2BGEI-FZCWF2LW-BWSmart Retrofit Recessed Downlight

Section Company n Address: R KONG SAR Product Na FCC ID: 2B Model(s): F FZCWD2LW FSPC996W 2.911(d)(5 ) We, [Brim a sought thro  Pro  Ide n Yours sinc e Name: han Title: FAE M Company n Signature: NOTE 1 “Covered List https://www.f c References; 1) 986446 D 0 https://apps.fc 2) Federal R e https://www.fe munications-s 2.911(d) name: Brima RM 705, 7/F, R, China ame: Smart BGEI-FZCW FZCWF2LW W-BW, FZC W-F2, FSPC )(i) Equipm ate (HK) Lim ough certific hibited from ntified as an erely, dy tan Manager name: Brima ”; is the List o cc.gov/supplyc 01 Covered Eq cc.gov/oetcf/kd egister docume ederalregister. supply-chain-t )(5)(i) Ce ate (HK) Lim FA YUEN C Retrofit Re WF2LW-BW W-BW, FZCW CWF2LW-BW C995W, FSP ment Type mited] (“the a cation is not m receiving n equipmen ate (HK) Lim of Equipment a chain/covered quipment v01 db/forms/FTS ent 2022-2826 gov/documen hrough-the Brimat ertificatio mited COMM BLD cessed Dow WF2LW, FZ W, FZCW22 PC994W applicant”) c t: an equipm e nt type in the mited and Services C list SearchResul t 63 published o nts/2023/02/06 te (HK) L on – Equi DG, 75-77, F wnlight ZCWA2LW-B 2LW-BW, FZ certify that t ent authoriz e “Covered Covered By S tPage.cfm?sw on 02/06/23 6/2022-28263/ Limited 2. ipment T FA YUEN S BW, FZCWB ZCW32LW- the equipm zation pursu List” NOTE 1 ection 2 of Th witch=P&id=32 /protecting-ag 911 (d)(5)(i) Eq Type STREET, MO B2LW-BW, -BW, FSPC ent for whic uant to § 2.9 e Secure Netw 5672 ainst-national - quipment Type A ONG KOK, FZCWC2L W C996W-F1, ch authoriza 903; of the F Date: Jun works Act, ava -security-threa Attestation v1.2 KLN HONG W-BW, ation is FCC rules. n. 25, 2024 ailable at ats-to-the-com 2 G m

Section Company n Address: R KONG SAR Product Na FCC ID: 2B Model(s): F FZCWD2LW FSPC996W 2.911(d)(5 ) We, [Brima the applica this chapte Yours sinc e Name: han Title: FAE M Company n Signature: NOTE 1 Delete option NOTE 2 “Covered List https://www.f c References; 1) 986446 D 0 https://apps.fc 2) Federal R e https://www.fe munications-s 2.911(d) name: Brima RM 705, 7/F, R, China ame: Smart BGEI-FZCW FZCWF2LW W-BW, FZC W-F2, FSPC )(ii) Applica ate (HK) Lim nt is not ide r, as an ent erely, dy tan Manager name: Brima not applicable ”; is the List o cc.gov/supplyc 01 Covered Eq cc.gov/oetcf/kd egister docume ederalregister. supply-chain-t )(5)(ii) Ce ate (HK) Lim FA YUEN C Retrofit Re WF2LW-BW W-BW, FZCW CWF2LW-BW C995W, FSP ant filing mited] (“the a entified NOTE tity producin ate (HK) Lim e to this applic of Equipment a chain/covered quipment v01 db/forms/FTS ent 2022-2826 gov/documen hrough-the Brimat ertificatio mited COMM BLD cessed Dow WF2LW, FZ W, FZCW22 PC994W applicant”) c E 1 on the “C ng covered mited cation. and Services C list SearchResul t 63 published o nts/2023/02/06 te (HK) L on – App DG, 75-77, F wnlight ZCWA2LW-B 2LW-BW, FZ certify that, Covered List communica Covered By S tPage.cfm?sw on 02/06/23 6/2022-28263/ Limited plicant (C FA YUEN S BW, FZCWB ZCW32LW- as of the d t” NOTE 2 ,esta ations equip ection 2 of Th witch=P&id=32 /protecting-ag 2.911 (d)(5 Covered L STREET, MO B2LW-BW, -BW, FSPC ate of the fi blished pu r pment. e Secure Netw 5672 ainst-national - 5)(ii) Applicant A List ) ONG KOK, FZCWC2L W C996W-F1, ling of the a rsuant to §1 Date: Ju n works Act, ava -security-threa Attestation v1.3 KLN HONG W-BW, application, .50002 of n. 25, 2024 ailable at ats-to-the-com 3 G m

Co m Ad d KLN Pr o Mo d FZC FSP Pr o We act We an d issu our Sig Na m Title Com mpany: Bri dress: RM N HONG KO oduct Name del Numbe CWC2LW-B PC996W-F1 oduct Desc authorize M on our beha declare tha d certificatio ues concern behalf shal nature: me: e: mpany: imate (HK) 705, 7/F, F A ONG SAR, e: Smart Re er(s): FZCW BW, FZCWD 1, FSPC996 ription: Sm MiCOM Lab alf on all ma at MiCOM L n of equipm ning the app ll have the s handy ta n FAE Mana Brimate (H Brim Agen Limited A YUEN CO China etrofit Rece WF2LW-BW D2LW-BW, 6W-F2, FSP mart Retrof bs Inc., 575 atters conce Labs Inc. is ment to the r proval applic same effect n ager HK) Limite mate (HK nt Auth OMM BLDG essed Dow W, FZCWF2L FZCWF2LW PC995W, FS it Recesse Boulder C o erning the c allowed to f regulatory a cation. Any t as acts of d K) Limit horizat G, 75-77, FA wnlight LW, FZCWA W-BW, FZC SPC994W d Downlig h ourt, Pleasa certification forward all i agencies as and all acts our own. ted tion A YUEN ST A2LW-BW, CW22LW-BW ht anton, Califo of above na information s required a s carried ou Date: TREET, MO FZCWB2LW W, FZCW32 ornia 94566 amed equip related to t nd to discu ut by MiCOM Jun. 25, 20 ONG KOK, W-BW, 2LW-BW, 6, USA, to pment. the approva ss any M Labs on 24 al

Office o Federa 7435 O Columb USA Subjec t FCC ID To Wh o Pursua are req u docume These d propriet might b In addi t in Title busine s authoriz For 4 O For 1 It is ou r corresp docume authoriz Sincer e Signatu Name: Title: F A of Engineeri l Communic Oakland Mills bia, MD 210 t; Request f D: 2BGEI-FZ om It May C nt to the pro uesting the ents from pu documents tary informa be harmful to Schemat Block Di Parts Lis Operatio Tune-up tional to abo 47 CFR §2 ss sensitive zed devices External Test Set Internal P User Ma 45 days, pu OR 180 days pu r understand pondence du ents and thi zation is iss ely, ure: handy tan AE Manage ing Techno cations Com s Road 046 for Confiden ZCWF2LW- Concern, ovisions of t Commissio ublic disclos contain det ation in ope o our comp tic Diagram agram st onal Descrip Procedure ove mention .803 and th informatio n s, we reque Photos tup Photos Photos anual rsuant to P u ursuantto KD ding that all uring the ce s informatio sued. er Brima logy mmission ntiality -BW the Commis on to withho sure indefin tailed syste ration of th e any and wo m ption ned docume e importatio n remains c st Short Te ublic Notice DB 726920 l measurem ertification re on will be av ate (HK) ssion’s rule old the follow nitely. m and equi e equipmen ould give co ents, in orde on rules in T confidential rm Confide e DA 04-170 0 D01. ment test rep eview proce vailable for ) Limited s Title 47 S wing attach pment desc nt. The publ ompetitors a er to comply Title 47 CFR until the act ntiality of th 05. ports, FCC ess cannot public revi e d Sections §0. hment(s) as criptions an ic disclosu r an unfair ad y with the m R §2.1204, tual market he following ID label for be granted ew once the Date: Jun. 457 and § 0 confidentia d are consi re of these d vantage in marketing re while ensu ting of newly attachmen mat and as confide n e grant of eq 25, 2024 0.459, we al dered as documents the market . egulations ring that y t(s); ntial quipment .

To W We, Mo d FZC F2, with Tes t Ple a Sig Na m Title Whom It May Brimate (HK del Number: CWD2LW-BW FSPC995W, product mod t sample mo ase contact m nature: me: h e: FA Mo y Concern, K) Limited (S FZCWF2LW W, FZCWF2L , FSPC994W del named d del: FZCWF me if you hav andy tan AE Manage Brim odel Di Smart Retrofit W-BW, FZCW LW-BW, FZC W; All model's ifferent. 2LW-BW. ve any quest r mate (HK fferenc t Recessed D WF2LW, FZCW CW22LW-BW s the function tion. K) Limit ce Dec Downlight); T WA2LW-BW W, FZCW32L n, software a ted claratio Trade Mark: W, FZCWB2L LW-BW, FSP and electric c Date: on XSKY; LW-BW, FZC PC996W-F1, circuit are the Jun. 25, 20 CWC2LW-BW FSPC996W e same, only 24 W, W-

FCC ID LABEL: Ca. 20mm x 40mm Label Location FCC ID: 2BGEI-FZCWF2LW-BW

MPE ESTIMATION FCC ID: 2BGEI-FZCWF2LW-BW 1, Limit for General Population/ Uncontrolled Exposures Frequency Power density (mW/ cm 2 ) Averaging time(minutes) 300MHz----1.5GHz F/1500 30 1.5GHz---100GHz 1.0 30 Note: F= Frequency in MHz 2, Estimation Result Frequency (MHz) Max PK Output power(dBm) Tune Up Power(dBm) Max Tune Up power(mW) Antenna Gain(dBi) Antenna Gain (numerical) MPE (mW/cm²) ZigBee 2480 2.13 2±1(3) 1.995 3.53 2.25 0.00090 Note: Note: The estimation distance is 20cm Note: PK Output power= conducted power. Conducted power see the test report HK2405112380-E, antenna gain= 3.53dBi When the minimum test separation distance is >20 cm, a distance of 20 cm is applied to determine RF Exposure test exclusion. The test exclusion threshold is 0.00090mW/cm² which is< 1.0mW/cm², RF Exposure testing is not required. -------The End-------

1/11 SPECIFICATION FOR APPROVAL CUSTOMER ： CUSTOMER’S P/N ： PART NUMBER ： WAN8010F245H05 DESCRIPTION ： Chip Antenna 8010 M-Ant 2.4~2.5G Type H05 VERSION ： V1.3 ISSUE DATE ： 2023/08/01 CUSTOMER APPROVED R&D CENTER APPROVAL CHECKED DRAWN Ray Tennyson Snow OneWave Electronic Co., Ltd. 1F, No. 151, Li Gong Street, Beitou District, Taipei City 112, Taiwan TEL:+886 2 2898-2220 FAX:+886 2 2898-5055 2/11 ONEWAVE TECHNOLOGY CO., LTD. 8010 Chip antenna For Bluetooth / WLAN Applications Dimension (mm) L 8.01 ± 0.20 W 1.03 ± 0.20 T 1.25 ± 0.20 W L T P/N: WAN8010F245H05 3/11 ONEWAVE TECHNOLOGY CO., LTD. Part Number Information WAN 8010 F 245 H 05 A B C D E F A Product Series Antenna B Dimension L x W 8.0X1.0mm (+-0.2mm) C Material High K material D Working Frequency 2.4 ~ 2.5GHz E Feeding mode Monopole & Single Feeding F Antenna type Type = 05 1. Electrical Specification Remark : Bandwidth & Peak Gain was measured under evaluation board of next page Specification Part Number WAN8010F245H05 Central Frequency 2450 MHz Bandwidth 100 (Min.) MHz Return Loss -10 (Max) dB Peak Gain 3.53 dBi Impedance 50 Ohm Operating Temperature -40～+110 °C Maximum Power 4 W Resistance to Soldering Heats 10 ( @ 260°C) sec. Polarization Linear Azimuth Beamwidth Omni-directional Termination Cu / Sn (Leadless) 4/11 ONEWAVE TECHNOLOGY CO., LTD. 2. Recommended PCB Pattern Evaluation Board Dimension Unit : mm Suggested Matching Circuit Important information: It is recommended to use highly accurate inductors ±0.1~0.3nH and capacitance ±0.1pF for matching components. 5/11 ONEWAVE TECHNOLOGY CO., LTD. ◆ Layout Dimensions in Clearance area( Size=10.0*5.0mm ) 50 ohm transmission Line Matching Circuit ◆ Layout Dimensions in Clearance area( Size=10.0*3.0mm ) 50 ohm transmission Line Matching Circuit FootPrint (Unit : mm) 6/11 ONEWAVE TECHNOLOGY CO., LTD. 3. Measurement Results Return Loss 7/11 ONEWAVE TECHNOLOGY CO., LTD. Radiation Pattern Efficiency Peak Gain Directivity 2400MHz 69.25 % 3.41 dBi 5.42 dBi 2450MHz 75.82 % 3.53 dBi 5.38 dBi 2500MHz 68.55 % 3.26 dBi 5.17 dBi Chamber Coordinate System Y Z X 8/11 ONEWAVE TECHNOLOGY CO., LTD. 4.Reliability and Test Condictions ITEM REQUIREMENTS TEST CONDITION Solderability 1. Wetting shall exceed 90% coverage 2. No visible mechanical damage Pre-heating temperature:150°C/60sec. Solder temperature:230±5°C Duration:4±1sec. Solder:Sn-Ag3.0-Cu0.5 Flux for lead free: rosin Solder heat Resistance 1. No visible mechanical damage 2. Central Freq. change :within ± 6% 10 ± 0.5 sec. 60 sec . . T E M P ( °C ) 150 °C 2 6 0 °C Pre-heating temperature:150°C/60sec. Solder temperature:260±5°C Duration:10±0.5sec. Solder:Sn-Ag3.0-Cu0.5 Flux for lead free: rosin Component Adhesion (Push test) 1. No visible mechanical damage The device should be reflow soldered(230±5°C for 10sec.) to a tinned copper substrate A dynometer force gauge should be applied the side of the component. The device must with-ST-F 0.5 Kg without failure of the termination attached to component. Component Adhesion (Pull test) 1. No visible mechanical damage Insert 10cm wire into the remaining open eye bend ,the ends of even wire lengths upward and wind together. Terminal shall not be remarkably damaged. Thermal shock 1. No visible mechanical damage 2. Central Freq. change :within ±6% Phase Temperature(°C) Time(min) 1 +110±5°C 30±3 2 Room Temperature Within 3sec 3 -40±2°C 30±3 4 Room Temperature Within 3sec +110°C=>30±3min -40°C=>30±3min Test cycle:10 cycles The chip shall be stabilized at normal condition for 2~3 hours before measuring. Resistance to High Temperature 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature: +110±5°C Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. Resistance to Low Temperature 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature:-40±5°C Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. Humidity 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature: 40±2°C Humidity: 90% to 95% RH Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. 4±1 sec. 60sec TEMP (°C) 150°C 230°C 9/11 ONEWAVE TECHNOLOGY CO., LTD. 5.Soldering and Mounting Mildly activated rosin fluxes are preferred. The minimum amount of solder can lead to damage from the stresses caused by the difference in coefficients of expansion between solder, chip and substrate. The terminations are suitable for all wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. Recommended temperature profiles for re-flow soldering in Figure 1. Products attachment with a soldering iron is discouraged due to the inherent process control limitations. In the event that a soldering iron must be employed the following precautions are recommended. ‧Preheat circuit and products to 150°C ‧Never contact the ceramic with the iron tip ‧Use a 20 watt soldering iron with tip diameter of 1.0mm ‧280°C tip temperature (max) ‧1.0mm tip diameter (max) ‧Limit soldering time to 3 sec. SOLDERING COOLING NATURAL PRE-HEATING TEMPERATURE(°C) 60~120 s 10s max. 30~60s 250~260 230 180 150 TIME(sec.) Reflow Soldering SOLDERING COOLING NATURAL PRE-HEATING TEMPERATURE(°C) within 3s Gradual cooling 150 TIME(sec.) Iron Soldering Over 60s 350 300 10/11 ONEWAVE TECHNOLOGY CO., LTD. 6.Packaging Information ◆ Tape Specification: W Ao Bo Ko P F E D D1 Po P2 t 16.0 ±0.30 1.30 ±0.10 8.30 ±0.10 1.40 ±0.10 4.00 ±0.10 7.50 ±0.10 1.75 ±0.10 1.50 ±0.10 0.00 ±0.10 4.00 ±0.10 2.00 ±0.10 0.30 ±0.05 ◆ Reel Specification: (7’’, Φ180 mm) Tape Width(mm) A(mm) B(mm) C(mm) D(mm) Chip/Reel(pcs) 16 16±1.0 60±2 13.5±0.5 178±2 3000 11/11 ONEWAVE TECHNOLOGY CO., LTD. 7.Storage and Transportation Informatio…

Text truncated - open the document above for the full version.

Page 1 of 43 Report No.: HK2405112380-E FCC Test Report Test Report On Behalf of Brimate (HK) Limited For Smart Retrofit Recessed Downlight Model No.: FZCWF2LW-BW, FZCWF2LW, FZCWA2LW-BW, FZCWB2LW-BW, FZCWC2LW-BW, FZCWD2LW-BW, FZCWF2LW-BW, FZCW22LW-BW, FZCW32LW-BW, FSPC996W-F1, FSPC996W-F2, FSPC995W, FSPC994W FCC ID: 2BGEI-FZCWF2LW-BW Prepared For: Brimate (HK) Limited RM 705, 7/F, FA YUEN COMM BLDG, 75-77, FA YUEN STREET, MONG KOK, KLN HONG KONG SAR, China Prepared By: Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: May 11, 2024 ~ Jun. 13, 2024 Date of Report: Jun. 13, 2024 Report Number: HK2405112380-E Page 2 of 43 Report No.: HK2405112380-E Test Result Certification Applicant’s Name ................... : Brimate (HK) Limited Address .................................... : RM 705, 7/F, FA YUEN COMM BLDG, 75-77, FA YUEN STREET, MONG KOK, KLN HONG KONG SAR, China Manufacturer's Name ............. : Shenzhen Feibit Electronic Technology Co.,Ltd Address .................................... : 14F, Building 2, Nanshan iPark Chongwen, 3370 Liuxian Avenue, Nanshan District, Shenzhen, China Product Description Trade Mark ................................. : XSKY Product Name ............................ : Smart Retrofit Recessed Downlight Model and/or Type Reference .. : FZCWF2LW-BW, FZCWF2LW, FZCWA2LW-BW, FZCWB2LW-BW, FZCWC2LW-BW, FZCWD2LW-BW, FZCWF2LW-BW, FZCW22LW-BW, FZCW32LW-BW, FSPC996W-F1, FSPC996W-F2, FSPC995W, FSPC994W Standards ................................ : 47 CFR FCC Part 15 Subpart C 15.247 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test .............................................. : Date (s) of Performance of Tests ............... : May 11, 2024 ~ Jun. 13, 2024 Date of Issue ............................................. : Jun. 13, 2024 Test Result ................................................. : Pass Testing Engineer Len Liao Technical Manager Sliver Wan Authorized Signatory Jason Zhou Page 3 of 43 Report No.: HK2405112380-E Contents Page 1 Test Summary ................................................................................................................................................ 6 1.1 Test Description ......................................................................................................................................... 6 1.2 Measurement Uncertainty ......................................................................................................................... 7 1.3 Information of the Test Laboratory ............................................................................................................ 7 2 General Information ....................................................................................................................................... 8 2.1 General Description of EUT ...................................................................................................................... 8 2.2 Carrier Frequency of Channels ................................................................................................................. 9 2.3 Operation of EUT during Testing ............................................................................................................... 9 2.4 Description of Test Conditions ................................................................................................................ 10 2.5 Description of Test Setup ........................................................................................................................ 11 2.6 Description of Support Units .................................................................................................................... 12 3 Equipments List for All Test Items ............................................................................................................. 13 4 Test Result .................................................................................................................................................... 14 4.1 Antenna Requirement.............................................................................................................................. 14 4.1.1 Standard Requirement ..................................................................................................................... 14 4.1.2 EUT Antenna ................................................................................................................................... 14 4.2 Conduction Emissions Measurement ...................................................................................................... 15 4.2.1 Applied Procedures / Limit ............................................................................................................... 15 4.2.2 Test Procedure ................................................................................................................................ 15 4.2.3 Test Setup ........................................................................................................................................ 16 4.2.4 Test Results ..................................................................................................................................... 17 4.3 Radiated Emissions Measurement .......................................................................................................... 19 4.3.1 Applied Procedures / Limit ..........................................................................................…

Text truncated - open the document above for the full version.

Test Model：FZCWF2LW-BW Radiated Emission Conducted Emission