Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 1 | 9 | 400 MHz - 406 MHz | 25 W | 11K0F3E | 2.5ppm |
| 2 | 9 | 400 MHz - 406 MHz | 25 W | 7K60F1E | 2.5ppm |
| 3 | 9 | 400 MHz - 406 MHz | 25 W | 7K60F1D | 2.5ppm |
| 4 | 9 | 406.1 MHz - 470 MHz | 25 W | 11K0F3E | 2.5ppm |
| 5 | 9 | 406.1 MHz - 470 MHz | 25 W | 7K60F1E | 2.5ppm |
| 6 | 9 | 406.1 MHz - 470 MHz | 25 W | 7K60F1D | 2.5ppm |
Grant NotesOutput power listed is Maximum rated conducted. Minimum output setting is 10 W. This device must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled Exposure limit. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. The antennas used for this transmitter must be mounted and must be installed to provide the configurations and separation distances of at least 30 cm as described in this filing. RF exposure compliance was evaluated using a 0dBi antenna.