-L30（double-slotting） Specification No.202404019001 Version 01 ♦、Overall dimensions (unit: mm) A5.2 ±0.5 B20.0 ±1.0 C38.5 ±1.5 D43.5 ±1.0 E43.0 ±1.0 F30.0 ±2.0 G3.0 ±2.0 I0.65 ±0.2 （ Magnetic sheet） H1.70 ±0.4 (1)Wire diameter: 0.08 * 24P*2P enameled wire (2)Number of windings: 10TS (3)Whether the starting and ending lines cross: Yes (4)The coil and magnetic sheet shall be pasted in the center (5)Coil wrapped with 4mm high temperature adhesive tape (6) Disc back 42 rounds white glue ♦、Electrical characteristics:: parameterspecificationTest conditionsTest instrument L06.5±10%μH100KHz/1V■TH1816B Q>20 min100KHz/1V■TH1816B DCR<80mΩ@ 25 °C ■CH-502BC ♦、Temperature class: Operating temperature -40°C~ 125°C ♦、list of materials: Item Product Name Material specification SupplierRemark 1Magnetic sheet 43.5*5.3*0.65T开双槽（double- slotting） PC40 2 Copper wire0.08*24*2Penameled wire 3 High temperature adhesive tape 棕色4MMROHS 4 tin107HROHS 5 Double-sided tape 42 rounds white glue ROHS 6 glueYellow gumROHS organizecheckapproval 钟建立 Zhong Jianli/马湘平Ma Xiangping

Product Specifications sheet Specification No.202404021001 Effective date2024/4/21 Customer Name:蓝钛思 Product Model25 Watch coil DZ Part No. DZ-RC25-K8.0-L5MM Customer item No 【 □ New issue , □ version revision】 【 This specification includes contents and 7 pages in total 】 【 RoHS Compliant Parts 】 organizeCheckApproval 钟建立 Zhong jianli / 马湘平 Ma xiangping Guang Dong Top Wiser Electronic Technology Co., Ltd Factory address:Address; 1F, 1231 Yingbin Avenue, Longmen County , Huizhou City, Guangdong Province Tel: 13147097490 【Within 30 days after the customer receives this acknowledgement, please return it with your signature and seal. If it is overdue, it will be deemed that the production will be carried out according to the standards of this acknowledgement】. 【customer approval】 Date: Recognition status: □ full recognition □ conditional recognition □ refusal Approval Review Recheck Check remark: √ √ Product Specifications sheet Customer Name:蓝钛思 item DZ Part No. DZ-RC25-K8.0-L5MM Specification No. 202404021001 Issue/Revision History VersionEffective dateChange content / reasonApproval 012024/4/21 New specification release钟建立Zhong Jianli organizecheckapproval 钟建立Zhong Jianli / 马湘平 Ma XiangPing Product Specifications sheet Customer Name:蓝钛思 Customer item No DZ Part No DZ-RC25-K8.0-L5MMSpecification No.202404021001 Version 01 ♦、Overall dimensions (unit: mm) A7.6 ±1.0 B14.0 ±1.0 C21.0 ±1.0 D25.0 ±1.0 E9.7 ±1.0 K 5.0-2 H2.60 ±0.3(Film thickness） (1)Wire diameter: 0.08 * 24Stranded wire Single-wire double-layer winding (2)Number of windings: 14TS (3)Whether the starting and ending lines cross: Yes (4)Glue the bottom (5)Placed in the middle of the coil N52-7.5*2.2 strong magnetic,2800-- 3200GS ♦、Electrical characteristics:: parameterspecificationTest conditionsTest instrument L08±10%μH100KHz/1V■TH1816B Q>20 min100KHz/1V■TH1816B DCR<200mΩ@ 25°C■CH-502BC ♦、Temperature class: Operating temperature -40°C~ 125°C ♦、list of materials: Item Product Name Material specification SupplierRemark 1Magnetic sheet 25*2.6硬磁（Hard magnetic） PC40 2 Copper wire0.08*24Penameled wire 3 glueDouble-sided tapeROHS 4 tin107HROHS 5 N52 strong magnetic 7.5*2.2 ROHS 6 glueYellow gumROHS organizecheckapproval 钟建立 Zhong Jianli/马湘平Ma Xiangping

Externalphotos

Internalphotos ANT_watch ANT_Phone&Headset

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 RFExposureEvaluationReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlytothesample(s) tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.: CQASZ20240400681E-02 Applicant:ShenzhenTanchengTechnologyCo.,Ltd AddressofApplicant:Room302,BuildingG,SouthChinaScienceandTechnologyPark,No.3014 BanxuegangAvenue,BantianStreet,LonggangDistrict,Shenzhen EquipmentUnderTest(EUT): Product:3in1WirelessChargingStation ModelNo.:TC11 TestModelNo.:TC11 BrandName:N/A FCCID: 2BFXQ-TC11 Standards:47CFRPart1.1307 47CFRPart1.1310 KDB680106D01RFExposureWirelessChargingBaseAppv04r01 DateofReceipt:2024-4-19 DateofTest:2024-4-19to2024-7-25 DateofIssue: 2024-7-29 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove TestedBy: (JoeWang) ReviewedBy: (TimoLei) ApprovedBy: (AlexWang) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240400681E-02 Page:2of12 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20240400681E-02Rev.01 Initialreport 2024-7-29 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240400681E-02 Page:3of12 2Contents Page 1VERSION............................................................................................................................................................................2 2CONTENTS........................................................................................................................................................................3 ..................................................................................................................................................................................................3 3GENERALINFORMATION..............................................................................................................................................4 3.1CLIENTINFORMATION...................................................................................................................................................4 3.2GENERALDESCRIPTIONOFEUT...................................................................................................................................4 3.3NPRODUCTSPECIFICATIONSUBJECTIVETOTHISSTANDARD........................................................................................4 3.4TESTENVIRONMENT......................................................................................................................................................5 3.5DESCRIPTIONOFSUPPORTUNITS..................................................................................................................................5 3.6TESTLOCATION.............................................................................................................................................................6 3.7TESTFACILITY...............................................................................................................................................................6 3.8EQUIPMENTLIST............................................................................................................................................................6 4RFEXPOSUREEVALUATION.......................................................................................................................................7 4.1RFEXPOSURECOMPLIANCEREQUIREMENT.................................................................................................................7 4.1.1Limits....................................................................................................................................................................7 4.1.2TestProcedure...................................................................................................................................................7 4.1.3TestSetup...........................................................................................................................................................8 4.1.4TestResults........................................................................................................................................................8 4.1.5TestResults......................................................................................................................................................10 APPENDIXA:PHOTOGRAPHSOFTESTSETUP.....................................................................................................12 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240400681E-02 Page:4of12 3GeneralInformation 3.1ClientInformation Applicant:ShenzhenTanchengTechnologyCo.,Ltd AddressofApplicant:Room302,BuildingG,SouthChinaScienceandTechnologyPark,No.3014 BanxuegangAvenue,BantianStreet,LonggangDistrict,Shenzhen Manufacturer:ShenzhenTanchengTechnologyCo.,Ltd AddressofManufacturer:Room302,BuildingG,SouthChinaScienceandTechnologyPark,No.3014 BanxuegangAvenue,BantianStreet,LonggangDistrict,Shenzhen Factory:ShenzhenTanchengTechnologyCo.,Ltd AddressofFactory:Room302,BuildingG,SouthChinaScienceandTechnologyPark,No.3014 BanxuegangAvenue,BantianStreet,LonggangDistrict,Shenzhen 3.2GeneralDescriptionofEUT ProductName: 3in1WirelessChargingStation ModelNo.: TC11 TestModelNo.: TC11 BrandName: N/A SoftwareVersion: V1.0 HardwareVersion:V1.0 EUTPowerSupply: DC9V2A/12V1.5A 3.3NProductSpecificationsubjectivetothisstandard EquipmentCategory:Non-ISMfrequency OperationFrequencyrange:115kHz~205kHz,315kHz~330kHz ModulationType:Induction AntennaType:Inductioncoil AntennaGain:0dBi KeeptheEUTphoneWireless15WOutPut+forEarphone3W+forWatch 5W23W(TotalMAX) Note: 1.Insection15.31(m),regardstotheoperatingfrequencyrangeless1MH…

Text truncated - open the document above for the full version.

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 TestReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonly tothesample(s)tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.:CQASZ20240400681E-01 Applicant:ShenzhenTanchengTechnologyCo.,Ltd AddressofApplicant:Room302,BuildingG,SouthChinaScienceandTechnologyPark,No.3014 BanxuegangAvenue,BantianStreet,LonggangDistrict,Shenzhen EquipmentUnderTest(EUT): Product:3in1WirelessChargingStation ModelNo.:TC11 TestModelNo.:TC11 BrandName:N/A FCCID: 2BFXQ-TC11 Standards:47CFRPart15,SubpartC DateofReceipt:2024-4-19 DateofTest:2024-4-19to2024-7-25 DateofIssue: 2024-7-29 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove TestedBy: (JoeWang) ReviewedBy: (TimoLei) ApprovedBy: (AlexWang) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240400681E-01 Page: 2 of 30 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20240400681E- 01 Rev.01 Initialreport 2024-7-29 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240400681E-01 Page: 3 of 30 2TestSummary TestItemTestRequirementTestmethodResult AntennaRequirement 47CFRPart15,SubpartCSection 15.203 ANSIC63.102013PASS ACPowerLine Conducted Emission 47CFRPart15,SubpartCSection 15.207 ANSIC63.102013PASS 20dBOccupied Bandwidth 47CFRPart15,SubpartCSection 15.215 ANSIC63.102013PASS RadiatedEmission, RadiatedSpurious Emissions 47CFRPart15,SubpartCSection 15.209 ANSIC63.102013PASS ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240400681E-01 Page: 4 of 30 3Contents Page 1VERSION..........................................................................................................................................................................2 2TESTSUMMARY............................................................................................................................................................3 3CONTENTS......................................................................................................................................................................4 4GENERALINFORMATION...........................................................................................................................................5 4.1CLIENTINFORMATION.................................................................................................................................................5 4.2GENERALDESCRIPTIONOFEUT.................................................................................................................................5 4.3PRODUCTSPECIFICATIONSUBJECTIVETOTHISSTANDARD........................................................................................5 4.4TESTENVIRONMENT...................................................................................................................................................6 4.5DESCRIPTIONOFSUPPORTUNITS...............................................................................................................................6 4.6STATEMENTOFTHEMEASUREMENTUNCERTAINTY....................................................................................................7 4.7TESTLOCATION..........................................................................................................................................................7 4.8TESTFACILITY............................................................................................................................................................7 4.9DEVIATIONFROMSTANDARDS....................................................................................................................................7 4.10OTHERINFORMATIONREQUESTEDBYTHECUSTOMER............................................................................................7 4.11EQUIPMENTLIST.......................................................................................................................................................8 5TESTRESULTSANDMEASUREMENTDATA.......................................................................................................9 5.1ANTENNAREQUIREMENT............................................................................................................................................9 5.2CONDUCTEDEMISSIONS............................................................................................................................................10 5.320DBOCCUPYBANDWIDTH......................................................................................................................................14 5.4RADIATEDSPURIOUSEMISSION&RESTRICTEDBANDS...........................................................................................16 5.4.1SpuriousEmissions......................................................................................................................................16 6PHOTOGRAPHS-EUTTESTSETUP.....................................................................................................................22 6.1RADIATEDEMISSION.................................................................................................................................................22 6.2CONDUCTEDEMISSION............................................................................................................................................23 7PHOTOGRAPHS-EUTCONSTRUCTIONALDETAILS......................................................................................24 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240400681E-01 Page: 5 of 30 4GeneralInformation 4.1ClientInformation Applicant:ShenzhenTanchengTechnologyCo.,Ltd AddressofApplicant:Room302,Bui…

Text truncated - open the document above for the full version.

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240400681E-01 Page: 28 of 30 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240400681E-01 Page: 29 of 30 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20240400681E-01 Page: 30 of 30 ***ENDOFREROPT***

Setupphotos 1Photographs-EUTTestSetup 1.1RadiatedEmission 9kHz~30MHz: 30MHz~1GHz: 1.2ConductedEmission