2BGC8-CS11recording pen

CS�� Instruction Manual Please read the user manual carefully before using the product and keep it properly � Confirm � Downturn � Loudspeaker �� Back splint �� Recording Keys �� Photo �� On/Off key �� Turn/WiFi switch �� Data interface �� Video � ¼ screwdriver � Fill light key � Upturn � HD lens � Fill light � Display screen Mic Holes �� �� Charge lamp �� TF card groove �� Reset I. Product Profile � � � � � � � � �� �� �� �� �� �� �� �� �� �� �� � III. Methods of use ➀ On/Off button: ➁Photo button: ➂Video key: Long press the " " key in the off state to light up the display and hear the beep, long press the " " key in the on state to turn off the display and hear the beep. Short press " "key to return to standby mode when taking photos, recording mode, and short press on/off key to return in setting. Short press the " " key to enter the photo mode, short press once to take a photo, short press the on/off key to return to standby mode. �、Short press " " key to start recording when in standby mode, short press to stop recording when in recording mode. �、When in standby mode, long press " "key to open motion detection, short press to close motion detection. II. Functional description �: The lens of this product can be rotated ���°, and the angle can be adjusted according to the needs during use. �: The charging indicator light is red, the red light flashes slowly when charging, the red light is always on when fully charged. �: The working indicator light is red, the red light is always on when switching on, standby and working. �: Please use genuine TF card, support �-���G. �: Reset key: If the machine is dead or connection failure, please use the reset pin to insert it into the RESET hole for �-� seconds under the boot state, the machine will automatically restore the factory settings and shut down, if you need to use it again, please press the boot key. IV. APP Download and Installation Scan the QR code below to download and install Sports Camera, or search for Sports Camera on Google play or App store to download and install. ➇ Confirmation key: ➈ Scroll down key: In standby mode long press " " key to enter the video screen function setting, in photo mode long press " " key to enter the photo parameter setting, in viewing album video and recording files short press " " key to Play the video or recording, short press " " key to stop playing, long press " " key to delete the photo or video screen. Short press the " " button to scroll down while setting or viewing album videos and recordings. ➃Fill light key: ➄ Record button: ➅ Flip key: ➆ Upside down key: Short press " " key to control the screen off, long press " " key to turn on the LED light, long press " " key to turn off the LED light in the LED light on Short press " " key to enter recording mode, short press " " key to start recording in recording mode, short press " " key to stop recording in recording state. Short press " " key to turn on the screen flip ���°, short press " " key to turn off the screen flip ���° under the on state, long press " " key to turn on the hotspot WiFi, WiFi on Long press " " key to turn off the hotspot WiFi. Short press the " " key to scroll up in settings or albums, and short press the " " key to fast forward times when playing back videos. V. Hotspot WiFi �.WiFi Switch: Under the boot state, long press the flip key to turn on WiFi, long press the flip key again to turn off WiFi. �.WiFi Connection: The WiFi setting of your mobile phone or tablet PC will search for a connection with the name of the network starting with "NM (e.g. NM_FF��)", after the connection is successful, open the Sports Camera App and enter the main interface and tap "". Enter the real-time preview interface, and select video/photo in the preview interface. If you encounter any other problems during operation, please click Help in the main interface. Charging:This machine has a built-in rechargeable lithium battery, access to �V/�A USB power charging (does not support fast charging) When you first use this machine, please charge it first, the red light flashes quickly when charging, full of red light is always on, don't use the function when charging, it may lead to the battery as well as the TF card damage! Please strictly abide by the relevant laws of the country in which you are using this product, and do not use this product for any illegal purposes, and the company is not responsible for any disputes caused by unauthorised video or audio recording. Notes: Attention: Working temperature: Please use it in natural temperature, do not use it in the temperature that the human body can not adapt to. Working humidity: Please use the product in human suitable environmental humidity, do not put the product in a wet working environment, this product is not waterproof, avoid getting wet or exposed to rain. Shooting Requirements: Please use it in the environment of sufficient light source, do not point the camera directly to the sun and other strong light sources, so as to avoid damage to the optical device. Cleaning requirements: Do not use it in an environment with high dust density, so as to prevent the lens and other parts from being contaminated with dust, which may affect the video effect. There is a risk of data loss due to malfunctioning of the machine, so please This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part �� of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and…

Text truncated - open the document above for the full version.

Product specification Quick Reference Date ITEM：Antenna module on the system board Antenna type： Frequenc Range：2400 ~ 2500MHz Efficiency (dB)：70% Gain (dBi)：2 Input Impendence(ohm)：50 Polarization Type：Vertical & Horizontal VSW：< 2 Antenna Layout & module on the system board Manufacturer: Shenzhen Haishirui Technology Co., Ltd Address: 130, Building T01, South China City, Hehua Community, Pinghu Street, Longgang District, Shenzhen PCB Antenna Antenna Gain The Environment of Antenna Radiation Pattern 3D radiation pattern diagram

Page 1 of 5 Report No.: LGT24H022 Appendix - External Photographs of EUT Constructional Details Model: CS11 Photo 1 Photo 2 Page 2 of 5 Report No.: LGT24H022 Photo 3 Photo 4 Page 3 of 5 Report No.: LGT24H022 Photo 5 Photo 6 Page 4 of 5 Report No.: LGT24H022 Photo 7 Photo 8 Page 5 of 5 Report No.: LGT24H022 Photo 9 Photo 10

Label FCC ID: 2BGC8-CS11

Page 1 of 5 Report No.: LGT24H022 Appendix - Internal Photographs of EUT Constructional Details Model: CS11 Photo 1 Photo 2 Page 2 of 5 Report No.: LGT24H022 Photo 3 Photo 4 ANT Page 3 of 5 Report No.: LGT24H022 Photo 5 Photo 6 Page 4 of 5 Report No.: LGT24H022 Photo 7 Photo 8 Page 5 of 5 Report No.: LGT24H022 Photo 9

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China RF TEST REPORT Product Name: recording pen Model Name: CS11 FCC ID: 2BGC8-CS11 Issued For : Shenzhen Haishirui Technology Co., Ltd 130, Building T01, South China City, Hehua Community, Pinghu Street, Longgang District, Shenzhen Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT24H022HA02 Sample Received Date: Aug. 07, 2024 Date of Test: Aug. 07, 2024 – Aug. 21, 2024 Date of Issue: Aug. 21, 2024 Report No.: LGT24H022HA02 Page 2 of 9 TEST REPORT CERTIFICATION Applicant: Shenzhen Haishirui Technology Co., Ltd Address: 130, Building T01, South China City, Hehua Community, Pinghu Street, Longgang District, Shenzhen Manufacture: Shenzhen Haishirui Technology Co., Ltd Address: 130, Building T01, South China City, Hehua Community, Pinghu Street, Longgang District, Shenzhen Product Name: recording pen Trademark: N/A Model Name: CS11 Sample Status: Normal APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47CFR §2.1093 KDB 447498 D01 General RF Exposure Guidance v06 PASS Prepared by: Approved by: Zane Shan Vita Li Engineer Technical Director Report No.: LGT24H022HA02 Page 3 of 9 TABLE OF CONTENTS 1 . GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST LABORATORY 5 2 . FCC 47CFR §2.1093 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 TEST RESULT 8 APPENDIX III - PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS 9 Report No.: LGT24H022HA02 Page 4 of 9 Revision History Rev. Issue Date Revisions 00 Aug. 21, 2024 Initial Issue Report No.: LGT24H022HA02 Page 5 of 9 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name: recording pen Trademark: N/A Model Name: CS11 Series Model: N/A Model Difference: N/A Frequency Bands: 2.4G WLAN 802.11b/g/n(20MHz): 2412~2462MHz 802.11n(40MHz):2422~2452MHz Rating: Input: DC 5V 1A Battery: Capacity: 1000mAh Rated Voltage: 3.7V Hardware Version: N/A Software Version: N/A 1.2 TEST LABORATORY Company Name: Shenzhen LGT Test Service Co., Ltd. Address: Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Accreditation Certificate A2LA Certificate No.: 6727.01 FCC Registration No.: 746540 CAB ID: CN0136 Report No.: LGT24H022HA02 Page 6 of 9 2. FCC 47CFR §2.1093 REQUIREMENT 2.1 TEST STANDARDS The limit for Maximum Permissible Exposure (MPE) specified in KDB 447498 D01 General RF Exposure Guidance v06 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. 2.2 LIMIT Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. Report No.: LGT24H022HA02 Page 7 of 9 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] • [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz. Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Report No.: LGT24H022HA02 Page 8 of 9 2.3 TEST RESULT Turn up Result Mode Turn up Power 2.4G WIFI-802.11b 8.5±1dBm 2.4G WIFI-802.11g 8±1dBm 2.4G WIFI-802.11n(HT20) 8±1dBm 2.4G WIFI-802.11n(HT40) 8±1dBm The MPE result of worst mode: RF Function Frequency (MHz) Max Turn up Power (dBm) Max Turn up Power (mW) Estimated SAR Limit Ratio Result 2.4G WIFI 2437 9.50 8.91 2.783 3 0.928 Pass Note: 1. The estimated SAR≤ 3.0 for 1-g SAR, Separation distance ≤ 5mm, complies with the exemption requirements. Report No.: LGT24H022HA02 Page 9 of 9 APPENDIX III - PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Note: Please see the attached CS11_EUT Photos. ※※※※※END OF THE REPORT※※※※※

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China RF TEST REPORT Product Name: recording pen Model Name: CS11 FCC ID: 2BGC8-CS11 Issued For : Shenzhen Haishirui Technology Co., Ltd 130, Building T01, South China City, Hehua Community, Pinghu Street, Longgang District, Shenzhen Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT24H022RF02 Sample Received Date: Aug. 07, 2024 Date of Test: Aug. 07, 2024 – Aug. 21, 2024 Date of Issue: Aug. 21, 2024 Report No.: LGT24H022RF02 Page 2 of 71 TEST REPORT CERTIFICATION Applicant: Shenzhen Haishirui Technology Co., Ltd Address: 130, Building T01, South China City, Hehua Community, Pinghu Street, Longgang District, Shenzhen Manufacturer: Shenzhen Haishirui Technology Co., Ltd Address: 130, Building T01, South China City, Hehua Community, Pinghu Street, Longgang District, Shenzhen Product Name: recording pen Trademark: N/A Model Name: CS11 Sample Status: Normal APPLICABLE STANDARDS STANDARD TEST RESULTS FCC Part 15.247, Subpart C ANSI C63.10-2013 PASS Prepared by: Approved by: Zane Shan Vita Li Engineer Technical Director Report No.: LGT24H022RF02 Page 3 of 71 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 TEST SOFTWARE AND POWER LEVEL 10 2.4 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 11 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 12 3. EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.2 RADIATED EMISSION MEASUREMENT 17 4. CONDUCTED SPURIOUS & BAND EDGE EMISSION 28 4.1 LIMIT 28 4.2 TEST PROCEDURE 28 4.3 DEVIATION FROM STANDARD 28 4.4 TEST SETUP 28 4.5 EUT OPERATION CONDITIONS 28 4.6 TEST RESULTS 28 5. POWER SPECTRAL DENSITY TEST 29 5.1 LIMIT 29 5.2 TEST PROCEDURE 29 5.3 DEVIATION FROM STANDARD 29 5.4 TEST SETUP 29 5.5 EUT OPERATION CONDITIONS 29 5.6 TEST RESULTS 29 6. BANDWIDTH TEST 30 6.1 LIMIT 30 6.2 TEST PROCEDURE 30 6.3 DEVIATION FROM STANDARD 30 6.4 TEST SETUP 30 6.5 EUT OPERATION CONDITIONS 30 6.6 TEST RESULTS 30 Report No.: LGT24H022RF02 Page 4 of 71 7. PEAK OUTPUT POWER TEST 31 7.1 LIMIT 31 7.2 TEST PROCEDURE 31 7.3 DEVIATION FROM STANDARD 31 7.4 TEST SETUP 31 7.5 EUT OPERATION CONDITIONS 31 7.6 TEST RESULTS 31 8. ANTENNA REQUIREMENT 32 8.1 STANDARD REQUIREMENT 32 8.2 EUT ANTENNA 32 APPENDIX I - TEST RESULTS 33 DUTY CYCLE 33 MAXIMUM PEAK CONDUCTED OUTPUT POWER 38 -6DB BANDWIDTH 39 OCCUPIED CHANNEL BANDWIDTH 44 MAXIMUM POWER SPECTRAL DENSITY LEVEL 49 BAND EDGE 54 CONDUCTED RF SPURIOUS EMISSION 61 APPENDIX II - MEASUREMENT PHOTOS 70 APPENDIX III - PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS 71 Report No.: LGT24H022RF02 Page 5 of 71 Revision History Rev. Issue Date Revisions 00 Aug. 21, 2024 Initial Issue Report No.: LGT24H022RF02 Page 6 of 71 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted Band Edge Emission PASS -- Part 15.247(d)/ Part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2013. Report No.: LGT24H022RF02 Page 7 of 71 1.1 TEST FACTORY Company Name: Shenzhen LGT Test Service Co., Ltd. Address: Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Accreditation Certificate A2LA Certificate No.: 6727.01 FCC Registration No.: 746540 CAB ID: CN0136 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF Output Power, Conducted ±0.71dB 2 Power Spectral Density, Conducted ±1.57 dB 3 Unwanted Emission, Conducted ±0.63dB 4 Conducted emission ±2.80dB 5 All Emissions, Radiated (0.009-30MHz) ±2.16dB 6 All Emissions, Radiated (30MHz-1GHz) ±4.40dB 7 All Emissions, Radiated (1GHz-18GHz) ±5.49dB Note: The measurement uncertainty is not included in the test result. Report No.: LGT24H022RF02 Page 8 of 71 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name: recording pen Trademark: N/A Model Name: CS11 Series Model: N/A Model Difference: N/A Product Description: Operation Frequency: 802.11b/g/n(20MHz): 2412~2462MHz 802.11n(40MHz):2422~2452MHz Modulation Type: 802.11b(DSSS): CCK, DQPSK, DBPSK 802.11g(OFDM): BPSK, QPSK, 16-QAM, 64-QAM 802.11n(OFDM): BPSK, QPSK, 16-QAM, 64-QAM Number of Channel: 802.11b/g/n: 11CH 802.11n: 7CH Antenna Designation: PCB Antenna Antenna Gain(dBi): 2dBi Channel List: Please refer to the Note 3. Rating: Input: DC 5V 1A Battery: Capacity: 1000mAh Rated Voltage: 3.7V Hardware Version: N/A Software Version: N/A Connecting I/O Port(s): Please refer to the Note 1. Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User Manual. 2. The antenna information refers …

Text truncated - open the document above for the full version.

Page 1 of 2 Report No.: LGT24H022 Appendix - Test Setup photos Set-up for Radiated Spurious Emission, Below 1GHz Set-up for Radiated Spurious Emission, Above 1GHz Page 2 of 2 Report No.: LGT24H022 Set-up for Conducted Emission