Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
POCKE TAL K CO RP ORA TIO N To: FederalCommunicationsCommissionDate:2024/07/25 7435OaklandMillsRoad Columbia,MD21046 USA Attestation Section2.911(d)(5)(i)andSection2.911(d)(5)(ii) (KDB986446D01CoveredEquipment) Section2.911(d)(5)(i) POCKETALK CORPORATIONcertifiesthattheequipmentforwhichauthorizationis soughtis not“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuantto section2.903of theFCCrules. Section2.911(d)(5)(ii) POCKETALK CORPORATIONcertifiesthat,asof thedateof thefilingof the application,theapplicantis notidentifiedontheCoveredList(asa specifically namedentityoranyof itssubsidiariesoraffiliates)asanentityproducing“covered” equipment. Type of Equipment subject to FCC Certification: POCKETALK S2 FCC ID: 2BGXA-PTS2 If you have any questions, please feel free to contact me ContactPerson:SEISHIMIKI Positionin theCompany:CDO Dateof Signature:2024-07-25 ___________________________ Signatory (signatureof theapplicant)
POCKETALK CORPORATION To: Federal Communications Commission Date: 2024/07/25 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Certification designating a U.S. Agent for Service of Process Section 2.911(d)(7) (KDB 986446 D01 Covered Equipment) POCKETALK CORPORATION(“the applicant”) as required by section 2.911(d)(7), designate below contact located in the United States for purposes of acting as the applicant’s agent for service of process. The applicant also acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Type of E quipment subject to FCC Certification: POCKETALK S2 FCC ID: 2BGXA-PTS2 Sincerely yours, Applicant/Grantee US Agent FRN: 0035547827 FRN: _________________ ___________________ (Signature) (Signature) POCKETALK CORPORATION POCKETALK INC. SEISHI MIKII Joe Miller CDO General Manager [email protected] [email protected] 4F Hamamatsucho PREX, 2-2-12 Shiba, 445 Sherman Ave. Suite 120 Minato-ku, Tokyo 105-0014, Japan Palo Alto California 94306, USA 0035802057
POCKETALK CORPORATION Date: 2024/07/25 To: FederalCommunicationsCommission, Authorization& EvaluationDivision, 7435 OaklandMills Road, Columbia,MD 21046 To WhomIt May Concern: The POCKETALK CORPORATION, the undersigned, hereby authorizes Mrs.wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the POCKETALK CORPORATION solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2BGXA -PTS2 including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the POCKETALK CORPORATION in connection with the Application shall have the same effect as acts of the POCKETALK CORPORATION. POCKETALK CORPORATION also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thankyou for your attentionto this matter. Yours Sincerely, Signatory: Contactname:SEISHIMIKI Title: Director Tel: +818020325214 Email:[email protected] Companyname:POCKETALK CORPORATION
POCKETALK CORPORATION Date: 2024/07/25 To: FederalCommunicationsCommission, Authorization& EvaluationDivision, 7435 OaklandMills Road, Columbia,MD 21046 Re: Request of Confidentiality for FCC ID: 2BGXA-PTS2 To Whomit may concern: Pursuantto sections0.457 and 0.459 of Commission’s Rules(CFR47), and Section552(b)(4)of the Freedomof InformationAct, POCKETALK CORPORATION hereby requestsconfidentialityand treatmentof certaininformationaccompanyingthis application. The materialscontaintrade secretsand proprietaryinformationnot customarilyreleasedto the public.The publicdisclosureof thesemattersmight be harmfulto the Applicantand provideunjustifiedbenefitsto its competitors. We are also herebyrequestShort-Term Confidentialityfor 180 days after the grant as outlinedin PublicNoticeDA04-1705.This provisionwill give POCKETALK CORPORATION temporaryconfidentialityof commerciallysensitiveinformationprior to productrelease. The requestedPermanentand Short-Term Confidentialexhibitsare listed as follows: PERMANENTAND SHORT-TERMCONFIDENTIALLIST ExhibitDescription PERMANENT 1Block Diagram 2OperationalDescription 3Schematics 4BOM SHORT-TERM 5ExternalPhotos 6InternalPhotos 7Test-SetupPhotos 8User Manual The Applicantunderstandsthat pursuantto Rule 0.457,disclosureof this applicationand all accompanyingdocumentations,whereapplicable,will not be made publicbeforethe date of the Grant for this application. Signatory: Contactname:SEISHIMIKI Title: CDO Tel: +818020325214 Email:[email protected] Companyname:POCKETALK CORPORATION
POCKETALKCORPORATION Ad -Ho cCo untr y Co de Co ver Le tter We, <POCKETALK CORPORATION>, declare that this EUT (FCC ID: 2BGXA-PTS2, IC ID： 29572-PTS2) doesn’t have Ad Hoc Mode function on “non-US/Canada frequencies”. In addition, the frequency selection feature is disable by firmware for device marketed to the US/Canada. For DTS part of this device, only channel 1~11 will be used in North America. Country code selection is disabled. Shouldyou ha ve an y que stionsor com ments regar dingthismatter, ple ase ha ve my be st attention. Sincerely your s, （sig na tur e） SEISHIMIK I Compan y name：POCKET ALK CORPORATION Tel: +8 180 2032 521 4 Fax: N/A Em ail: m ick ey@pocketalk .c om
POCKETALKCORPORATION UNIIDeclarationLetter WehavedeclaredbelowfeaturedforFCCequipmentauthorization,deviceFCCID:2BGXA-PTS2 (1)DFSDevice--☐Master,☐ClientwithRadardetectioncapability, ☒Clientwithoutradardetectioncapability,☐N/A (2)Active/PassiveScanning,adhocmodeaccesspointcapability FrequencyBand (MHz) ActiveScanning (thedevicecan transmitaprobe (beacon)) passivescanning (wherethedevice is canlistenonly withno probes) AdHocMode capability Accesspoint capability 2412–2462MHz☒Yes,☐No☒Yes,☐No☐Yes,☒No☐Yes,☒No 2422–2452MHz☒Yes,☐No☒Yes,☒No☐Yes,☒No☐Yes,☒No 5745–5825MHz☐Yes,☐No☐Yes,☐No☐Yes,☐No☐Yes,☐No 5755–5795MHz☐Yes,☐No☐Yes,☐No☐Yes,☐No☐Yes,☐No 5180–5240MHz☒Yes,☐No☒Yes,☐No☐Yes,☒No☐Yes,☒No 5190–5230MHz☒Yes,☐No☒Yes,☐No☐Yes,☒No☐Yes,☒No 5260–5320MHz☐Yes,☒No☒Yes,☐No☐Yes,☒No☐Yes,☒No 5270–5310MHz☐Yes,☒No☒Yes,☐No☐Yes,☒No☐Yes,☒No 5500–5700MHz☐Yes,☒No☒Yes,☐No☐Yes,☒No☐Yes,☒No 5510–5670MHz☐Yes,☒No☒Yes,☐No☐Yes,☒No☐Yes,☒No (3)Countrycodeselectionability-☐Yes,☒No Ifno,plsexplainhowwasimplemented:CountryisselectedasUSbydefaultandusercannot changethecountrycode. (4)Meet15.202requirement-☒Yes,☐No, plscheckbelow: ☐Amasterdeviceisdefinedasadeviceoperatinginamodeinwhichithasthecapabilitytotransmit withoutreceivinganenablingsignal.Inthismodeitisabletoselectachannelandinitiateanetwork bysendingenablingsignalstootherdevices ☒Aclientdeviceisdefinedasadeviceoperatinginamodeinwhichthetransmissionsofthedevice areundercontrolofthemaster.Adeviceinclientmodeisnotabletoinitiateanetwork. (5)Forclientdevicesthathavesoftwareconfigurationcontroltooperateindifferentmodes(active scanninginsomeandpassivescanninginothers)indifferentbands(deviceswithmultipleequipment classesorthosethatoperateonnon-DFSfrequencies)ormodulardeviceswhichconfigurethemodes ofoperationsthroughsoftware,theapplicationmustprovidesoftwareandoperationsdescriptionon howthesoftwareand/orhardwareisimplementedtoensurethatproperoperationsmodescannot bemodifiedbyenduseroraninstaller. ☐Apply,☒NoApply, (Ifapply,plshelptoprovideexplanationonhowitwasimplement(Byhardwareorsoftware,andhowsoftwarewascontrolled) Thedeviceconfigurationcannotbemodifiedbyuserasprogramisnotexposedtouserbyanymeans.Hardwaredoesnot allowUSBconnectionforuserwhichismusttochangetheconfiguration. Ifyouhaveanyquestions,pleasefeelfreetocontactmeattheaddressshownbelow. Yourssincerely, Signatory: Contactname:SEISHIMIKI Title:CDO
Label： Model：PTS2 FCC ID:2BGXA-PTS2 IC ID:29572-PTS2 Location： settings- Device/License Info- Regulatory on the back
MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24040308S01 Annex C Plots of System Performance Check Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024/6/20 System Check_750MHz_Head Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750 Medium parameters used: f = 750 MHz; σ = 0.917 S/m; ε r = 42.562; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(9.85, 9.47, 8.84) @ 750 MHz; Calibrated: 2024/3/21 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2024/3/27 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) CW750/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.84 W/kg CW750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 51.28 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 3.04 W/kg SAR(1 g) = 2.18 W/kg; SAR(10 g) = 1.35 W/kg Smallest distance from peaks to all points 3 dB below = 15.3 mm Ratio of SAR at M2 to SAR at M1 = 64.3% Maximum value of SAR (measured) = 2.73 W/kg 0 dB = 2.73 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24040308S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024/6/23 System Check_900MHz_Head Communication System: UID 0, CW (0); Frequency: 900 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 900 MHz; σ = 0.972 S/m; ε r = 41.537; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(9.17, 9.05, 8.22) @ 900 MHz; Calibrated: 2024/3/21 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2024/3/27 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) CW900/Area Scan (71x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.57 W/kg CW900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 38.14 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 4.42 W/kg SAR(1 g) = 2.87 W/kg; SAR(10 g) = 1.94 W/kg Smallest distance from peaks to all points 3 dB below = 14.6 mm Ratio of SAR at M2 to SAR at M1 = 63.4% Maximum value of SAR (measured) = 3.81 W/kg 0 dB = 3.81 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24040308S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024/6/24 System Check_900MHz_Head Communication System: UID 0, CW (0); Frequency: 900 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 900 MHz; σ = 0.957 S/m; ε r = 41.286; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(9.17, 9.05, 8.22) @ 900 MHz; Calibrated: 2024/3/21 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2024/3/27 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) CW900/Area Scan (71x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.62 W/kg CW900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 37.18 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 4.12 W/kg SAR(1 g) = 2.91 W/kg; SAR(10 g) = 1.91 W/kg Smallest distance from peaks to all points 3 dB below = 14.6 mm Ratio of SAR at M2 to SAR at M1 = 62.4% Maximum value of SAR (measured) = 3.72 W/kg 0 dB = 3.72 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24040308S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024/6/19 System Check_18 00MHz_Head Communication System: UID 0, CW (0); Frequency: 1800 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1800 MHz; σ = 1.417 S/m; ε r = 39.532; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.94, 7.98, 7.32) @ 1800 MHz; Calibrated: 2024/3/21 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2024/3/27 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) CW1800/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 15.1 W/kg CW1800/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 91.42 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 18.6 W/kg SAR(1 g) = 10.25 W/kg; SAR(10 g) = 5.32 W/kg Smallest distance from peaks to all points 3 dB below = 10.7 mm Ratio of SAR at M2 to SAR at M1 = 57.9% Maximum value of SAR (measured) = 15.3 W/kg 0 dB = 15.3 W/kg = 11.85 dBW/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A,…
Text truncated - open the document above for the full version.
MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24040308S01 Annex D Plots of Maximum SAR Test Results Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024/6/22 WCDMA Band II_RMC 12.2Kbps_Back Side_10mm_Ch9538 Communication System: UID 0, UMTS-FDD (0); Frequency: 1907.6 MHz;Duty Cycle: 1:1 Medium: HSL_1900 Medium parameters used: f = 1908 MHz; σ = 1. 398 S/m; ε r = 39.873; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.73, 7.72, 7.11) @ 1907.6 MHz; Calibrated: 2024/3/21 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2024/3/27 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Ch9538/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.20 W/kg Ch9538/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 15.35 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 1.40 W/kg SAR(1 g) = 0.823 W/kg; SAR(10 g) = 0.459 W/kg Smallest distance from peaks to all points 3 dB below = 12.9 mm Ratio of SAR at M2 to SAR at M1 = 58.8% Maximum value of SAR (measured) = 1.11 W/kg 0 dB = 1.11 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24040308S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024/6/23 WCDMA Band V_RMC 12.2Kbps_Back Side_10mm_Ch4233 Communication System: UID 0, UMTS-FDD (0); Frequency: 846.6 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 847 MHz; σ = 0. 94 S/m; ε r = 41.631; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(9.17, 9.05, 8.22) @ 846.6 MHz; Calibrated: 2024/3/21 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2024/3/27 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Ch4233/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.10 W/kg Ch4233/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 30.93 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 1.16 W/kg SAR(1 g) = 0.809 W/kg; SAR(10 g) = 0.573 W/kg Smallest distance from peaks to all points 3 dB below = 13.2 mm Ratio of SAR at M2 to SAR at M1 = 69.4% Maximum value of SAR (measured) = 1.00 W/kg 0 dB = 1.00 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24040308S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024/6/19 LTE Band 4_20MHz_QPSK_1RB_0Offset_Back Side_10mm_Ch20300 Communication System: UID 0, LTE (0); Frequency: 1745 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1745 MHz; σ = 1.3 69 S/m; ε r = 39.91; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.94, 7.98, 7.32) @ 1745 MHz; Calibrated: 2024/3/21 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2024/3/27 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Ch20300/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.28 W/kg Ch20300/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 15.62 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 1.31 W/kg SAR(1 g) = 0.829 W/kg; SAR(10 g) = 0.495 W/kg Smallest distance from peaks to all points 3 dB below = 13.6 mm Ratio of SAR at M2 to SAR at M1 = 63.1% Maximum value of SAR (measured) = 1.06 W/kg 0 dB = 1.06 W/kg MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24040308S01 Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2024/6/23 LTE Band 5_10MHz_QPSK_1RB_0Offset_Back Side_10mm_Ch20600 Communication System: UID 0, LTE (0); Frequency: 844 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 844 MHz; σ = 0.939 S/m; ε r = 41.648; ρ = 1000 kg /m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(9.17, 9.05, 8.22) @ 844 MHz; Calibrated: 2024/3/21 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1643; Calibrated: 2024/3/27 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Ch20600/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.13 W/kg Ch20600/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 32.02 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 1.20 W/kg SAR(1 g) = 0.847 W/kg; SAR(10 g) = 0.579 W/kg Smallest distance from peaks to all points 3 dB below = 25.6 mm Ratio of SAR at M2 to SAR at M1 = 71.2%…
Text truncated - open the document above for the full version.
MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24040308S01 Annex E Conducted Power Note: Conducted power unit: dBm The target power was recorded in the manufacturer’s document. 926294009538413241824233 966298009938435744074458 1852.418801907.6826.4836.4846.6 3GPP Rel 99RMC 12.2Kbps22.0522.0822.0223.0023.0723.0923.0224.00 3GPP Rel 5HSDPA Subtest-1 20.7520.6720.73 21.50 21.9221.8921.91 23.00 3GPP Rel 5HSDPA Subtest-2 20.7820.6320.73 21.50 21.8221.8621.83 23.00 3GPP Rel 5HSDPA Subtest-3 20.3120.1120.21 21.00 21.3521.3621.29 22.00 3GPP Rel 5HSDPA Subtest-4 20.3020.1320.20 21.00 21.3221.3521.29 22.00 3GPP Rel 8DC-HSDPA Subtest-1 20.7420.6120.71 21.50 21.8921.9321.87 23.00 3GPP Rel 8DC-HSDPA Subtest-2 20.7820.6320.72 21.50 21.9521.8421.73 23.00 3GPP Rel 8DC-HSDPA Subtest-3 20.3020.1520.22 21.00 21.3121.3421.30 22.00 3GPP Rel 8DC-HSDPA Subtest-4 20.2920.1120.13 21.00 21.3021.4321.27 22.00 3GPP Rel 6HSUPA Subtest-1 20.2720.1120.19 21.00 21.3221.3721.32 22.00 3GPP Rel 6HSUPA Subtest-2 20.7920.5920.72 21.50 21.8921.8721.88 23.00 3GPP Rel 6HSUPA Subtest-3 19.7919.5919.71 20.50 20.8820.8920.84 22.00 3GPP Rel 6HSUPA Subtest-4 20.7720.5820.68 21.50 21.8721.9021.87 23.00 3GPP Rel 6HSUPA Subtest-5 19.7719.6219.68 20.50 20.8620.9320.84 22.00 3GPP Rel 7 HSPA+ (16QAM) Subtest-1 19.7019.6419.69 20.50 20.8220.8820.83 22.00 Cable Loss0.8Cable Loss0.6 Max.22.08Max.23.09 Conducted Power BandWCDMA Band II (dBm)WCDMA Band V (dBm) TX Channel Rx Channel Frequency (MHz) Tune-up Limit (dBm) Tune-up Limit (dBm) Attenuator Mode MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24040308S01 BW [MHz]ModulationRB SizeRB Offset Low Channel Middle Channel High Channel BW [MHz] ModulationRB SizeRB Offset Low Channel Middle Channel High Channel 187001890019100200502017520300 18601880190017201732.51745 20QPSK1023.1223.1623.0920QPSK1023.1523.1923.10 20QPSK14923.0823.1323.0720QPSK14923.0223.1523.06 20QPSK19923.0723.0323.0420QPSK19923.1323.0223.01 20QPSK50022.2622.2922.2520QPSK50022.1422.2022.16 20QPSK502422.0522.2522.2020QPSK502422.1322.1222.11 20QPSK505022.0022.1422.0920QPSK505022.0522.0622.09 20QPSK100022.1222.1822.1520QPSK100022.0922.1022.04 2016QAM1022.1922.2822.222016QAM1022.2322.2622.15 2016QAM14922.0822.0922.232016QAM14922.0822.0722.13 2016QAM19922.0322.1122.142016QAM19922.1122.0122.09 2016QAM50021.1721.2621.242016QAM50021.1021.2121.19 2016QAM502421.0721.0821.182016QAM502421.1621.0621.06 2016QAM505021.0821.1721.102016QAM505021.1721.1321.13 2016QAM100021.1021.1821.142016QAM100021.0221.1021.08 2064QAM1021.1821.2721.262064QAM1021.0921.2321.21 2064QAM14921.1921.2321.212064QAM14921.0421.1821.13 2064QAM19921.0821.2021.142064QAM19921.0521.1421.08 2064QAM50020.1320.2420.202064QAM50020.0320.1920.14 2064QAM502420.1020.1020.122064QAM502420.1320.0320.09 2064QAM505020.1420.1620.182064QAM505020.0520.0720.10 2064QAM100020.0820.1320.072064QAM1000 20.1020.1320.02 18675 1890019125200252017520325 1857.518801902.51717.51732.51747.5 15QPSK1023.1123.1223.0815QPSK1023.1323.1623.07 15QPSK13723.0623.0823.0515QPSK13723.1023.0423.08 15QPSK17423.0423.0623.0115QPSK17422.9523.1122.90 15QPSK36022.2222.2622.2315QPSK36022.1922.2722.11 15QPSK362022.0222.1022.2215QPSK362022.0422.2122.22 15QPSK363922.0522.0322.1515QPSK363922.1122.1421.93 15QPSK75022.1822.2022.1115QPSK75021.9722.0122.14 1516QAM1022.2222.2922.131516QAM1022.1322.2622.17 1516QAM13722.2422.1222.201516QAM13722.1022.2522.20 1516QAM17422.1222.2622.161516QAM17422.0422.2222.12 1516QAM36021.2021.2821.261516QAM36021.1521.2321.17 1516QAM362021.1821.2721.081516QAM362021.0021.0721.17 1516QAM363920.9721.1521.031516QAM363921.1021.1320.98 1516QAM75021.0921.1621.001516QAM75021.0321.1221.17 1564QAM1021.1121.2521.201564QAM1021.2121.2221.16 1564QAM13721.1021.0521.011564QAM13721.0321.0821.19 1564QAM17421.0121.1221.091564QAM17421.1921.1121.05 1564QAM36020.2320.2620.181564QAM36020.2020.2420.16 1564QAM362020.0520.2419.971564QAM362020.1720.0420.21 1564QAM363920.1619.9719.981564QAM363920.0920.1520.15 1564QAM75020.0820.1620.011564QAM75019.9820.2220.04 186501890019150200002017520350 18551880190517151732.51750 10QPSK1023.0723.1423.1110QPSK1023.1723.1623.12 10QPSK12523.0523.0923.0810QPSK12523.0823.0223.08 10QPSK14922.98 23.1222.9910QPSK14923.1522.9923.00 10QPSK25022.1822.2722.2710QPSK25022.1222.2622.24 10QPSK251222.0622.1122.1410QPSK251222.2322.1922.06 10QPSK252522.0422.0522.0110QPSK252522.0522.1222.15 10QPSK50022.0522.2222.1310QPSK50022.1022.2722.25 1016QAM1022.1522.2922.211016QAM1022.1522.2222.17 1016QAM12522.1422.2122.001016QAM12522.0322.1422.12 1016QAM14922.1922.0822.091016QAM14921.9422.1321.98 1016QAM25021.1721.2621.211016QAM25021.2021.2821.14 1016QAM251221.0021.2121.151016QAM251221.2321.0221.12 1016QAM252520.9921.1221.181016QAM252521.1621.0921.17 1016QAM50021.1621.2421.091016QAM50021.0221.2321.21 1064QAM1021.2121.2421.231064QAM1021.2721.1821.27 1064QAM12521.2021.1621.181064QAM12521.2021.1121.26 1064QAM14921.0721.1321.041064QAM14921.1021.1721.16 1064QAM25020.0720.2520.191064QAM25020.0520.2420.11 1064QAM251220.0620.0520.111064QAM251220.2320.1620.17 1064QAM252519.9920.1620.041064QAM252520.1420.2220.10 1064QAM50019.9720.0120.081064QAM50020.0420.2420.18 186251890019175199752017520375 1852.518801907.51712.51732.51752.5 5QPSK1023.0523.1623.105QPSK1023.0923.1623.14 5QPSK11223.1323.1123.115QPSK11223.0123.0623.05 5QPSK12423.0123.0523.035QPSK12423.0723.0623.07 5QPSK12022.2022.3022.125QPSK12022.2422.2822.10 5QPSK12722.1722.2722.185QPSK12722.1022.3222.17 5QPSK1213 22.1422.0922.025 QPSK121322.1822.2521.98 5QPSK25022.0522.2022.105QPSK25022.1922.2222.27 51…
Text truncated - open the document above for the full version.
MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24040308S01 Annex F DASY Calibration Certificate
Annual validation for test lab. Appendix Annual validation for Test Lab. General calibration information Date 2023.08.17 Test Laboratory ShenZhen Morlab Communications Technology Co., Ltd. Antenna serial No. D750V3-SN:1223 Antenna Parameters with Head TSL Impedance, transformed to feed point 48.542Ω+0.860jΩ Return Loss -35.300dB General Antenna Parameters and Design Electrical Delay (one direction) 1.276 ns After long term use with 100W radiated power，only a slight warming of the dipole near the feed point can be measured The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard No excessive force must be applied to the dipole arm， because they might bend or the soldered connections near the feed point may be damaged . Annual validation for test lab. Annual validation for test lab. Appendix Impedance Measurement Plot for Head TSL
Annual validation for test lab. Appendix Annual validation for Test Lab. General calibration information Date 2022.12.15 Test Laboratory ShenZhen Morlab Communications Technology Co., Ltd. Antenna serial No. D900V2-SN: 1d064 Antenna Parameters with Head TSL Impedance, transformed to feed point 48.406Ω-1.16jΩ Return Loss -33.947dB General Antenna Parameters and Design Electrical Delay (one direction) 1.276 ns After long term use with 100W radiated power，only a slight warming of the dipole near the feed point can be measured The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard No excessive force must be applied to the dipole arm， because they might bend or the soldered connections near the feed point may be damaged . Annual validation for test lab. Annual validation for test lab. Appendix Impedance Measurement Plot for Head TSL Annual validation for test lab. Appendix Annual validation for Test Lab. General calibration information Date 2023.12.12 Test Laboratory ShenZhen Morlab Communications Technology Co., Ltd. Antenna serial No. D900V2-SN: 1d064 Antenna Parameters with Head TSL Impedance, transformed to feed point 49.181Ω-1jΩ Return Loss -37.703dB General Antenna Parameters and Design Electrical Delay (one direction) 1.276 ns After long term use with 100W radiated power，only a slight warming of the dipole near the feed point can be measured The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard No excessive force must be applied to the dipole arm， becaus…
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 6.65 mW |
POCKETALK S2 Plus
Equipment Class
PCT - PCS Licensed Transmitter worn on body