
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: UGK-LVM UNITED INC FRN: 0033476375 Contact Name: Jimmychen Address: 6547NAcademyBlvd#2266,ColoradoSprings,CO80918 Telephone No: 001-323-51 04660 Email: [email protected] Applicant: Company name: Shenzhen chuang jin heng electrionic technolog co., LTD Grantee code: 2BG8W FCC ID: 2BG8W-CS8268 FRN: 0035606185 Contact Name: Yanping Ke Address: 3# No. 1 Anquan Road, Xintang Industrial, Baishixia, Fuyong Town, Bao’an District, Shenzhen, China Telephone: 15915495516 Fax: 15915495516 E-mail: [email protected] [Shenzhen chuang jin heng electrionic technolog co., LTD] certifies that, as of the date of this filing of the application with the TCB, [UGK-LVM UNITED INC] is our designated US agent for service of process for the above referenced FCC ID. [Shenzhen chuang jin heng electrionic technolog co., LTD] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [UGK-LVM UNITED INC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2024/06/26 Applicant’s Name: Yanping Ke US Agent for Service of Process’s Name: Jimmychen Title: Manager Title: Manager Signature Signature
C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen chuang jin heng electrionic technolog co., LTD Grantee code: 2BG8W FCC ID: 2BG8W-CS8268 FRN: 0035606185 Contact Name: Yanping Ke Address: 3# No. 1 Anquan Road, Xintang Industrial, Baishixia, Fuyong Town, Bao’an District, Shenzhen, China Telephone: 15915495516 Fax: 15915495516 E-mail: [email protected] i. [Shenzhen chuang jin heng electrionic technolog co., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Shenzhen chuang jin heng electrionic technolog co., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Shenzhen chuang jin heng electrionic technolog co., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered List as an entity producing “covered”equipment . Date: 2024/06/26 Applicant’s Name: Yanping Ke Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist
Shenzhen chuang jin heng electrionic technolog co., LTD Product Similarity Declaration Company: Shenzhen chuang jin heng electrionic technolog co., LTD Address: 3# No. 1 Anquan Road, Xintang Industrial, Baishixia, Fuyong Town, Bao’an District, Shenzhen, China Product Name: Digital HDTV Antenna Model Number: ANT-CS8268 ANT-CS8018-8098, ANT-CS8118-8198, ANT-CS8218-8298, ANT-CS8318-8398, ANT- CS8418-8498, ANT-CS8518-8598, ANT-CS8618-8698, ANT-CS8718-8798, ANT-CS8818- 8898, ANT-CS8918-8998 FCC Identifier: 2BG8W-CS8268 We (Shenzhen chuang jin heng electrionic technolog co., LTD) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name and appearance color. Client’s signature Name: Yanping Ke Date: 2024/06/26 Title: Manager Signature of applicant:
Shenzhen chuang jin heng electrionic technolog co., LTD 1/1 Letter of Authorization Company: Shenzhen chuang jin heng electrionic technolog co., LTD Address: 3# No. 1 Anquan Road, Xintang Industrial, Baishixia, Fuyong Town, Bao’an District, Shenzhen, China Product Name: Digital HDTV Antenna Model Number: ANT-CS8268 ANT-CS8018-8098, ANT-CS8118-8198, ANT-CS8218-8298, ANT-CS8318-8398, ANT-CS8418- 8498, ANT-CS8518-8598, ANT-CS8618-8698, ANT-CS8718-8798, ANT-CS8818-8898, ANT- CS8918-8998 FCC Identifier: 2BG8W-CS8268 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Yanping Ke Date: 2024/06/26 Title: Manager Signature of applicant:
Shenzhen chuang jin heng electrionic technolog co., LTD 1/1 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024/06/26 Subject: Request for Confidentiality FCC ID: 2BG8W-CS8268 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual No ☐ Internal Photos No ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Yanping Ke Title: Manager Signature of applicant:
Shenzhen DL Testing Technology Co., Ltd. EUT PHOTO(External Photos) Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. ※※※※※ END OF REPORT ※※※※※
Size:16*8mm Model: ANT-CS8268 FCC ID: 2BG8W-CS8268 Label location
Shenzhen DL Testing Technology Co., Ltd. EUT PHOTO(Internal Photos) Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. ※※※※※ END OF REPORT ※※※※※
Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240614010ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 18 FCC TEST REPORT FCC ID: 2BG8W-CS8268 Applicant: Shenzhen chuang jin heng electrionic technolog co., LTD Address: 3# No. 1 Anquan Road, Xintang Industrial, Baishixia, Fuyong Town, Bao'an District, Shenzhen, China Manufacturer: Shenzhen chuang jin heng electrionic technolog co., LTD Address: 3# No. 1 Anquan Road, Xintang Industrial, Baishixia, Fuyong Town, Bao'an District, Shenzhen, China EUT: Digital HDTV Antenna Trade Mark: N/A Model Number: ANT-CS8268 ANT-CS8018-8098, ANT-CS8118-8198, ANT-CS8218-8298, ANT-CS8318-8398, ANT-CS8418-8498, ANT-CS8518-8598, ANT-CS8618-8698, ANT-CS8718-8798, ANT-CS8818-8898, ANT-CS8918-8998 Date of Receipt: Jun. 14, 2024 Test Date: Jun. 14, 2024 - Jul. 03, 2024 Date of Report: Jul. 03, 2024 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Building C, Shuanghuan, No.8, Baoqing Road, Baolong Industrial Zone, Baolong Street, Longgang District, Shenzhen, Guangdong, China Applicable Standards: FCC Part 15 Subpart B ANSI C63.4:2014 Test Result: Pass Report Number: DL-240614010ER Prepared (Test Engineer): Alisa Song Reviewer (Supervisor): Jack Bu Approved (Manager): Jade Yang This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240614010ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 18 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ....................................................................................................................................................... 3 2. TEST SUMMARY ......................................................................................................................................... 3 3. GENERAL INFORMATION ......................................................................................................................... 4 4. TEST INSTRUMENT USED ........................................................................................................................ 6 5. CONDUCTED EMISSION TEST ................................................................................................................ 7 6. RADIATION EMISSION TEST ................................................................................................................. 11 7. SETUP PHOTOGRAPHS .......................................................................................................................... 18 8. EUT PHOTOGRAPHS ............................................................................................................................... 18 Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240614010ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 18 1. VERSION Version No. Date Description 00 Jul. 03, 2024 Original 2. TEST SUMMARY EMC Emission Standard Test Item Limit Result Remark FCC PART 15 B Conducted Emission at power ports 15.107 Class B PASS Radiated Emission below 1GHz 15.109 Class B PASS Radiated Emission above 1GHz 15.109 Class B PASS Conducted Emission at antenna ports 15.111 Class B PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report (2) Test Facility: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Building C, Shuanghuan, No.8, Baoqing Road, Baolong Industrial Zone, Baolong Street, Longgang District, Shenzhen, Guangdong, China Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240614010ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 18 3. GENERAL INFORMATION 3.1 Description of Device (EUT) EUT: Digital HDTV Antenna Trade Mark: N/A Model Number: ANT-CS8268 ANT-CS8018-8098, ANT-CS8118-8198, ANT-CS8218-8298, ANT-CS8318-8398, ANT-CS8418-8498, ANT-CS8518-8598, ANT-CS8618-8698, ANT-CS8718-8798, ANT-CS8818-8898, ANT-CS8918-8998 Test Model: ANT-CS8268 Model difference: The product's different for model number and appearance color. Power Supply: DC 5V Working Frequency: Above 108MHz 3.2 Tested System Details None. 3.3 Block Diagram of Test Set-up Radiated Emission test set-up: Conducted Emission test set-up: 3.4 Test Mode Description Mode1. On Mode AC Mains TV EUT AC Mains Adapter EUT TV Set top box AC Mains AC Mains Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240614010ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 18 3.5 Test Auxiliary Equipment TV (Provide by test lab): Manufacturer: coocaa Model: Cooc1 I/P: AC 110-240V 50/60Hz AC Line: Unshielded, Undetachable 1.6m Adapter (Provide by test lab): Manufacturer: HAIWEI Model: HW-0501000E I/P: AC 100-240V 50/60Hz O/P: DC 5V 1A Set top box(Provide by test lab): Manufacturer: TP-LINK Model: TP-001 I/P: AC 110-240V 50/60Hz 3.6 Test Uncertainty Conducted Emission Uncertainty : ±2.56dB Radiated Emission Uncertainty : ±3.65dB Shenzhen DL Testing Technology Co., Ltd. Report No.: DL-240614010ER Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 6 of 18 4. TEST INSTRUMENT USED For Conducted Emission Test (843 Shielded Room) Equipment Manufacturer Model Serial Last Cal. Next Cal. 843 Shielded Room ChengYu 843 Room 843 Sep. 20, 2022 Sep. 19, 2025 EMI Receiver R&S ESR 101421 Nov. 04, 2023 Nov. 03, 2024 LISN R&S ENV216 102417 Nov. 04, 2023 Nov. 03, 2024 Clamp COM-POWER CLA-050 431071 Nov. 04, 2023 Nov. 03, 2024 3-Loop Antenna DAZE ZN30401 13021 Nov. 04, 2023 Nov. 03, 2024 ISN T8 Schwarzbeck NTFM 8158 101135 Nov. 04, 2023 Nov. 03, 2024 ISN T5 Schwarzbeck NTFM 8158 101136 Nov. 04, 2023 Nov. 03, 2024 843 Cable 1# ChengYu CE Cable 001 Nov. 04, 2023 Nov. 03, 2024 843 Cable 1# ChengYu CE Cable 002 Nov. 04, 2023 Nov. 03, 2024 For Radi…
Text truncated - open the document above for the full version.
产品规格书 specification 产品名称:室内电视天线 Product name: Indoor TV antenna 产品型号:ANT-CS8268(本公司型号) Product model: ANT-CS8268 (model of our company) 一、 产品图片(product picture) 二、包装图片(仅供参考)-Packaging Picture (for reference only) 三、产品尺寸(平板尺寸)239*141*13.2mm/Product size (plate size) 239*141*13.2mm 四、包装盒尺寸148x38x248mm,重量470g(含包装盒重量)。卡通箱尺寸:405x310x516mm(40PCS/箱), 毛重20kg。/Box size 148x38x248mm, weight 470g (including box weight). Cartoon box size: 405x310x516mm (40 PCS / box), gross weight of 20kg. 五、天线参数/Antenna parameters 1.Frequency:VHF(170-240Mhz)\ UHF(470-860Mhz) 2.VSWR:<=2.0:1 3.Impedence:75Ω 4.LNA gain:25dB 5. junctor:F male head 6.Wire rod: 1.5C-2V coaxial line. The antenna line is 4M long, and the amplifier line is 1 m long 7.Polarization:linear 8.voltage:DC5V 9.Power connector:USB 10.current consumption :30mA 11.service temperature:-45~85°C 12.storage temperature:-45~85°C 六、 性能及特点/Performance and characteristics 1.新一代平面设计室内电视天线。 2.方便多位置,如窗台,桌子,墙壁等。 3.采用优质同轴电缆,便于定位天线,找到最佳的电视信号接收。 4.特别适用于各种数字地面波信号(DVB-T,ISDB-T,DTMB,ATSC)和 /FM无线电。 1. New generation of graphic design of indoor TV antenna. 2. Convenient for multiple locations, such as windowsill, table, walls, etc. 3. Adopt high quality coaxial cable, easy to locate the antenna and find the best TV signal reception. 4. Especially suitable for various digital ground wave signals (DVB-T, ISDB-T, DTMB, ATSC) and / FM radios. 七、使用本产品注意事项/Notes for using this product 温馨提示:任何地区的无线电视信号的发射距离都是有一定限度的,高增益天线虽然专为无线电视而设计, 但在超过信号发射覆盖范围之外,再好的天线也无法收到。即使是在信号有效范围内,也可能因地形地势的 环境影响,比如高的建筑物或高山对信号的遮挡,都会影响接收效果。所以在无信号或者信号接收微弱的地 点,再好的天线都不能发挥作用,请顾客理解。 Tips: The transmission distance of radio view signal in any area has a certain limit. Although the high gain antenna is designed for radio vision, the best antenna exceeds the signal transmission coverage. Even within the effective range of the signal, the signal may be affected by the environment, such as high buildings or mountains, to affect the receiving effect. So in no signal or weak signal reception place, no matter how good the antenna can not play a role, please understand. 1.该天线只能接收本地免费地面数字信号。确保用户所在的地区有地面数字信号,否则此天线无用。 2.确保您的电视机有HDTV Tuner,如果没有,请建议您购买Digital Converter Box。 3.确保正确安装天线和放大器,参照连接图示。 4.天线安装位置尽量远离微波炉、空调风机等大功率电器设备,会干扰信号。 5.此天线仅在室内用,你可以把它放在桌子上、墙壁上、窗台上(强烈推荐)。 6.安装并连接好天线后,操作电视机遥控器,在电视机菜单中,选择“扫描”通道。这可能被称为“自动扫 描”,“自动程序”或“搜索频道“。查看电视机的详细使用说明。 7.如果接收节目数很少或是图像卡顿,尝试将天线调整方向和角度,然后再重新搜索节目。直到接收效果最 好为止,再将天线固定紧。 8.如果你住在信号塔附近,你不需要使用放大器来提升信号,使用放大器会使接待变得更糟,这样你就将放 大器上的开关拨向Short range。如果你住处比较偏僻,距离发射塔比较远,你可以将放大器上的开关拨向Long range。 1. The antenna can only receive local free ground digital signals. Make sure the user has ground digital signals in the area, otherwise the antenna is useless. 2. Make sure your TV has a HDTV Tuner, and if not, please suggest you buy a Digital Converter Box. 3. Ensure that the antenna and amplifier are installed correctly, and refer to the connection diagram. 4. The installation position of the antenna should be as far away from the high-power electrical equipment such as microwave oven and air conditioning fan as far as possible, which will disturb the signal. 5. This antenna is only used indoors, and you can put it on a table, on a wall, or on a windowsill (highly recommended). 6. After installing and connecting the antenna, operate the TV remote control and select the "Scan" channel in the TV menu. This may be called "autoscan," "autoprogram" or "search channel". Check out the detailed instructions for using the TV set. 7. If the number of programs is small or the image is stuck, try to adjust the direction and angle of the antenna, and then search the program again. Hold the antenna tight until the reception effect is the best. 8. If you live near the tower, you don't need to use an amplifier to lift the signal, using the amplifier will make the reception worse, so you dial the switch on the amplifier to the Short range. If your residence is relatively remote and far away from the launch tower, you can dial the switch on the amplifier to the Long range. Manufacturer: Shenzhen chuang jin heng electrionic technolog co., LTD Address: 3# No. 1 Anquan Road, Xintang Industrial, Baishixia, Fuyong Town, Bao'an District, Shenzhen, China
Shenzhen DL Testing Technology Co., Ltd. EUT TEST PHOTO Radiated Measurement Photos Shenzhen DL Testing Technology Co., Ltd. Conducted Measurement Photos ※※※※※ END OF REPORT ※※※※※
Shenzhen, Guangdong · China
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15B | - | - |