2BG2R-RC1Remote conrol

FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

guangdonghuayijidiankejiyouxiangongsi FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 6/29/24 U.S.AgentDesignation guangdonghuayijidiankejiyouxiangongsiacknowledgestheirconsentforthefollowingcontactlocatedinthe UnitedStatestoactastheiragentforserviceofprocessfortheequipmentforwhichauthorizationissought(FCC ID:2BG2R-RC1): NameandcompanyofU.S.agent:UUXGROUPINC PhysicalU.S.addressofagent:36South18thAvenue,SuiteABrighton,COUSA80601 FRNofU.S.agent:0033701590 EmailaddressofU.S.agent:[email protected] UUXGROUPINCacknowledgestheirobligationtoacceptserviceofprocessonbehalfof guangdonghuayijidiankejiyouxiangongsi. guangdonghuayijidiankejiyouxiangongsiwiththeFRN0035568203acceptsitsobligationtomaintainanagent forserviceofprocessintheUnitedStatesfornolessthanoneyearaftereitherthegranteehaspermanently terminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S.,ortheconclusionofany Commission-relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheverislater. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirementslistedunder§ 2.911(d)(7). TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB 986446D01. Anexpirationdateforthisletterdoesnotexist.IncasetheU.S.agentchanges,thegranteeisobligatedtonotify theFCCwithin30daysviathegrantingTCB. Sincerely, Signature RongLan Manager guangdonghuayijidiankejiyouxiangongsi Signature JackFu Manager UUXGROUPINC 4 8 _ [ m o d e l ] U S _ A g e n t _ 2 . 9 1 1 ( d ) ( 7 ) - U , V 0 5

Page1of4FCCID:2BG2R-RC1 DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. ExternalPhotos Photo1 Photo2 Page2of4FCCID:2BG2R-RC1 DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo3 Photo4 Page3of4FCCID:2BG2R-RC1 DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo5 Photo6 Page4of4FCCID:2BG2R-RC1 DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo7 ------End------

Label FCCID:2BG2R-RC1

Page1of4FCCID:2BG2R-RC1 DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. InternalPhotos Photo1 Photo2 Page2of4FCCID:2BG2R-RC1 DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo3 Photo4 Page3of4FCCID:2BG2R-RC1 DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo5 Photo6 Page4of4FCCID:2BG2R-RC1 DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. Photo7 ------End------ Antenna

RFExposureevaluation FCCID:2BG2R-RC1 1.1.ApplicableStandard Accordingto§1.1307(b)(1),systemsoperatingundertheprovisionsofthissectionshallbeoperatedina mannerthatensuresthatthepublicisnotexposedtoradiofrequencyenergylevelinexcessofthe Commission’sguidelines. Accordingto§1.1310and§2.1093RFexposurerequirement KDB447498v06:MobileandPortableDevicesRFExposureProceduresandEquipmentAuthorization Policies 1.2.Requirement AccordingtoKDB447498D01GeneralRFExposureGuidancev06Section4.3.1StandaloneSARtest exclusionconsiderations:“UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures, standalone1-gheadorbodyand10-gextremitySARevaluationforgeneralpopulationexposureconditions, bymeasurementornumericalsimulation,isnotrequiredwhenthecorrespondingSARTestExclusion Thresholdcondition,listedbelow,issatisfied.Thesetestexclusionconditionsarebasedonsource-based time-averagedmaximumconductedoutputpoweroftheRFchannelrequiringevaluation,adjustedfortune-up tolerance,andtheminimumtestseparationdistancerequiredfortheexposureconditions.22Theminimum testseparationdistanceisdeterminedbythesmallestdistancefromtheantennaandradiatingstructuresor outersurfaceofthedevice,accordingtothehostformfactor,exposureconditionsandplatformrequirements, toanypartofthebodyorextremityofauserorbystander(see5)ofsection4.1).ToqualifyforSARtest exclusion,thetestseparationdistancesappliedmustbefullyexplainedandjustifiedbytheoperating configurationsandexposureconditionsofthetransmitterandapplicablehostplatformrequirements,typically intheSARmeasurementorSARanalysisreport,accordingtotherequiredpublishedRFexposureKDB procedures.WhennootherRFexposuretestingorreportingisrequired,astatementofjustificationand compliancemustbeincludedintheequipmentapproval,inlieuoftheSARreport,toqualifyfortheSARtest exclusion.Whenrequired,thedevicespecificconditionsdescribedintheotherpublishedRFexposureKDB proceduresmustbesatisfiedbeforeapplyingtheseSARtestexclusionprovisions;forexample,handheldPTT two-wayradios,handsets,laptops&tabletsetc.23“ [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance,mm)]·[√f(GHz)] ≤ 3.0for1-gSARand ≤ 7.5for10-gextremitySAR,where: • f(GHz)istheRFchanneltransmitfrequencyinGHz •PoweranddistanceareroundedtothenearestmWandmmbeforecalculation •Theresultisroundedtoonedecimalplaceforcomparison • 3.0and7.5arereferredtoasthenumericthresholdsinthestep2below Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis≤50mmandfor transmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtestseparationdistanceis<5 mm,adistanceof5mmaccordingto5)insection4.1isappliedtodetermineSARtestexclusion. 1.3.Manufacturingtolerance Freq. (MHz) Field strength(max)(dBuV/m) EIRP(max) (dBm) Turn-upPower (dBm) Tolerance± (dB) 433.92MHz84.77-10.49-10.0 ±1 Note: EIRP=E-104.8+20logD,D=3 Page2of2 2.EvaluationResult EvaluationResults Band/Mode Antenna Distance (mm) Max.RFoutputpower (includingtune-up tolerance) SARTest Exclusion Threshold SARTest Exclusion dBmmW 433.92MHz 5 -100.090.03<3 Yes 3.Conclusion ThemeasurementresultscomplywiththeFCCLimitper47CFR2.1093fortheuncontrolledRFExposure andSARExclusionThresholdperKDB447498v06 .....................EndofReport.........................

Page 1 of 32 ReportNo.:AIT24061218W1 DongguanYaxu(AiT)TechnologyLimited No.22,JinqianlingThirdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. TestReport ClientInformation: Applicant:guangdonghuayijidiankejiyouxiangongsi Applicantadd.:guangdongdongguanshinanchengjiedaozhonglilu86hao3dong228shi ProductInformation: ProductName:Remoteconrol ModelNo.:RC1,RCXX BrandName:N/A FCCID:2BG2R-RC1 Standards: FCC47CFRPART15SUBPARTC15.231 PreparedBy: DongguanYaxu(AiT)TechnologyLimited Add.:No.22,JinqianlingThirdStreet,Jitigang,Huangjiang,Dongguan, Guangdong,China DateofReceipt:June12,2024DateofTest:June12,2024~June16,2024 DateofIssue:June17,2024TestResult:Pass ThisdevicedescribedabovehasbeentestedbyDongguanYaxu(AiT)TechnologyLimited,andthe testresultsshowthattheequipmentundertest(EUT)isincompliancewiththeFCCrequirements.And itisapplicableonlytothetestedsampleidentifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofDongguanYaxu(AiT) TechnologyLimited. Reviewedby:Approvedby: EmiyaLinSimbaHuang Page 2 of 32 ReportNo.:AIT24061218W1 DongguanYaxu(AiT)TechnologyLimited No.22,JinqianlingThirdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. 1Contents Page COVERPAGE 1CONTENTS........................................................................................................................................................................2 2TESTSUMMARY...............................................................................................................................................................4 2.1STATEMENTOFTHEMEASUREMENTUNCERTAINTY........................................................................................................4 2.2MEASUREMENTUNCERTAINTY.......................................................................................................................................4 3TESTFACILITY.................................................................................................................................................................5 3.1DEVIATIONFROMSTANDARD..........................................................................................................................................5 3.2ABNORMALITIESFROMSTANDARDCONDITIONS..............................................................................................................5 3.3TESTLOCATION............................................................................................................................................................5 4GENERALINFORMATION...............................................................................................................................................6 4.1GENERALDESCRIPTIONOFEUT...................................................................................................................................6 5DESCRIPTIONOFTESTCONDITIONS...........................................................................................................................8 5.1E.U.T.OPERATION.......................................................................................................................................................8 5.2EUTPERIPHERALLIST..................................................................................................................................................9 5.3TESTPERIPHERALLIST.................................................................................................................................................9 6EQUIPMENTSLISTFORALLTESTITEMS..................................................................................................................10 7TESTRESULT.................................................................................................................................................................12 7.1ANTENNAREQUIREMENT.............................................................................................................................................12 7.2TRANSMITTIME...........................................................................................................................................................13 7.2.1Appliedprocedures/Limit.................................................................................................................................13 7.2.2Testprocedure..................................................................................................................................................13 7.2.3Deviationfromstandard....................................................................................................................................13 7.2.4Testsetup..........................................................................................................................................................13 7.2.5Testresults........................................................................................................................................................14 7.3FIELDSTRENGTHOFFUNDAMENTAL&FIELDSTRENGTHOFUNWANTEDEMISSIONS.....................................................15 7.3.1Testprocedure..................................................................................................................................................19 7.4OCCUPIEDBANDWIDTH&BANDEDGE.........................................................................................................................27 7.5CONDUCTEDEMISSIONSATMAINSTERMINALS150KHZTO30MHZ...........................................................................29 7.5.1TestResult.........................................................................................................................................................31 8PHOTOGRAPHS.............................................................................................................................................................32 8.1RADIATEDEMISSIONTESTSETUP..............................................................…

Text truncated - open the document above for the full version.

ANTENNA SPECIFICATON 1.Summary ITEM ANT SPEC Model Name 433M ANT Antenna plate PCB antenna Frequency range 433.92MHz MAX.Gain 0dBi Polarization Vertical 50 OhImpedancem Length 40mm and Width 22mm X-Z Plane Y-Z Plane X-Y Plane

Page1of1FCCID : 2BG2R-RC1 DongguanYaxu(AiT)TechnologyLimited No.22,Jinqianling3rdStreet,Jitigang, Huangjiang,Dongguan,Guangdong,China. TestSetupPhoto RadiatedEmission ------End------