2BGX2JQ00001a remote control device for walk device(household and indoor used)

Remote control interface 1. START:Press the button in standby or pause mode，Start running the treadmill。 SPEED UP MENU SPEED DOWN START/ STOP/PAUSE SPEED-2 SPEED-4 STOP:Long Press the button while the treadmill is running or pause mode，Stop the treadmill。 PAUSE:Short Press the button while the treadmill is running， Stop the treadmill。 2. MENU： A.Rest is displayed in standby mode,Press the key to switch cycle:redy mode→time counter mode→range reversal mode→Calorimeter mode→Standby mode. B.In working condition ,Press the key to switch cycle:0.00→ （time）T:00:00→（distance）D:0.00→（calorie）C:0000→（speed） S:0.00 3. SPEED UP and SPEED DOWN : A. Rest is displayed in standby mode,Press the key to adjust the parameter settings,Long press to adjust quickly B. In working condition,short press key to adjust the speed change ,Long press to adjust quickly 4. SPEED-2:In working condition,press key to adjust the speed to 2.0。 5. SPEED-4:In working condition,press key to adjust the speed to 4.0。 6. User Manual Please add the required statement below into the user manual as required per 15.21 CAUTION: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.

Attestation Statement Letter I Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: __________________ Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC Application for FCC ID: _______________________________ ________________________ certifies that the equipment for which authorization is sought is not “covered” equipment prohibited for receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Applicant’s Signature: Applicant’s Name:

Attestation Statement Letter II Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: __________________ Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC Application for FCC ID: _______________________________ _________________________ certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Applicant’s Signature: Applicant’s Name:

FCC Agent Authorization Letter Date: __________________ SUBJECT: FCC Application for FCC ID: _______________________________ To Whom It May Concern: We, the undersigned, hereby authorize _________________________________________ in _____________________________________________ on our behalf, to apply to the Federal Communications Commission for our equipment. Any and all acts carried out by _____________________________________________ on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Sincerely, Client’s signature: ________________________________ Client’s name & title: _____________________________ Contact information / address: 21046

Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: ________________ Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Type of Confidentiality Requested Exhibit Type ☐Short Term ☐Permanent Block Diagrams ☐Short Term External Photos ☐Short Term ☐Permanent* Internal Photos ☐Short Term ☐Permanent Operation Description ☐Short Term ☐Permanent Parts List/BOM ☐Short Term ☐Permanent Schematics ☐Short Term Test Setup Photos ☐Short Term ☐Permanent* User manual *Requires further justification before permanent confidentiality will be allowed. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for an initial period of ____________ days. Sincerely, Client’s signature: ________________________________ Client’s name & title: _____________________________ Contact information / address:

JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2403070 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 1 of 3 EUT External Photos JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2403070 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 2 of 3 JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2403070 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 3 of 3 ------End------

1. Location 位置： Take photo to show the label on the original product or show the label location on paper designed format. 在贴了标签的实物上照相或者在设计图上画出标签的位置。 2. Size尺寸： Mark the size of the label. length, width etc.标出标签尺寸，长，宽等。 Size：30mm*30mm 3. Content 内容：

JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2403070 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 1 of 4 EUT Internal Photos JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2403070 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 2 of 4 JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2403070 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 3 of 4 JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2403070 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 4 of 4 ------End------

JianYan Testing Group Shenzhen Co., Ltd. Report No.: JYTSZ-R12-2400310 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in above the application standard version. Test results reported herein relate only to the item(s) tested. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Cover Page RF Exposure Evaluation Report Report No.: JYTSZ-R12-2400310 Applicant: Zhejiang Jingqi Technology Co., Ltd Address of Applicant: Building 10, Longxin Industrial Park, Tangya Town, Jindong District, Jinhua City, Zhejiang Province, China Equipment Under Test (EUT) Product Name: Remote control Model No.: JQ00001 Trade mark: N/A FCC ID: 2BGX2-JQ00001 Applicable standards: KDB 447498 D04 Interim General RF Exposure Guidance v01 Date of sample receipt: 19 Mar., 2024 Date of Test: 20 Mar., to 24 May, 2024 Date of report issue: 27 May, 2024 Test Result: PASS Project by: Date: 27 May, 2024 Project Engineer Reviewed by: Date: 27 May, 2024 Senior Engineer Approved by: Date: 27 May, 2024 Manager Report No.: JYTSZ-R12-2400310 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-187-C Project No.: JYTSZR2403070 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 2 of 6 Version 1 Version No. Date Description 00 27 May, 2024 Original Report No.: JYTSZ-R12-2400310 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-187-C Project No.: JYTSZR2403070 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 3 of 6 Contents 2 Page Cover Page ............................................................................................................................................................. 1 1 Version ........................................................................................................................................................... 2 2 Contents ......................................................................................................................................................... 3 3 General Information ...................................................................................................................................... 4 3.1 Client Information ................................................................................................................................... 4 3.2 General Description of E.U.T. ................................................................................................................ 4 3.3 Operating Modes .................................................................................................................................... 5 3.4 Additions to, Deviations, or Exclusions from the Method ....................................................................... 5 3.5 Laboratory Facility .................................................................................................................................. 5 3.6 Laboratory Location ................................................................................................................................ 5 4 Technical Requirements Specification ....................................................................................................... 6 4.1 Limits ...................................................................................................................................................... 6 4.2 Result ..................................................................................................................................................... 6 4.3 Conclusion .............................................................................................................................................. 6 Report No.: JYTSZ-R12-2400310 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-187-C Project No.: JYTSZR2403070 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 4 of 6 General Information 3 Client Information 3.1 Applicant: Zhejiang Jingqi Technology Co., Ltd Address: Building 10, Longxin Industrial Park, Tangya Town, Jindong District, Jinhua City, Zhejiang Province, China Manufacturer: Zhejiang Jingqi Technology Co., Ltd Address: Building 10, Longxin Industrial Park, Tangya Town, Jindong District, Jinhua City, Zhejiang Province, China Factory: Zhejiang Jingqi Technology Co., Ltd Address: Building 10, Longxin Industrial Park, Tangya Town, Jindong District, Jinhua City, Zhejiang Province, China General Description of E.U.T. 3.2 Product Name: Remote control Model No.: JQ00001 Operation Frequency: 433.92 MHz Modulation technology: ASK Antenna Type: PCB Antenna Antenna gain: -5.17 dBi (declare by Applicant) Power Supply: DC 3V(AAA barttery*2) Test Sample Condition: The test samples were provided in good working order with no visible defects. Report No.: JYTSZ-R12-2400310 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-187-C Project No.: JYTSZR2403070 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an Distr…

Text truncated - open the document above for the full version.

ReportNo.:RFI-LAB-RF-202403-CC08 QP030-E41 Page1of10 TestingReport CustomerName:ZhejiangJingqiTechnologyCo.,Ltd ProductName:Remotecontrol SampleModel:JQ00001 ReferenceStandard:GB/T9410-2008;ANSI/IEEEStd149-1979 IssueDate:2024.3.26 Engineer:Date: Auditor:Date: Approver:Date: ReportNo.:RFI-LAB-RF-202403-CC08 QP030-E41 Page2of10 Version VersionNo.DateDescriptionFormulateApproval A02024.3.26Forthefirsttime,formulateZkrisEason Contents 1.GeneralInformation.........................................................................................................................3 1.1Generalinformationoftestinginstitutions...........................................................................3 1.2Testingprinciple...................................................................................................................3 1.3Testequipment......................................................................................................................4 1.4Testenvironment...................................................................................................................4 1.5Statement..............................................................................................................................4 2.SampleInformation.........................................................................................................................5 2.1Clientinformation.................................................................................................................5 2.2DescriptionofEUT(S)..........................................................................................................5 2.3EUTappearance....................................................................................................................6 2.4EUTsetupphotooffreespaceOTAtesting.........................................................................6 3.TestResults......................................................................................................................................7 3.1Teststandard.........................................................................................................................7 3.2Testuncertainty.....................................................................................................................7 3.3Testdata................................................................................................................................8 3.3.1VSWRparameters.....................................................................................................8 3.3.2VSWRdata................................................................................................................8 3.3.3Typicalfreespaceefficiencyandgain......................................................................8 3.3.4Typicalfreespaceradiationpattern...........................................................................9 （Thefollowingisblank）..............................................................................................................10 ReportNo.:RFI-LAB-RF-202403-CC08 QP030-E41 Page3of10 1.GeneralInformation 1.1Generalinformationoftestinginstitutions Name ShenzhenRFI-LABCommunicationTechnologyCo.,Ltd. Address 103Building1TingweilndustrialPark,No.6,LiufangRoad,Zone 67Xingdong,Xin'anSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Tel 13682621346 E-mail [email protected] Equipment Alltheequipmentusedinthereportisfixedin103Building1Tingweilndustrial Park,No.6,LiufangRoad,Zone67Xingdong,Xin'anSubdistrict,Bao'anDistrict, Shenzhen,Guangdong,China 1.2Testingprinciple ReportNo.:RFI-LAB-RF-202403-CC08 QP030-E41 Page4of10 1.3Testequipment EquipmentModelNo.SerialNo.Manufacturer Calibration date Next calibration date OTATest System RayZone-5000 RFI-LAB-RF -D00 GTS2023.3.142025.3.13 Network Analyzer E5071C RFI-LAB-RF -D01 KEYSIGHT2023.5.112024.5.10 Network Analyzer E5071C RFI-LAB-RF -C02 KEYSIGHT2023.5.112024.5.10 1.4Testenvironment Temperature 23.9°C Humidity 58%RH Pressure 100.23kPa 1.5Statement (1)Thetestresultsinthereportareonlyapplicabletothetestedsamplesandthetestedsamples workundertheenvironmentdescribedinthereport. (2)OnlyShenzhenRFI-LABCommunicationTechnologyCo.,Ltd.havetherighttomodifythe report,andthemodificationinformationshallbeannotatedintherevisionform. (3)Anyobjectiontothisreportshallberaisedwithin30daysafterformalconfirmationofthe report. (4)Thisreportisinvalidifthereisanyevidencethatthesampleinformationprovidedisfalsified. (5)Thereportisinvalidwithoutthesignatureoftheauditorandapprover. ReportNo.:RFI-LAB-RF-202403-CC08 QP030-E41 Page5of10 2.SampleInformation 2.1Clientinformation Name ZhejiangJingqiTechnologyCo.,Ltd Address Building10,LongxinIndustrialPark,TangyaTown,JindongDistrict, JinhuaCity,ZhejiangProvince,China Contacts / Tel / E-mail / Manufacturer ZhejiangJingqiTechnologyCo.,Ltd 2.2DescriptionofEUT(S) ProductName Remotecontrol SampleModel JQ00001 AntennaSize / AntennaType PCBAntenna TestItem Antennagain;Efficiency;Radiationpattern FrequencyRange 428MHz-438MHz ReceivedDate 2024.3.26 TestDate 2024.3.26 Remark / ReportNo.:RFI-LAB-RF-202403-CC08 QP030-E41 Page6of10 2.3EUTappearance 2.4EUTsetupphotooffreespaceOTAtesting Planform Frontview ReportNo.:RFI-LAB-RF-202403-CC08 QP030-E41 Page7of10 3.TestResults 3.1Teststandard NameParameterMethodStandardno. Mobile communication antenna Antennagain Genericspecification forantennasusedinthe mobilecommunications GB/T 9410-2008 Radiationpattern Antenna Radiationefficiency IEEEStandardTest ProceduresforAntennas ANSI/IEEEStd 149-1979 Gainanddirectivity 3.2Testuncertainty TheuncertaintywascalculatedonthebasisoftheGUMpublishedbyISO,usingthe inclusionfactorofK=2andthe95%confidenceleveltoexpresstheextended uncertainty. ItemUncertainty Antennagain±0.72dB Radiationefficiency±0.72dB ReportNo.:RFI-LAB-RF-202403-CC08 QP030-E41 Page8of10 3.3Testdata 3.3.1VSWRparameters 3.3.2VSWRdata 3.3.3Typicalfreespaceefficiencyandgain Frequency/MHz 428433438 VSWR 7.85648.57989.0574 F…

Text truncated - open the document above for the full version.

JianYan Testing Group Shenzhen Co., Ltd. Report No.: JYTSZ-R12-2400309 This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in above the application standard version. Test results reported herein relate only to the item(s) tested. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. Cover Page FCC RF Test Report Report No.: JYTSZ-R12-2400309 Applicant: Zhejiang Jingqi Technology Co., Ltd Address of Applicant: Building 10, Longxin Industrial Park, Tangya Town, Jindong District, Jinhua City, Zhejiang Province, China Equipment Under Test (EUT) Product Name: Remote control Model No.: JQ00001 Trade Mark: N/A FCC ID: 2BGX2-JQ00001 Applicable Standards: FCC CFR Title 47 Part 15C (§15.231) Date of Sample Receipt: 19 Mar., 2024 Date of Test: 20 Mar., to 24 May, 2024 Date of Report Issue: 27 May, 2024 Test Result: PASS Tested by: Date: 27 May, 2024 Project Engineer Reviewed by: Date: 27 May, 2024 Senior Engineer Approved by: Date: 27 May, 2024 Manager Report No.: JYTSZ-R12-2400309 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-155-C Project No.: JYTSZR2403070 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 2 of 20 Version 1 Version No. Date Description 00 27 May, 2024 Original Report No.: JYTSZ-R12-2400309 JianYan Testing Group Shenzhen Co., Ltd. Report Template No.: JYTSZ4b-155-C Project No.: JYTSZR2403070 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 3 of 20 Contents 2 Page Cover Page ............................................................................................................................................................. 1 Version ........................................................................................................................................................... 2 1 Contents ......................................................................................................................................................... 3 2 General Information ...................................................................................................................................... 4 3 Client Information ................................................................................................................................... 4 3.1 General Description of E.U.T. ................................................................................................................ 4 3.2 Test Mode and Environment .................................................................................................................. 5 3.3 Description of Test Auxiliary Equipment ................................................................................................ 5 3.4 Measurement Uncertainty ...................................................................................................................... 5 3.5 Additions to, Deviations, or Exclusions From the Method ...................................................................... 5 3.6 Laboratory Facility .................................................................................................................................. 5 3.7 Laboratory Location ................................................................................................................................ 6 3.8 Test Instruments List .............................................................................................................................. 6 3.9 Measurement Setup and Procedure ........................................................................................................... 8 4 Test Setup .............................................................................................................................................. 8 4.1 Test Procedure ....................................................................................................................................... 9 4.2 Test Results ................................................................................................................................................. 10 5 Summary .............................................................................................................................................. 10 5.1 Clause and Data Summary .............................................................................................................. 10 5.1.1 Test Limit .......................................................................................................................................... 11 5.1.2 Antenna Requirement .......................................................................................................................... 12 5.2 20dB Bandwidth ................................................................................................................................... 13 5.3 Field Strength of Fundamental ............................................................................................................. 14 5.4 Field Strength of Spurious Emissions .................................................................................................. 16 5.5 Duration Time ...................…

Text truncated - open the document above for the full version.

JianYan Testing Group Shenzhen Co., Ltd. JianYan Testing Group Shenzhen Co., Ltd. Project No.: JYTSZR2403070 No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, People's Republic of China. Tel: +86-755-23118282, Fax: +86-755-23116366 Page 1 of 1 Setup Photos Radiated Spurious Emission Below 1GHz Above 1GHz ------End------