2BGK9PEL900915 MHz Module

2655 Collier Canyon Road Livermore, CA 94551 (ph) 888-512-0490 www.PelicanWireless.Com Section 2.911(d)(5)(i) Certification – Equipment Type Company Name: Pelican Ventures LLC Address: 2655 Collier Canyon Rd, Livermore, California, 94551 USA Product Name: 915 MHz Module FCC ID: 2BGK9PEL900 Model(s): 45-5105 2.911(d)(5)(i) Equipment Type We, Pelican Ventures LLC (“the applicant”), certify that the equipment for which authorization is sought through certification is not: Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name:Steven Willens Date: 10 July 2024 Title and Company name: President / Pelican Ventures LLC NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm? switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the- communications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

2655 Collier Canyon Road Livermore, CA 94551 (ph) 888-512-0490 www.PelicanWireless.Com Section 2.911(d)(5)(ii) Certification – Applicant (Covered List) Company Name: Pelican Ventures LLC Address: 2655 Collier Canyon Rd, Livermore, California, 94551 USA Product Name: 915 MHz Module FCC ID: 2BGK9PEL900 Model(s): 45-5105 2.911(d)(5)(ii) Applicant filing We, Pelican Ventures (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name:Steven Willens Date: 10 July 2024 Title and Company name: President / Pelican Ventures LLC NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm? switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the- communications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

2655 Collier Canyon Road Livermore, CA 94551 (ph) 888-512-0490 www.PelicanWireless.Com Section 2.911(d)(7) USA Agent for Service of Process Company Name: Pelican Ventures LLC Address: 2655 Collier Canyon Rd, Livermore, California, 94551 USA Product Name: 915 MHz Module FCC ID: 2BGK9PEL900 Model(s): 45-5105 2.911(d)(7) USA Designated Agent for Service of Process We, Pelican Ventures LLC (“the applicant”) designate Pelican Ventures LLC NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company Name: same as Applicant USA Address: FRN Number Contact Name: Telephone No: Email: Applicant Company Name: Pelican Ventures LLC Address: 2655 Collier Canyon Rd, Livermore, California, 94551 USA Grantee FRN Number: 0019464197 FCC Grantee Code: 2BGK9 Contact Name: Steven Willens Telephone No: 925-399-1198 Email: [email protected] 2.911 (d)(7)USA Agent v1.5 Signature: Title: Signature: Title: President Date:Date: 10 July 2024 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against- national-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.5

2655 Collier Canyon Road Livermore, CA 94551 (ph) 888-512-0490 www.PelicanWireless.Com Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 31 May 2024 Subject; Modular Transmitter Application Company Name: Pelican Ventures LLC FCC ID: 2BGK9PEL900 Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;- FCC KDB 996369 D01 ‘Module Certification Guide v04; and FCC KDB 996369 D03 OEM Manual v01r01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v04’. FCC ID 2BGK9PEL900 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. The module is fully shielded by a copper layer embedded in the PCB and a full metal shield soldered to the PCB covering all components. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. The module’s RF sections are driven by an on- board controller which directly controls the RF data lines and operates so as to not allow excessive modulation, thereby complying with this requirement. The module must contain power supply regulation on the module. The module has integrated switching power supplies to regulate power. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). The module has an industry standard U.FL connector for antenna attachment. It is marketed to use a single antenna, World Products model no WPANT10174-S1A. The module must demonstrate compliance in a stand-alone configuration. The module has been tested to be compliant in a stand-alone configuration using supporting test equipment. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). The FCC ID is affixed to the module with a label on the top of the shield. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. This is achieved through documentation on the user manual. The module must comply with RF exposure requirements This is achieved through documentation in the user manual. Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01r01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements; KDB Ref Sect Requirements of KDB 996369 D03User Manual Page Number reference 2.2List of applicable FCC rules10 2.3Summarize the specific operational use conditions1,5 2.4Limited module proceduresN/A 2.5Trace antenna designsN/A 2.6RF exposure considerations2 2.7Antennas5-7 2.8Label and compliance information2 2.9Information on test modes and additional testing requirements 10 2.10Additional testing, Part 15 Subpart B disclaimer10 Name:Steven WillensDate: 31May 2024 Title:President

2655 Collier Canyon Road Livermore, CA 94551 (ph) 888-512-0490 www.PelicanWireless.Com Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 31 May 2024 Subject; Request for Confidentiality FCC ID: 2BGK9PEL900 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Steven Willens Title: President

2655 Collier Canyon Road Livermore, CA 94551 (ph) 888-512-0490 (fx) 925-426-1222 www.PelicanWireless.Com Letter of Authorization Company: Pelican Ventures LLC Address: 2655 Collier Canyon Rd, Livermore, California, 94511 USA Product Name: 915 MHz Module Model Number(s): 45-5105 Product Description: 915 MHz Module We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:Date:31 May 2024 Name:Steven Willens Title:President Company:Pelican Ventures LLC, dba Pelican Wireless Systems

1.00” 1.125”

MPE/RF EXPOSURE EVALUATION REPORT FCC CFR 47 Part 1.1310 Report No.: PELC01-U3 Rev A Company: Pelican Wireless Systems Model Name: 915 MHz Module Model Number: 45-5105 MPE/RF EXPOSURE EVALUATION REPORT Company: Pelican Wireless Systems Model Name: 915 MHz Module Model Number: 45-5105 To: FCC CFR 47 Part 1.1310 Test Report Serial No.: PELC01-U3 Rev A This report supersedes: NONE Applicant: Pelican Wireless Systems 2655 Collier Canyon Rd Livermore, CA 94551 USA Issue Date: 8th May 2024 This Test Report is Issued Under the Authority of: MiCOM Labs, Inc. 575 Boulder Court Pleasanton California 94566 USA Phone: +1 (925) 462-0304 Fax: +1 (925) 462-0306 www.micomlabs.com MiCOM Labs is an ISO 17025 Accredited Testing Laboratory Title: Pelican Wireless Systems 915 MHz Module To: FCC CFR 47 Part 1.1310 Serial #: PELC01-U3 Rev A Issue Date: 8th May 2024 Page: 3 of 4 This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com 1. MAXIMUM PERMISSABLE EXPOSURE Calculations for Maximum Permissible Exposure Levels Power Density = Pd (mW/cm 2 ) = EIRP/(4*π*d 2 ) EIRP = P * G P = Peak output power (mW) G = Antenna numeric gain (numeric) d = Separation distance (cm) Numeric Gain = 10 ^ (G (dBi)/10) The calculations in the table below use the highest conducted power values together with the highest antenna gain specified for the EUT. These calculations represent worst case in terms of the exposure levels. Frequency Band (MHz) Ant Gain (dBi) Numeric Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Calculated Power Density (mW/cm 2 ) @ 20cm Power Density Limit (mW/cm 2 ) Min Calculated safe distance for Limit (cm) 902.0 - 928.0 1.0 1.26 23.82 240.99 0.0604 0.61 6.34 Note: for mobile or fixed location transmitters the minimum separation distance is 20cm, even if calculations indicate the MPE distance to be less. Specification - Maximum Permissible Exposure Limits The Limit is defined in Table 1 of FCC §1.1310. Table 1 to § 1.1310(e)(1)—Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (ii) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) <30 1.34-30 824/f 2.19/f *(180/f 2 ) <30 30-300 27.5 0.073 0.2 <30 300-1,500 f/1500 <30 1,500-100,000 1.0 <30 575 Boulder Court Pleasanton, California 94566, USA Tel: +1 (925) 462 0304 Fax: +1 (925) 462 0306 www.micomlabs.com

45-5105 900 MHz Transceiver Module Antenna Gain The 45-5105 module has a 50Ω ultra miniature coaxial (U.FL) connector to connect to an external 900 MHz antenna. Modular certification was performed with the World Products WPANT10174-S1A antenna. See FIGURE 1-4 through 1-9 for antenna gain information. FIGURE 1-4 FIGURE 1-5 FIGURE 1-6 FIGURE 1-7 FIGURE 1-8 FIGURE 1-9

REGULATORY COMPLIANCE TEST REPORT FCC Part 15 Subpart C 15.247 (DTS) ISED RSS-247 Issue 3 Report No.: PELC01-U2 Rev A Company: Pelican Wireless Systems Model Name: 915 MHz Module REGULATORY COMPLIANCE TEST REPORT Company Name: Pelican Wireless Systems Model Name: 915 MHz Module To: FCC Part 15 Subpart C 15.247 (DTS) & ISED RSS-247 Issue 3 Test Report Serial No.: PELC01-U2 Rev A This report supersedes: NONE Applicant: Pelican Wireless Systems 2655 Collier Canyon Rd Livermore, CA 94551 United States of America Issue Date: 8th May 2024 This Test Report is Issued Under the Authority of: MiCOM Labs, Inc. 575 Boulder Court Pleasanton California 94566 USA Phone: +1 (925) 462-0304 Fax: +1 (925) 462-0306 www.micomlabs.com MiCOM Labs is an ISO 17025 Accredited Testing Laboratory Title: Pelican Wireless Systems 915 MHz Module To: FCC Part 15.247 (DTS), ISED 15-247 Issue 3 Serial #: PELC01-U2 Rev A Issue Date: 8th May 2024 Page: 3 of 55 This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. All changes will be noted in the Document History section of the report. MiCOM Labs, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: +1 (925) 462 0304, Fax: +1 (925) 462 0306, www.micomlabs.com Table of Contents 1. ACCREDITATION, LISTINGS & RECOGNITION................................................................................. 4 1.1. TESTING ACCREDITATION ......................................................................................................... 4 1.2. RECOGNITION ............................................................................................................................. 5 1.3. PRODUCT CERTIFICATION ........................................................................................................ 6 2. DOCUMENT HISTORY ......................................................................................................................... 7 3. TEST RESULT CERTIFICATE .............................................................................................................. 8 4. REFERENCES AND MEASUREMENT UNCERTAINTY ..................................................................... 9 4.1. Normative References ................................................................................................................... 9 4.2. Test and Uncertainty Procedure .................................................................................................. 10 5. PRODUCT DETAILS AND TEST CONFIGURATIONS ...................................................................... 11 5.1. Technical Details ......................................................................................................................... 11 5.2. Scope Of Test Program ............................................................................................................... 12 5.3. Equipment Model(s) and Serial Number(s) ................................................................................. 13 5.4. Antenna Details ........................................................................................................................... 13 5.5. Cabling and I/O Ports .................................................................................................................. 14 5.6. Test Configurations...................................................................................................................... 14 5.7. Equipment Modifications ............................................................................................................. 14 5.8. Deviations from the Test Standard .............................................................................................. 14 6. TEST SUMMARY ................................................................................................................................ 15 7. TEST EQUIPMENT CONFIGURATION(S) ......................................................................................... 16 7.1. Radiated Emissions ..................................................................................................................... 16 7.2 Conducted Emissions ................................................................................................................... 19 8. MEASUREMENT AND PRESENTATION OF TEST DATA ............................................................... 20 9. TEST RESULTS .................................................................................................................................. 21 9.1. Radiated Emissions ..................................................................................................................... 21 9.1.1. TX Spurious & Restricted Band Emissions ........................................................................... 23 9.1.2 RX Spurious Emissions ......................................................................................................... 30 9.2 Conducted Emissions ................................................................................................................... 32 9.2.1 6 dB & 99% Bandwidth .......................................................................................................... 32 9.2.2 Conducted Output Power ....................................................................................................... 34 9.2.3 Power Spectral Density .......................................................................................................... 37 9.2.4 Conducted Spurious Emissions ............................................................................................. 39 9.2.5 Conducted Band-Edge Emissions ......................................................................................... 41 A. APPENDIX – GRAPHICAL IMAGES ................................................................................................. 43 A.1 6dB & 99% Bandwidth ...................................................…

Text truncated - open the document above for the full version.