2BGBLP140Smart Diagnostic System

GWSMART10 Smart Diagnostic System Specifications | Caractéristiques | Especificaciones Operating System | Système d'exploitation | Sistema operativo Android 10.0 Processor | Processeur | Procesador Quad-core processor 1.5GHz Memory | Mémoire | Memoria 4 GB RAM & 128 GB on-board memory Display | Affichage | Pantalla 10.1-inch IPS with 1920 * 1200 resolution Smart Diagnostic System GWSMART10 Battery | Batterie | Batería 6400mAh 7.2V Input Voltage | Tension d'entrée | Tensión de entrada 5V / 3A Operating Temp. | Température de fonctionnement. | Temperatura de trabajo. -10 °C to 50 °C (13 °F to 122 °F) Storage Temp. | Température de stockage. | Temperatura de almacenamiento. -40 °C to 70 °C (-40 °F to 158 °F) Dimensions | Dimensions | Tamaño (W x H x D) 297 mm x 196 mm x 36 mm GWSMART10 Thank you for choosing the GWSMART10 Wireless Bidirectional Diagnostic Tablet. Before using the GWSMART10 (hereafter referred to as "GWSMART10" or "Scan Tool"), please ensure that you read this user manual thoroughly. Be mindful of sections marked with “Note” or “Caution” as they provide important instructions for safe and correct operation. Safety Instructions for Proper Operation. To ensure safe operation of the GWSMART10 please follow the guidelines below:  Keep the device away from heat sources or fumes during use.  If the vehicle battery contains acid, avoid contact between your skin and the battery, and keep fire sources away during testing.  The exhaust gas of the vehicle contains harmful chemicals. Please ensure adequate ventilation.  Do not touch the vehicle cooling system components or exhaust manifolds when the engine is running due to the high temperatures reached.  Make sure the car is securely parked, Neutral is selected or the selector is at the P or N position to prevent the vehicle from moving when the engine starts.  Make sure the (DLC) Diagnostic Link Connector is functioning properly before starting the test to avoid damage to the Diagnostic Computer.  Do not switch off the power or unplug the connectors during testing.  Doing so may damage the ECU (Electronic Control Unit) and/or the Diagnostic Computer. GWSMART10 CAUTIONS  Avoid shaking, dropping, or disassembling the scan tool, as this may damage its internal components.  Use only your fingertips to interact with the LCD screen. Hard or sharp objects may cause damage.  Do not use excessive force.  Do not expose the screen to strong sunlight for a long period.  Please keep the scan tool away from water and moisture.  Store and use the scan tool only within the temperature ranges identified in the Technical Specifications section.  Keep the device away from strong magnetic fields. GEARWRENCH DIAGNOSTIC SUPPORT E-mail: [email protected] Telephone: 1-877-626-3433 Website: www.GEARWRENCH.com GWSMART10 GENERAL INTRODUCTION The GWSMART10 is an advanced scanning tool powered by the Android operating system. It supports multiple languages, making it suitable for use in various countries and regions. This OBD-II (On-Board Diagnostics version 2) scanner offers a range of comprehensive functions, enabling users to quickly access accurate diagnostic information. Key diagnostic capabilities include:  Full system diagnostics  Complete OBD-II functionality  Maintenance and reset functions, such as: o ABS (Anti-lock Braking System) bleed o Oil light reset o EPB (Electronic Parking Brake) reset o SAS (Steering Angle Sensor) reset o BMS (Battery Management System) matching o Injector coding o DPF (Diesel Particulate Filter) regeneration o TPMS (Tire Pressure Monitoring System) reset, and more. MAIN UNITS Tablet GWSMART10 1、USB C Port 2、Power Button 3、10.1-inch LCD 4、PoGoPin Port 5、Rear Camera 6、Speaker 7、Product Identification Tag 8、Metal Kickstand  VCI (Vehicle Communication Interface) BOX GWSMART10 1、DB15 Port 2、1.54-inch OLED 3、USB Type-B Port 4、DC Port 5、Product Identification Tag CONNECTING THE SCAN TOOL TO THE VEHICLE Wireless connection To ensure proper communication between the tablet and the vehicle, the scan tool must be connected to the vehicle's OBD-II port. Follow these steps: 1. Power on the tablet. GWSMART10 2. Connect the DB15 connector of main cable to VCI box. 3. Connect the OBDII-16 connector to DB15 connector of main cable,than plug the connector into the vehicle’s DLC port. 4. When the VCI box gets powered on,the tablet will automatically search for it and make a WIFI connection. The connection method is shown in the figure below: Wired connection 1. Connect DB15 connector to VCI box;connect OBDII-16 connector to vehicle’s DLC port. 2. Connect USB connector to VCI box;connect Type-C connector to the tablet. The connection method is shown in the figure below: ① ② ③ 1.Vehicle 2.VCI Box GWSMART10 COMPLIANCE INFORMATION FCC COMPLIANCE FCC ID: 2BGBLP140 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance GWSMART10 c…

Text truncated - open the document above for the full version.

2.911(d)(7)USAAgentv1.2 Section2.911(d)(7)USAAgentforServiceofProcess Companyname:ApexToolGroup,LLC Address:910RidgebrookRoad,Suite200Sparks,Maryland21152 ProductName:SmartDiagnosticSystem FCCID:2BGBLP140 Model(s):GWSMART10 2.911(d)(7)USADesignatedAgentforServiceofProcess We,[ApexToolGroup,LLC](“theapplicant”)designate[ApexToolGroup,LLC] NOTE1 forthepurposeofacceptingserviceofprocessonbehalfoftheapplicant. Applicantconsent:WeAcknowledgeourconsenttoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipment,andatthephysicalU.S. addressandemailaddressofthedesignatedagentandacknowledgeour acceptanceofourobligationtomaintainanagentforserviceofprocessintheUnited Statesfornolessthanoneyearaftereitherthegranteehaspermanentlyterminated allmarketingandimportationoftheapplicableequipmentwithintheU.S.,orthe conclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolving theequipment,whicheverislater. Agentobligation:WeAcknowledgeourobligationtoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipmentatourphysicalU.S. addressandemailaddressfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipment withintheU.S.,ortheconclusionofanyCommission-relatedadministrativeorjudicial proceedinginvolvingtheequipment,whicheverislater. USAAgent&Applicant Companyname:ApexToolGroup,LLC Address:910RidgebrookRoad,Suite200Sparks,Maryland21152 FRN：0035404995 ContactName:JarrettWolf TelephoneNo:+14103297016 Email:[email protected] Signature: Title:GeneralManager Date:Oct.24,2025 2.911(d)(7)USAAgentv1.2 NOTE1:AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforservice ofprocess. Reference;FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

ApexToolGroup,LLC 910RidgebrookRoad,Suite200Sparks,Maryland21152 AttestationStatements NotCoveredEntityApplicant&NotCoveredEquipment To:FederalCommunicationsCommissionDate:Oct.24,2025 7435OaklandMillsRoad, Columbia,MD21046,USA Ref:InformationRequiredbySection2.911(d)(5)(i)&(ii) FCCID:2BGBLP140 FRN:0035404995 ApexToolGroup,LLC(“theapplicant”)certifiesthat,asofthedateofthefilingoftheapplication,the applicantisnotidentifiedontheCoveredList,establishedpursuantto§1.50002ofreferencechapter, asanentityproducing“covered”communicationequipment.Theequipmentforwhichauthorizationis soughtisnot“covered”telecommunicationsequipmentandvideosurveillanceequipmentproducedby entitiesidentifiedontheCommission’sCoveredListthatprohibitedfromreceivinganequipment authorizationpursuanttosection§2.903oftheFCCrules. Sincerelyyours, ApplicantSignature PrintedName:JarrettWolf Title:GeneralManager

ShenzhenXtooltechIntelligentCo., Ltd. 17&18/F,A2 Building,CreativeCity, LiuxianAvenue,NanshanDistrict,Shenzhen,China 1 |P a g e AttestationStatements To: FederalCommunicationsCommissionDate: Sep. 19, 2025 7435 OaklandMills Road, Columbia,MD 21046,USA Subject:Attestationof Compliancewith FCC CoveredList SoftwareRequirements FCC ID :2AW3IP140 ProductName:Smart DiagnosticSystem This letter servesas an attestationthat the equipmentidentifiedabove☐is /☒is not(select one) "covered" softwareas definedunder the FederalCommunicationsCommission(FCC) CoveredList requirements,as outlinedinFCC 22-84andKDB 986446. Specifically,the undersignedcertifiesthat the equipmentfor which authorizationis sought: 1.Does not containcybersecurityor anti-virussoftwareproducedor providedbyKasperskyLab, Inc.or any of its successors,assignees,parents,subsidiaries,affiliates,or any entity that has rebranded or relabeledsoftwareproducedby the aforementionedentities. 2.Does not have the capabilityto store, run, or deliverany softwareidentifiedon the FCC CoveredList, includingbut not limitedto cybersecurityand anti-virussoftware. To supportthis attestation,the appendixevaluationdocumentationhas been preparedand is includedin the certificationfiling. This attestationis based on a thoroughevaluationof the device'sdesign,functionality,and software environment.The undersignedaffirmsthat the informationprovidedis accurateand completeto the best of their knowledge. Sincerelyyours, Applicant Signature Printed Name: Jarrett Wolf Title: General Manager ShenzhenXtooltechIntelligentCo.,Ltd. 17&18/F,A2Building,CreativeCity,LiuxianAvenue,NanshanDistrict,Shenzhen,China 2|Page EvaluationregardingtotheCoveredListSoftware: Compliance Methodology EvaluationProcessResults Deviceis Inherent compliance ☐ TheChipset(s)usedislimitedtorun theCybersecurityoranti-virus software. Compliance ☐ TheMemoryusedislimitedtorunthe Cybersecurityoranti-virussoftware. Compliance ☐ Thereisstoragecapacitylimitationfor storeorinstalltheCybersecurityor anti-virussoftware. Compliance ☐ Operatingsystemusedislimitedto run,installordelivertheCybersecurity oranti-virussoftware. Compliance Deviceisnot Inherent compliance ☒ EvaluationBasedonSoftware BillofMaterials(SBoM) Seeattached“SBoM“ Note:TheSBoMcontentislimited tothescopeofcoveredlist software(e.g.antivirusand cybersecuritysoftware). ☐ EvaluationBasedonScanfor Softwareonthedevice ☐ EvaluationBasedonFilesystemscan ☐ EvaluationBasedonRunning softwarecheck SBOM(SoftwareBillofMaterials)[ForDeviceisnotInherentcompliance] SectionComponentNameVersionSupplier 1 Fullsystem 5.7.57XTOOL 2 AutoVIN 5.7.57XTOOL 3 ReadECUInfo 5.7.57XTOOL 4 Readcode 5.7.57XTOOL 5 Clearcode 5.7.57XTOOL 6 Readlivedata 5.7.57XTOOL 7 Readfreezeframe 5.70XTOOL 8 Actuationtest 5.70XTOOL 9 Fullspecial function 20.93XTOOL 10 ECUConfiguration 20.02XTOOL 11 OfflineCoding 12 Programmable module installation 20.02XTOOL 13 OnlineECUCoding 5.20XTOOL 14 OnlineECU Programming 5.20XTOOL 15 J2534Protocol 4.70XTOOL

ApexToolGroup,LLC 910RidgebrookRoad,Suite200Sparks,Maryland21152 OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:Oct.24,2025 Subject;RequestforConfidentiality FCCID:2BGBLP140 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram OperationalDescription SoftwareSecurityInfo Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:JarrettWolf Title:GeneralManager

Apex Tool Group, LLC 910 Ridgebrook Road, Suite 200 Sparks, Maryland 21152 (Oct. 24, 2025) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BGBLP140 I, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Attestation of Global Compliance (Shenzhen) Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (Apex Tool Group, LLC). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) (Signature of applicant) Name: Jarrett Wolf Title: General Manager Tel: +1 410 329 7016 Fax: +1 410 329 7016 Email: [email protected]

Report No.: AGC16626250802AP03 Page 1 of 4 EXTERNAL PHOTOS All view of EUT Adapter 1 view of EUT Report No.: AGC16626250802AP03 Page 2 of 4 Top view of EUT Bottom view of EUT Report No.: AGC16626250802AP03 Page 3 of 4 Front view of EUT Back view of EUT Report No.: AGC16626250802AP03 Page 4 of 4 Left view of EUT Right view of EUT ****************************************End of Report*************************************

FCC ID and IC Label Location 40mm*30mm FCC ID: 2BGBLP140 IC: 32428-P140 HVIN: GWP140 PMN: GWSMART10

Report No.: AGC16626250802AP03 Page 1 of 9 INTERNAL PHOTOS Port view of EUT Open view-1 of EUT BT/2.4G WIFI/5G WIFI Antenna (Module TL8821CSSC) 2.4G WIFI Antenna (Module: ESP32) Report No.: AGC16626250802AP03 Page 2 of 9 Open view-2 of EUT Internal view-1 of EUT Report No.: AGC16626250802AP03 Page 3 of 9 Internal view-2 of EUT Internal view-3 of EUT Report No.: AGC16626250802AP03 Page 4 of 9 Internal view-4 of EUT Internal view-5 of EUT Report No.: AGC16626250802AP03 Page 5 of 9 Internal view-6 of EUT Internal view-7 of EUT Report No.: AGC16626250802AP03 Page 6 of 9 Internal view-8 of EUT Internal view-9 of EUT Report No.: AGC16626250802AP03 Page 7 of 9 Internal view-10 of EUT Internal view-11 of EUT Report No.: AGC16626250802AP03 Page 8 of 9 Internal view-12 of EUT Internal view-13 of EUT Report No.: AGC16626250802AP03 Page 9 of 9 Battery view of EUT Antenna view of EUT ****************************************End of Report*************************************

CALIBRATION DATA PROBE CALIBRATION DATA DIPOLE CALIBRATION DATA

Page1of78 SARTestReport ReportNo.:AGC16626250802FH01 FCCID: 2BGBLP140 APPLICATIONPURPOSE: OriginalEquipment PRODUCTDESIGNATION: SmartDiagnosticSystem BRANDNAME: GEARWRENCH MODELNAME: GWSMART10 APPLICANT: ApexToolGroup,LLC DATEOFISSUE: Oct.21,2025 STANDARD(S): IEEEStd.1528:2013 FCC47CFRPart2§2.1093 IEEEStdC95.1™-2019 REPORTVERSION: V1.0 AttestationofGlobalCompliance(Shenzhen)Co.,Ltd. ReportNo.:AGC16626250802FH01 Page 2 of 78 ReportReviseRecord ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/Oct.21,2025ValidInitialRelease ReportNo.:AGC16626250802FH01 Page 3 of 78 TestReport ApplicantNameApexToolGroup,LLC ApplicantAddress910RidgebrookRoad,Suite200Sparks,Maryland21152 ManufacturerNameShenzhenXtooltechintelligentCo.,Ltd. ManufacturerAddress 17&18/F,A2Building,CreativeCity,LiuxianAvenue,NanshanDistrict,Shenzhen, China FactoryNameBao'anBranchofShenzhenXtooltechIntelligentCo.,Ltd. FactoryAddress 2,3,4/F,Building12,TangtouThirdIndustrialZone,Shiyanstreet,Bao'anDistrict, Shenzhen. ProductDesignationSmartDiagnosticSystem BrandNameGEARWRENCH ModelNameGWSMART10 SeriesModelN/A DeclarationDifferenceN/A EUTVoltageDC7.2Vbybattery ApplicableStandard IEEEStd.1528:2013 FCC47CFRPart2§2.1093 IEEEStdC95.1™-2019 DateofreceiptoftestitemAug.13,2025 TestDateOct.02,2025toOct.07,2025 ReportTemplateAGCRT-US-5G/SAR(2021-04-20) Note:Theresultsoftestinginthisreportapplytotheproduct/systemwhichwastestedonly. PreparedBy CiciLi (ProjectEngineer) Oct.21,2025 ReviewedBy JackGui (Reviewer) Oct.21,2025 ApprovedBy AngelaLi (AuthorizedOfficer) Oct.21,2025 ReportNo.:AGC16626250802FH01 Page 4 of 78 TABLEOFCONTENTS 1.SUMMARYOFMAXIMUMSARVALUE...........................................................................................................5 2.GENERALINFORMATION................................................................................................................................6 2.1.EUTDESCRIPTION..........................................................................................................................................6 3.SARMEASUREMENTSYSTEM.........................................................................................................................8 3.1.THESATIMOSYSTEMUSEDFORPERFORMINGCOMPLIANCETESTSCONSISTSOFFOLLOWINGITEMS..................8 3.2.COMOSARE-FIELDPROBE...........................................................................................................................9 3.3.ROBOT...........................................................................................................................................................9 3.4.VIDEOPOSITIONINGSYSTEM.........................................................................................................................10 3.5.DEVICEHOLDER............................................................................................................................................10 3.6.SAMTWINPHANTOM....................................................................................................................................11 4.SARMEASUREMENTPROCEDURE...............................................................................................................12 4.1.SPECIFICABSORPTIONRATE(SAR)...............................................................................................................12 4.2.SARMEASUREMENTPROCEDURE.................................................................................................................13 4.3.RFEXPOSURECONDITIONS..........................................................................................................................15 5.TISSUESIMULATINGLIQUID..........................................................................................................................17 5.1.THECOMPOSITIONOFTHETISSUESIMULATINGLIQUID.....................................................................................17 5.2.TISSUEDIELECTRICPARAMETERSFORHEADANDBODYPHANTOMS...............................................................17 5.3.TISSUECALIBRATIONRESULT.........................................................................................................................18 6.SARSYSTEMCHECKPROCEDURE.............................................................................................................20 6.1.SARSYSTEMCHECKPROCEDURES..............................................................................................................20 6.2.SARSYSTEMCHECK....................................................................................................................................21 7.EUTTESTPOSITION.......................................................................................................................................23 7.1.BODYWORNPOSITION..................................................................................................................................23 8.SAREXPOSURELIMITS.................................................................................................................................24 9.TESTFACILITY................................................................................................................................................25 10.TESTEQUIPMENTLIST................................................................................................................................26 11.MEASUREMENTUNCERTAINTY..................................................................................................................27 12.CONDUCTEDPOWERMEASUREMENT......................................................................................................30 13.TESTRESULTS.............................................................................................................................................32 13.1.SARTESTRESULTSSUMMARY....................................................................................................................32 APPENDIXA.SARSYSTEMCHECKDATA…

Text truncated - open the document above for the full version.

SunnywayTechnology(CHINA) Add:1F,Building4,No.215-99,GaoGuangRoad,QingPu District,Shanghai,China Tel:+86-021-60835368Fax:+86-021-64842328 Email:[email protected]:www.sunnyway-iot.com ShanghaiShangyuanCommunication TechnologyCo.,LTD Antennaadmissionbook Customername:Yunjia Projectname:P140 Workingfrequencyband: 2400-2500MHZ,5150-5850MHZ Hardwareversion： PD_WIFI_V1.020230818 Shangyuanmaterialspecifications specificationsandmodels ShangYuanmaterialnumber Customermaterialnumber WIFI-2ant SZ25365IB74-2 2.1.09.12.014601 Changetheresume Preparation/changedateChangethecontent Changethe person edition 2025.08.06 AnewreleaseXiaokunxiong A ShangYuanwillsignthecolumn researchand development structure: examineandverify: QualityEngineer:ratify: radiofrequency:examineandverify: Thecustomerwillsignthecolumn electronicengineerprojectmanagerconstructionengineerQualityengineer 2 目录 一、Iteminformation ....................................................................................................................................................3 二、Antennamatchingcircuit ........................................................................................................................................3 三、Completemachinetestdata...................................................................................................................................4 3.1S11Descriptionofthetestmethod ..................................................................................................................4 3.2Testenvironment .............................................................................................................................................4 3.3Thepassivetestparameters.............................................................................................................................5 3.4Activetestdata...............................................................................................................................................7 四、Theprototypeenvironmentprocessingmode............................................................................................................8 五、Antennaloadingposition........................................................................................................................................8 六、Massproductionantennaindex.............................................................................................................................8 七、scheduledrawing....................................................................................................................................................9 八、ROHSrestrictedsubstancecompositionquestionnaire..............................................................................................10 九、mannerofpacking ...............................................................................................................................................11 7 一、Iteminformation .11Schematicdiagram .22Antennaproductdiagram 二、Antennamatchingcircuit 7 三、Completemachinetestdata 3.1S11Descriptionofthetestmethod TestEquipment:NetworkAnalyzer(AgilentE5071C) Testmethod:Exporta50OhmCABLEcablefromtheinstrumenttestport,connecttheSMAconnectorofthe testdeviceafterthecalibrator,andrecordtheecholossandstandingwaveratiocorrespondingto therelevantfrequencypoint. Thetestschematicdiagramisasfollows: Schematicdiagramofthetest 3.2Testenvironment TestSystem:MPS6450Multi-sensorOTAMeasurementSystem(XH-IoT) Testenvironment:temperature22°C±3°C,humidity50%±15% Testequipment:UsethenetworkanalyzerR&SZND/AgilentE5071Cwhentestingthepassivedata Whentestingactivedata,usethecomprehensivemeterAgilent8960/CMW500/SP9500E/SP8315 7 3.3Thepassivetestparameters standing-waveratioVSWR 频率（GHZ） 2400250051505850 驻波比 1.741.411.331.27 Passiveefficiency 7 Passivedirectiondiagram RadiationAppleFigure2.4G 7 3.4Activetestdata 7 四、Theprototypeenvironmentprocessingmode NONE 五、Antennaloadingposition 六、Massproductionantennaindex Whentheantennaisinmassproduction,thestandingwaveratioisusedastheteststandard formassproduction. Basedonthedifferencesoftheprojectitself,thefollowingcriteriaaregiven: Frequency(MHz)Massproductionstandards 2400-2450MHZ 5150-5850MHZ VSWR(massproductionperformance) <VSWR(recognizedperformance)±0.5 8 七、scheduledrawing 9 八、ROHSrestrictedsubstancecompositionquestionnaire 10 九、mannerofpacking

Page 1 of 98 FCC Test Report Report No.: AGC16626250802FR01 FCC ID : 2BGBLP140 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Smart Diagnostic System BRAND NAME : GEARWRENCH MODEL NAME : GWSMART10 APPLICANT : Apex Tool Group, LLC DATE OF ISSUE : Jan. 22, 2026 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC16626250802FR01 Page 2 of 98 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jan. 22, 2026 Valid Initial Release Report No.: AGC16626250802FR01 Page 3 of 98 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Receiver Input Bandwidth ......................................................................................................................... 7 2.6 Equally Average Use of Frequencies and Behaviour................................................................................ 7 2.7 Pseudorandom Frequency Hopping Sequence ........................................................................................ 8 2.8 Special Accessories .................................................................................................................................. 9 2.9 Equipment Modifications ........................................................................................................................... 9 2.10 Antenna Requirement ............................................................................................................................. 9 3. Test Environment .......................................................................................................................................... 10 3.1 Address of The Test Laboratory .............................................................................................................. 10 3.2 Test Facility .............................................................................................................................................. 10 3.3 Environmental Conditions ....................................................................................................................... 11 3.4 Measurement Uncertainty ....................................................................................................................... 11 3.5 List of Equipment Used ........................................................................................................................... 12 4.System Test Configuration ........................................................…

Text truncated - open the document above for the full version.