2BGF3-T3725W Wireless Charger

Turn the vent knob counterclockwise to release the suction cup. Lift the side handle to detach the base from the suction surface. 1. After disassembly, store the bracket properly for future reuse. 2. Do not pull the bracket directly when the suction cup is not fully released to avoid damaging the product due to excessive force. Note: 2. Bracket Removal Dear Customer, thank you for purchasing this product. To help you better understand the product, please read this manual carefully before use. Enjoy your experience! Product Showcase 1. Bracket Installation Packing list 25W Wireless Charger Magnetic Ring Base Pad Alcohol Wipes Type-C Charging Cable Instruction Manual 1. On a clean, dust-free smooth surface (such as glass or a car dashboard display), firmly press the base to ensure a tight seal. Wireless Charging Area Type-C Charging port Support rod Exhaust knob Suction Cup Base X1 X1 X1 X1 X1 X1 25W Wireless Charger Note For use on non-smooth surfaces (such as car dashboards, tabletops, etc.), use a base pad: 1 Peel off the protective film from the base pad and attach it to a clean, dust-free surface. 2 Press around the edges of the base pad to ensure a tight seal, then leave it in place for 15 minutes. 2. Turn the knob clockwise to release excess air. Hearing a “click” indicates the bracket is securely locked. Special Note: Allow 24 hours after application for optimal adhesion. 3 Peel off the top protective film, then begin installing t he suction cup. After Pasting After Pasting m h 3. Adjust the magnetic suction area and support rod to the appropriate angle. 4. Magnetic-attached phones (or phone cases) can attach directly; others require installing a magnetic adapter ring first: 1 Clean the area on the back of the phone (or phone case) where the magnetic adapter ring will be installed. 2 Align the magnetic adapter ring with the target area and press firmly to secure it. How to install a magnetic ring? Other phones Adjust up and down Rotate left and right Metal RingMetal Ring oder Other cases 1. Do not install the magnetic ring on rough, uneven surfaces, silicone, leather, or other phone cases. 2. It is not recommended to install the magnetic ring inside the phone case to avoid weakening the magnetic attraction. Note After Pasting h 5. For optimal performance, wait 24 hours before use. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. 1. 2. 2. お客様各位、この度は本製品をお選びいただき誠にありがと うございます。製品をより深くご理解いただくため、ご使用前 にこの取扱説明書をよくお読みください。快適なご使用をお 祈り申し上げます 包装内容明細書 製品ショーケース 1.ブラケットの取り付け 真空磁気ワイヤレス充電 磁化リング ベースパッド アルコールパック Type-C充電ケーブル マニュアル 1.清潔で埃のない滑らかな表面（ガラスや車のインフォテイン メント ディスプレイなど）でベースをしっかりと押して、 しっかりと接着されていることを確認します。 ワイヤレス充電エリア Type-C充電ポート サポートロッド 排気ノブ 吸盤ベース X1 X1 X1 X1 X1 X1 真空吸着磁気ワイヤレス充電 ヒント 滑らかでない表面（車のダッシュボード、デスクトップなど） で使用する場合は、ベースパッドが必要です： 1 下部パッドの保護フィルムをはがし、清潔でほこりのな い表面に貼り付けます 2 底のパッドを端の周りに押してしっかりと固定し、15 分間放置します。 2.ノブを時計回りに回して余分な空気を排出します。 「カチッ」という音が鳴ればブラケットがロックされた ことが分かります。 特記事項: 最高の固定効果を得るには、貼り付けた後 24 時間放置してください。 3 上部の保護フィルムを剥がし、吸盤の取り付けを始めます。 貼り付けた後待つ 貼り付けた後待つ 分 時間 3.磁気吸着エリアとサポートロッドを適切な角度に調整します。 4.磁気機能付きの携帯電話（または携帯電話ケス）は直接 取り付けることができますが、その他の携帯電話では最初に磁気 リングを 取り付ける必要があります： ー 1 フェライト コアを取り付ける必要がある携帯電話 (または携 帯電話ケース) の背面の領域を清掃します。 2 磁気リングを対象部位に合わせ、しっかりと押して固定します。 最適な効果を得るには、 磁気誘導コイルの取り付け方法？ その他の携帯ケース 1.マグネットリングを、携帯電話のざらざらした表面や凹凸の ある表面、シリコン、革などの素材の上に取り付けないでください。 2. 磁気リングをスマートフォンケース内に設置することは、磁気 の吸引力が弱まるのを避けるため推奨されません。 注記 貼り付けた後待つ 時間 5.使用開始から24時間お待ちください。 Den Entlüftungsknopf gegen den Uhrzeigersinn drehen, um den Saugnapf zu lösen. An der seitlichen Griffleiste anheben, um die Basis von der Saugoberfläche zu lösen. 1. Nach der Demontage die Halterung ordnungsgemäß lagern, um sie für die Wiederverwendung vorzuhalten. 2. Die Halterung nicht direkt ziehen, wenn der Saugnapf nicht vollständig gelöst ist, um eine Beschädigung des Produkts durch übermäßige Kraft zu vermeiden. Hinweis 2. Halterung entfernen Sehr geehrter Kunde, vielen Dank für den Kauf dieses Produkts. Um Ihnen die Nutzung zu erleichtern, lesen Sie bitte vor der ersten Inbetriebnahme diese Anleitung sorgfältig durch. Wir wünschen Ihnen viel Freude mit dem Produkt! Packliste Produktpräsentation 1. Halterung montieren Vakuum-Magnet-Ladestation (drahtlos) Magnetring Basis-Pad / Unterlage Desinfektionstücher (Alkohol) Typ-C-Ladekabel Bedienungsanleitung 1. Auf einer sauberen, st…

Text truncated - open the document above for the full version.

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:16755CoyoteBushDrUnit84,SanDiego,CA92127UnitedStates FRN:0034562900 ContactName:YangyangXu TelephoneNo:(561)875-9826 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofShenzhenTengsayTechnologyCo.,Ltd TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:ShenzhenTengsayTechnologyCo.,Ltd ProductDescription:25WWirelessCharger FRN:0035433648 GranteeCode:2BGF3 FCCID:2BGF3-T37 ContactName:GuangmingHu Address:502,No.7,XikengSouthRoad,XikengCommunity,FuchengStreet,LonghuaDistrict, Shenzhen,China TelephoneNo:+8613590251849 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2026/03/03 Applicant’sName: ShenzhenTengsayTechnologyCo.,Ltd USAgentforServiceofProcess’sName: HOPEKCORPORATIONINC Title:ManagerTitle:Manager SignatureSignature

Rev 1/26/2023 Shenzhen Tengsay Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Mar. 03, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BGF3-T37 [Shenzhen Tengsay Technology Co., Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen Tengsay Technology Co., Ltd] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Guangming Hu Rev 1/26/2023 Shenzhen Tengsay Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Mar. 03, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BGF3-T37 [Shenzhen Tengsay Technology Co., Ltd] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Guangming Hu

深圳市秦知嘉电子科技有限公司 Shenzhen Qinzijia Electronic Technology Co., Ltd. 产 品 规 格 承 认 书 SPECIFICATION FOR APPROVAL ■产品形状和尺寸 Product Apperance & Dimensions (Unit: mm) ■产品电气特性 Product Electrical characteristics 参数 (Parameter)： 数值(Value) 产品名称（Product name） Wireless charging coil module 产品编号 (Product number)： Q4208R205T1165P-45K3MTY20 铁氧体型号 (Ferrite type)： Φ 42*Φ5*0.8mm(With rotten stuff) 线材型号 (Coil type)： Multi-strand enameled wire 0.08*65P 线圈匝数 (Coil Turns)： 11TS 绕线方向（Coil direction）: Clockwise (based on the outermost circle) 电感 (Inductance)： 8.1 μH ±10% 直流电阻 (DC Resistance)： 85 mΩ (Max.) 操作温度（Operating Temperature）： -20 °C ～ + 70 °C 测试仪器 (Testing Instrument)： TH2816B @100kHz、1Vrms、TH2512B At 25°C 备注（Note）： Attach 3M double-sided adhesive on the back of the product ■更多信息请咨询我们(Contact Us For More Information)。 电话（TEL）:15857396935 Ya ng：15857396936 ADD：No. 6015, Guangda Road, Guanshan Community, Yuanshan Subdistrict, Longgang District, Shenzhen City

Shenzhen Tengsay Technology Co., Ltd Family models declaration letter Mar. 03, 2026 We Shenzhen Tengsay Technology Co., Ltd Of 502, No.7, Xikeng South Road, Xikeng Community, Fucheng Street, Longhua District, Shenzhen, China Declare under our sole responsibility that the product FCC ID: 2BGF3-T37 Product: 25W Wireless Charger Model Number: T37, W6, T37S, X22, T38, T37A, T37B, T37C, T37D, T37E, T37F, T38S, T39, T39S, X19, X21, X23, J6, J9, T27, T27S All the models are the same circuit and module, except the appearance, colour and model No.. Guangming Hu/ Manager E-mail : [email protected] Phone : +86 13590251849 Fax : +86 13590251849 Address : 502, No.7, Xikeng South Road, Xikeng Community, Fucheng Street, Longhua District, Shenzhen, China

Shenzhen Tengsay Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 3, 2026 Subject; Request for Confidentiality FCC ID: 2BGF3-T37 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Guangming Hu Title: Manager

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Shenzhen Tengsay Technology Co., Ltd Date: Mar. 03, 2026 Product Model Number: T37, W6, T37S, X22, T38, T37A, T37B, T37C, T37D, T37E, T37F, T38S, T39, T39S, X19, X21, X23, J6, J9, T27, T27S FCC ID: 2BGF3-T37 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: +86 13590251849 On behalf of: Shenzhen Tengsay Technology Co., Ltd

Ext Photos Model: T37 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7

Label and Label Location Model: T37 FCC ID: 2BGF3-T37 4cm 1.2cm

Int Photos Model: T37 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 ANT

- Page 1 of 12 - Report No.: HB20260205005E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: 25W Wireless Charger Trade Mark: N/A Model Number: T37 FCC ID: 2BGF3-T37 Prepared for Shenzhen Tengsay Technology Co., Ltd 502, No.7, Xikeng South Road, Xikeng Community, Fucheng Street, Longhua District, Shenzhen, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 12 - Report No.: HB20260205005E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 7 2.1 TEST LABORATORY ..................................................................................................................................................... 7 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 2.4 TEST SOFTWARE ........................................................................................................................................................ 7 3 LIST OF TEST EQUIPMENT ................................................................................................................................ 8 4 RF EXPOSURE .................................................................................................................................................. 9 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 9 4.1.1. Limit ............................................................................................................................................................ 9 4.1.2. Test Procedures ........................................................................................................................................... 9 4.1.3. Test Setup .................................................................................................................................................... 9 4.1.4. Test Result ................................................................................................................................................... 9 5 PHOTOGRAPHS OF THE TEST SETUP............................................................................................................... 12 - Page 3 of 12 - Report No.: HB20260205005E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Tengsay Technology Co., Ltd Address ................................. : 502, No.7, Xikeng South Road, Xikeng Community, Fucheng Street, Longhua District, Shenzhen, China Manufacturer's Name .......... : Shenzhen Tengsay Technology Co., Ltd Address ................................. : 502, No.7, Xikeng South Road, Xikeng Community, Fucheng Street, Longhua District, Shenzhen, China Product description Product name ........................ : 25W Wireless Charger Model Number ....................... : T37 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Feb. 06, 2026~Mar. 03, 2026 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : ( G a r y L u) Authorized Signatory : (L e o S u) - Page 4 of 12 - Report No.: HB20260205005E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 Mar. 03, 2026 Original - Page 5 of …

Text truncated - open the document above for the full version.

- Page 1 of 31 - Report No.: HB20260205005E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: 25W Wireless Charger Trade Mark: N/A Model Number: T37 FCC ID: 2BGF3-T37 Prepared for Shenzhen Tengsay Technology Co., Ltd 502, No.7, Xikeng South Road, Xikeng Community, Fucheng Street, Longhua District, Shenzhen, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 31 - Report No.: HB20260205005E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 6 1.4 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 6 1.5 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................. 7 3 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 8 4 LIST OF TEST EQUIPMENT .............................................................................................................................. 10 5 TEST ITEM AND RESULTS ............................................................................................................................... 12 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 12 5.2 CONDUCTED EMISSION ............................................................................................................................................. 13 5.3 RADIATED EMISSION ................................................................................................................................................ 17 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 22 6 PHOTOGRAPHS OF THE TEST SETUP............................................................................................................... 24 7 PHOTOGRAPHS OF THE EUT .......................................................................................................................... 26 - Page 3 of 31 - Report No.: HB20260205005E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Tengsay Technology Co., Ltd Address ................................. : 502, No.7, Xikeng South Road, Xikeng Community, Fucheng Street, Longhua District, Shenzhen, China Manufacturer's Name .......... : Shenzhen Tengsay Technology Co., Ltd Address ................................. : 502, No.7, Xikeng South Road, Xikeng Community, Fucheng Street, Longhua District, Shenzhen, China Product description Product name ........................ : 25W Wireless Charger Model Number ....................... : T37 Standards ............................. : FCC Part 15C Test procedure ....................... : IEEE/ANSI C63.10-2020 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Feb. 06, 2026~Mar. 03, 2026 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : (G a r y L u) Authorized Signatory : (L e o S u) - Page 4 of 31 - Report No.: HB20260205005E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan R…

Text truncated - open the document above for the full version.

Photographs of the Test Setup Model: T37 Radiated Emission Below 30MHz Radiated Emission Above 30MHz Conducted Emission MPE