2BGFH-PWRWRLSFPDU

™ PAGE 2 OF 8 A PPh M4.8 x 22 S e l f Ta p p i n g 717937 B Under Mount Adapter 117942 C Side Mount Adapter 117941 D PPh M4.2 x 16 Self Tapping 717935 E Plastic-Head Thumb Screw 717918W F PhFHMS M3.5 x 0.6mm x 6mm Long 718122 PWR-AC —1x1x2x1x1x PWR-ACC —————— PWR-ACC-WRLS —————— PWR-STRP 4x————— PWR-ACC-STRP PWR-ACC-WRLS-STRP 4x————— PARTS LIST PAGE 3 OF 8 IMPORTANT SAFETY INSTRUCTIONS WARNING - Risk of Electric Shock, Fire, and Injury. To reduce the risks of burns, fire, electric shock, or injury to persons: • Always unplug this unit from the electrical outlet before installing or removing it. • Use only indoors. • Dry location use only. • Do not operate where aerosol (spray) products are being used or where oxygen is being administered. • Never operate this unit if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the furnishing to a service center for examination and repair. • Do not install this unit near heated surfaces/sources. • Do not open the unit due to risk of electric shock hazard. No user serviceable parts inside. • Never drop or insert any object into any opening. • Connect this unit to a properly grounded outlet/receptacle only. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. MPE Requirements To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. PAGE 4 OF 8 PWR-AC Features 1 USB-A charger port 1 USB-C charger port Can charge laptop up to 65 Watts Mount: Desk edge/surface mount, under mount, edge mount (Desk edge/surface mount: 0.5" - 1.75") Specifications Input: DC, 65W max from HAT Base Control Box Output: Single Port in Use: USB-C: QC2.0, QC3.0, PD3.0, PPS, 65W max USB-A: 5V/2A, 10W max Both Ports In Use: USB-C: 20V2.25A max USB-A: 5V2A max * Compatible with HAT bases only 123 8 45 67 F E B C D D HAT Base Control Box PAGE 5 OF 8 PWR-ACC Features 2 power receptacles 1 USB-A charger port 2 USB-C charger ports Can charge laptop up to 65 Watts Mount: Desk edge, 0.75" - 1.75" Conforms and tested to UL 962A and UL 1310 standards Tamper-resistant (TR) AC outlets Integrated circuit breaker Specifications Input: 125VAC, 60Hz, 15A max Output: AC Outlets (2): 120VAC, 60HZ, 15A max Single port use: USB-A: 5V3A, 9V2.A, 12V1.5, 18W max USB-C1: 5V/3A, 9V3A, 12V3A, 15V3A, 20V3.25A; PPS (3.3-11V4.05A, 3.3-16V3A, 65W max); PD3.0, APPLE2.4A, DCP1.5A, QC2.0/3.0, AFC USB-C2: 5V3A, 9V2.22A, 12V1.67A, 20W max Multi port use: USB-C1 + USB-C2: USB-C1 max 45W (5V3A, 9V3A, 12V3A, 15V2.67A, 20V2.25A); USB-C2 max 20W (5V3A, 9V2.22A, 12V1.67A) USB-C1 + USB-A: USB-C1 max 45W (5V3A, 9V3A, 12V3A, 15V2.67A, 20V2.25A); USB-A max 18W (5V3A, 9V2.A, 12V1.5, 18W max) USB-C2 + USB-A: Both share 15W USB-C1 + USB-C2 + USB-A: USB-C1 max 45W (5V3A, 9V3A, 12V3A, 15V2.67A, 20V2.25A); USB-C2 & USB-A share 15W PAGE 6 OF 8 PWR-ACC-WRLS Features 2 power receptacles 1 USB-A charger port 2 USB-C charger ports Can charge laptop up to 65 Watts Fast wireless charging Mount: Desk edge, 0.75" - 1.75" Conforms and tested to UL 962A and UL 1310 standards Tamper-resistant (TR) AC outlets Integrated circuit breaker Specifications Input: 125VAC, 60Hz, 15A max Output: AC Outlets (2): 120VAC, 60HZ, 15A max Single port use: USB-A: 5V3A, 9V2.A, 12V1.5, 18W max USB-C1: 5V/3A, 9V3A, 12V3A, 15V3A, 20V3.25A; PPS (3.3-11V4.05A, 3.3-16V3A, 65W max), PD3.0, APPLE2.4A, DCP1.5A, QC2.0/3.0, AFC USB-C2: 5V3A, 9V2.22A, 12V1.67A, 20W max Multi port use: USB-C1 + USB-C2: USB-C1 max 45W (5V3A, 9V3A, 12V3A, 15V2.67A, 20V2.25A); USB-C2 max 20W (5V3A, 9V2.22A, 12V1.67A); USB-C1 + USB-A : USB-C1 max 45W (5V3A, 9V3A, 12V3A, 15V2.67A, 20V2.25A); USB-A max 18W (5V3A, 9V2.A, 12V1.5, 18W max) USB-C2 + USB-A : Both share 15W USB-C1 + USB-C2 + USB-A : USB-C1 max 45W (5V3A, 9V3A, 12V3A, 15V2.67A, 20V2.25A); USB-C2 & USB-A share 15W; Wireless Charging: 5W, 7.5W, 10W, 15W (auto detection) PAGE 7 OF 8 PWR-STRP Features 6 power receptacles Conforms and tested to UL 962A and UL 498 standards Tamper-resistant (TR) AC outlets Integrated circuit breaker Specifications Input: 125VAC, 60Hz, 15A max Output: AC Outlets (6): 120VAC, 60HZ, 15A max A PAGE 8 OF 8 PWR-ACC-STRP PWR-ACC-WRLS-STRP Features Power Strip: 6 power receptacles Power Module: 2 power receptacles 1 USB-A charger port 2 USB-C charger ports Can charge laptop up to 65 Watts Fast wireless charging* Conforms and tested to…

Text truncated - open the document above for the full version.

FCC ID:2BGFH-PWRWRLS External Photos FCC ID:2BGFH-PWRWRLS PWR-ACC-WRLS-STRP FCC ID:2BGFH-PWRWRLS FCC ID:2BGFH-PWRWRLS PWR-ACC-WRLS

FCC ID:2BGFH-PWRWRLS Internal Photos FCC ID:2BGFH-PWRWRLS PWR-ACC-WRLS-STRP FCC ID:2BGFH-PWRWRLS Antenna FCC ID:2BGFH-PWRWRLS FCC ID:2BGFH-PWRWRLS FCC ID:2BGFH-PWRWRLS PWR-ACC-WRLS FCC ID:2BGFH-PWRWRLS Antenna FCC ID:2BGFH-PWRWRLS FCC ID:2BGFH-PWRWRLS

Human Active Technology, LLC MPE ASSESSMENT REPORT Report Type: FCC MPE assessment report Model: PWR-ACC-WRLS, PWR-ACC-WRLS-STRP REPORT NUMBER: 240300858SHA-002 ISSUE DATE: June 27, 2024 DOCUMENT CONTROL NUMBER: TTRFFCCMPE-02_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRFFCCMPE-02_V1© 2018 Intertek Page 2 of 10 Report no.: 240300858SHA-002 Applicant : Human Active Technology, LLC 100 Kuebler Rd, Easton, Pennsylvania, 18040, United States Manufacturer : Shanghai Arex Electronics Co., Ltd No. 789 Jiaxin Road Jiading Area Shanghai, China|201818 Factory : Shanghai Arex Electronics Co., Ltd No. 789 Jiaxin Road Jiading Area Shanghai, China|201818 FCC ID : 2BGFH-PWRWRLS SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: FCC PART 1 SECTION 1.1310 KDB447498 D01 General RF Exposure Guidance v06 KDB 680106 D01 RF Exposure Wireless Charging Apps v04 PREPARED BY: REVIEWED BY: Justin Wu Wakeyou Wang Project Engineer Reviewer Report No.: 240300858SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 3 of 10 Revision History Report No. Version Description Issued Date 240300858SHA-002 Rev. 01 Initial issue of report June 27, 2024 Report No.: 240300858SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 4 of 10 Measurement result summary TEST ITEM FCC REFERENCE TEST RESULT NOTE RF Exposure 1.1310 Pass - Notes: 1: NA =Not Applicable 2: Determination of the test conclusion is based on IEC Guide 115 in consideration of measurement uncertainty. 3: Additions, Deviations and Exclusions from Standards: None. Report No.: 240300858SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 5 of 10 1 GENERAL INFORMATION 1.1 Description of Equipment Under Test (EUT) Product name: FPDU Type/Model: PWR-ACC-WRLS, PWR-ACC-WRLS-STRP Description of EUT: The EUT is a smart socket outlet which supports Wireless Charger function. There are two models in all. Their electrical structure is the same, the only difference is that one of the products with an additional direct plug check. We test model PWR-ACC-WRLS-STRP and list the wors data in this report. Rating: PWR-ACC-WRLS: 125V,15A,60Hz, total:65W max, USB-C1 output:5V3A,9V3A,12V3A15V3A,20V3.25A;65W max, USB-C2 output:5V3A,9V2.22A,12V1.67A;20W max, USB-A output:5V3A,9V2A,12V1.5A;18W max Wireless charging: QI 5W,7.5W,15W(max) PWR-ACC-WRLS-STRP: PWR-STR-125V,15A,60Hz;PWR-ACC- 125V,12A,60Hz, USB-C1 output:5V3A,9V3A,12V3A,15V3A,20V3.25A;65W max, USB-C2 output:5V3A, 9V2.22A, 12V1.67A;20W max, USB-A output: 5V3A, 9V2A, 12V1.5A; 18W Wireless charging: QI 5W, 7.5W, 15W(max) Total:65W max Category of EUT: Class B EUT type: Tabletop Floor standing Software Version: / Hardware Version: / Sample number: A240319-22 Sample received date: March 19, 2024 Date of test: April 10-April 26, 2024 1.2 Technical Specification Frequency Range: 111kHz – 205kHz Modulation: FSK Antenna: Coil antenna Report No.: 240300858SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 6 of 10 1.3 Description of Test Facility Name: Intertek Testing Services Shanghai Address: Building 86, No. 1198 Qinzhou Road (North), Shanghai 200233, P.R. China Telephone: 86 21 61278200 Telefax: 86 21 54262353 The test facility is recognized, certified, or accredited by these organizations: CNAS Accreditation Lab Registration No. CNAS L0139 FCC Accredited Lab Designation Number: CN0175 IC Registration Lab CAB identifier.: CN0014 VCCI Registration Lab Member No: 3598 (Registration No.: R-14243, G-10845, C-14723, T-12252) A2LA Accreditation Lab Certificate Number: 3309.02 Report No.: 240300858SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 7 of 10 2 TEST SPECIFICATIONS 2.1 Standards or specification FCC PART 1 SECTION 1.1310 KDB 680106 D01 RF Exposure Wireless Charging Apps v04 KDB447498 D01 General RF Exposure Guidance v06 2.2 Mode of operation during the test Within this test report, EUT was tested under all modes and tested under its rating voltage and frequency. Other voltage and frequency are specified if used. The worst data was listed in the report. 2.3 Test peripherals list Item No. Name Brand and Model Description 1 Wireless load iphone 15 100% power level 2 Wireless load iphone 15 50% power level 3 Wireless load iphone 15 0% power level 2.4 Record of climatic conditions Test Item Temperature (°C) Relative Humidity (%) Pressure (kPa) RF Exposure 23 52 101 Report No.: 240300858SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 8 of 10 2.5 Instrument list Used Equipment Manufacturer Type Internal no. Due date Exposure Level Tester Narda NBM-550 EC 6113 2024-10-07 E-Field sensor(100kHz- 3GHz) Narda EF 0391 EC 6113 2024-10-07 H-Field sensor(300kHz- 30MHz) Narda HF 3061 EC 6113 2024-10-07 Exposure Level Tester(1Hz- 400kHz) Narda ELT-400 EC 2928 2024-10-02 Report No.: 240300858SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 9 of 10 3 RF Exposure Assessment Test result: Pass 3.1 Assessment Li…

Text truncated - open the document above for the full version.

Human Active Technology, LLC RF TEST REPORT Report Type: FCC Part 15C RF report Model: PWR-ACC-WRLS, PWR-ACC-WRLS-STRP REPORT NUMBER: 240300858SHA-001 ISSUE DATE: June 27, 2024 DOCUMENT CONTROL NUMBER: TTRFFCCPART15C_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRFFCCPART15C_V1 © 2018 Intertek Page 2 of 21 Report no.: 240300858SHA-001 Applicant : Human Active Technology, LLC 100 Kuebler Rd, Easton, Pennsylvania, 18040, United States Manufacturer : Shanghai Arex Electronics Co., Ltd No. 789 Jiaxin Road Jiading District Shanghai, China|201818 Factory : Shanghai Arex Electronics Co., Ltd No. 789 Jiaxin Road Jiading District Shanghai , China|201818 FCC ID : 2BGFH-PWRWRLS SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: 47CFR Part 15 (2023): Radio Frequency Devices (Subpart C) ANSI C63.10 (2020): American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices PREPARED BY: REVIEWED BY: Justin Wu Wakeyou Wang Project Engineer Reviewer Report No.: 240300858SHA-001 TEST REPORT TTRFFCCPART15C_V1 © 2018 Intertek Page 3 of 21 Content REVISION HISTORY................................................................................................................................................ 4 MEASUREMENT RESULT SUMMARY ..................................................................................................................... 5 1 GENERAL INFORMATION ............................................................................................................................. 6 1.1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ..................................................................................................... 6 1.2 TECHNICAL SPECIFICATION .................................................................................................................................... 6 1.3 DESCRIPTION OF TEST FACILITY .............................................................................................................................. 7 2 TEST SPECIFICATIONS ................................................................................................................................... 8 2.1 STANDARDS OR SPECIFICATION ............................................................................................................................... 8 2.2 MODE OF OPERATION DURING THE TEST ................................................................................................................... 8 2.3 TEST SOFTWARE LIST ............................................................................................................................................ 8 2.4 TEST PERIPHERALS LIST ......................................................................................................................................... 8 2.5 TEST ENVIRONMENT CONDITION: ............................................................................................................................ 8 2.6 INSTRUMENT LIST ................................................................................................................................................ 9 2.7 MEASUREMENT UNCERTAINTY ............................................................................................................................. 10 3 RADIATED EMISSIONS. .............................................................................................................................. 11 3.1 LIMIT .............................................................................................................................................................. 11 3.2 MEASUREMENT PROCEDURE ............................................................................................................................... 11 3.3 TEST CONFIGURATION ........................................................................................................................................ 12 3.4 TEST RESULTS OF RADIATED EMISSIONS ................................................................................................................. 14 4 CONDUCTED EMISSIONS. .......................................................................................................................... 18 4.1 LIMIT .............................................................................................................................................................. 18 4.2 TEST CONFIGURATION ........................................................................................................................................ 18 4.3 MEASUREMENT PROCEDURE ............................................................................................................................... 19 4.4 TEST RESULTS OF CONDUCTED EMISSIONS ..................................................................................................…

Text truncated - open the document above for the full version.

Declaration Letter Related FCC ID: 2BGFH-PWRWRLS All measurements for PWR-ACC-WRLS-STRP were performed radiated and therefore additional antenna gain documentation is not required for PWR-ACC-WRLS-STRP. See internal photo for details of the antenna for PWR-ACC-WRLS-STRP. By: ______________ ________Justin Wu______ (Signature) (Print name) Title: ____Certification Engineer________ Company: ____Intertek Testing Services Shanghai________

FCC ID:2BGFH-PWRWRLS Test Setup Photos FCC ID:2BGFH-PWRWRLS 1. Radiated Emission Below 30MHz Below 1GHz FCC ID:2BGFH-PWRWRLS 2. Conduct Emission FCC ID:2BGFH-PWRWRLS 3. RF Exposure FCC ID:2BGFH-PWRWRLS