2BGTUSCREENCONNScreen Connect

SCREEN CONNECT USER MANUAL 21929-00-Seac Computer Screen CONNECT PRINT-totale.indb 121929-00-Seac Computer Screen CONNECT PRINT-totale.indb 103/07/26 15:0303/07/26 15:03 2 Italiano ...........................................................3 English ...........................................................19 Français ........................................................37 Espanol .........................................................55 Deutsch ........................................................73 Polskie ...........................................................91 يبرع ...............................................................109 21929-00-Seac Computer Screen CONNECT PRINT-totale.indb 221929-00-Seac Computer Screen CONNECT PRINT-totale.indb 203/07/26 15:0303/07/26 15:03 SCREEN CONNECT 3 MANUALE SCREEN CONNECT Congratulazioni per aver acquistato un computer SEAC per immersioni subacquee. Il computer per immersioni Screen Connect SEAC è uno strumento tecnologicamente avanzato, progettato e realizzato per fornire tutte le informazioni necessarie ad ogni subacqueo. • ATTENZIONE! Il manuale utente completo è scaricabile gratuitamente dal sito www.seacsub.com. AVVERTENZE GENERALI • ATTENZIONE! Per la propria sicurezza e per il corretto uso del prodotto, scaricare dal sito www.seacsub.com e leggere interamente il manuale utente completo prima di utilizzare il computer SEAC. Controllate periodicamente sul sito www.seacsub.com la presenza di eventuali aggiornamenti del manuale completo Screen Connect. • ATTENZIONE! Un impiego scorretto renderà nulla la garanzia e potrebbe causare danni permanenti al computer. • ATTENZIONE! Utilizzare il computer da immersione solo dopo aver letto il manuale d’istruzioni in tutte le sue parti e averne compreso il suo funzionamento. • ATTENZIONE! Il computer subacqueo non sostituisce una formazione subacquea e dovrebbe essere utilizzato solamente da subacquei che siano stati opportunamente addestrati ed abbiano ottenuto il relativo brevetto rilasciato da una Associazione Didattica Certificata. • ATTENZIONE! Il computer non sostituisce l’apprendimento della tabella di decompressione, che va sempre portata con sé in immersione per sicurezza, insieme a profondimetro, manometro ed orologio subacqueo. 21929-00-Seac Computer Screen CONNECT PRINT-totale.indb 321929-00-Seac Computer Screen CONNECT PRINT-totale.indb 303/07/26 15:0303/07/26 15:03 4 • ATTENZIONE! Il computer SEAC è uno strumento ausiliario all’immersione, pertanto è indispensabile avere sempre con sé una tabella adeguata per poter effettuare la fase di decompressione in caso di malfunzionamento dell’unità. • ATTENZIONE! L’immersione subacquea in apnea comporta rischi di sincope, taravana, edema polmonare ed emottisi, mentre l’immersione subacquea con autorespiratore comporta rischi relativi a malattia da decompressione, tossicità dell’ossigeno, narcosi da azoto ed, in generale, ad altri rischi connessi all’immersione stessa: anche l’attenta lettura del seguente manuale ed utilizzo dello strumento non esclude i potenziali pericoli. • ATTENZIONE! Il computer non è in grado di tenere conto di variazioni fisiologiche individuali che possono cambiare di giorno in giorno, per questo motivo è buona pratica utilizzare lo strumento in maniera conservativa e cautelativa, rimanendo entro i limiti indicati dal computer al fine di minimizzare i rischi. • ATTENZIONE! Evitare assolutamente di immergersi in apnea nelle 12 ore successive ad un’immersione con autorespiratore! Questa violazione potrebbe aumentare considerevolmente il rischio di MDD. • ATTENZIONE! Non condividere un unico computer per due subacquei durante le immersioni, ognuno deve avere il proprio strumento, per fornire informazioni e memorizzare esclusivamente i propri dati. • ATTENZIONE! Prima dell’immersione è necessario verificare lo stato della batteria, NON immergersi se sul display l’icona di batteria scarica è accesa, controllare sempre che il display non presenti segni di mal funzionamenti e che sia ben leggibile. L’icona della Batteria su display è definita da 2 segmenti: 21929-00-Seac Computer Screen CONNECT PRINT-totale.indb 421929-00-Seac Computer Screen CONNECT PRINT-totale.indb 403/07/26 15:0303/07/26 15:03 SCREEN CONNECT 5 Segmento 1: Contorno della Batteria ==> Batteria inferiore a Tensione Minima (non immergersi). Segmento 2: Prima Barra dal basso ==> Batteria inferiore a 2.1V (Livello basso, la tensione potrebbe crollare in caso di immersione in acque particolarmente fredde). • ATTENZIONE! Controllare sempre che le impostazioni siano corrispondenti a quelle desiderate e non lasciare che il computer sia manipolato da altri prima dell’immersione. Nel caso sia stato manipolato controllare che le impostazioni siano corrette. • ATTENZIONE! Bisogna tenere presente che il proprio fisico ha delle variazioni anche giornaliere di cui il computer non può tenere conto. Se la propria condizione fisica non è ottimale oppure se si avvertono problemi fisici, evitare di immergersi! • ATTENZIONE! Le normali funzioni del Prodotto potrebbero essere disturbate da forti interferenze elettromagnetiche. In tal caso, riavviare semplicemente il prodotto per riprendere il normale funzionamento seguendo le indicazioni del presente manuale di istruzioni (vedere “Reset”) ed utilizzare il prodotto in un’altra posizione. • ATTENZIONE! Evitare assolutamente di fare pressione con le dita sulla griglia laterale del sensore, specialmente se il vano del sensore è pieno di acqua, poiché questa operazione potrebbe falsare la misura dello zero e quindi potrebbe risultare una non corretta misura della profondità in caso di immersione successiva, con conseguenza che anche i dati di NDL/Deco potrebbero non essere precisi. Nel caso che nella modalità DIVE si notasse una misura diversa da zero in superficie, è necessario effettuare un reset per azzerare anche la misura del sensore (vedere istruzioni e warning sull’utilizzo del RESET di seguito in questo manuale) oppu…

Text truncated - open the document above for the full version.

SEAC SUB S.p.A. Via D. Norero, 29, 16040 S.Colombano Certenoli (GE) - Italy Tel: +39 0185 356301 Extension: 248 Email: [email protected] Date: 2026-07-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, Our product Screen Connect, model: Screen Connect, FCC ID: 2BGTUSCREENCONN, for marketing purpose, this product only supports BLE1M&2M.The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely Yours, Signature: Renato Macchiarelli Mechanical engineer

SEAC SUB S.p.A. Via D. Norero, 29, 16040 S.Colombano Certenoli (GE) - Italy Tel: +39 0185 356301 Extension: 248 Email: [email protected] CFR 47 §2.911(d)(5)(i) Attestation Letter Attestation Letter Date: 2026-07-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: 2BGTUSCREENCONN SEAC SUB S.p.A. certifies that the equipment for which authorization is sought, is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely Yours, Signature: Renato Macchiarelli Mechanical engineer

SEAC SUB S.p.A. Via D. Norero, 29, 16040 S.Colombano Certenoli (GE) - Italy Tel: +39 0185 356301 Extension: 248 Email: [email protected] CFR 47 §2.911 (d)(5)(ii) Attestation Letter Attestation Letter Date: 2026-07-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2BGTUSCREENCONN SEAC SUB S.p.A. certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely Yours, Signature: Renato Macchiarelli Mechanical engineer

U.S. AGENT LETTER OF ATTESTATION Date: 2026-07-20 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2BGTUSCREENCONN SEAC SUB S.p.A. certifies that, as of the date of the filing of the application, Iconsigh is our designated U.S. agent for service of process for the above referenced FCC ID. SEAC SUB S.p.A. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Iconsigh accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Iconsigh Address: 2310 Homestead Road, Suite C1, Los Altos, CA, 94024, United States FRN: 0033398652 Tel.: +1 (408) 320-9867 Email: [email protected] Signed by (printed name): Benjamin Kaur Signature: Applicant: SEAC SUB S.p.A. Address: Via D. Norero, 29, 16040 S.Colombano Certenoli (GE) – Italy FRN: 0035514132 Tel: +39 0185 356301 Extension: 248 Email: [email protected] Signed by (printed name): Renato Macchiarelli Signature:

SEAC SUB S.p.A. Via D. Norero, 29, 16040 S.Colombano Certenoli (GE) - Italy Tel: +39 0185 356301 Extension: 248 Email: [email protected] QA-FR-170-B 7/29/2014 FCC Authorization Date: 2026-07-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We SEAC SUB S.p.A., the undersigned, hereby authorizes Bay Area Compliance Laboratories Corp. (Shenzhen) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. (Shenzhen) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Renato Macchiarelli Mechanical engineer

SEAC SUB S.p.A. Via D. Norero, 29, 16040 S.Colombano Certenoli (GE) - Italy Tel: +39 0185 356301 Extension: 248 Email: [email protected] FCC Confidential Authorization Date: 2026-07-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2BGTUSCREENCONN In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, SEAC SUB S.p.A. hereby requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: Renato Macchiarelli Mechanical engineer

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601U32206E-RF-EXP Page 1 of 5 EUT EXTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601U32206E-RF-EXP Page 2 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601U32206E-RF-EXP Page 3 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601U32206E-RF-EXP Page 4 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601U32206E-RF-EXP Page 5 of 5

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601U32206E-RF-INP Page 1 of 5 EUT INTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601U32206E-RF-INP Page 2 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601U32206E-RF-INP Page 3 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601U32206E-RF-INP Page 4 of 5 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601U32206E-RF-INP Page 5 of 5 ANT

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601U32206E-RF-00A TR-EM-RF003 Page 23 of 75 Version 4.1 RF EXPOSURE EVALUATION RF EXPOSURE Applicable Standard According to FCC §2.1093 and §1.1307(b) (1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB 447498 D01 General RF Exposure Guidance v06. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] • [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where 1. f(GHz) is the RF channel transmit frequency in GHz. 2. Power and distance are rounded to the nearest mW and mm before calculation. 3. The result is rounded to one decimal place for comparison. 4. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test Exclusion. Measurement Result For worst case: Mode Frequency (MHz) Max tune-up conducted power # (dBm) Max tune-up conducted power # (mW) Distance (mm) Calculated value Threshold (1-g SAR) SAR Test Exclusion BLE2402-24802.01.5850.53.0Yes Result: Compliant

ANTENNA TEST REPORT Manufacture: SEAC SUB S.p.A. Address: Via D. Norero, 29, 16040 S.Colombano Certenoli (GE) - Italy Product Name: Tablet Diving Computer Product Model: BGM220S Report Number: 2403Z30926E-RF Date Of Issue: 2024/12/10 Reviewed & Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-83085888 www.ccttt.com.cn China Certification ICT Co., Ltd (Dongguan) Report No.: 2403Z30926E-RF Page 2 of 12 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. Each test item follows the test standard(s) without deviation. China Certification ICT Co., Ltd (Dongguan) Report No.: 2403Z30926E-RF Page 3 of 12 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 4 1. GENERAL INFORMATION .................................................................................................... 5 2. TEST CONFIGURATIONS ...................................................................................................... 6 2.1 T EST E NVIRONMENT ........................................................................................................................... 6 2.2 T EST E QUIPMENT ................................................................................................................................ 6 3. TEST RESULTS ......................................................................................................................... 7 3.1 G AIN AND E FFICIENCY ........................................................................................................................ 7 3.2 R ADIATION P ATTERN .......................................................................................................................... 8 4. EUT PHOTOGRAPHS ............................................................................................................ 11 5. TEST SETUP PHOTOGRAPHS ............................................................................................ 12 China Certification ICT Co., Ltd (Dongguan) Report No.: 2403Z30926E-RF Page 4 of 12 DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revision 1.0 2403Z30926E-RF Original Report 2024/12/10 China Certification ICT Co., Ltd (Dongguan) Report No.: 2403Z30926E-RF Page 5 of 12 1. GENERAL INFORMATION Product Name: Tablet Diving Computer Product Model: BGM220S Antenna Type: Integral Antenna Test Items: Gain; Efficiency; Radiation Pattern Test Frequency (MHz): 2402, 2440, 2480 Sample Number: 2UXC-1 EUT Received Date: 2024/11/23 EUT Received Status: Good China Certification ICT Co., Ltd (Dongguan) Report No.: 2403Z30926E-RF Page 6 of 12 2. TEST CONFIGURATIONS 2.1 Test Environment Temperature (°C) 23.5 Humidity (%RH) 50.2 Atmospheric Pressure (kPa) 101.8 Tester Luke Yuan Test Date 2024/12/10 2.2 Test Equipment Test Instrument R&S ZNB8 China Certification ICT Co., Ltd (Dongguan) Report No.: 2403Z30926E-RF Page 7 of 12 3. TEST RESULTS 3.1 Gain and Efficiency Frequency (MHz) Efficiency (%) Peak Gain (dBi) 2402.00 17.73 -3.42 2440.00 22.35 -2.72 2480.00 23.47 -2.57 China Certification ICT Co., Ltd (Dongguan) Report No.: 2403Z30926E-RF Page 8 of 12 3.2 Radiation Pattern 2402 MHz 3D Theta = 90, Phi = 0 Theta = 90, Phi = 90 Theta = 0, Phi = 0 Theta = 90, Phi = 180 Theta = 90, Phi = 270 Theta = 180, Phi = 0 China Certification ICT Co., Ltd (Dongguan) Report No.: 2403Z30926E-RF Page 9 of 12 2440 MHz 3D Theta = 90, Phi = 0 Theta = 90, Phi = 90 Theta = 0, Phi = 0 Theta = 90, Phi = 180 Theta = 90, Phi = 270 Theta = 180, Phi = 0 China Certification ICT Co., Ltd (Dongguan) Report No.: 2403Z30926E-RF Page 10 of 12 2480 MHz 3D Theta = 90, Phi = 0 Theta = 90, Phi = 90 Theta = 0, Phi = 0 Theta = 90, Phi = 180 Theta = 90, Phi = 270 Theta = 180, Phi = 0 China Certification ICT Co., Ltd (Dongguan) Report No.: 2403Z30926E-RF Page 11 of 12 4. EUT PHOTOGRAPHS Antenna China Certification ICT Co., Ltd (Dongguan) Report No.: 2403Z30926E-RF Page 12 of 12 5. TEST SETUP PHOTOGRAPHS ===== END OF REPORT =====

Note: The information marked # is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP or any agency of the U.S. Government. This report may contain data that are not covered by the NVLAP accreditation and are marked with an asterisk “▼”. Bay Area Compliance Laboratories Corp. (Shenzhen) 5F(B-West) , 6F, 7F, the 3rd Phase of Wan Li Industrial Building D, Shihua Rd, FuTian Free Trade Zone, Shenzhen, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn TR-EM-RF003 Page 1 of 75 Version 4.1 TEST REPORT Applicant Name:SEAC SUB S.p.A. Address:Via D. Norero, 29, 16040 S.Colombano Certenoli (GE) - Italy Report Number:2601U32206E-RF-00A FCC ID:2BGTUSCREENCONN Test Standard (s) FCC PART 15.247 Sample Description Product Type:Screen Connect Model No.:Screen Connect Multiple Model(s) No.:N/A Trade Mark: SEAC Date Received:2026-06-22 Issue Date:2026-08-26 Test Result:Pass ▲ ▲ In the configuration tested, the EUT complied with the standards above. Prepared and Checked By:Approved By: Cheeb HuangJimmy Xiao RF EngineerEMC Manager Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601U32206E-RF-00A TR-EM-RF003 Page 2 of 75 Version 4.1 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ..........................................................................................................................3 GENERAL INFORMATION ........................................................................................................................................4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)......................................................................................4 OBJECTIVE ....................................................................................................................................................................4 TEST METHODOLOGY....................................................................................................................................................4 MEASUREMENT UNCERTAINTY .....................................................................................................................................5 TEST FACILITY ..............................................................................................................................................................5 SYSTEM TEST CONFIGURATION ...........................................................................................................................6 SUMMARY OF TEST RESULTS ................................................................................................................................8 TEST EQUIPMENT LIST ............................................................................................................................................9 REQUIREMENTS AND TEST PROCEDURES ......................................................................................................11 AC LINE CONDUCTED EMISSIONS...............................................................................................................................11 UNWANTED EMISSION FREQUENCIES AND RESTRICTED BANDS .................................................................................13 6 DB EMISSION BANDWIDTH & 99% OCCUPIED BANDWIDTH....................................................................................16 PEAK OUTPUT POWER MEASUREMENT .......................................................................................................................18 POWER SPECTRAL DENSITY ........................................................................................................................................19 100 KHZ BANDWIDTH OF FREQUENCY BAND EDGE....................................................................................................20 CONDUCTED SPURIOUS EMISSION...............................................................................................................................21 DUTY CYCLE ...............................................................................................................................................................22 RF EXPOSURE EVALUATION ................................................................................................................................23 ANTENNA REQUIREMENT .....................................................................................................................................24 TEST DATA AND RESULTS .....................................................................................................................................25 UNWANTED EMISSION FREQUENCIES AND RESTRICTED BANDS .................................................................................25 6DB EMISSION BANDWIDTH........................................................................................................................................62 99% OCCUPIED BANDWIDTH ......................................................................................................................................64 MAXIMUM CONDUCTED OUTPUT POWER ...................................................................................................................66 POWER SPECTRAL DENSITY ........................................................................................................................................68 100 KHZ BANDWI…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601U32206E-RF-TSP Page 1 of 2 TEST SETUP PHOTOGRAPHS Radiated Emissions View (Below 30MHz) Radiated Emissions View (Below 1 GHz) Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601U32206E-RF-TSP Page 2 of 2 Radiated Emissions View (1-18 GHz) Radiated Emissions View (18-25 GHz)