2BGJ5-Q103camera

Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter This equipment complies with FCC exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: REP America LLC FRN: 0034192500 Contact Name: Ben XU Address: Address: 6510 S Academy Blvd, Ste A #523, Colorado Springs, CO 80906 Telephone No: 719 201 3314 Email: [email protected] Applicant: Company name: Shenzhen Mengtai Biotechnology Co., Ltd. Product Description: camera Grantee code: 2BGJ5 FCC ID: 2BGJ5-Q103 FRN： 0035456128 Contact Name: Wang Jia Address: A1902, No. 2, Longguan West Road, Gaofeng Community, Dalang Street, Longhua District, Shenzhen Telephone No: 13537731640 Fax No: / Email: [email protected] [Shenzhen Mengtai Biotechnology Co., Ltd.] certifies that, as of the date of this filing of the application with the TCB, [REP America LLC] is our designated US agent for service of process for the above referenced FCC ID. [Shenzhen Mengtai Biotechnology Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [REP America LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicantis aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2024/06/11 Applicant’s Name: Wang Jia US Agent’s Name: Ben XU Title: PM Title: President Signature Signature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen Mengtai Biotechnology Co., Ltd. Grantee code: 2BGJ5 FRN: 0035456128 FCC ID: 2BGJ5-Q103 Contact Name: Wang Jia Address: A1902, No. 2, Longguan West Road, Gaofeng Community, Dalang Street, Longhua District, Shenzhen Telephone No: 13537731640 Fax No: / Email: [email protected] i. [Shenzhen Mengtai Biotechnology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Shenzhen Mengtai Biotechnology Co., Ltd.]] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not](as a specifically named entity or any of its subsidiaries or affiliates)identified on the Covered List as an entity producing “covered” equipment. Theapplicantmustsignthiscertification. [Shenzhen Mengtai Biotechnology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of theapplication, the applicant [is not] identified on the Covered List as an entity producing “covered”equipment . Date: 2024/06/11 Applicant’s Name: Wang Jia Title: PM Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Shenzhen Mengtai Biotechnology Co., Ltd. Product Similarity Declaration Product name: camera Model name: Q103, Q101, Q102, Q104, Q105, Q106, Q107, Q108, Q109, Q110, Q111, Q112, Q113, Q114, Q115, Q116, Q117, Q118, Q119, Q120, ZY101, ZY102, ZY103, ZY104,ZY105, ZY106, ZY107, ZY108, ZY109, ZY110, ZY111,ZY112, ZY113, ZY114, ZY115, ZY116, ZY117, ZY118, ZY119, ZY200 FCC ID: 2BGJ5-Q103 We (Shenzhen Mengtai Biotechnology Co., Ltd.) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Signature: Name: : Wang Jia Date: 2024-06-11 Title: PM Signature of applicant:

C5266091_X8_Ed.1 1/1 Letter of Authorization Shenzhen Mengtai Biotechnology Co., Ltd. Company: Shenzhen Mengtai Biotechnology Co., Ltd. Address: A1902, No. 2, Longguan West Road, Gaofeng Community, Dalang Street, Longhua District, Shenzhen Product Name: camera Model Number: Q103, Q101, Q102, Q104, Q105, Q106, Q107, Q108, Q109, Q110, Q111, Q112, Q113, Q114, Q115, Q116, Q117, Q118, Q119, Q120, ZY101, ZY102, ZY103, ZY104, ZY105, ZY106, ZY107, ZY108, ZY109, ZY110, ZY111, ZY112, ZY113, ZY114, ZY115, ZY116, ZY117, ZY118, ZY119, ZY200 FCC Identifier: 2BGJ5-Q103 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Signature: Name: : Wang Jia Date: 2024-06-11 Title: PM Signature of applicant:

C5266091_X10_Ed.2 1/1 Shenzhen Mengtai Biotechnology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-06-11 Subject: Request for Confidentiality FCC ID: 2BGJ5-Q103 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ■☐ Schematics ■☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ■ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long‐Term Confidentiality may be permitted under special conditions (See II. LONG‐TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short‐Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Signature: Name: : Wang Jia Date: 2024-06-11 Title: PM Signature of applicant:

Page 1 of 7 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn FCC ID:2BGJ5‐Q103 External Photos Page 2 of 7 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn Page 3 of 7 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn Label&location Page 4 of 7 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn Page 5 of 7 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn only decorative Page 6 of 7 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn Label&location Page 7 of 7 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn

FCC ID LABELING AND LOCATION FCC ID Label camera Model NO.: Q103 FCC ID: 2BGJ5-Q103 FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Page 1 of 7 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn FCC ID: 2BGJ5‐Q103 Internal Photos Page 2 of 7 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn Page 3 of 7 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn Page 4 of 7 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn Page 5 of 7 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn External Antenna Page 6 of 7 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn only decorative Page 7 of 7 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn

FCC ID:2BGJ5-Q103 RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1091，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation Remark：1. wifi2.4G Antenna gain is 2.58dBi The Max Calc. Thresholds : 0.0181≤ 1 So a SAR test is not required Modulation Frequenc y MHz Output power to antenna (dBm) Target power W/toler ance (dBm） Max Output power to antenna (dBm) Max Output power to antenna (mW) Power Density at R=20cm (mW/cm2) Limit (mW/c m2) Result WIFI 2.4G 802.11b 2412 16.75 16±1 17 50.119 0.0181 1.0 PASS 2437 16.88 16±1 17 50.119 0.0181 1.0 PASS 2462 16.57 16±1 17 50.119 0.0181 1.0 PASS 802.11g 2412 14.24 14±1 15 31.623 0.0114 1.0 PASS 2437 15.52 15±1 16 39.811 0.0143 1.0 PASS 2462 15.13 15±1 16 39.811 0.0143 1.0 PASS 802.11n (HT20) 2412 13.62 13±1 14 25.119 0.0090 1.0 PASS 2437 14.58 14±1 15 31.623 0.0114 1.0 PASS 2462 13.95 13±1 14 25.119 0.0090 1.0 PASS 802.11n (HT40) 2422 13.12 13±1 14 25.119 0.0090 1.0 PASS 2437 13.55 13±1 14 25.119 0.0090 1.0 PASS 2452 13.85 13±1 14 25.119 0.0090 1.0 PASS

Huizhou Donzhi Electronics Co., Ltd FOR APPROVAL Customer Shenzhen Zhiyun IOT Co., Ltd. Part NO. Part Name Minions 2DB antenna (white) Pat Models Manufacturer Confirmation Column Confirmation seal Prepared by Reviewed by Approved by LIU Haohua Customer Recognition Column Recognition seal Tested by Reviewed by Approved by Address: 6/F, Building C, Longsheng Science Park, No.11 Huancheng Road, Qiuchang Town, Huiyang District, Huizhou City, Guangdong Province Tel.: 0752-3886801 13823769366 Fax: 0752-3588817 E-mail: [email protected] R e v. Change Date V1.0 First edition 3/26/2020 Indication of unmarked tolerances: Product Name Minions 2.5DB antenna Approved by Huizhou Donzhi Electronics Co., Ltd 0–25 ±0.05 Frequency 2400–2500 MHZ Reviewed by LUO Gujian 25.01–50 ±0.10 Impedance 50 Ω Prepared by LIU Haohua View 50.01–100 ±0.15 Standing Wave Ratio ≤1.5 dB Rev. V1.0 Date 3/26/2020 Technical Specifications: 1. The plastic should be intact; 2. The terminal should withstand a tensile force of 5KG; 3. The upper tin should be smooth; 4. The internal knot should not be exposed. 100.01–200 ±0.25 Gain 2.5DBI Scale 1:1 Page 1 / 1 200.01–300 ±0.30 Enclosure Material ABS Path Unit MM Huizhou Donzhi Electronics Co., Ltd WiFi Antenna Passive Test Data Freq (MHz) Efficiency (%) 2400 77.94 2410 80.23 2420 81.42 2430 80.35 2440 79.22 2450 78.16 2460 76.75 2470 74.75 2480 74.06 2490 74.06 2500 74.37 Freq (MHz) Max (dB) 2400 1 2410 1.28 2420 1.23 2430 0.92 2440 0.62 2450 0.59 2460 0.43 2470 -0.02 2480 0.09 2490 -0.05 2500 0.02 Benefit Frequency (MHz) Gain (dBi) Efficiency (dB) Efficiency (%) 2400 2.19 -1.08 77.94 2410 2.63 -0.96 80.23 2420 2.49 -0.89 81.42 2430 2.58 -0.95 80.35 2440 2.45 -1.01 79.22 2450 2.22 -1.07 78.16 2460 2.23 -1.15 76.75 2470 1.94 -1.26 74.75 2480 1.92 -1.3 74.06 2490 1.8 -1.3 74.06 2500 1.85 -1.29 74.37 Gain Phi (°) Freq (MHz) Max (dB) Theta (°) Freq (MHz) MaxMin (dB) 0 2400 1.64 90 2400 2.01 0 2410 1.93 90 2410 2.03 0 2420 1.84 90 2420 1.97 0 2430 1.7 90 2430 2.23 0 2440 1.59 90 2440 2.27 0 2450 1.54 90 2450 2.41 0 2460 1.25 90 2460 2.49 0 2470 0.87 90 2470 2.08 0 2480 0.69 90 2480 2.13 0 2490 0.52 90 2490 2.19 0 2500 0.44 90 2500 2.18 3D drawing Huizhou Donzhi Electronics Co., Ltd I. Product Parameters Product Name: 2.4G Minions antenna Mechanical Performance Indicators Size: 104*9.5 mm Wire length: 150 mm Material: 1. ABS 2. Copper pipe 3. IPEX Gen-I terminal Color: White Operating temperature: -20°C ± 85°C Electrical Performance Indicators Frequency range: 2400–2500 MHZ Polarization type: Vertical Impedance: 50 Ω Radiation direction: Omni-directional Standing wave ratio: ≤ 1.5 Operating voltage: 5 V Gain: 2.5DBI Bandwidth: 100 MHZ II. Product Picture

FCC TEST REPORT FCC ID:2BGJ5-Q103 Product : camera Model Name : Q103, Q101, Q102, Q104, Q105, Q106, Q107, Q108, Q109, Q110, Q111, Q112, Q113, Q114, Q115, Q116, Q117, Q118, Q119, Q120, ZY101, ZY102, ZY103, ZY104, ZY105, ZY106, ZY107, ZY108, ZY109, ZY110, ZY111, ZY112, ZY113, ZY114, ZY115, ZY116, ZY117, ZY118, ZY119, ZY200 Brand : N/A Report No. : NCT24021295E Prepared for Shenzhen Mengtai Biotechnology Co., Ltd. A1902, No. 2, Longguan West Road, Gaofeng Community, Dalang Street, Longhua District, Shenzhen Prepared by Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, People’s Republic of China TEL: 400-8868-419 FAX: 86-755-27790922 Report No.: NCT24021295E Page 2 of 65 Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn 1 TEST RESULT CERTIFICATION Applicant : Shenzhen Mengtai Biotechnology Co., Ltd. Address : A1902, No. 2, Longguan West Road, Gaofeng Community, Dalang Street, Longhua District, Shenzhen Manufacturer : Shenzhen Mengtai Biotechnology Co., Ltd. Address : A1902, No. 2, Longguan West Road, Gaofeng Community, Dalang Street, Longhua District, Shenzhen Product name : camera Model name : Q103, Q101, Q102, Q104, Q105, Q106, Q107, Q108, Q109, Q110, Q111, Q112, Q113, Q114, Q115, Q116, Q117, Q118, Q119, Q120, ZY101, ZY102, ZY103, ZY104, ZY105, ZY106, ZY107, ZY108, ZY109, ZY110, ZY111, ZY112, ZY113, ZY114, ZY115, ZY116, ZY117, ZY118, ZY119, ZY200 Standards : FCC CFR47 Part 15 Section 15.247 Test procedure : ANSI C63.10:2013 Date of test : May 08, 2024- May 22, 2024 Date of Issue : May 22, 2024 This device described above has been tested by NCT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of NCT, this document may be altered or revised by NCT, personal only, and shall be noted in the revision of the document. Test Engineer: Keven Wu / Engineer Technical Manager: Henry Wang / Manager Report No.: NCT24021295E Page 3 of 65 Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn Contents Page 1 TEST RESULT CERTIFICATION .............................................................................................................................. 2 2 TEST SUMMARY ......................................................................................................................................................... 5 3 GENERAL INFORMATION ........................................................................................................................................ 6 3.1 GENERAL DESCRIPTION OF E.U.T. .................................................................................................................... 6 3.2 CHANNEL LIST .................................................................................................................................................... 7 3.3 TEST SITE ........................................................................................................................................................... 8 3.4 TEST SETUP CONFIGURATION ........................................................................................................................... 9 3.5 TEST MODE ........................................................................................................................................................ 9 4 EQUIPMENT DURING TEST ................................................................................................................................... 10 4.1 EQUIPMENTS LIST ............................................................................................................................................ 10 4.2 MEASUREMENT UNCERTAINTY ......................................................................................................................... 12 4.3 DESCRIPTION OF SUPPORT UNITS ................................................................................................................... 12 5 CONDUCTED EMISSION ......................................................................................................................................... 13 5.1 E.U.T. OPERATION ........................................................................................................................................... 13 5.2 EUT SETUP ...................................................................................................................................................... 13 5.3 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................................. 14 5.4 MEASUREMENT PROCEDURE ........................................................................................................................... 14 5.5 CONDUCTED EMISSION LIMIT ........................................................................................................................... 14 5.6 MEASUREMENT DESCRIPTION .......................................................................................................................... 14 5.7 CONDUCTED EMISSION TEST RESULT ............................................................................................................. 14 6 RADIATED SPURIOUS EMISSIONS ..................................................................................................................... 17 6.1 EUT OPERATION .............................................................................................................................................. 17 6.2 TEST SETUP ..................................................................................................................................................... 18 6.3 SPECTRUM ANALYZER SETUP ......................................................................…

Text truncated - open the document above for the full version.

Page 1 of 2 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn FCC ID: 2BGJ5‐Q103 Test Photo Page 2 of 2 Shenzhen NCT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China Hotline: 400-8868-419 Fax: 86-755-27790922 http://www.ncttesting.cn