2BG362000XG63MFSC- 2000X Single module continuous Fiber Laser Series

MFSC 2000X(G6.3) CW Fiber Laser Series Maxphotonics Co.,Ltd. Copyright Notation Copyright © Maxphotonics Co ., Ltd ( here after referred to as Maxphotonics). All rights reserved. You may not copy, modify, transmit or publish this publication, in any form, in any media or by any means, without the prior written permission of Maxphotonics, except as allowed under applicable copyright laws. Permitted copies shall bear the same copyright and proprietary notices that were contained on the ori ginal version. Maxphotonics believes that the information provided is accurate and reliable; however Maxphotonics makes no warranty, representation,expression or implication that this document can be used as reference in other occasions. Furthermore, Maxphotonics does not assume responsibility for any infringement of patents or other rights of third parties due to use of the information contained in this document. Maxphotonics shall not be liable for errors contained in this document or for direct or indirect damages of relevant equipment. Maxphotonics and the Maxphotonics Logo are registered trademarks of Maxphotonics Co., Ltd., and the Logo does not break any regulations of Trademark law.Maxphotonics grants no rights for patent or other intellectual property mentioned herein. All information contained in this document is subject to change and revision without notice. Subject to change without notice. Maxphotonics Co.,Ltd. Address: Maxphotonics Industrial Park, 3rd Furong Road, Furong Industrial Area, Shajing, Baoan, Shenzhen, China.518125 E-Mail: [email protected] http://en.maxphotonics.com 3 Preface Thank you for using the MFMC Series CW fiber laser from Maxphotonics. We compile this document for you in order that the laser is used and maintained properly. Due to the limited level of the writers, coupled with time constraints, there are some careless mistakes in this document, your understanding and suggestion to help us make an improvement will be much appreciated . Thank you again for using Maxphotonics' products. Please take time to read and understand this User's Guide and familiarize yourself with the operating and maintenance instructions before you use the product. We strongly recommend that the operator read the Section 2 titled “Safety Information” prior to operating the product. This User's Guide should stay with the product to provide you and all future users and owners of the product with important operating, safety and other information. We identify the parts to which you need to pay special attention in the document with underscore. Please notice those information to prevent the unnecessary damages. 4 Company Profile Found in 2004, Maxphotonics is one of the first fiber laser manufacturers in China. It is also the first in China to realize independent intellectual property rights and vertical integration in the core technologies of fiber lasers and optical devices. One of the national high-tech enterprises. Maxphotonics has developed into an internationally renowned laser manufacturer that develops, manufactures and sells fiber lasers and core optical components. It is the second largest domestic fiber laser manufacturer in the domestic market. Maxphotonics specializes in the research, development, production and sales of fiber lasers, including pulsed fiber lasers, continuous fiber lasers and direct diode lasers. It also implements pump sources, combiners, fiber gratings, isolators, laser output heads, and stripping. Optical devices such as molds, acousto-optic modulators, and pattern matchers are produced autonomously. Products are widely used in marking, engraving, cutting, drilling, cladding, welding, surface treatment, rapid prototyping and additive manufacturing processes. More informations ， please visit our website ： http://en.maxphotonics.com CONTENT 5 Company Profile ...........................................................................4 Chapter 1 Characteristic Description .........................................7 Chapter 2 General Safety Information .........................................8 1-Safety Conventions .....................................................................8 2-Laser Protection ..........................................................................9 3-Reference Standard ..................................................................10 4-General Safety Instructions .......................................................11 5-Additional Safety Information .....................................................16 Chapter 3 Product Description ..................................................17 1-Features ....................................................................................17 2-Module Configuration ................................................................17 3-Laser Model Designation Codes ................................................18 4-Certification ...............................................................................18 5-Front Panel Description .............................................................18 6-Back Panel Description .............................................................19 7-Optical Output Terminal .............................................................20 Chapter 4 Specification ..............................................................21 1-Optical Characteristic Parameters .............................................21 2-General Characteristic Parameters ............................................22 3-Water Cooling Condition ............................................................22 4-QBH Water Cooling Condition ...................................................23 5-Installation Environment Requirements ......................................24 CONTENT 6 6-Structural Layout .......................................................................26 Chapter 5 Disassembly Guide ....................................................28 1-Disassembly Step .....................…

Text truncated - open the document above for the full version.

· Maxphotonlcs Co., Lid. TO: U.S. Agent Designation for Service of Process ( Applic ant and U.S. Agent are Separate Partle雹） Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 2昭6 ' · . ｀\ · ｀ 卜 ， ·, 八 '` ' \ I \ i叭） ， i ！ I ` f, • ·' ， ＇， ； ； 5'； ?( -'• , ,\'°!<1 '1 -'nl'/i•， ／ 0\ 1.心 ， ｀1 · \\ \ ATTENTION:· FCC Certification心的ction2.911(d)(7) Info伽印on f ` J ．． ， ＼ 4· ｀ ,t'r` ,” 勹 ． I ｀ ` `` ) Q I ．＇ ,. ,＇ l. 、l ` I． �爹 P砰ign叭e d UTS, A q en t Company Name: United Consulting Technology Services Co., Ltd. FRN: 0033495714 Contact Name: David Wu Street Address: 17800 CASTLETON ST STE 665 CITY OF INDUSTRY CA 91748 United States Telephone No: (626) 217-4022 Email: [email protected] This letter is to confirm that we ("the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911 (d)(7) on behalf of the Applicant �.Q但dbelow..,；1\.， I}） ` ＼t\ \, · 、 r \} i `， A t， } I-＼ " 1 )· \ A ! 3 3 U.S. Agent Signature: Date: 2025/12/5 Signed by (Printed NamefTltle): David Wu/CEO The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company nan:ie;, t,,1axp�9tonics Co. I Ltd , . ' : FRN: 0035576263 ·\ · } 3 儿） ． Grante�;_Code! ·2BG36 '） , J ， I I . FCC ID: 2BG362000XG63 Contact Name: Bilan Wu Street Address: Maxphotonics Industrial Park, Third Furong Road Furong Industrial Area, Shajing Town City/Province/Zip: BaoAn District, Shenzhen, Guangdong, NIA, 518125 Telephone No: 1598676'8606 Email: [email protected] 、 ｀， . r ｀ , 1 .. ｀． 、 ＇ I 八＾ L ， ＇ ．．． ＇． I J'· 1· 、 ， • I 八 ＂＇ 八J r. `I I 、八 ;， 0 ,A C. ｀ ｀ I I 、， 八 ` ，` 、 b I I l , ｀ 勹I Applicant Sig 广 nature: 祝 A WV Date: 2025/1215 Signed by (P.rinted Nameffitle): Bilan•wu·, Outreach director

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 1 of 4 Appendix External Photos for GZCR2510001638MD SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 4 of 4 - End of the Appendix -

PANTONE Black C 材质色（25#哑 银龙防伪） 制造商: 深圳市创鑫激光股份有限公司 地址: 深圳市宝安区沙井芙蓉工业区 芙蓉三路创鑫激光产业园 型号: MFSC- 2000X-BJW6.3 CMIIT ID: FCC ID:2BG362000XG63 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1）this device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation. 65.00 mm 25.00 mm ---- Mx13485 1 : 1 技术要求: 1.所印内容符合图纸要求,无错印,漏印等不良现象; 2.丝印清晰，位置准确，无断线、毛边、模糊等不良; .按: 图纸制作；3 1 1 25#哑银⻰防伪 名称 蓝牙认证& FCC ID标签（中 英文） 特殊参数： MAX;2000X-6.3 首次发布 V1.0 V1.0

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 1 of 6 Appendix Internal Photos for GZCR2510001638MD SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 2 of 6 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 3 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 4 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 5 of 6 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 6 of 6 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251000163803 Page: 1 of 10 FCC ID: 2BG362000XG63 RF EXPOSURE EVALUATION REPORT Application No.: GZCR2510001638MD Applicant:Maxphotonics Co., Ltd. Address of Applicant:Maxphotonics Industrial Park, Third Furong Road Furong Industrial Area, Shajing Town, BaoAn District Shenzhen, Guangdong, China. Manufacturer:Maxphotonics Co., Ltd. Address of Manufacturer:Maxphotonics Industrial Park, Third Furong Road Furong Industrial Area, Shajing Town, BaoAn District Shenzhen, Guangdong, China. Factory:1) Maxphotonics Co., Ltd. 2) Suzhou Maxphotonics Co., Ltd. 3) Shenzhen Maxphotonics Co., Ltd. Address of Factory:1) Maxphotonics Industrial Park, Third Furong Road Furong Industrial Area, Shajing Town, BaoAn District Shenzhen, Guangdong, China. 2) No. 88, Changtai Road, Huangdai Town, Xiangcheng District, Suzhou City, P.R. China 3) Building A, No. 84 Xinyu Road, Xinqiao Street, Baoan District, Shenzhen City, P.R. China Product Name:MFSC- 2000X Single module continuous Fiber Laser Series Model No.: MFSC-2000X-BJW6.3, MFSC-####*-**W*** ¤ ¤Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: , , , , Standard(s) : KDB447498 D01 V06 Date of Receipt: 2025-10-23 Date of Evaluation: 2025-11-05 Date of Issue: 2025-11-14 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251000163803 Page: 2 of 10 Revision Record VersionReport No.DateRemark 01GZCR2510001638032025-11-14Original Authorized for issue by: Kevin Zhang/Project Engineer Approved By Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251000163803 Page: 3 of 10 2Evaluation Summary ItemStandardMethodRequirementResult RF Exposure KDB 447498 D01 V06 KDB 447498 D01 V0647 CFR Part 1.1310Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. ¤ Declaration of EUT Family Grouping: Model No.: MFSC-2000X-BJW6.3, MFSC-####*-**W*** According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on model name, power, current and appearance. More details are shown in the below table. Therefore only one model MFSC-2000X-BJW6.3 was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251000163803 Page: 4 of 10 1234567891011 MFSC-####**-B*W6.3 Code F Code SC CodeCurrent(A) 100012 150018.5 200028 300012.5 600032 Code H, M, X, C, W, W_Pro Plus, HW S_Cooling, Code (W), (C), (HMB) Code A B C D E F G H Code A B C D E F G H I J K L M X Code A C W Code 1 to 99 Code 0 to 99 Changes in appearance, color, handle, etc. Optical path design and software operation, etc. Company Fiber Laser Code/Power Air-Cooling Self Cooling Water-cooling Kind Kind 20M 25M 30M Other Cooling 4.0M 5.0M 10M 12M 15M 1.5M 1.9M 2.0M 2.5M 3.0M LOE QD Bare fiber D80 Cable Length Output type Collimator isolator QBH QCS SMA-905 3000 6000 Characteristic Application direction Blank space Characteristic Application direction Single-module CW Power （ W ） 1000 1500 2000 MFSC-2000* MFSC-2000**-B*W6.3 Kind Fiber laser Application Characte ristic Applicatio n direction / Output type Cable Length W Optical path design and software operation, etc. / Changes in appearance, color, handle, etc. Model ： SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251000163803 Page: 5 of 10 3Contents Page 1Cover Page...............................................................................................................................................1 2Evaluation Summary................................................................................................................................3 3Contents....................................................................................................................................................5 4General Information.................................................................................................................................6 4.1Details of E.U.T.................................................................................................................................6 4.2Evaluating Location...........................................................................................................................6 4.3Facility...............................................................................................................................................7 4.4Deviation from Standards..................................................................................................................7 4.5Abnormalities from Standard Conditions...........................................................................................7 5Technical Requirements Specification..................................................................................................8 5.1General Description of Applied Standards........................................................................................8 5.2RF Exposure Evaluation....................................................................................................................8 5.2.1Limit & Test Method......................................................................................................................8 5.2.2Conclusion....................................................................................................................................9 6EUT Constructional Details (EUT Photos).....................…

Text truncated - open the document above for the full version.

2024-07-30 2024-07-30 13:37:28 MX146 45 2024-07-30 13:39:24

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.0 Report No.: GZCR251000163802 Page: 1 of 66 FCC ID: 2BG362000XG63 TEST REPORT Application No.: GZCR2510001638MD Applicant: Maxphotonics Co., Ltd. Address of Applicant: Maxphotonics Industrial Park, Third Furong Road Furong Industrial Area, Shajing Town, BaoAn District Shenzhen, Guangdong, China. Manufacturer: Maxphotonics Co., Ltd. Address of Manufacturer: Maxphotonics Industrial Park, Third Furong Road Furong Industrial Area, Shajing Town, BaoAn District Shenzhen, Guangdong, China. Factory: 1) Maxphotonics Co., Ltd. 2) Suzhou Maxphotonics Co., Ltd. 3) Shenzhen Maxphotonics Co., Ltd. Address of Factory: 1) Maxphotonics Industrial Park, Third Furong Road Furong Industrial Area, Shajing Town, BaoAn District Shenzhen, Guangdong, China. 2) No. 88, Changtai Road, Huangdai Town, Xiangcheng District, Suzhou City, P.R. China 3) Building A, No. 84 Xinyu Road, Xinqiao Street, Baoan District, Shenzhen City, P.R. China Product Name: MFSC- 2000X Single module continuous Fiber Laser Series Model No.: MFSC-2000X-BJW6.3, MFSC-####*-**W*** ¤ ¤ Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: , , , , Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2025-10-23 Date of Test: 2025-11-04 to 2025-11-06 Date of Issue: 2025-11-14 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.0 Report No.: GZCR251000163802 Page: 2 of 66 Revision Record Version Report No. Date Remark 01 GZCR251000163802 2025-11-14 Original Authorized for issue by: Kevin Zhang/Project Engineer Approved By Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.0 Report No.: GZCR251000163802 Page: 3 of 66 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.2 47 CFR Part 15, Subpart C 15.207 Radiated Emissions which fall in the restricted bands ANSI C63.10 (2020) Section 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Conducted Peak Output Power ANSI C63.10 (2020) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2020) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2020) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. ¤ Declaration of EUT Family Grouping: Model No.: MFSC-2000X-BJW6.3, MFSC-####*-**W*** According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on model name, power, current and appearance. More details as below table shown. Therefore only one model MFSC-2000X-BJW6.3 was tested in this report. Pass SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.0 Report No.: GZCR251000163802 Page: 4 of 66 1234567891011 MFSC-####**-B*W6.3 Code F Code SC CodeCurrent(A) 100012 150018.5 200028 300012.5 600032 Code H, M, X, C, W, W_Pro Plus, HW S_Cooling, Code (W), (C), (HMB) Code A B C D E F G H Code A B C D E F G H I J K L M X Code A C W Code 1 to 99 Code 0 to 99 Changes in appearance, color, handle, etc. Optical path design and software operation, etc. Company Fiber Laser Code/Power Air-Cooling Self Cooling Water-cooling Kind Kind 20M 25M 30M Other Cooling 4.0M 5.0M 10M 12M 15M 1.5M 1.9M 2.0M 2.5M 3.0M LOE QD Bare fiber D80 Cable Length Output type Collimator isolator QBH QCS SMA-905 3000 6000 Characteristic Application direction Blank space Characteristic Application direction Single-module CW Power（W） 1000 1500 2000 MFSC-2000* MFSC-2000**-B*W 6.3 Kind Fiber laser Application Characte ristic Applicatio n direction / Output type Cable Length W Optical path design and software operation, etc. / Changes in appearance, color, handle, etc. Model： SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.0 Report No.: GZCR251000163802 Page: 5 of 66 3 Contents Page 1 Cover Page ................................................................................................................................................. 1 2 Test Summary ............................................................................................................................................ 3 3 Contents ..................................................................................................................................................... 5 4 General Information ................................................................................................................................... 7 4.1 Details of E.U.T. .................................................................................................................................. 7 4.2 Description of Support Units .........................................................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 1 of 5 Appendix Test Setup Photo for GZCR251000163802 Test Model No.: MFSC-2000X-BJW6.3 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 2 of 5 Test Setup Photo Conducted Emissions at AC Power Line (150kHz-30MHz) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 3 of 5 Radiated Spurious Emissions Below 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 5 of 5 Radiated Spurious Emissions Above 1GHz & Radiated Emissions which fall in the restricted bands - End of the Appendix -