2BGDY-H02A4 Thermal Printer

Finder Card User Manual Add Your Finder Card: Stat the APP: Open Find My™ on your supported iPhone or iPad and allow notifcations from the APP. Connect Finder Card: 1.Press the button to power on Finder Card , 2.Select “ ltems " tab , then tap " Add ltem " , and next tap “ Other supported items ", 3.Once Finder Card is located , tap " Connect ". 4.Choose a recognizable name and emoji for your Finder Card and tap " Continue ", 5. Find My™ APP wil ask for confirmation to add Finder Card to your Apple lD , and tap " Continue ", 6.Tap “ Finish " and your Finder Card will be set up and ready to be connected to whatever Finder Card you wish to locate , e.g. your keys . Remove Finder Card: 1.Open Find My™ APP and select “ ltems " tab, 2.Tap on your Finder Card from the list, 3.Please ensure “ Lost Mode " is disabled, 4.Scroll to the bottom of the screen and tap“ Remove ltem ”, 5.A summary will open , then tap “ Remove " to confimm. Power on： 1、Locate the button on the front of the Finder Card. 2、Press the button once. One confirmation beeps will sound. 3、If power off by botton and not paired. Press the button again. One confirmation beeps will sound Power off： 1、Locate the button on the front of the Finder Card. 2、Quickly press the button four times. On the fourth press, hold the button for three seconds. Two confirmation beeps will sound Factory Reset： 1、Locate the button on the front of the Finder Card. 2、Quickly press the button five times. On the fifth press, hold the button for three seconds. Two confirmation beeps will sound. Locate Your Finder Card: — Find Finder Card when lt's Nearby: 1. Open Find My™ app and select the “ ltems " tab， 2. Tap on your Finder Card from the list , 3. Tap“ Play Sound " to make your Finder Card Beep, 4. Tap“ Stop Sound " to stop the beeps once you find it . —Find Finder Card's last Known Location: 1. Open Find My™m app and select the “ ltems " tab 2. Tap on your Finder Card from the list , 3.Your Finder Card's last known location will appear on the map， 4. To navigate to that last known location , tap “ Direction " to open the Apple Maps app. Find Finder Card Out of Range — Enabling “ Notify When Left Behind ”: 1. Open Find My™ app and select the " ltems " tab , 2. Tap on your Finder Card from the list , 3. Under“ Notifications " enable the “ Notify When Left Behind " toggle , 4. You will receive a notification when you leave your Finder Card behind and it's no longer in range of your device . — Enabling “ Notify When Found ”: 1.Under “ Notifications " enable the " Notify When Found " toggle , 2.When your Finder Card is seen by another Find My™ enabled device , you will receive a notification of its updated location . 3.Note: “ Notify When Found " can only be activated when your Finder Card is out of range . When Your Finder Card is Lost —Enabling “ Lost Mode ” 1.Open Find My™ app and select the “ ltems " tab, 2.Tap on your Finder Card from the list , 3. Under “ Lost Mode " tap “ Enable ”, 4. A screen detailing Lost Mode will pop up , tap “ Continue ”, 5. Enter your phone number or email address and tap “ Next ”, 6. You may enter a message that will be shared with the person that finds your item, 7. Tap “ Activate " to enable “ Lost Mode ”, 8. Note: When “ Lost Mode " is enabled ,“ Notify When Found “ is automatically enabled. 9. Note: When “ Lost Mode " is enabled , your Finder Card is locked and cannot be paired to a new iPhone or iPad. Extras —Serial Number Look Up If an Apple device user finds a lost Finder Card, they can view the product serial number and owner information through the following methods 1、Locate the button on the front of the Finder Card. 2、Press the button twice —Unwanted Tracking If any Find My network accessory separated from its owner is seen moving with you overtime , you'll be notified in on of two ways : 1.lf you have an iPhone , iPad or iPod touch , Find My will send a notification to your Apple device .This feature is available on iOS or iPad OS 14.5 or later , 2. lf you don't have an iOS device or a smartphone , Find My network accessory that isn't with it's owner for a period of time will emit a sound when it's moved . These features were created specifically to discourage people from trying to track you without your knowledge . Others The Apple Find My network provides an easy, secure way to locate compatible personal items using the Find My app on your iPhone, iPad, Mac, or the Find Items app on Apple Watch. To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended. The Find ltems app on Apple Watch requires the latest version of watchOS. Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S.and other countries and is used under license. FCC Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can …

Text truncated - open the document above for the full version.

Shenzhen Heruikun Intelligent Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-09-09 FCC ID: 2BGDY-H02 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Shenzhen Heruikun Intelligent Technology Co., Ltd certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Shenzhen Heruikun Intelligent Technology Co., Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: Shenzhen Heruikun Intelligent Technology Co., Ltd Address: Building 1, Phase I, Jiazhaoye Central Plaza, Bantian Street, Longgang District Contact Person: XiaoYun He Tel.: 15914054180 Email: [email protected] Sincerely, Signature:

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:4358SBANNOCKSTENGLEWOOD,CO80110UnitedStates FRN:0034562900 ContactName:PeterDavis TelephoneNo:561-235-6113 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofShenzhenHeruikunIntelligentTechnologyCo.,Ltd TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:ShenzhenHeruikunIntelligentTechnologyCo.,Ltd ProductDescription:Findercard FRN:0035415108 GranteeCode:2BGDY FCCID:2BGDY-H02 ContactName:XiaoYunHe Address:Building1,PhaseI,JiazhaoyeCentralPlaza,BantianStreet,LonggangDistrict TelephoneNo:15914054180 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2024/9/9 Applicant’sName:XiaoYunHeUSAgentforServiceofProcess’sName: Title:ManagerTitle:Manager SignatureSignature

Shenzhen Heruikun Intelligent Technology Co., Ltd Date：Sep. 09, 2024 Product Model Number: Finder card FCC ID：2BGDY-H02 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 15914054180 On behalf of: Shenzhen Heruikun Intelligent Technology Co., Ltd

Shenzhen Heruikun Intelligent Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 9, 2024 Subject; Request for Confidentiality FCC ID: 2BGDY-H02 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: XiaoYun He Title: Manager

Product specification Quick Reference Date Antenna module on the system board Frequenc Range 2400 ~ 2500GHz Ant. Port Input Pwr. (dBm) 0 (Typ. BT class 2 output power) Tot. Rad. Pwr. (dBm) -1.2 (Input pwr – loss pwr) Peak EIRP(dBm) 0 Directivity (dBi) 1 (all direction antenna) Efficiency (dB) 1.0% Gain (dBi) 1.68dBi Maximum Power (dBm) 0 (XY-plane) Minimum Power (dBm) 0(XY-plane) Avg. Power (dBm) 0(XY-plane) Input Impendence(ohm) 50 Polarization Type V ertical & Horizontal V . S .W . R < 6 Antenna Type PCB Antenna All the technical data and information contained herein are subject to change without prior notice Antenna Layout & module on the system board Antenna Gain Gain Table Unit in dBi @2.44GHz XY-plane XZ-plane YZ-plane Efficiency Peak Avg. Peak Avg. Peak Avg. Module Board 1.35 -0.48 1.68 -3.83 1.11 -2.99 1.0% Return Loss 3D radiation pattern diagram XY-plane XZ-plane YZ-plane Manufacturer's Address: Building 1, Building 1, Phase I, Jiazhaoye Central Plaza, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen

Ext Photos Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

Locate with Apple Find My Locate with Apple Find My Locate with Apple Find My Model Model Model FCC ID:2A8EG-XXXXXX FCC ID:2A8EG-XXXXXX FCC ID:2A8EG-XXXXXX Locate with Apple Find My Locate with Apple Find My Locate with Apple Find My Locate with Apple Find My Locate with Apple Find My Locate with Apple Find My Model Model Model Model Model Model FCC ID:2A8EG-XXXXXXFCC ID:2A8EG-XXXXXX FCC ID:2A8EG-XXXXXX FCC ID:2A8EG-XXXXXX FCC ID:2A8EG-XXXXXX FCC ID:2A8EG-XXXXXX 8 5 . 6 0 m m 8 5 . 6 0 m m 8 5 . 6 0 m m 8 5 . 6 0 m m 54.00 mm 54.00 mm 54.00 mm 54.00 mm Locate with Apple Find My Locate with Apple Find My Locate with Apple Find My Model Model Model FCC ID:2A8EG-XXXXXX FCC ID:2A8EG-XXXXXX FCC ID:2A8EG-XXXXXX 1.80 mm 1.80 mm 1.80 mm PT432C 字符丝印白色 PT431C PT7544C FINDER CARDI RECHARGEABLE FIND MY TRACKER IMOOEL: Ho2 3.7V=100mAh | DESIGNED BY HERUIKUNI MADE IN CHINA FINDER CARD| RECHARGEABLE FIND MY MODEL: H02 |3.7V=100mAh SN:020240429MXPW001 FCC ID:2BGDYH02 4.344 mm 18.42 mm 1.455 mm 19.766 mm

Int Photo Photo 7 Photo 8 Photo 9 Photo 10 Photo 11 Photo 12

- Page 1 of 9 - Report No.: HB20240819010E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, T ianliao Community, Yutang Street, Guangming District, Shenzhen,China Te l : (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: Finder card Trade Mark: N/A Model Number: H02 FCC ID: 2BGDY-H02 Prepared for Shenzhen Heruikun Intelligent Technology Co., Ltd Building 1, Phase I, Jiazhaoye Central Plaza, Bantian Street, Longgang District Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 9 - Report No.: HB20240819010E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, T ianliao Community, Yutang Street, Guangming District, Shenzhen,China Te l : (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 6 2.1 TEST LABORATORY ..................................................................................................................................................... 6 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 6 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 6 2.4 TEST SOFTWARE ........................................................................................................................................................ 6 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 7 4 RF EXPOSURE..................................................................................................................................................... 8 4.1 STANDALONE SAR TEST EXCLUSION CONSID E R AT I O N S........................................................................................................ 8 4.1.1. Limit ............................................................................................................................................................ 8 4.1.2. Test Procedures ........................................................................................................................................... 8 4.1.3. Test Result ................................................................................................................................................... 9 - Page 3 of 9 - Report No.: HB20240819010E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, T ianliao Community, Yutang Street, Guangming District, Shenzhen,China Te l : (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Heruikun Intelligent Technology Co., Ltd Address ................................. : Building 1, Phase I, Jiazhaoye Central Plaza, Bantian Street, Longgang District Manufacturer's Name .......... : Shenzhen Heruikun Intelligent Technology Co., Ltd Address ................................. : Building 1, Phase I, Jiazhaoye Central Plaza, Bantian Street, Longgang District Product description Product name ........................ : Finder card Model Number ....................... : H02 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ..................... : KDB 447498 D01 General RF Exposure Guidance v06 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Aug. 19, 2024~Sep. 04, 2024 Test Result .............................................. : Pass Testing Engineer : (Zoe Su) Technical Manager : (Mark Chen) Authorized Signatory : ( Leo Su) - Page 4 of 9 - Report No.: HB20240819010E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, T ianliao Community, Yutang Street, Guangming District, Shenzhen,China Te l : (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 Sep. 06, 2024 Original - Page 5 of 9 - Report No.: HB20240819010E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, T ianliao Community, Yutang Street, Guangming District, Shenzhen,China Te l : (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com 1 General Description 1.1 Description of EUT Product name: Finder card Model nam…

Text truncated - open the document above for the full version.

- Page 1 of 51 - Report No.: HB20240819010E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: Finder card Trade Mark: N/A Model Number: H02 FCC ID: 2BGDY-H02 Prepared for Shenzhen Heruikun Intelligent Technology Co., Ltd Building 1, Phase I, Jiazhaoye Central Plaza, Bantian Street, Longgang District Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 51 - Report No.: HB20240819010E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 6 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 6 1.2 TEST MODE .............................................................................................................................................................. 6 1.3 OPERATION CHANNEL LIST ........................................................................................................................................... 6 1.4 TEST SETUP .............................................................................................................................................................. 7 1.5 ANCILLARY EQUIPMENT .............................................................................................................................................. 7 2 SUMMARY OF TEST RESULT ............................................................................................................................... 8 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 9 3.1 TEST LABORATORY ..................................................................................................................................................... 9 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 9 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 9 3.4 TEST SOFTWARE ...................................................................................................................................................... 10 4 LIST OF TEST EQUIPMENT .................................................................................................................................11 5 TEST ITEM AND RESULTS ...................................................................................................................................13 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 13 5.1.1 Standard Requirement ............................................................................................................................. 13 5.1.2 Test Result ................................................................................................................................................. 13 5.2 CONDUCTED EMISSION ............................................................................................................................................. 14 5.2.1 Limits ........................................................................................................................................................ 14 5.2.2 Test Procedures ......................................................................................................................................... 14 5.2.3 Test Setup .................................................................................................................................................. 15 5.2.4 Test Result ................................................................................................................................................. 15 5.3 RADIATED EMISSION ................................................................................................................................................ 18 5.3.1 Limits ........................................................................................................................................................ 18 5.3.2 Test Procedures ......................................................................................................................................... 18 5.3.3 Test Setup .................................................................................................................................................. 18 5.3.4 Test Result ................................................................................................................................................. 19 5.3.5 Band Edge - Radiated ............................................................................................................................... 23 5.3.6 Spurious emission in restricted band 1GHz-25GHz .................................................................................. 24 5.4 PEAK OUTPUT POWER .............................................................................................................................................…

Text truncated - open the document above for the full version.

- Page 40 of 51 - Report No.: HB20240819010E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com BLE 2M: Band Edge, Left Side BLE 2M: Band Edge, Right Side - Page 41 of 51 - Report No.: HB20240819010E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com 5.9 Spurious RF Conducted Emissions 5.9.1 Limit Below -20dB of the highest emission level in operating band. 5.9.2 Measuring Instruments The Measuring equipment is listed in the section 4 of this test report. 5.9.3 Test Procedure The Spurious RF conducted emissions compliance of RF radiated emission should be measured by following the guidance in ANSI C63.10-2020 with respect to maximizing the emission by rotating the EUT, measuring the emission while the EUT is situated in three orthogonal planes (if appropriate), adjusting the measurement antenna height and polarization etc. Set RBW=100kHz and VBW= 300kHz to measure the peak field strength, and measure frequency range from 9kHz to 26.5GHz. 5.9.4 Test Setup 5.9.5 Test Results Note: 1: The measurement frequency range is from 9kHz to the 10th harmonic of the fundamental frequency. The lowest, middle and highest channels are tested to verify the spurious emissions and band edge measurement data. 2: The worst mode is GFSK mode, and the report only show the worst mode data. EUT Spectrum Analyzer - Page 42 of 51 - Report No.: HB20240819010E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com BLE 1M GFSK on Channel 00 GFSK on Channel 00 GFSK on Channel 19 GFSK on Channel 19 GFSK on Channel 39 GFSK on Channel 39 - Page 43 of 51 - Report No.: HB20240819010E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com BLE 2M GFSK on Channel 00 GFSK on Channel 00 GFSK on Channel 19 GFSK on Channel 19 GFSK on Channel 39 GFSK on Channel 39 - Page 44 of 51 - Report No.: HB20240819010E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com 6 Photographs of the Test Setup Radiated Emission Below 1GHz Radiated Emission Above 1GHz - Page 45 of 51 - Report No.: HB20240819010E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Conducted Emission - Page 46 of 51 - Report No.: HB20240819010E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com 7 Photographs of the EUT Photo 1 Photo 2 - Page 47 of 51 - Report No.: HB20240819010E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Photo 3 Photo 4 - Page 48 of 51 - Report No.: HB20240819010E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Photo 5 Photo 6 - Page 49 of 51 - Report No.: HB20240819010E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Photo 7 Photo 8 - Page 50 of 51 - Report No.: HB20240819010E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Photo 9 Photo 10 - Page 51 of 51 - Report No.: HB20240819010E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Photo 11 Photo 12 ****…

Text truncated - open the document above for the full version.