2BGA2-M5projector

user's manual LED projector Due to continuous improvement, the actual product may differ from the instruction manual, which is for reference only. security information 1. READ INSTRUCTIONS - Read all safety and operating instructions before operating the equipment. 2. Retain instructions - Safety and operating instructions should be retained for future reference. 3. ATTENTION TO WARNINGS - All warnings on the unit and in the operating instructions should be observed. 4. Water and Moisture - Do not use the appliance near water (e.g. bathtubs, sinks, swimming pools) or in humid places or tropical climates. Do not place objects containing liquids, such as vases, on top of the appliance. Do not subject the appliance to dripping or splashing. 5. Installation - The unit should only be placed on a stable, flat surface. Do not allow the unit to fall or be subjected to shock. 6. Wall or Ceiling Mounting - The unit should only be mounted to a wall or ceiling in accordance with the manufacturer's recommendations. 7. Ventilation - The appliance should be located so that its position or location does not interfere with its proper ventilation. For example, the appliance should not be placed on a bed, sofa, carpet or similar surface that could block the vents; or in a built- in unit, such as a bookcase or cupboard, that could obstruct the flow of air through the vents. Ensure that a distance of at least 5 centimeters is maintained around the appliance to allow for adequate ventilation. Cover the vents with newspaper, tablecloths, curtains, etc. to ensure that ventilation is not obstructed. 8. Heat - This equipment should be located away from heat sources such as radiators, heat registers, stoves, or other heat-producing equipment (including amplifiers). 9. Power Supply - The unit can only be connected to a power supply described in the operating instructions or of the type labeled on the unit. 10. Cables and Plugs - Power plugs should be kept easily accessible. All cables should be routed so that they cannot be stepped on or pinched by objects placed on or against them, with particular attention to plugs, wires at convenience receptacles, and points of egress from equipment. 11. Cleaning - The unit should be cleaned only according to the manufacturer's recommendations. Clean by wiping with a dry, clean cloth. Do not use chemical cleaners or detergents. Always unplug the appliance before cleaning. 12. When not in use - Unplug the power cord from the outlet when the unit is not in use for an extended period of time. 13. Entry of objects and liquids - Care should be taken so that objects are not dropped and liquids are not spilled into the enclosure through openings. 14. DAMAGE REQUIRING REPAIR - Equipment should be repaired by qualified service personnel if. a) Damaged power cord or plug. b) Objects dropped or liquids spilled into the equipment. c) Equipment has been rained on; and d) The device does not appear to be functioning properly or there is a noticeable change in performance; and e) The device has been dropped or the enclosure damaged. 15. MAINTENANCE - The user should not attempt to service the equipment beyond what is described in the operating instructions. All other repairs should be referred to qualified service personnel. 16. Open Flame - Keep the device away from open flames. Do not place an open flame source (e.g., a lighted candle) on the unit. 17. Thunderstorms - Unplug the unit during thunderstorms. 18. Safety Inspections - After repairs are made, technicians should conduct safety inspections to ensure that the equipment is working properly and safely. 19. Batteries - Always place batteries in electrical components with the correct polarity. Danger of explosion if battery is not replaced correctly. Replace only with the same or equivalent type. Do not mix old and new batteries. Be aware of the environmental aspects of battery disposal. Batteries should not be exposed to excessive heat, such as sunlight, fire, etc. Remove the battery before disposing of the product. 20. Volume - To prevent possible hearing damage, do not listen at high volumes for long periods of time. 21. Headphones (if applicable) - Excessive sound pressure from headphones and earphones can cause hearing loss. WARNING: To reduce the risk of electric shock, do not remove the cover (or back). There are no user-serviceable parts inside. Have it serviced by qualified service personnel. A lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of a dangerous uninsulated voltage within the product's enclosure, which may be strong enough to pose a risk of electric shock to a person. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit.Battery Batteries must not be disposed of as ordinary household waste. Every consumer is obliged to return batteries to a specialized disposal site. Disposal of used and end-of-life electrical and electronic equipment the meaning of the symbols on the product, its accessories or packaging indicates that the product must not be handled As household waste. Dispose of this equipment at an applicable electrical and electronic equipment waste collection point. By ensuring that this product is disposed of correctly, you will help to prevent potential hazards to the environment and human health that might otherwise result from improper waste disposal of this product. Recycling the material will help conserve natural resources. For more detailed information on recycling this product, please contact your local city office, household waste disposal service or the store where you purchased the product. With regard to the notes in this User's Manual 1. This instruction manual is published by the manufacturer without any warranty. Corrections and changes to this instruction manual may be made by t…

Text truncated - open the document above for the full version.

Moman Electronics (Shenzhen) Co., LTD Plant 202, No.5, Rongshu Road Industrial Zone Qiaotou Community, Fuhai Street Baoan District, Shenzhen China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-10-14 To whom it may concern: We, Moman Electronics (Shenzhen) Co., LTD, hereby certify that the equipment for which authorization is sought (FCC ID: 2BGA2-M5) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Wang Jin Hua Manager Moman Electronics (Shenzhen) Co., LTD 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V03

Moman Electronics (Shenzhen) Co., LTD Plant 202, No.5, Rongshu Road Industrial Zone Qiaotou Community, Fuhai Street Baoan District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024/10/12 U.S. Agent Designation Moman Electronics (Shenzhen) Co., LTD acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BGA2-M5): Name and company of U.S. agent: GSS SERVICE INC Physical U.S. address of agent: 6547 N Academy Blvd #2266 Colorado Springs COLORADO 80918 United States FRN of U.S. agent: 0033402082 Email address of U.S. agent: [email protected] GSS SERVICE INC acknowledges their obligation to accept service of process on behalf of Moman Electronics (Shenzhen) Co., LTD Moman Electronics (Shenzhen) Co., LTD with the FRN [0035400886] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Wang Jin Hua Manager Moman Electronics (Shenzhen) Co., LTD Signature Michoux Logan PM GSS SERVICE INC 48_[mo del] US_Agent_2.911(d)(7) - U, V0 5

Moman Electronics (Shenzhen) Co., LTD Add: Plant 202, No.5, Rongshu Road Industrial Zone Qiaotou Community, Fuhai Street Baoan District, Shenzhen China Date: 2024-10-14 FCC ID: 2BGA2-M5 Dear Sir/Madam, We, Moman Electronics (Shenzhen) Co., LTD Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: projector Model no.: M5, M1, M2, M3, M4, M6, M7, M8, M9, M10, M20, M30, M40, M50, M60,M70, M80, M90, M100, M200, M300, M400, M500, M600, M700, M800, M900, V1, V2, V3, V4, V5, V6, V7, V8, V9, V10, V20, V30, V40, V50, V60, V70, V80, V90, V100, V200, V300, V400, V500, V600, V700, V800, V900 Model M5 Moman Electronics (Shenzhen) Co., LTD Add: Plant 202, No.5, Rongshu Road Industrial Zone Qiaotou Community, Fuhai Street Baoan District, Shenzhen China M7 M1, M2, M3, M4, M6, M8, M9, M10, M20, M30, M40, M50, M60, M70, M80, M90 Moman Electronics (Shenzhen) Co., LTD Add: Plant 202, No.5, Rongshu Road Industrial Zone Qiaotou Community, Fuhai Street Baoan District, Shenzhen China M100, M200, M300, M400, M500, M600, M700, M800, M900 V1, V2, V3, V4, V5, V6, V7, V8, V9, V10, V20, V30, V40, V50, V60, V70, V80, V90, V100, V200, V300, V400, V500, V600, V700, V800, V900 Sincerely, Moman Electronics (Shenzhen) Co., LTD Add: Plant 202, No.5, Rongshu Road Industrial Zone Qiaotou Community, Fuhai Street Baoan District, Shenzhen China Name/Title： Wang Jin Hua/Manager Company: Moman Electronics (Shenzhen) Co., LTD Address: Plant 202, No.5, Rongshu Road Industrial Zone Qiaotou Community, Fuhai Street Baoan District, Shenzhen China Phone: 15112539206 Fax: N/A E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-10-14> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2BGA2-M5 M5 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Wang Jin Hua/Manager Company: Moman Electronics (Shenzhen) Co., LTD Address: Plant 202, No.5, Rongshu Road Industrial Zone Qiaotou Community, Fuhai Street Baoan District, Shenzhen China Phone: 15112539206 Fax: N/A E-Mail: [email protected]

Moman Electronics (Shenzhen) Co., LTD Plant 202, No.5, Rongshu Road Industrial Zone Qiaotou Community, Fuhai Street Baoan District, Shenzhen China Date: 2024-10-14 FCC ID: 2BGA2-M5 Model Number: M5 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Moman Electronics (Shenzhen) Co., LTD, declare that this EUT (FCC ID: 2BGA2-M5) doesn’t have Ad Hoc mode function on “non-US/Canada frequencies”. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title： Wang Jin Hua/Manager Company: Moman Electronics (Shenzhen) Co., LTD Address: Plant 202, No.5, Rongshu Road Industrial Zone Qiaotou Community, Fuhai Street Baoan District, Shenzhen China Phone: 15112539206 Fax: N/A E-Mail: [email protected]

Moman Electronics (Shenzhen) Co., LTD Plant 202, No.5, Rongshu Road Industrial Zone Qiaotou Community, Fuhai Street Baoan District, Shenzhen China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-10-14 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2BGA2-M5 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Wang Jin Hua/Manager Company: Moman Electronics (Shenzhen) Co., LTD Address: Plant 202, No.5, Rongshu Road Industrial Zone Qiaotou Community, Fuhai Street Baoan District, Shenzhen China Phone: 15112539206 Fax: N/A E-Mail: [email protected]

FCC ID: 2BGA2-M5 External Photos of the EUT M5 FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5 M7 FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5 M1, M2, M3, M4, M6, M8, M9, M10, M20, M30, M40, M50, M60, M70, M80, M90 FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5 M100, M200, M300, M400, M500, M600, M700, M800, M900 FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5 V1, V2, V3, V4, V5, V6, V7, V8, V9, V10, V20, V30, V40, V50, V60, V70, V80, V90, V100, V200, V300, V400, V500, V600, V700, V800, V900 FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5

Label and Location Size: L: 2.0cm*W: 1.0cm Label and Location FCC ID : 2BGA2-M5

FCC ID: 2BGA2-M5 Internal Photos of the EUT M5 FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5 ANT FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5 M7 FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5 ANT FCC ID: 2BGA2-M5 M1, M2, M3, M4, M6, M8, M9, M10, M20, M30, M40, M50, M60, M70, M80, M90 FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5 ANT FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5 M100, M200, M300, M400, M500, M600, M700, M800, M900 FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5 ANT FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5 V1, V2, V3, V4, V5, V6, V7, V8, V9, V10, V20, V30, V40, V50, V60, V70, V80, V90, V100, V200, V300, V400, V500, V600, V700, V800, V900 FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5 ANT FCC ID: 2BGA2-M5 FCC ID: 2BGA2-M5

RF Exposure evaluation FCC ID: 2BGA2-M5 Exposure category: General population/uncontrolled environment EUT Type: Production Unit Device Type: Mobile Device 1. Reference According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. KDB447498 D01: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 2. Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density 3. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 4. Antenna Information M5 can only use antennas certificated as follows provided by manufacturer; Antenna No. Model No. of antenna: Type of antenna: Gain of the antenna (Max.) Frequency range: 2.4GWIFI / Internal ANT 0.78dBi for 2400-2500MHz 5. Manufacturing Tolerance WIFI(Peak) Frequency (MHz) 11b 2412 2437 2462 Target (dBm) 14.0 14.0 14.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 11g 2412 2437 2462 Target (dBm) 13.0 13.0 13.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 11n(HT20) 2412 2437 2462 Target (dBm) 13.0 13.0 13.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 11n(HT40) 2422 2437 2452 Target (dBm) 13.0 13.0 13.0 Tolerance ± (dB) 1.0 1.0 1.0 6. Standalone MPE Result As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum EUT RF output power, the minimum separation distance, r =20cm, as well as the gain of the used antenna is 0.78dBi, the RF power density can be obtained. Modulation Type Output power Antenna Gain (dBi) Antenna Gain (linear) MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBm mW 2.4GWIFI 15.0 31.6228 0.78 1.1967 0.0075 1.0000 Remark: 1. Output power (Peak) including turn-up tolerance; 2. MPE evaluate distance is 20cm from user manual provide by manufacturer. 7. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. ----------------THE END OF REPORT---------------

1. Antenna Description: Antenna type PCB antenna Model M5 Frequency range 2400-2500MHz Manufacturer Moman Electronics (Shenzhen) Co., LTD ANT Peak Gain 0.78dBi 2. Antenna Photo: Length: 14.84mm Width: 5.22mm 3. Test Equipment & Conditions 3.1 Test instrument VSWR is tested using Agilent E5071B connected to a hand mechanism, and the status is free space. 3.2 Test environment and methods 4．Antenna Radiation Pattern 2400MHz 2450MHz 2500MHz

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. .................... : FCC ID. ........................................... : CTA24092700201 2BGA2-M5 Compiled by ( position+printed name+signature) . : File administrators Jinghua Xiao Supervised by ( position+printed name+signature) . : Project Engineer Xudong Zhang Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Sep. 28, 2024 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ........................... : Moman Electronics (Shenzhen) Co., LTD Address ............................................ : Plant 202, No.5, Rongshu Road Industrial Zone Qiaotou Community, Fuhai Street Baoan District, Shenzhen, China Test specification ........................... : Standard ........................................... : FCC Part 15.247 TRF Originator ................................. : Shenzhen CTA Testing Technology Co., Ltd. Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : projector Trade Mark ....................................... : N/A Manufacturer .................................... : SMoman Electronics (Shenzhen) Co., LTD Model/Type reference ...................... : M5 Listed Models .................................. : Refer to page 2 Modulation Type ............................... : CCK/DSSS/OFDM Operation Frequency ....................... : From 2412 - 2462MHz Rating ............................................... : DC 5.0V From external circuit Result ............................................... : PASS Report No.: CTA24092700201 Page 2 of 69 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : projector Model /Type : M5 Series Model No. M1, M2, M3, M4, M6, M7, M8, M9, M10, M20, M30, M40, M50, M60, M70, M80, M90, M100, M200, M300, M400, M500, M600, M700, M800, M900, V1, V2, V3, V4, V5, V6, V7, V8, V9, V10, V20, V30, V40, V50, V60, V70, V80, V90, V100, V200, V300, V400, V500, V600, V700, V800, V900 Applicant : Moman Electronics (Shenzhen) Co., LTD Address : Plant 202, No.5, Rongshu Road Industrial Zone Qiaotou Community, Fuhai Street Baoan District, Shenzhen, China Manufacturer : Moman Electronics (Shenzhen) Co., LTD Address : Plant 202, No.5, Rongshu Road Industrial Zone Qiaotou Community, Fuhai Street Baoan District, Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA24092700201 Page 3 of 69 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S .................................................................. 4 2 S U M M A R Y ............................................................................. 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Equipment Under Test 5 2.4 Short description of the Equipment under Test (EUT) 6 2.5 EUT operation mode 6 2.6 Block Diagram of Test Setup 6 2.7 Related Submittal(s) / Grant (s) 6 2.8 Modifications 6 3 T E S T E NV I R O N M E N T ............................................................... 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Test Description 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 T E S T C O N D I T I O N S A N D R E S U L T S ............................................ 10 4.1 AC Power Conducted Emission 10 4.2 Radiated Emission 13 4.3 Maximum Peak Conducted Output Power 19 4.4 Power Spectral Density 20 4.5 6dB Bandwidth 23 4.6 Out-of-band Emissions 26 4.7 Antenna Requirement 35 5 T E S T S E T U P P H O T O S O F T H E E U T .......................................... 36 6 P H O T O S O F T H E E U T ............................................................. 37 Report No.: CTA24092700201 Page 4 of 69 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 v05r02: Guidance for Compliance Measurements on Digit…

Text truncated - open the document above for the full version.

Report No.: CTA24092700201 Page 28 of 69 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11b 802.11g Reference Reference CH011 CH01 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24092700201 Page 29 of 69 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11g Reference Reference CH06 CH11 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24092700201 Page 30 of 69 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n20 Reference Reference CH01 CH06 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24092700201 Page 31 of 69 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n20 802.11n40 Reference Reference CH11 CH03 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24092700201 Page 32 of 69 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n40 Reference Reference CH06 CH09 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24092700201 Page 33 of 69 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Band-edge Measurements for RF Conducted Emissions: 802.11b Left bandedge Right bandedge 802.11g Left bandedge Right bandedge Report No.: CTA24092700201 Page 34 of 69 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n(HT20) Left bandedge Right bandedge 802.11n(HT40) Left bandedge Right bandedge Report No.: CTA24092700201 Page 35 of 69 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 4.7 Antenna Requirement Standard Applicable For intentional device, according to FCC 47 CFR Section 15.203: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited FCC CFR Title 47 Part 15 Subpart C Section 15.247(c) (1) (I): (i) Systems operating in the 2400-2483.5 MHz band that is used exclusively for fixed. Point-to-point operations may employ transmitting antennas with directional gain greater than 6dBi provided the maximum conducted output power of the intentional radiator is reduced by 1 dB for every 3 dB that the directional gain of the antenna exceeds 6dBi. Test Result: The maximum gain of antenna was 0.78 dBi. Remark:The antenna gain is provided by the customer , if the data provided by the customer is not accurate, Shenzhen CTA Testing Technology Co., Ltd. does not assume any responsibility. Report No.: CTA24092700201 Page 36 of 69 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 5 T e s t S e t u p P h o t o s o f t h e E U T Report No.: CTA24092700201 Page 37 of 69 Shenzhen CTA Testing Technology Co., Ltd. R…

Text truncated - open the document above for the full version.