2BGVBTKOWRCDigital radio system

Instruction Manual for TKO Wireless Remote Controller Overview The TKO wireless Remote controller is a simple trigger type remote control; It has a small and lightweight form factor, and maintains a comfortable grip; The TKO Remote controller retains only 2 keys, so it is easy to operate; It supports a single color LCD with 64 * 128 pixels. The most important is that it has excellent waterproof effect; It is one of the best choices for surfboard enthusiasts. Specifications  Operating system: uComicrium_OS  Number of channels: 2 channels  Operating voltage range: 5.0V  Operating current: <1A  Operating Temperature: -20°C ~ 60°C (-4°F ~ 140°F)  LCD resolution: 128*64 pixel  Magnetic UART Port Features  Ergonomic and compact design  Upgraded RF module with FRK protocol  Waterproof hall trigger  Colored LED light strip  Built-in lithium 1600mAh battery, Frequency Band: 2.4G: 2404.27-2473.27 MHz Modulation Type(s): FSK Antenna type(s):2.85dBi Antenna Designation: Ceramic antenna FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This Digital radio system meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. Thestandards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Digital radio system (FCC ID: 2BGVBTKOWRC) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for when properly worn on the body is 0.064W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

Attestation Statements (2024.06.14) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID#2BGVBTKOWRC) (The Kinetic Option Pte. Ltd. ), the undersigned, hereby authorize (FrSky RC) to act as our designated U.S. agent for service of process, (The Kinetic Option Pte. Ltd.) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. (FrSky RC) accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information： Company name: The Kinetic Option Pte. Ltd. Contact Name: Alvin Yeoh Address: 110 Lorong 23 Geylang #02-01 Singapore, 388410 FRN: 0035528181 Telephone No: +65 97118198 Email: [email protected] Signature [Alvin Yeoh] U.S. Agent Information: Company Name: FrSky RC Address: 471 W Lambert Rd. #113 Brea, CA 92821, USA FRN: 0034191643 Contact Name: Yifan Shao Telephone No: 714-987-3100 Email: [email protected] Signature [Yifan Shao]

The Kinetic Option Pte. Ltd. (2024.07.03) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Digital radio system / TKO Wireless Remote Controller /2BGVBTKOWRC) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Schematics Block diagram Operation description required to be submitted with this application be permanently withheld from public review. These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Please contact me if there is any information you may need. Sincerely, Alvin Yeoh

The Kinetic Option Pte. Ltd. (2024.07.03) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (SHENZHEN STS TEST SERVICES CO., LTD.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Alvin Yeoh

Page 1 of 4 Report No.: STS2405027 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: TKO Wireless Remote Controller Photo 1 Photo 2 Page 2 of 4 Report No.: STS2405027 Photo 3 Photo 4 Page 3 of 4 Report No.: STS2405027 Photo 5 Photo 6 Page 4 of 4 Report No.: STS2405027 Photo 7

FCC Label Digital radio system Model name: TKO Wireless Remote Controller FCC ID: 2BGVBTKOWRC 40mm*30mm

Page 1 of 4 Report No.: STS2405027 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: TKO Wireless Remote Controller Photo 1 Photo 2 2.4G Antenna Page 2 of 4 Report No.: STS2405027 Photo 3 Photo 4 Page 3 of 4 Report No.: STS2405027 Photo 5 Photo 6 Page 4 of 4 Report No.: STS2405027 Photo 7 Photo 8

Page1of37 SARTestReport ReportNo.:AGC02787240505FH01 FCCID: 2BGVBTKOWRC APPLICATIONPURPOSE: OriginalEquipment PRODUCTDESIGNATION: Digitalradiosystem BRANDNAME: N/A MODELNAME: TKOWirelessRemoteController APPLICANT: TheKineticOptionPte.Ltd. DATEOFISSUE: 18Jun.2024 STANDARD(S): IEEEStd.1528:2013 FCC47CFRPart2§2.1093 IEEEStdC95.1™-2005 REPORTVERSION: V1.0 AttestationofGlobalCompliance(Shenzhen)Co.,Ltd. ReportNo.:AGC02787240505FH01 Page 2 of 37 ReportReviseRecord ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/18Jun.2024ValidInitialRelease ReportNo.:AGC02787240505FH01 Page 3 of 37 TestReport ApplicantNameTheKineticOptionPte.Ltd. ApplicantAddress110Lorong23Geylang#02-01Singapore,388410 ManufacturerNameFrSkyElectronicCo.,Ltd. ManufacturerAddress F-4,BuildingC,ZhongxiuTechnologyPark,No.3YuanxiRoad,Wuxi,214125, Jiangsu,China FactoryNameFrSkyElectronicCo.,Ltd. FactoryAddress F-4,BuildingC,ZhongxiuTechnologyPark,No.3YuanxiRoad,Wuxi,214125, Jiangsu,China ProductDesignationDigitalradiosystem BrandNameN/A ModelNameTKOWirelessRemoteController DifferentDescriptionN/A EUTVoltage RatedVoltage:3.7V ChargeLimitVoltage:4.2V Capacity:1410mAh ApplicableStandard IEEEStd.1528:2013 FCC47CFRPart2§2.1093 IEEEStdC95.1™-2005 Dateofreceiptoftestitem30May.2024 TestDate30May.2024 ReportTemplateAGCRT-US-2.4G/SAR(2021-04-20) Note:Theresultsoftestinginthisreportapplytotheproduct/systemwhichwastestedonly. PreparedBy TheaHuang (ProjectEngineer) 18Jun.2024 ReviewedBy CalvinLiu (Reviewer) 18Jun.2024 ApprovedBy MaxZhang (AuthorizedOfficer) 18Jun.2024 ReportNo.:AGC02787240505FH01 Page 4 of 37 TABLEOFCONTENTS 1.SUMMARYOFMAXIMUMSARVALUE ..........................................................................................................................5 2.GENERALINFORMATION ..............................................................................................................................................6 2.1.EUTDESCRIPTION..................................................................................................................................................................6 3.SARMEASUREMENTSYSTEM .........................................................................................................................................7 3.1.THESATIMOSYSTEMUSEDFORPERFORMINGCOMPLIANCETESTSCONSISTSOFFOLLOWINGITEMS......................................7 3.2.COMOSARE-FIELDPROBE ...................................................................................................................................................8 3.3.ROBOT....................................................................................................................................................................................8 3.4.VIDEOPOSITIONINGSYSTEM..................................................................................................................................................9 3.5.DEVICEHOLDER .....................................................................................................................................................................9 3.6.SAMTWINPHANTOM..........................................................................................................................................................10 4.SARMEASUREMENTPROCEDURE..............................................................................................................................11 4.1.SPECIFICABSORPTIONRATE(SAR)......................................................................................................................................11 4.2.SARMEASUREMENTPROCEDURE ........................................................................................................................................12 4.3.RFEXPOSURECONDITIONS..................................................................................................................................................14 5.TISSUESIMULATINGLIQUID........................................................................................................................................16 5.1.THECOMPOSITIONOFTHETISSUESIMULATINGLIQUID ..........................................................................................................16 5.2.TISSUEDIELECTRICPARAMETERSFORHEADANDBODYPHANTOMS....................................................................................17 5.3.TISSUECALIBRATIONRESULT...............................................................................................................................................18 6.SARSYSTEMCHECKPROCEDURE............................................................................................................................19 6.1.SARSYSTEMCHECKPROCEDURES ......................................................................................................................................19 6.2.SARSYSTEMCHECK............................................................................................................................................................20 7.EUTTESTPOSITION.......................................................................................................................................................22 7.1.BODYWORNPOSITION .........................................................................................................................................................22 8.SAREXPOSURELIMITS................................................................................................................................................23 9.TESTFACILITY...............................................................................................................................................................24 10.TESTEQUIPMENTLIST ...............................................................................................................................................25 11.MEASUREMENTUNCERTAINTY ........................................................…

Text truncated - open the document above for the full version.

CALIBRATIONDATA PROBECALIBRATIONDATA DIPOLECALIBRATIONDATA

Description: 9520 2.4-2.5GHz Chip Antenna PART NUMBER: ANT9520LL06R2400A In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. For more information: Pulse Worldwide Headquarters Pulse/Larsen Antennas Europe Headquarters Pulse (Suzhou) Wireless Products Co, Inc. 15255 Innovation Drive #100 Pulse GmbH & Do, KG 99 Huo Ju Road(#29 Bldg,4 th Phase San Diego, CA 92128 Vancouver, WA 98683 Zeppelinstrasse 15 Suzhou New District USA USA Herrenberg, Germany Jiangsu Province, Suzhou 215009 PR China Tel:1-858-674-8100 Tel: 1-360-944-7551 - Tel: 49 7032 7806 0 Tel: 86 512 6807 9998 18110 SE 34 th St Bldg 2 Suite 250 Features: Applications: •Size : 9.50x2.00x1.10 mm •Omni-directional Radiation •Tape & reel automatic mounting •Reflow process compatible •RoHS compliant •2.4 GHz WiFi device •Bluetooth gadget •Zigbee device •ISM band equipment 1 ELECTRICAL SPECIFICATIONS Working Frequency 2.45 GHz Bandwidth 340 MHz(Typ.) Return Loss 7.36 dB Max. Polarization Linear Azimuth Beamwidth Omni-directional Peak Gain 2.85 dBi (Typ.) Impedance 50 Ω Operating Temperature - 40~105 °C Maximum Power 1 W Termination Ni / Sn (Environmentally-Friendly Leadless) Resistance to Soldering Heats 260 °C , 10sec. NOTE 1. The specification is defined on Pulse evaluation board In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 9520 2.4-2.5GHz Chip Antenna PART NUMBER: ANT9520LL06R2400A 2 MECHANICAL DRAWING Dimension L (mm) 9.50 ± 0.20 W (mm) 2.00 ± 0.20 T (mm) 1.10 ± 0.20 REFERENCE DESIGN OF EVALUATION BOARD Outlook and dimension of evaluation board In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 9520 2.4-2.5GHz Chip Antenna PART NUMBER: ANT9520LL06R2400A 3 REFERENCE DESIGN OF EVALUATION BOARD Details of soldering Pad In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 9520 2.4-2.5GHz Chip Antenna PART NUMBER: ANT9520LL06R2400A 4 REFERENCE DESIGN OF EVALUATION BOARD Radiation pattern In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 9520 2.4-2.5GHz Chip Antenna PART NUMBER: ANT9520LL06R2400A 5 ELECTRICAL PERFORMANCES Return loss Marker data 1. 2.27GHz, -10.131dB 2. 2.45GHz, -20.745dB 3. 2.69GHz, -10.268dB In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: 9520 2.4-2.5GHz Chip Antenna PART NUMBER: ANT9520LL06R2400A 6 REVISION HISTORY Revision Date Description Version 1 Nov. 20, 2020 - New issue

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2405027W02 Issued for The Kinetic Option Pte. Ltd. 110 Lorong 23 Geylang #02-01 Singapore, 388410 Product Name: Digital radio system Brand Name: N/A Model Name: TKO Wireless Remote Controller Series Model(s): N/A FCC ID: 2BGVBTKOWRC Test Standards: FCC Part15.247 Page 2 of 55 Report No.: STS2405027W02 TEST REPORT Applicant’s Name ................. : The Kinetic Option Pte. Ltd. Address .................................. : 110 Lorong 23 Geylang #02-01 Singapore, 388410 Manufacturer's Name ........... : FrSky Electronic Co., Ltd. Address .................................. : F-4, Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Product Description Product Name ........................ : Digital radio system Brand Name ........................... : N/A Model Name ........................... : TKO Wireless Remote Controller Series Model(s) .................... : N/A Test Standards...................... : FCC Part15.247 Test Procedure ....................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ............................... : Date of receipt of test item ......... : 11 May 2024 Date (s) of performance of tests : 11 May 2024~ 24 May 2024 Date of Issue ............................. : 24 May 2024 Test Result ................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Chris Chen) Authorized Signatory : (Bovey Yang) Page 3 of 55 Report No.: STS2405027W02 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 FREQUENCY HOPPING SYSTEM REQUIREMENTS 10 2.4 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 11 2.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 2.6 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 12 2.7 EQUIPMENTS LIST 13 3. EMC EMISSION TEST 14 3.1 CONDUCTED EMISSION MEASUREMENT 14 3.2 RADIATED EMISSION MEASUREMENT 18 4. CONDUCTED SPURIOUS & BAND EDGE EMISSION 30 4.1 LIMIT 30 4.2 TEST PROCEDURE 30 4.3 TEST SETUP 31 4.4 EUT OPERATION CONDITIONS 31 4.5 TEST RESULTS 31 5. NUMBER OF HOPPING CHANNEL 32 5.1 LIMIT 32 5.2 TEST PROCEDURE 32 5.3 TEST SETUP 32 5.4 EUT OPERATION CONDITIONS 32 5.5 TEST RESULTS 32 6. AVERAGE TIME OF OCCUPANCY 33 6.1 LIMIT 33 6.2 TEST PROCEDURE 33 6.3 TEST SETUP 33 6.4 EUT OPERATION CONDITIONS 33 6.5 TEST RESULTS 33 7. HOPPING CHANNEL SEPARATION MEASUREMEN 34 Page 4 of 55 Report No.: STS2405027W02 Table of Contents Page 7.1 LIMIT 34 7.2 TEST PROCEDURE 34 7.3 TEST SETUP 34 7.4 EUT OPERATION CONDITIONS 34 7.5 TEST RESULTS 34 8. BANDWIDTH TEST 35 8.1 LIMIT 35 8.2 TEST PROCEDURE 35 8.3 TEST SETUP 35 8.4 EUT OPERATION CONDITIONS 35 8.5 TEST RESULTS 35 9. OUTPUT POWER TEST 36 9.1 LIMIT 36 9.2 TEST PROCEDURE 36 9.3 TEST SETUP 37 9.4 EUT OPERATION CONDITIONS 37 9.5 TEST RESULTS 37 10. ANTENNA REQUIREMENT 37 10.1 STANDARD REQUIREMENT 37 10.2 EUT ANTENNA 37 APPENDIX 1-TEST DATA 38 1. MAXIMUM PEAK CONDUCTED OUTPUT POWER 38 2. -20DB BANDWIDTH 41 3. CARRIER FREQUENCIES SEPARATION 44 4. NUMBER OF HOPPING CHANNEL 46 5. BAND EDGE 47 6. BAND EDGE(HOPPING) 49 7. CONDUCTED RF SPURIOUS EMISSION 51 8. DWELL TIME 54 APPENDIX 2-PHOTOS OF TEST SETUP 55 Page 5 of 55 Report No.: STS2405027W02 Revision History Rev. Issue Date Report No. Effect Page Contents 00 24 May 2024 STS2405027W02 ALL Initial Issue Page 6 of 55 Report No.: STS2405027W02 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247(a)(1) Hopping Channel Separation PASS -- 15.247(a)(1)&(b)(1) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247(d) Conducted Spurious & Band Edge Emission PASS -- 15.247(a)(1)(iii) Number of Hopping Frequency PASS -- 15.247(a)(1)(iii) Dwell Time PASS -- 15.247(a)(1) Bandwidth PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d)/part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 55 Report No.: STS2405027W02 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.755dB 2 Unwanted Emissions, conducted ±2.874dB 3 All emissions, radiated 9K-30MHz ±3.80dB 4 All emissions, radiated 30M-1GHz ±4.18dB 5 All emissions, radiated 1G-6GHz ±4.90dB 6 All emissions, radiated>6G ±5.24dB 7 Conducted Emission (9KHz-150KHz) ±2.19dB 8 Conducted Emission (150KHz-30MHz) ±2.53dB 9 Occupied Channel Bandwidth ±3.5% 10 Duty Cycle ±3.2% Page 8 of 55 Report No.: STS2405027W02 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name Digital radio system…

Text truncated - open the document above for the full version.

ReportNo.:AGC02787240505FH01 Page 1 of 6 EUTPhotographs TOPVIEWOFEUT BOTTOMVIEWOFEUT ReportNo.:AGC02787240505FH01 Page 2 of 6 FRONTVIEWOFEUT BACKVIEWOFEUT ReportNo.:AGC02787240505FH01 Page 3 of 6 LEFTVIEWOFEUT RIGHTVIEWOFEUT ReportNo.:AGC02787240505FH01 Page 4 of 6 APPENDIXC.TESTSETUPPHOTOGRAPHS BodyFront0mm Edge1(Top)0mm ReportNo.:AGC02787240505FH01 Page 5 of 6 Edge2(Right)0mm Edge4(Left)0mm ReportNo.:AGC02787240505FH01 Page 6 of 6 ----ENDOFREPORT----

Page 1 of 2 Report No.: 2BGVBTKOWRC DSS Setup photo Model Number: TKO Wireless Remote Controller DSS conduction DSS radiation L Page 2 of 2 Report No.: 2BGVBTKOWRC DSS radiation H