2BG62-PABLOXF40Drone

Applicant Declaration QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name PABLO AIR Co., Ltd. Address 5F, 82, Venture-ro, Yeonsu-gu, Incheon, Republic of Korea FRN 0035597251 Grantee Code 2BG62 FCC ID 2BG62-PABLOXF40 Authorized Contact Name Yoon Jun Han Contact Email [email protected] Contact Phone +82-70-5222-6968 I , the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in ac cordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made i n t his application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c )if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensur e t hat production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept t hat they are the responsibl e par ty and agree to abide by t heir r esponsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements . (1 ) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. S ee 47C FR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has r ead, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions . Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List PABLO AIR Co.,Ltd. (“ the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. PABLO AIR Co.,Ltd. ( “the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: July 12, 2024 Print Name: Yoon Jun Han Title: Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

PABLO AIR Co., Ltd. 5F, 82, Venture-ro, Yeonsu-gu, Incheon, Republic of Korea Date : July 12, 2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 LETTER FOR AUTHORIZATION To whom it may concern: I, the undersigned, hereby authorize SGS Korea Co., Ltd. and hereafter referred to as SGS Korea, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by SGS Korea Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing SGS Korea as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; PABLO AIR Co., Ltd. 5F, 82, Venture-ro, Yeonsu-gu, Incheon, Republic of Korea f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) t ake appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) doc ument the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours Name : Yoon Jun Han Title : Manager Company Name : PABLO AIR Co., Ltd.

July 12, 2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 REQUEST FOR CONFIDENTIALITY FCC ID: 2BG62-PABLOXF40 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, PABLO AIR Co., Ltd., hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade se crets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short‐Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04‐1705. This provision will give PABLO AIR Co., Ltd. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows: CONFIDENTIAL LIST Permanent 1 Block Diagram 2 Operational Descriptions 3 Schematics Short‐Term 4 External Photos 5 Internal Photos 6 Test‐Setup Photos 7 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely Yours, Name : Yoon Jun Han Title : Manager Company Name : PABLO AIR Co., Ltd. PABLO AIR Co., Ltd. 5F, 82, Venture-ro, Yeonsu-gu, Incheon, Republic of Korea

u-blox AG Zuercherstrasse 68, Thalwil 8800, Switzerland Jul. 23, 2024 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Regarding consent to use FCC approved materials FCC ID: XPYANNAB4 Model: ANNA-B4 To Whom It May Concern: u-blox AG approve PABLO AIR Co.,Ltd. to use the FCC certification documentation of ANNA-B4 for their ceritification process. Sincerely, u-blox AG Zuercherstrasse 68, Thalwil 8800, Switzerland

深圳市海凌科电子有限公司 ShenzhenHi-LinkElectronicCo.,Ltd 17F,BuildingE,XingheWORLD,MinleCommunity,Minzhi,Longhua,Shenzhen,China TEL:8675523152658-831FAX:8675583575189 Date:4 th July2024 ShenzhenHi-LinkElectronicCo.,Ltd.approvePABLOAIRCo.,Ltd.touse theFCCcertificationdocumentationofHLK-RM58Sfortheircertification process. BonnieZheng 17F,BuildingE,XingheWORLD,MinleCommunity,Minzhi,Longhua,Shenzhen,China 深圳市龙华区民治街道民乐社区星河WORLDE栋大厦17层

LABEL INFORMATION Bottom of battery chamber

FCC ID: 2BG62-PABLOXF40 According to KDB 447498 D04 Interim General RF Exposure Guidance v01 1. MPE-Based Exemption An alternative to the SAR-based exemption is provided in § 1.1307(b)(3)(i)(C), for a much wider frequency range, from 300 ㎑ to 100 ㎓, applicable for separation distances greater or equal to λ/2π, where λ is the free- space operating wavelength in meters. The MPE-based test exemption condition is in terms of ERP, defined as the product of the maximum antenna gain and the delivered maximum time-averaged power. For this case, a RF source is an RF exempt device if its ERP (watts) is no more than a frequency-dependent value, as detailed tabular form in Appendix B. These limits have been derived based on the basic specifications on Maximum Permissible Exposure (MPE) considered for the FCC rules in § 1.1310(e)(1). Table 1 to 1.1307(b)(3)(i)(c) – Single RF Sources Subject to Routine Environmental Evaluation RF Source Frequency (㎒) Threshold ERP (watts) 0.3-1.34 1 920 R2 1.34-30 3 450 R 2 /f 2 30-300 3.83 R 2 300-1 500 0.012 8 R 2 f 1 500-100 000 19.2 R 2 2. RF Exposure Test Exemptions for Single Source Mode Port Frequency Range (㎒) Minimum Separation Distance (㎝) Maximum Average Target Power (㏈m) Maximum Tune up (㏈) Antenna Gain (㏈i) ERP Threshold ERP (㎽) Ratio Result (㏈m) (㎽) Bluetooth Low Energy 1 2 402 ~ 2 480 20 7.00 2.00 3.50 10.35 10.84 768 0.001 Pass WLAN2 2 2 412 ~ 2 462 20 15.00 3.00 -3.25 12.60 18.20 768 0.024 Pass WLAN5 2 5 745 ~ 5 825 20 13.00 3.00 2.67 16.52 44.88 768 0.058 Pass Note ; - ERP(㏈m) = Maximum average target power(㏈m) + Maximum Tune up(㏈) + Antenna gain(㏈i) - 2.15 (㏈). - Maximum average target power is the manufacturer’s declared rated power. - WLAN and Bluetooth Low Energy can’t simultaneous transmission at the same time. 3. Conclusion: No SAR is required.

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description ANNA-B4 Model Name ANNA-B402 Series Model ANNA-B412 FCC ID XPYANNAB4 2. EVALUATION METHOD According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. Where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 3. CALCULATION BLE 1M: P t =6.844dBm=4.83mW The value of the Maximum output power Pt is referred to the test report of the CFR47 § 15.247. The result for RF exposure evaluation SAR=(4.83mW / 5mm).[√2.480GHz)]=1.52<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. BLE 2M: P t =6.829dBm=4.81mW The value of the Maximum output power P t is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(4.81mW / 5mm).[√2.480GHz)]=1.51<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. 2.4G: P t =7.333dBm=5.41mW The value of the Maximum output power P t is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(5.41mW / 5mm).[√2.480GHz)]=1.70<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. O-QPSK: P t =7.335dBm=5.41mW The value of the Maximum output power P t is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(5.41mW / 5mm).[√2.475GHz)]=1.70<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. 4. CONCLUSION The SAR evaluation is not required.

1. MAXIMUM PERMISSIBLE EXPOSURE (MPE) 1.1 General Information Client Information Applicant: ShenZhen HaiLingKe Electronic co.,Ltd Address of applicant: 3F Caiyue Mansion,No.24 Liuxian blvd,LongHua District, Shenzhen, Guangdong, China Manufacturer: ShenZhen HaiLingKe Electronic co.,Ltd Address of manufacturer: 3F Caiyue Mansion,No.24 Liuxian blvd,LongHua District, Shenzhen, Guangdong, China General Description of EUT: Product Name: WIFI module Trade Name: HI-LINK Model No.: HLK-RM58S Adding Model(s): / FCC ID: 2AD56HLK-RM58S Rated Voltage: DC 5V Technical Characteristics of EUT: Wi-Fi (2.4G) Support Standards: 802.11b, 802.11g, 802.11n Frequency Range: 2412-2462MHz for 802.11b/g/n-HT20 2422-2452MHz for 802.11n-HT40 RF Output Power: 15.44dBm (Conducted) Type of Modulation: DBPSK,BPSK,DQPSK,QPSK,16QAM,64QAM Data Rate: 1-11Mbps, 6-54Mbps, up to 150Mbps Quantity of Channels: 11 for 802.11b/g/n-HT20 7 for 802.11n-HT40 Channel Separation: 5MHz Type of Antenna: Integral Antenna Antenna Gain: 3.13dBi Wi-Fi (5G) Support Standards: 802.11a, 802.11n(HT20) , 802.11n-HT40, 802.11ac-VH80 Frequency Range: 5150-5250MHz, 5250-5350MHz, 5470-5725MHz, 5725-5850MHz RF Output Power: 13.04dBm (Conducted) Type of Modulation: BPSK, QPSK,16QAM,64QAM, 256QAM Data Rate: 6-54Mbps, up to 200Mbps Type of Antenna: Integral Antenna Antenna Gain: 3.73dBi 1.2 Standard Applicable According to §1.1307(b)(1) and KDB 447498 D01 General RF Exposure Guidance v06, system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. (a) Limits for Occupational / Controlled Exposure Frequency range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times | E | 2 , | H | 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 / / F/300 6 1500-100000 / / 5 6 (b) Limits for General Population / Uncontrolled Exposure Frequency range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Times | E | 2 , | H | 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 / / F/1500 30 1500-100000 / / 1 30 Note: f = frequency in MHz: * = Plane-wave equivalents power density 1.3 MPE Calculation Method S = (30*P*G) / (377*R 2 ) S = power density (in appropriate units, e.g., mw/cm 2 ) P = power input to the antenna (in appropriate units, e.g., mw) G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor is normally numeric gain. R = distance to the center of radiation of the antenna (in appropriate units, e.g., cm) 1.4 MPE Calculation Result For 2.4G Wi-Fi Maximum Tune-Up output power: 18(dBm) Maximum peak output power at antenna input terminal: 63.10 (mW) Prediction distance: >20(cm) Prediction frequency: 2412(MHz) Antenna gain: 3.13(dBi) Directional gain (numeric gain): 2.06 The worst case is power density at prediction frequency at 20cm: 0.0258(mw/cm 2 ) MPE limit for general population exposure at prediction frequency: 1 (mw/cm 2 ) For 5G Wi-Fi Maximum Tune-Up output power: 17 (dBm) Maximum peak output power at antenna input terminal: 50.12(mW) Prediction distance: >20(cm) Prediction frequency: 5240 (MHz) Antenna gain:3.73(dBi) Directional gain (numeric gain): 2.36 The worst case is power density at prediction frequency at 20cm: 0.0235(mw/cm 2 ) MPE limit for general population exposure at prediction frequency: 1 (mw/cm 2 ) Result: Pass

Model name: PabloX F40 Item Contents Antenna Type Wire Antenna Antenna peak gain Bluetooth Low Energy 3.50 ㏈i WIFI 2 400 ~ 2483.5 MHz: -3.25 ㏈i 5 725 ~ 5 850 MHz: 2.67 ㏈i Manufacturer / Model name Bluetooth Low Energy SHENZHEN TUKO TECHNOLOGY CO.,LTD. / UFL/IPEX-BT ANTENNA-RF1.13-38mm WIFI Huizhou FlyFish intelligence Technology Co., Ltd / Wire Antenna Address of manufacturer Bluetooth Low Energy 2 Floor, Plant 2, YouCheng Industry Area, Anlan Road, No.9, Guanlan Town, Longhua District, Shenzhen, China WIFI Room 404 NO.8,Huaan Road,High-tech Zone, Huizhou City, Guangdong.China Test Laboratory Bluetooth Low Energy SHENZHEN TUKO TECHNOLOGY CO.,LTD. WIFI Tellestar Co., Ltd. Bluetooth Low Energy Antenna Length 3.8 cm Bluetooth Low Energy Antenna Width 0.1 cm WIFI Antenna Length 15 cm WIFI Antenna Width 0.1 cm Antenna Information Model name: PabloX F40 Bluetooth Low Energy Ant. Length Width Length Width WIFI Ant.

SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL005232 Page: 2 of 28 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) INDEX Table of contents 1. General Information -------------------------------------------------------------------------------------- 3 2. Transmitter Radiated Spurious Emissions --------------------------------------------------------- 9 3. Maximum Peak Conducted Output Power --------------------------------------------------------- 25 4. Antenna Requirement ----------------------------------------------------------------------------------- 28 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL005232 Page: 3 of 28 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1. General Information 1.1. Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) - 10-2, LS-ro 182beon-gil , Gunpo-si, Gyeonggi-do, Korea, 15807 - 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 - Designation number: KR0150 All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Phone No. : +82 31 688 0901 Fax No. : +82 31 688 0921 1.2. Details of Applicant Applicant : PABLO AIR Co., Ltd. Address : 5F, 82, Venture-ro, Yeonsu-gu, Incheon, Republic of Korea, 22013 Contact Person : Yoon, Jun-han Phone No. : +82 70 5222 6968 1.3. Details of Manufacturer Company : PABLO AIR Co., Ltd. Address : 5F, 82, Venture-ro, Yeonsu-gu, Incheon, Republic of Korea, 22013 1.4. Description of EUT Kind of Product Drone Model Name PabloX F40 Approved Module FCC ID: XPYANNAB4 Variant Model Names - Serial Number 001 Power Supply DC 14.8 V Frequency Range 2 402 ㎒ ~ 2 480 ㎒ (Bluetooth Low Energy) Modulation Technique GFSK Number of Channels 40 channels (Bluetooth Low Energy) Antenna Type Wire Antenna Antenna Gain ※ 3.50 ㏈i H/W Version 4.0.1 S/W Version 1.0.1 FVIN N/A SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL005232 Page: 4 of 28 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1.5. Test Equipment List Equipment Manufacturer Model S/N Cal. Date Cal. Interval Cal. Due Signal Generator R&S SMA100B 106887 Oct. 06, 2023 Annual Oct. 06, 2024 Spectrum Analyzer R&S FSW8 101659 May 28, 2024 Annual May 28, 2025 Spectrum Analyzer Agilent N9020A MY53421758 Sep. 01, 2023 Annual Sep. 01, 2024 Attenuator AEROFLEX / INMET 40AH2W-6 3 Mar. 18, 2024 Annual Mar. 18, 2025 High Pass Filter Wainwright Instrument GmbH WHKX3.0/18G-10SS 21 Jun. 07, 2024 Annual Jun. 07, 2025 High Pass Filter Wainwright Instrument GmbH WHNX7.5/26.5G-6SS 15 Jun. 07, 2024 Annual Jun. 07, 2025 Low Pass Filter Mini-Circuits NLP-1200+ V 8979400903-1 May 17, 2024 Annual May 17, 2025 Power Sensor R&S NRP-Z81 100669 May 17, 2024 Annual May 17, 2025 DC Power Supply R&S HMP2020 022802107 Oct. 31, 2023 Annual Oct. 31, 2024 Preamplifier H.P. 8447F 2944A03909 Aug. 04, 2023 Annual Aug. 04, 2024 Signal Conditioning Unit R&S SCU-18F 101058 Dec. 07, 2023 Annual Dec. 07, 2024 Pre Amplifier MITEQ Inc. JS44-18004000-35-8P 1546891 Oct. 06, 2023 Annual Oct. 06, 2024 Loop Antenna Schwarzbeck Mess- Elektronik FMZB 1519 1519-039 Aug. 21, 2023 Biennial Aug. 21, 2025 Bilog Antenna Schwarzbeck Mess- Elektronik VULB 9163 9163-396 Apr. 02, 2024 Biennial Apr. 02, 2026 Horn Antenna R&S HF906 100326 Feb. 19, 2024 Annual Feb. 19, 2025 Horn Antenna Schwarzbeck Mess- Elektronik BBHA 9170 BBHA9170223 Oct. 10, 2023 Annual Oct. 10, 2024 EMI Test Receiver R&S ESU26 100109 Jan. 16, 2024 Annual Jan. 16, 2025 Turn Table Innco systems GmbH DS 1200 S N/A N.C.R. N/A N.C.R. Controller Innco systems GmbH CONTROLLER CO3000- 4P CO3000/963/383 30516/L N.C.R. N/A N.C.R. Antenna Mast Innco systems GmbH MA4640-XP-ET MA4640/536/383 30516/L N.C.R. N/A N.C.R. Anechoic Chamber SY Corporation L × W × H (9.6 m × 6.4 m × 6.6 m) N/A N.C.R. N/A N.C.R. Coaxial Cable SENSORVIEW NMST-13A26-NMST-5 m TPC2402190004 Apr. 03, 2024 Semi- Annual Oct. 03, 2024 Coaxial Cable SENSORVIEW NMST-13A26-NMST-10 m TPC2402190001 Apr. 03, 2024 Semi- Annual Oct. 03, 2024 Coaxial Cable RFONE PL360P-292M292M-1.5M- A 20200324002 Apr. 12, 2024 Semi- Annual Oct. 12, 2024 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL005232 Page: 5 of 28 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1.6. Summary of Test Results The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15 Subpart C Section in FCC Test Item(s) Result 15.205(a) 15.209 15.247(d) Transmitter Radiated Spurious Emissions and Conducted Spurious Emission Complied 1) 15.247(a)(2) 6 ㏈ Bandwidth Complied 1) 15.247(b)(3) Maximum Peak Conducted Output Power Complied 15.247(e) Power Spectral Density Complied 1) 15.207 AC Power Line Conducted Emission N/A 1) Note; 1) The EUT uses the approved module. Other test items were complied with module test report. - Module FCC ID: XPYANNAB4 - Test Laboratory: Attestaion of Global Compliance (Shenzhen) Co., Ltd - Test report number: AGC00174211202FE02 2) The AC power line test was not performed because the EUT use battery power for operation and which do not operate from the AC power lines. 1.7. Test Procedure(s) The measurement procedures described in the American National Standard of Procedure for Compliance Testing of unlicensed Wireless Devices (ANSI C63.10-2013) and the guidance provided in KDB 558074 D01 15.247 Meas Guidance v05r02 were used in the measurement of the DUT. 1.8. Sample Calculation Where relevant, the following sample calculation is provided: 1.8.1. Conducted Test Offset value (㏈) = Attenuator (㏈) + Cab…

Text truncated - open the document above for the full version.

Page 1 of 70 FCC Test Report Report No.: AGC00174211202FE02 FCC ID : XPYANNAB4 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : ANNA-B4 BRAND NAME : u-blox MODEL NAME : ANNA-B402, ANNA-B412 APPLICANT : u-blox AG DATE OF ISSUE : Mar. 11, 2022 STANDARD(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC00174211202FE02 Page 2 of 70 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 11, 2022 Valid Initial Release Report No.: AGC00174211202FE02 Page 3 of 70 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS ....................................................................................................... 6 2.3. RELATED SUBMITTAL(S)/GRANT(S) ....................................................................................................... 7 2.4. TEST METHODOLOGY ............................................................................................................................. 7 2.5. SPECIAL ACCESSORIES .......................................................................................................................... 7 2.6. EQUIPMENT MODIFICATIONS ................................................................................................................. 7 2.7. ANTENNA REQUIREMENT ....................................................................................................................... 7 2.8. DESCRIPTION OF AVAILABLE ANTENNAS ............................................................................................ 7 2.9. DESCRIPTION OF ANTENNA RF PORT................................................................................................... 8 3. MEASUREMENT UNCERTAINTY ................................................................................................................... 9 4. DESCRIPTION OF TEST MODES ................................................................................................................. 10 5. SYSTEM TEST CONFIGURATION ................................................................................................................. 11 5.1. CONFIGURATION OF TESTED SYSTEM ................................................................................................ 11 5.2. EQUIPMENT USED IN TESTED SYSTEM ............................................................................................... 11 5.3. SUMMARY OF TEST RESULTS ............................................................................................................... 11 6. TEST FACILITY .............................................................................................................................................. 12 7. PEAK OUTPUT POWER ................................................................................................................................ 13 7.1. MEASUREMENT PROCEDURE .............................................................................................................. 13 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 13 7.3. LIMITS AND MEASUREMENT RESULT .................................................................................................. 14 8. BANDWIDTH .................................................................................................................................................. 21 8.1. MEASUREMENT PROCEDURE .............................................................................................................. 21 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 21 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................... 21 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 34 9.1. MEASUREMENT PROCEDURE .............................................................................................................. 34 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 34 9.3. MEASUREMENT EQUIPMENT USED .................................................................................................... 34 Report No.: AGC00174211202FE02 Page 4 of 70 9.4. LIMITS AND MEASUREMENT RESULT .................................................................................................. 34 10. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY ........................................................ 46 10.1. MEASUREMENT PROCEDURE ............................................................................................................ 46 10.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................. 46 10.3. MEASUREMENT EQUIPMENT USED .................................................................................................. 46 10.4. LIMITS AND MEASUREMENT RESULT................................................................................................ 46 11. RADIATED EMISSION ................................................................................................................................. 50 11.1. MEASUREMENT PROCEDURE ............................................................................................................ 50 11.2. TEST SETUP ..............…

Text truncated - open the document above for the full version.

Report No.: AGC00174211202FE02 Page 36 of 70 Test_Graph_LE1M_ANT1_2402_1Mbps_Higher Band Emissions Test_Graph_LE1M_ANT1_2440_1Mbps_Reference Level Report No.: AGC00174211202FE02 Page 37 of 70 Test_Graph_LE1M_ANT1_2440_1Mbps_Lower Band Emissions Test_Graph_LE1M_ANT1_2440_1Mbps_Higher Band Emissions Report No.: AGC00174211202FE02 Page 38 of 70 Test_Graph_LE1M_ANT1_2480_1Mbps_Reference Level Test_Graph_LE1M_ANT1_2480_1Mbps_Lower Band Emissions Report No.: AGC00174211202FE02 Page 39 of 70 Test_Graph_LE1M_ANT1_2480_1Mbps_Higher Band Emissions Test_Graph_LE2M…

Text truncated - open the document above for the full version.