2BGT4-STEPRPROSTEPR PRO Stair Climber

PRO+ Tap. Zoom. Rotate with official interactive instructions on the BILT app. USER MANUAL PROPER USAGE GROUNDING METHODS FCC INFORMATION PARTS LIST ASSEMBLY EXPLODED DRAWING CLASS SCREEN MOVING THE STEPR WARNINGS AND SAFETY INFORMATION 02 14 29 28 25 26 30 10 13 1 IMPORTANT SAFETY INSTRUCTION! DANGER – To reduce the risk of electric shock: WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons: Always unplug the STEPR from the electrical outlet immediately after using and before cleaning. When using the STEPR, basic precautions should always be followed, including the following: Read all instructions before using the STEPR. The STEPR should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. Use the STEPR only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. Never operate the STEPR if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the STEPR to a service center for examination and repair. Keep the cord away from heated surfaces. Never operate the STEPR with the air openings blocked. Keep the air openings free of lint, hair, and alike items. 1. 1. 2. 3. 4. 5. 2 The specifications of the STEPR may vary slightly from the illustrations and are subject to change without notice. SAVE THESE INSTRUCTIONS 7. 6. 10. 8. 11. 12. 9. Never drop or insert any object into any opening. Do not use outdoors. Do not operate where aerosol (spray) the STEPRs are being used or where oxygen is being administered. To disconnect, turn the STEPR off, then remove the plug from the outlet. Connect the STEPR to a properly grounded outlet only. See grounding instructions. The STEPR is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the STEPR by a person responsible for their safety. Keep children under the age of 13 away from the STEPR. Do not carry the STEPR by supply cord or use cord as a handle. IMPORTANT SAFETY INSTRUCTION! 3 There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the STEPR could have parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the STEPR, the assembly instructions must be reviewed and corrective actions should be taken. Never operate the STEPR if it has a damaged cord or plug, if it is not working properly, if it has been damaged, or immersed in water. When emergency happens, take away the “emergent stop button” immediately. There is a certain risk of too fast speed, it is recommended that users do not use too fast speed directly after starting the STEPR. Manufacturer ： STEPR Pty Ltd ADD:2 Activity Crescent ,Molendinar, Queensland 4214, AUSTRALIA WARNING 4 Caution: Read the assembly instruction carefully, follow the instruction when assemble. Read all instructions carefully before using the STEPR. Retain this owner’s manual for future reference: Before starting any exercise program, consult with your physician or health professional. Check all the bolts locked. Never put the STEPR in the wetness area, or it will cause troubles. We take no responsibility for any troubles or hurts due to above reasons. Dress sport clothes and shoes before running. Do not do exercise in 40 minutes after meal. To prevent hurts, please warm up before exercise. Consult with doctor before exercise if you have high blood pressure. The STEPR is only used for adults and indoor using. Provide the olds, children and handicapped with good care, guide and supervision. Do not plug anything into any parts of The STEPR, or it may damage. Do not connect line to the middle of cable; do not lengthen cable or change the cable plug; do not put any heavy thing on cable or put the cable near the heat source; forbid using socket with several holes, these may cause fire or people may be hurt by the power. Cut off the power when the STEPR is not used. When the power is cut off , do not pull the power line to keep the wire unbroken. Maximum weight of user: 400lbs (180kgs). 1. 4. 9. 2. 7. 5. 10. 3. 8. 6. 11. 12. 13. 14. 5 ATTENTION Pulse monitor data may not be accurate, can not be used for medicine. Over-exercise may cause injury, even death. If you have a feeling of dizziness, sickness or other abnormal symptoms, please stop training and consult a doctor immediately. The class of the STEPR is：SC That injuries to health may result from incorrect or excessive training. The STEPR can be used by children aged from 14 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the STEPR in a safe way and understand the hazards involved. ATTENTION 15. 16. 17. 6 A warning notice to the effect that the safety level of the STEPR can be maintained only if it is examined regularly for damage and wear, e.g. ropes, pulleys, connection points; An advice to replace defective components immediately and/or keep the STEPR out of use until repair; Special attention to components most susceptible to wear. Care and, if applicable, maintenance advice shall be provided with each piece of the equipment. The advice shall include at least: a. b. c. CARE AND MAINTENANCE If you experience any kind of pain, including but not limited to chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing. When exercising, always maintain a comfortable pace. Do not wear clothes that might catch on any part of the STEPR. Always wear athletic shoes wh…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name STEPR Pty Ltd Address 2 Activity Crescent, Molendinar, 4214, Australia FRN 0035517705 Grantee Code 2BGT4 FCC ID 2BGT4-STEPRPRO Authorized Contact Name Dan Alenaddaf Contact Email [email protected] Contact Phone +61 416192811 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List STEPR Pty Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. STEPR Pty Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: Date: 2024/6/12 Print Name: Dan Alenaddaf Title: Co-Founder *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

STEPRPty Ltd U.S.Agent Designationfor Serviceof Process (Applicant andU.S.Agentare Separate Parties) TO:FederalCommunicationsCommission 7435 OaklandMillsRoad Columbia,MD 21046 ATTENTION: FCCCertification– Section 2.911(d)(7)Information DesignatedU.S.Agent CompanyName:United Consulting Technology ServicesCo.,Ltd. FRN:0033495714 ContactName:DavidWu Street Address: 17800CASTLETON STSTE665 CITYOF INDUSTRYCA 91748 United States TelephoneNo: (626) 217-4022 Email:[email protected] This letteris to confirmthat we (“ the DesignatedU.S.Agent) have accepted theresponsibilityto act as the DesignatedU.S.Agentfor ServiceofProcessas requiredbysection 47CFR2.911(d)(7)onbehalfof the Applicantnotedbelow. U. S. AgentSignature: Date:2024/8/1 Signed by(PrintedName/Title):DavidWu/CEO The Applicant acknowledges that they must maintain an agentfor no less than one year after terminating all m arketing and importationOR the conclusionof any Commission-related proceedinginvolvingthe equipment.The applicant further acknowledges theirresponsibilityto inform theFCCwhenever the DesignatedU.S.Agent informationabovechanges. Applicant Company name:STEPR PtyLtd FRN:0035517705 GranteeCode:2BGT4 FCCID: 2BGT4-STEPRPRO ContactName:Dan Alenaddaf Street Address:2 ActivityCrescent City/Province/Zip:Molendinar, -, 4214 TelephoneNo: +61 416192811 Email:[email protected] Applicant Signature: Date: 2024/8/1 Signedby (PrintedName/Title): Dan Alenaddaf/ Co-Founder

STEPR Pty Ltd Authority letter FCC Date: 2024/6/12 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2BGT4-STEPRPRO To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Bonnie Liao in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with applicant company FCC. This authorization is valid until further written notice from the applicant. Name (Printed): Dan Alenaddaf Title: Co-Founder Signature: On behalf of Company: STEPR Pty Ltd

STEPR Pty Ltd Confidential letter FCC To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: STEPR Pty Ltd 2 Activity Crescent, Molendinar, 4214, Australia Regarding: Confidentiality Request regarding application for FCC ID: 2BGT4-STEPRPRO LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Name (Printed): Dan Alenaddaf Title: Co-Founder Signature: On behalf of Company: STEPR Pty Ltd

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 1 of 11 Appendix - External Photos for GZCR2402000161HS SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 2 of 11 EUT Constructional Details (EUT Photos) For model: STEPR-PRO-H SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 3 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 4 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 5 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 6 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 7 of 11 For model: STEPR-PRO-CL SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 8 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 9 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 10 of 11 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 11 of 11 - End of the Appendix -

Product Name:STEPR PRO Stair Climber Model:STEPR-PRO-CL IC:32401-STEPRPRO S/N: FCC ID:2BGT4-STEPRPRO Trade Mark:STEPR This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN-ICE S-3(B)/NMB-3(B) Contains FCC ID: 2AOO6-WLT5283M Contains IC: 26141-WLT5283M Product Name:STEPR PRO Stair Climber Model:STEPR-PRO-H IC:32401-STEPRPRO S/N: FCC ID:2BGT4-STEPRPRO Trade Mark:STEPR This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN-ICE S-3(B)/NMB-3(B) Contains FCC ID: 2AL6KBL-M8821CS1 Contains FCC ID: 2AXTXBT-ZYLY-D Contains IC: 30864-BTZYLYD Contains IC: 20944-BLM8821CS1

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 1 of 33 Appendix _Internal Photos for GZCR2402000161HS SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 2 of 33 EUT Constructional Details (EUT Photos) For model: STEPR-PRO-H SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 3 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 4 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 5 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 6 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 7 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 8 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 9 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 10 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 11 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 12 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 13 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 14 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 15 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 16 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 17 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 18 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 19 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 20 of 33 For model: STEPR-PRO-CL SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 21 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 22 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 23 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 24 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 25 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 26 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 27 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 28 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 29 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 30 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 31 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 32 of 33 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-01 Rev 1.1 Page: 33 of 33 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR240200016103 Page: 1 of 15 FCC ID: 2BGT4-STEPRPRO Ricky Liu Manager TEST REPORT Application No.: GZCR2402000161HS Applicant:STEPR Pty Ltd Address of Applicant:2 Activity Crescent, Molendinar, Queensland 4214, AUSTRALIA Manufacturer:STEPR Inc Address of Manufacturer:300 Delaware Ave. Suite 210 #524, Wilmington, DE 19801 United States. Factory:Xiamen K-power Sports Co., Ltd Address of Factory:1333 Tonghui Nan Road, Tong'An, Xiamen, Fujian, China Product Name:STEPR PRO Stair Climber Model No.: STEPR-PRO-CL, STEPR-PRO-H   Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Trade Mark: Standard(s) : 47 CFR Part 1.1310 KDB 680106 D01 Wireless Power Transfer v04 KDB 447498 D01 General RF Exposure Guidance v06 Date of Receipt: 2024-02-06 Date of Test: 2024-04-12 Date of Issue: 2024-06-28 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR240200016103 Page: 2 of 15 Revision Record VersionReport No.DateRemark 01GZCR2402000161032024-06-28Original Authorized for issue by: Luke Lin/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR240200016103 Page: 3 of 15 2Test Summary Radio Spectrum Matter Part ItemStandardMethodRequirementResult Magnetic field strength 47 CFR Part 1.1310 KDB 680106 D01 47 CFR Part 1.1310 & KDB 680106 D01 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section.  Declaration of EUT Family Grouping: Model No.: STEPR-PRO-CL, STEPR-PRO-H According to the declaration from the applicant, the difference between models STEPR-PRO-CL and STEPR-PRO-H is display and wireless function. STEPR-PRO-H (Marked as M1) has TFT display which integrate Wi-Fi, Bluetooth Classic and WPC functions. STEPR-PRO-CL (Marked as M2) has LED display which integrate Bluetooth LE and WPC functions. Models STEPR-PRO-H and STEPR-PRO-CL have same WPC function. Therefore, only model M1: STEPR-PRO-H (M1) was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR240200016103 Page: 4 of 15 3Contents Page 1Cover Page...............................................................................................................................................1 2Test Summary..........................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................5 4.1Details of E.U.T.................................................................................................................................5 4.2Description of Support Units..............................................................................................................5 4.3Measurement Uncertainty.................................................................................................................5 4.4Test Location.....................................................................................................................................5 4.5Test Facility.......................................................................................................................................6 4.6Deviation from Standards..................................................................................................................6 4.7Abnormalities from Standard Conditions...........................................................................................6 5Equipment List.........................................................................................................................................7 6Radio Spectrum Matter Test Results.....................................................................................................8 6.1Magnetic field strength......................................................................................................................8 6.1.1E.U.T. Operation...........................................................................................................................8 6.1.2Test Mode Description..................................................................................................................9 6.1.3Test Setup Diagram......................................................................................................................9 6.1.4Measurement Procedure and Data.............................................................................................10 7Test Setup Photo....................................................................................................................................14 8EUT Constructional Details (EUT Photos)...........................................................................................15 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR240200016103 Page: 5 of 15 4General Information 4.1Details of E.U.T. Power supply:AC 100-240V, 50/60Hz Test voltage: AC 120V, 60Hz Cable(s):AC mains, 3 wires, 1.8m, unshielded. USB 2.0 Port x1 for charging function. Micro USB Port x1 for charging function. Operation frequency:112.18 kHz to 148.693 kHz Modulation type:Load Modulation Antenna Type:Loop Antenna Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR240200016102 Page: 1 of 28 FCC ID: 2BGT4-STEPRPRO Jerry Chan Manager TEST REPORT Application No.: GZCR2402000161HS Applicant:STEPR Pty Ltd Address of Applicant:2 Activity Crescent, Molendinar, Queensland 4214, AUSTRALIA Manufacturer:STEPR Inc Address of Manufacturer:300 Delaware Ave. Suite 210 #524, Wilmington, DE 19801 United States. Factory:Xiamen K-power Sports Co., Ltd Address of Factory:1333 Tonghui Nan Road, Tong'An, Xiamen, Fujian, China Product Name:STEPR PRO Stair Climber Model No.: STEPR-PRO-CL, STEPR-PRO-H   Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Trade Mark: Standard(s) : 47 CFR Part 15, Subpart C Date of Receipt: 2024-02-06 Date of Test: 2024-03-29 to 2024-04-22 Date of Issue: 2024-06-28 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR240200016102 Page: 2 of 28 Revision Record VersionReport No.DateRemark 01GZCR2402000161022024-06-28Original Authorized for issue by: Luke Lin/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR240200016102 Page: 3 of 28 2Test Summary Radio Spectrum Technical Requirement ItemStandardMethodRequirementResult Antenna Requirement 47 CFR Part 15, Subpart C N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part ItemStandardMethodRequirementResult 20dB Bandwidth ANSI C63.10 (2013) Section 6.9.2 47 CFR Part 15, Subpart C 15.215 Pass Conducted Emissions at AC Mains Power Port (150kHz-30MHz) ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Restricted Bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 Pass Radiated Emissions (9kHz-30MHz) ANSI C63.10 (2013) Section 6.4 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Emissions (30MHz-1GHz) 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section.  Declaration of EUT Family Grouping: Model No.: STEPR-PRO-CL, STEPR-PRO-H According to the declaration from the applicant, the difference between models STEPR-PRO-CL and STEPR-PRO-H is display and wireless function. STEPR-PRO-H (Marked as M1) has TFT display which integrate Wi-Fi, Bluetooth Classic and WPC functions. STEPR-PRO-CL (Marked as M2) has LED display which integrate Bluetooth LE and WPC functions. Models STEPR-PRO-H and STEPR-PRO-CL have same WPC function. Therefore, only model STEPR-PRO-H (M1) was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR240200016102 Page: 4 of 28 3Contents Page 1Cover Page...............................................................................................................................................1 2Test Summary............................................................................................................................................3 3Contents.....................................................................................................................................................4 4General Information...................................................................................................................................6 4.1Details of E.U.T...................................................................................................................................6 4.2Description of Support Units................................................................................................................6 4.3Measurement Uncertainty...................................................................................................................6 4.4Test Location.......................................................................................................................................6 4.5Test Facility.........................................................................................................................................7 4.6Deviation from Standards....................................................................................................................7 4.7Abnormalities from Standard Conditions.............................................................................................7 5Equipment List...........................................................................................................................................8 …

Text truncated - open the document above for the full version.