2BH28-55BDL6052HLCD Monitor

BOE Digital Technology Co., Ltd. Certification Designating a US Agent for Service of Process To: Federal Communications Commission Date: 2024.08.07 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BH28-55BDL6052H BOE Digital Technology Co., Ltd. (“the applicant”) certifies that as of the date of the filing of the application, EMCTEK (“the agent”) is our designated U.S. agent. We acknowledge the applicant’s consent and the designated agent for service of process’s obligation to accept service of process. The applicant accepts to maintain an agent for service of process for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. APPLICANT Company Name: BOE Digital Technology Co., Ltd. Contact Person: Feng Bai Address: Room 101, 3rd Floor, Building 1, No. 12 Xihuan Middle Road, BDA Beijing, China Tel.: +86-13521081663 Email: [email protected] FCC FRN: 0035757715 U.S. Agent Company Name: EMCTEK Contact Person: Fang Liu Address: 11788 Big Canyon Ln, San Diego, CA 92131 USA Tel.: / Email: [email protected] FCC FRN: 0033401829 Sincerely yours, The Applicant The Agent Company Name BOE Digital Technology Co., Ltd. EMCTEK Contact Person Feng Bai Fang Liu Signature

BOE Digital Technology Co., Ltd. Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 2024.08.05 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: 2BH28-55BDL6052H BOE Digital Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Feng Bai Title: Manager Address: Room 101, 3rd Floor, Building 1, No. 12 Xihuan Middle Road, BDA Beijing, China Tel.: +86-13521081663 Email: [email protected]

BOE Digital Technology Co., Ltd. Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 2024.08.05 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: 2BH28-55BDL6052H BOE Digital Technology Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Applicant Signature Printed Name: Feng Bai Title: Manager Address: Room 101, 3rd Floor, Building 1, No. 12 Xihuan Middle Road, BDA Beijing, China Tel.: +86-13521081663 Email: [email protected]

Standard Form Sample Agency Request Letter Number: MS-0004558 Version: 2.1 Page: 1 of 1 Printed: August 23, 2024 Approved Documents Valid 2 Days Verify as current revision when invalid. This document is issued in strict confidence and shall not be reproduced, copied, or otherwise used without the expressed written consent of the Management of TÜV Rheinland Industrial Solutions, Inc. The following is a sample Agency Request letter, which needs to be completed on company letterhead, signed by an authorized Applicant/Agent, and submitted to TÜV Rheinland. Authority to Act as Agent Date: 2024.08.05 TUV Rheinland of North America, Inc. 1279 Quarry Ln., Ste. A Pleasanton, CA 94566 To Whom It May Concern: I appoint Mr. Storm Shu to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with ___Applicant: BOE Digital Technology Co., Ltd. Address: Room 101, 3rd Floor, Building 1, No. 12 Xihuan Middle Road, BDA Beijing, China___. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____2025.08.04_____ By: __________________________ ________ Feng Bai ___________ (Signature) (Print name) Title: ________ Manager ___________ Telephone:____ +86-13521081663 _______ On behalf of: ___BOE Digital Technology Co., Ltd. _____ (Company Name)

Request for Confidentiality Letter MS-0044715 Page 1 of 1 Revision 1 Legal Scope: Global Business Scope: Cross Business Process Scope: Cross Process BOE Digital Technology Co., Ltd. Date: 2024.08.05 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: 2BH28-55BDL6052H Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Test Setup*** Short Term Permanent User’s Manual*** Short Term Permanent Part List/ Antenna Construction Short Term Permanent Software Security Information BOE Digital Technology Co., Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: _____________________________Manager__________ _______Feng Bai ____________ (Signature/Title) (Print name)

BOE Digital Technology Co., Ltd. Differences Declaration Date: 2024.08.27 Subject: Confidentiality Request for FCC ID: 2BH28-55BDL6052H To whom concern, We company BOE Digital Technology Co., Ltd. Here by declares: The product model(s) 55BDL6052H, 55BDL6052H/05, 55BDL6052H/12, 55BDL6052H/** (*=0-9 or A-Z) All models are identical to each other except for model name and marketing purpose. Sincerely yours, Signature: Name: Feng Bai Company: BOE Digital Technology Co., Ltd. Address: Room 101, 3rd Floor, Building 1, No. 12 Xihuan Middle Road, BDA Beijing, China Phone: +86-13521081663 Fax: / E-Mail: [email protected]

Label Labellocation

Produkte Products Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 22 von 23 Page 22 of 23 6 Safety Human Exposure 6.1 Radio Frequency Exposure Compliance 6.1.1 Electromagnetic Fields RESULT: Pass Test Specification Test standard : CFR47 FCC Part 2: Section 2.1091 CFR47 FCC Part 1: Section 1.1310 FCC KDB Publication 447498 D01 v06 RSS-102 Issue 5 March 2015 ➢ FCC requirements FCC requirement: Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 20cm normally can be maintained between the user and the device. Power Density: S (mW/cm 2 ) = PG/4πR 2 or EIRP/4πR 2 Where: S = power density (mW/cm 2 ) P = power input to the antenna (mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (cm) The nominal maximum conducted output power specified: Wi-Fi 802.11 b/g/n: 17.77 dBm From the peak RF output power, the minimum mobile separation distance, d=20 cm, as well as the antenna gain (1.9 dBi for Wi-Fi 802.11 b/g/n), the RF power density can be calculated as below: For Wi-Fi 802.11 b/g/n: S (mW/cm 2 ) = PG/4πR 2 = 0.018 mW/cm 2 Limits for Maximum Permissible Exposure (MPE) according to FCC Part 1.1310: 1.0 mW/cm 2 “RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons.”

Antenna Specification 1. Antenna Describe Antenna Manufacturer BOE Digital Technology Co., Ltd. Antenna Address Room 101, 3rd Floor, Building 1, No. 12 Xihuan Middle Road, BDA Beijing, China Antenna Model ISM 2.4GHz Antenna Type External Antenna Antenna Gain 1.96dBi Max Frequency Rang 2400-2500MHz VSWR ≤2 Input Impedance 50Ω 2. External View Drawing RP-SMA REFER TO INTERNAL PHOTOS 3. Measurement Result 3.1 Test Setup 3.2 S11 Parameter 3.3 Antenna test data Frequency (MHz) Efficiency (%) Antenna Gain (dBi) 2400 67.19 1.41 2410 70.70 1.62 2420 72.19 1.75 2430 71.42 1.69 2440 74.72 1.92 2450 73.79 1.83 2460 76.49 1.92 2470 76.53 1.95 2480 76.86 1.96 2490 75.63 1.87 2500 76.34 1.82 3.4 Antenna test diagram

TUV Rheinland (Guangdong) Ltd. No.199 Kezhu Road, Guangzhou Science City, Guangzhou 510663, Guangdong Province P.R. China Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN24LPG8 001 Auftrags-Nr.: Order no.: 170359239 Seite 1 von 23 Page 1 of 23 Kunden-Referenz-Nr.: Client Reference No.: N/A Auftragsdatum: Order date.: 2023.12.14 Auftraggeber: Client: BOE Digital Technology Co., Ltd. Room 101, 3rd Floor, Building 1, No. 12 Xihuan Middle Road, BDA Beijing, China Prüfgegenstand: Test item: LCD Monitor Bezeichnung / Typ-Nr.: Identification / Type No.: 55BDL6052H, 55BDL6052H/05, 55BDL6052H/12, 55BDL6052H/** (*=0-9 or A-Z) Auftrags-Inhalt: Order content: TÜV Rheinland FCC approval Prüfgrundlage: Test specification: CFR47 FCC Part 15: Subpart C Section 15.247 CFR47 FCC Part 15: Subpart C Section 15.207 CFR47 FCC Part 15: Subpart C Section 15.209 FCC KDB Publication 447498 D01 v06 Wareneingangsdatum: Date of sample receipt: 2023.12.14 Prüfmuster-Nr.: Test sample No.: 170359239-001 Prüfzeitraum: Testing period: Refer to test report Ort der Prüfung: Place of testing: Refer to section 2.1 Prüflaboratorium: Testing laboratory: TÜV Rheinland (Guangdong) Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: Amy Wang genehmigt von: authorized by: Storm Shu Datum: Date:2024.08.27 Ausstellungs Datum: Issue date:2024.08.27 Stellung/Position: Sachverständige(r)/Expert Stellung/Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: 2BH28-55BDL6052H Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhalt P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specifications(s) F(ail) = failed a.m. test specifications(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: CN24LPG8 001 Test report no.: Seite 2 von 23 Page 2 of 23 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2021, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Rule” and “Simple Acceptance” in accordance with ILAC G8:2019 and IEC Guide 115:2021, …

Text truncated - open the document above for the full version.

Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 1 von 127 Page 1 of 127 Maximum conducted output power Test Result Average Test Mode Antenna Frequency[MHz] Average power [dBm] Duty Cycle [%] DC Factor [dBm] Result [dBm] Limit [dBm] Verdict 11B Ant1 2412 17.76 99.76 0.01 17.77 ≤30.00 PASS 2437 17.34 99.12 0.04 17.38 ≤30.00 PASS 2462 17.43 99.52 0.02 17.45 ≤30.00 PASS 11G Ant1 2412 14.37 94.50 0.25 14.62 ≤30.00 PASS 2437 14.68 97.63 0.10 14.78 ≤30.00 PASS 2462 14.52 93.67 0.28 14.80 ≤30.00 PASS 11N20SISO Ant1 2412 14.36 98.46 0.07 14.43 ≤30.00 PASS 2437 14.62 91.87 0.37 14.99 ≤30.00 PASS 2462 13.83 93.20 0.31 14.14 ≤30.00 PASS 11N40SISO Ant1 2422 13.27 90.48 0.43 13.70 ≤30.00 PASS 2437 13.17 84.82 0.72 13.89 ≤30.00 PASS 2452 13.64 91.35 0.39 14.03 ≤30.00 PASS Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 2 von 127 Page 2 of 127 Test Graphs Average 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 3 von 127 Page 3 of 127 11G_Ant1_2412 11G_Ant1_2437 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 4 von 127 Page 4 of 127 11G_Ant1_2462 11N20SISO_Ant1_2412 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 5 von 127 Page 5 of 127 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 6 von 127 Page 6 of 127 11N40SISO_Ant1_2422 11N40SISO_Ant1_2437 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 7 von 127 Page 7 of 127 11N40SISO_Ant1_2452 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 8 von 127 Page 8 of 127 Duty Cycle Test Result TestMode Antenna Frequency[MHz] Transmission Duration [ms] Transmission Period [ms] Duty Cycle [%] 11B Ant1 2412 12.42 12.45 99.76 2437 12.42 12.53 99.12 2462 12.42 12.48 99.52 11G Ant1 2412 2.06 2.18 94.50 2437 2.06 2.11 97.63 2462 2.07 2.21 93.67 11N20SISO Ant1 2412 1.92 1.95 98.46 2437 1.92 2.09 91.87 2462 1.92 2.06 93.20 11N40SISO Ant1 2422 0.95 1.05 90.48 2437 0.95 1.12 84.82 2452 0.95 1.04 91.35 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 9 von 127 Page 9 of 127 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 10 von 127 Page 10 of 127 11G_Ant1_2412 11G_Ant1_2437 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 11 von 127 Page 11 of 127 11G_Ant1_2462 11N20SISO_Ant1_2412 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 12 von 127 Page 12 of 127 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 13 von 127 Page 13 of 127 11N40SISO_Ant1_2422 11N40SISO_Ant1_2437 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 14 von 127 Page 14 of 127 11N40SISO_Ant1_2452 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 15 von 127 Page 15 of 127 Maximum power spectral density Test Result TestMode Antenna Frequency[MHz] Result[dBm/3-100kHz] Limit[dBm/3kHz] Verdict 11B Ant1 2412 -11.40 ≤8.00 PASS 2437 -11.84 ≤8.00 PASS 2462 -11.85 ≤8.00 PASS 11G Ant1 2412 -14.94 ≤8.00 PASS 2437 -15.71 ≤8.00 PASS 2462 -15.44 ≤8.00 PASS 11N20SISO Ant1 2412 -16.41 ≤8.00 PASS 2437 -15.32 ≤8.00 PASS 2462 -16.62 ≤8.00 PASS 11N40SISO Ant1 2422 -18.59 ≤8.00 PASS 2437 -18.46 ≤8.00 PASS 2452 -18.48 ≤8.00 PASS Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 16 von 127 Page 16 of 127 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 17 von 127 Page 17 of 127 11G_Ant1_2412 11G_Ant1_2437 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 18 von 127 Page 18 of 127 11G_Ant1_2462 11N20SISO_Ant1_2412 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 19 von 127 Page 19 of 127 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 20 von 127 Page 20 of 127 11N40SISO_Ant1_2422 11N40SISO_Ant1_2437 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 21 von 127 Page 21 of 127 11N40SISO_Ant1_2452 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 22 von 127 Page 22 of 127 -6dB Bandwidth Test Result TestMode Antenna Frequency[MHz] DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 9.520 2407.440 2416.960 0.5 PASS 2437 9.040 2432.480 2441.520 0.5 PASS 2462 9.520 2457.480 2467.000 0.5 PASS 11G Ant1 2412 16.360 2403.840 2420.200 0.5 PASS 2437 16.320 2428.840 2445.160 0.5 PASS 2462 16.320 2453.840 2470.160 0.5 PASS 11N20SISO Ant1 2412 17.520 2403.240 2420.760 0.5 PASS 2437 17.080 2428.440 2445.520 0.5 PASS 2462 17.600 2453.200 2470.800 0.5 PASS 11N40SISO Ant1 2422 35.280 2404.480 2439.760 0.5 PASS 2437 35.280 2419.240 2454.520 0.5 PASS 2452 35.280 2434.480 2469.760 0.5 PASS Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 23 von 127 Page 23 of 127 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 24 von 127 Page 24 of 127 11G_Ant1_2412 11G_Ant1_2437 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 25 von 127 Page 25 of 127 11G_Ant1_2462 11N20SISO_Ant1_2412 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 26 von 127 Page 26 of 127 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 Produkte Products Appendix 2 Prüfbericht - Nr.: Test Report No. CN24LPG8 001 Seite 27 von 127 Page 27 of 127 11N40SISO_Ant1_2422 11N40SISO_Ant1_2437 Produkte Products Appendix 2 Prüfbe…

Text truncated - open the document above for the full version.