2BH2P-347-30287.75IN WHITE RGBCCT TB LMP

LED RGBCCT Table Lamp Model Number: 347-3028 PACKAGE CONTENTS Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package contents list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble, install or operate the product. PREPARATION SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING Do not plug lamp into an electrical outlet before installation is completed. CAUTION- This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. DO NOT alter the plug. AC ONLY. To reduce the risk of electric shock, DO NOT use the product if power cord is damaged or broken. Be careful NOT to damage any wiring during installation. CAUTION-The use of a bulb with higher wattage than specified may cause electrical shock or fire hazard. Questions, problems, missing par ts? Bef or e ret ur ni ng to your ret ai ler , call our customer service at 1-800-887-6326 Monday – Friday 9: 00 a. m. – 5:00 p. m. CST Page 1 of 11 260706 ASSEMBLY INSTRUCTIONS Connect the cable to the base, and plug the adaptor into the outlet. Turn on the light with the button switch on the bottom of the lamp. 1 1. Manual Control by using button switch. Base Button Switch WAY TO OPERATION Page 2 of 11 260706 Cable Adaptor 1 a. Short press “ ” for on/off; Long press for dimming. b. Short press “ ” to switch 2700K, 5700K and RGB; Long press and hold for 5 seconds to reset and start connecting to the network. REGISTRATION / LOGIN / PASSWORD RETRIEVAL 2. Click "Sign up" to enter the next page shown in Fig.3. 1. Download the Smart Life APP from the Apple App Store or Android Google play store. Registration If you do not have the app account, you may choose to register. The registration process is described on this page and the next. Click "Agree" to proceed to the registration page. 3. The system will identify automatically the country/region you are in, or you may choose to select manually a country/region. Enter your email and click "Get Verification Code" and enter the verification code you received, then enter the password and click "Completed" to finish registration as shown in Fig.3, Fig.3a, Fig.3b. Account ID + Password Login Smart Life Login. If you already have an app account, click "Log in" to proceed to the login page. a. The system will identify automatically the country / region you are in, or you may also choose to select manually a country / region . b. Enter the email you have registered and enter the password in to log in. 1. Enter the email you have registered and enter the password into log in as shown in Fig.1, Fig. 1a. Page 3 of 11 260706 USER GUIDE Auto Scan Ensure the light on the smart device is flashing rapidly. If it is not, please choose one of below steps to operate: 1. Long press and hold " " at the inline switch for 5 seconds to reset and start connecting to the network. 2. Use the wall switch by turning it off, then on, then off again, then on, and finally off and on once more (off-on-off-on-off-on) to trigger the flashing mode. The Smart Life app supports two configuration methods: "Add Manually" and "Auto Scan". Ensure Bluetooth is turned on and connect to a 2.4GHz Wi-Fi network before linking the lights with the app. 1. Click "+" and "Add Device" at the top right corner of the App home page shown in Fig.1, and enter the next page shown in Fig.2. 2. Click "Add" to enter the next page shown in Fig3. 3. Enter the Wi-Fi account and password and click "Next" to enter the next page shown in Fig.4. Note: The Wi-Fi account and password in the APP must be the same as on the mobile phone. 3 FW33-ambient lighting Page 4 of 11 260706 USER GUIDE (continued) Add Manually mode 4 1. Click "+" and "Add Device" at the top right corner of the App home page upper right corner and enter the next page shown in Fig.2. 2. Click "Lighting" to enter the next page shown in Fig3. 3. Click "Strip Lights (BLE+Wi-Fi)" to enter the next page shown in Fig.4. 4. Click "Confirm the lamplight is blinking or breathing" to enter the next page shown in Fig.5. Note: Ensure the light on the smart device is flashing rapidly. If it is not, please choose one of below steps to operate: 1. Long press and hold " " at the inline switch for 5 seconds to reset and start connecting to the network. 2. Use the wall switch by turning it off, then on, then off again, then on, and finally off and on once more (off-on-off-on-off-on) to trigger the flashing mode. 4c 4. Once connected, the App will enter another page. Click "Done" to complete connecting as shown in Fig.4a, Fig.4b. 4b FW33-ambient lighting 4a FW33-ambient lighting Page 5 of 11 260706 USER GUIDE (continued) 5. Select the Wi-Fi in your home, enter the Wi-Fi password shown in Fig.5. Click "Next" to enter the next page shown in Fig.6. 6. As shown in Fig.6. 7. As shown in Fig.7. 8. Click "Done" to complete the connecting as shown in Fig .8 and Fig. 8a. ARGB-MIC-Light ARGB-MIC-Light Page 6 of 11 260706 USER GUIDE (continued) Light Mode Control Device Note: After the device is successfully connected, the paired device will be displayed on the main interface. Click to enter the White light interface (See Fig.4). Click to enter the RGB light interface (See Fig.4). Click to enter the Scene mode interface (See Fig.4). Click to enter the Music mode interface (See Fig.4). 1. When the device is online, it supports quick operations. 2. When the device is offline, "offline" is displayed (See Fig. 2). At this time, the device cannot be operated. At this time, you can check whether the device has been successfully powered on. A…

Text truncated - open the document above for the full version.

Cononlux Technology Co, Ltd 2026-08-07 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2B H2P-347-3028) [Cononlux Technology Co, Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, Sam Zeng manager Cononlux Technology Co., Ltd Cononlux Technology Co, Ltd 2026-08-07 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2B H2P-347-3028) [Cononlux Technology Co, Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Sam Zeng manager Cononlux Technology Co., Ltd

Cononlux Technology Co., Ltd Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RF module and antenna, PCB layout, schematics and component. Only the models name are different. Product name FCC ID Model no. 7.75IN WHITE RGBCCT TB LMP 2BH2P-347-3028 FW33, 347-3028, TB3028WH, CL-FW33 Sincerely, Sam Zeng manager Cononlux Technology Co., Ltd

Cononlux Technology Co, Ltd 2026-08-07 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Guangdong Global Testing Technology Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Sam Zeng manager Cononlux Technology Co., Ltd

Cononlux Technology Co, Ltd 2026-08-07 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR ( EUT Name: 7.75" WHITE RGBCCT TB LMP /Model: FW33, 347-3028, TB3028WH, CL-FW33/FCC ID: 2BH2P-347-3028) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Block Diagram, Operational Description, Schematics) required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition). Please contact me if there is any information you may need. Sincerely, Sam Zeng manager Cononlux Technology Co., Ltd

External

Model： 347-3028 FCCID:2BH2P-347-3028 尺寸 ：10*20mm

Internal Photographs Antenna

RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in ß1.1307(b) FCC ID: 2BH2P-347-3028 EUT Specification EUT 7.75IN WHITE RGBCCT TB LMP Frequency band (Operating) BT: 2.402GHz ~ 2.480GHz BLE: 2.402GHz ~ 2.480GHz WIFI: 2.412GHz ~ 2.462GHz WIFI: 5.180GHz ~ 5.240GHz WIFI: 5.260GHz ~ 5.320GHz WIFI: 5.500GHz ~ 5.700GHz WIFI: 5.745GHz ~ 5.825GHz Device category Portable (<20cm separation) Mobile (>20cm separation) Exposure classification Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power 2.4G WIFI IEEE 802.11b: 13.15 dBm IEEE 802.11g: 12.42 dBm IEEE 802.11n-HT20: 11.81 dBm Antenna gain (Max) -0.23 dBi Evaluation applied MPE Evaluation SAR Evaluation Limits for Maximum Permissible Exposure(MPE) Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density(mW/cm 2 ) Average Time (A) Limits for Occupational/Control Exposures 300-1500 -- -- F/300 6 1500-100000 -- -- 5 6 2 / 3 (B) Limits for General Population/Uncontrol Exposures 300-1500 -- -- F/1500 6 1500-100000 -- -- 1 30 Friis transmission formula: Pd=(Pout*G)\(4*pi*R2) Where P d = Power density in mW/cm 2 , P out =output power to antenna in mW. G= gain of antenna in linear scale, Pi=3.1416 R= distance between observation point and center of the radiator in cm=20cm P d the limit of MPE, 1mW/cm 2 . If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. For multiple RF sources: Multiple RF sources are exempt if: in the case of fixed RF sources operating in the same time-averaging period, or of multiple mobile or portable RF sources within a device operating in the same time averaging period, if the sum of the fractional contributions to the applicable thresholds is less than or equal to 1 as indicated in the following equation Evaluated k : the maximum reported SAR or MPE of fixed, mobile, or portable RF source k either in the device or at the transmitter site from an existing evaluation at the location of exposure. Exposure Limit k : either the general population/uncontrolled maximum permissible exposure (MPE) or specific Absorption rate (SAR) limit for each fixed, mobile, or portable RF source k. 3 / 3 Measurement Result Operation Mode Channel Frequency (MHz) Max Measured Power (dBm) Tune up tolerance (dBm) Max tune up conducted power (dBm) Output Peak power (mW) Ant. Gain (dBi) Ant. Gain (numeric) Power density at 20cm (mW/ cm2) Power density Limits (mW/ cm2) Results 2.4GHz WIFI (802.11b) 2437 13.15 13±1 14 25.119 -0.23 0.948 0.004739 1 PASS No need to test SAR. Signature: Alan He Date: 2026-07-23

Appendix A Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT b 2412 Ant1 89.97 0.46 0.12 NVNT b 2437 Ant1 89.97 0.46 0.12 NVNT b 2462 Ant1 89.97 0.46 0.12 NVNT g 2412 Ant1 89.92 0.46 0.18 NVNT g 2437 Ant1 89.92 0.46 0.18 NVNT g 2462 Ant1 89.99 0.46 0.18 NVNT n20 2412 Ant1 87.94 0.56 6.1 NVNT n20 2437 Ant1 88.2 0.55 6.08 NVNT n20 2462 Ant1 88.2 0.55 6.08 2 / 42 Duty Cycle NVNT b 2412MHz Ant1 Duty Cycle NVNT b 2437MHz Ant1 3 / 42 Duty Cycle NVNT b 2462MHz Ant1 Duty Cycle NVNT g 2412MHz Ant1 4 / 42 Duty Cycle NVNT g 2437MHz Ant1 Duty Cycle NVNT g 2462MHz Ant1 5 / 42 Duty Cycle NVNT n20 2412MHz Ant1 Duty Cycle NVNT n20 2437MHz Ant1 6 / 42 Duty Cycle NVNT n20 2462MHz Ant1 7 / 42 Maximum Average Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Conducted Power (W) Limit Conducted(dBm) Verdict NVNT b 2412 Ant1 12.77 0.01892 30 Pass NVNT b 2437 Ant1 13.15 0.02065 30 Pass NVNT b 2462 Ant1 12.9 0.0195 30 Pass NVNT g 2412 Ant1 12.42 0.01746 30 Pass NVNT g 2437 Ant1 12.37 0.01726 30 Pass NVNT g 2462 Ant1 12.21 0.01663 30 Pass NVNT n20 2412 Ant1 11.81 0.01517 30 Pass NVNT n20 2437 Ant1 11.27 0.0134 30 Pass NVNT n20 2462 Ant1 11.55 0.01429 30 Pass 8 / 42 -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT b 2412 Ant1 9.082 0.5 Pass NVNT b 2437 Ant1 9.096 0.5 Pass NVNT b 2462 Ant1 9.096 0.5 Pass NVNT g 2412 Ant1 17.1 0.5 Pass NVNT g 2437 Ant1 10.31 0.5 Pass NVNT g 2462 Ant1 13.47 0.5 Pass NVNT n20 2412 Ant1 15.44 0.5 Pass NVNT n20 2437 Ant1 15.43 0.5 Pass NVNT n20 2462 Ant1 15.42 0.5 Pass 9 / 42 -6dB Bandwidth NVNT b 2412MHz Ant1 -6dB Bandwidth NVNT b 2437MHz Ant1 10 / 42 -6dB Bandwidth NVNT b 2462MHz Ant1 -6dB Bandwidth NVNT g 2412MHz Ant1 11 / 42 -6dB Bandwidth NVNT g 2437MHz Ant1 -6dB Bandwidth NVNT g 2462MHz Ant1 12 / 42 -6dB Bandwidth NVNT n20 2412MHz Ant1 -6dB Bandwidth NVNT n20 2437MHz Ant1 13 / 42 -6dB Bandwidth NVNT n20 2462MHz Ant1 14 / 42 Occupied Channel Bandwidth Condition Mode Frequency (MHz) Antenna 99% OBW (MHz) NVNT b 2412 Ant1 13.87 NVNT b 2437 Ant1 13.882 NVNT b 2462 Ant1 13.868 NVNT g 2412 Ant1 17.235 NVNT g 2437 Ant1 17.324 NVNT g 2462 Ant1 17.397 NVNT n20 2412 Ant1 17.699 NVNT n20 2437 Ant1 17.698 NVNT n20 2462 Ant1 17.704 15 / 42 OBW NVNT b 2412MHz Ant1 OBW NVNT b 2437MHz Ant1 16 / 42 OBW NVNT b 2462MHz Ant1 OBW NVNT g 2412MHz Ant1 17 / 42 OBW NVNT g 2437MHz Ant1 OBW NVNT g 2462MHz Ant1 18 / 42 OBW NVNT n20 2412MHz Ant1 OBW NVNT n20 2437MHz Ant1 19 / 42 OBW NVNT n20 2462MHz Ant1 20 / 42 Maximum Power Spectral Density Level Condition Mode Frequency (MHz) Antenna Conducted PSD (dBm/3kHz) Duty Factor (dB) Total PSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNT b 2412 Ant1 -19.23 0.46 -18.77 8 Pass NVNT b 2437 Ant1 -18.76 0.46 -18.3 8 Pass NVNT b 2462 Ant1 -19.34 0.46 -18.88 8 Pass NVNT g 2412 Ant1 -21.69 0.46 -21.23 8 Pass NVNT g 2437 Ant1 -21.35 0.46 -20.89 8 Pass NVNT g 2462 Ant1 -22 0.46 -21.54 8 Pass NVNT n20 2412 Ant1 -19.95 0.5 -19.45 8 Pass NVNT n20 2437 Ant1 -20.19 0.56 -19.63 8 Pass NVNT n20 2462 Ant1 -20.29 0.55 -19.74 8 Pass 21 / 42 PSD NVNT b 2412MHz Ant1 PSD NVNT b 2437MHz Ant1 22 / 42 PSD NVNT b 2462MHz Ant1 PSD NVNT g 2412MHz Ant1 23 / 42 PSD NVNT g 2437MHz Ant1 PSD NVNT g 2462MHz Ant1 24 / 42 PSD NVNT n20 2412MHz Ant1 PSD NVNT n20 2437MHz Ant1 25 / 42 PSD NVNT n20 2462MHz Ant1 26 / 42 Band Edge Condition Mode Frequency (MHz) Antenna Max Value (dBc) Limit (dBc) Verdict NVNT b 2412 Ant1 -40.65 -30 Pass NVNT b 2462 Ant1 -58.15 -30 Pass NVNT g 2412 Ant1 -38.45 -30 Pass NVNT g 2462 Ant1 -46.99 -30 Pass NVNT n20 2412 Ant1 -37.85 -30 Pass NVNT n20 2462 Ant1 -46.79 -30 Pass 27 / 42 Band Edge NVNT b 2412MHz Ant1 Ref Band Edge NVNT b 2412MHz Ant1 Emission 28 / 42 Band Edge NVNT b 2462MHz Ant1 Ref Band Edge NVNT b 2462MHz Ant1 Emission 29 / 42 Band Edge NVNT g 2412MHz Ant1 Ref Band Edge NVNT g 2412MHz Ant1 Emission 30 / 42 Band Edge NVNT g 2462MHz Ant1 Ref Band Edge NVNT g 2462MHz Ant1 Emission 31 / 42 Band Edge NVNT n20 2412MHz Ant1 Ref Band Edge NVNT n20 2412MHz Ant1 Emission 32 / 42 Band Edge NVNT n20 2462MHz Ant1 Ref Band Edge NVNT n20 2462MHz Ant1 Emission 33 / 42 Conducted RF Spurious Emission Condition Mode Frequency (MHz) Antenna Max Value (dBc) Limit (dBc) Verdict NVNT b 2412 Ant1 -43.67 -30 Pass NVNT b 2437 Ant1 -43.52 -30 Pass NVNT b 2462 Ant1 -43.74 -30 Pass NVNT g 2412 Ant1 -42.64 -30 Pass NVNT g 2437 Ant1 -42.56 -30 Pass NVNT g 2462 Ant1 -42.06 -30 Pass NVNT n20 2412 Ant1 -40.63 -30 Pass NVNT n20 2437 Ant1 -40.62 -30 Pass NVNT n20 2462 Ant1 -40.67 -30 Pass 34 / 42 Tx. Spurious NVNT b 2412MHz Ant1 Ref Tx. Spurious NVNT b 2412MHz Ant1 Emission 35 / 42 Tx. Spurious NVNT b 2437MHz Ant1 Ref Tx. Spurious NVNT b 2437MHz Ant1 Emission 36 / 42 Tx. Spurious NVNT b 2462MHz Ant1 Ref Tx. Spurious NVNT b 2462MHz Ant1 Emission 37 / 42 Tx. Spurious NVNT g 2412MHz Ant1 Ref Tx. Spurious NVNT g 2412MHz Ant1 Emission 38 / 42 Tx. Spurious NVNT g 2437MHz Ant1 Ref Tx. Spurious NVNT g 2437MHz Ant1 Emission 39 / 42 Tx. Spurious NVNT g 2462MHz Ant1 Ref Tx. Spurious NVNT g 2462MHz Ant1 Emission 40 / 42 Tx. Spurious NVNT n20 2412MHz Ant1 Ref Tx. Spurious NVNT n20 2412MHz Ant1 Emission 41 / 42 Tx. Spurious NVNT n20 2437MHz Ant1 Ref Tx. Spurious NVNT n20 2437MHz Ant1 Emission 42 / 42 Tx. Spurious NVNT n20 2462MHz Ant1 Ref Tx. Spurious NVNT n20 2462MHz Ant1 Emission

TRF No.: 04-E001-0B TRF Originator: GTG TRF Date: 2023-12-13 Web: www.gtggroup.com E-mail: [email protected] Tel.: 86-400 755 8988 CFR 47 FCC PART 15 SUBPART C TEST REPORT For 7.75IN WHITE RGBCCT TB LMP MODEL NUMBER: 347-3028, FW33, TB3028WH, CL-FW33 REPORT NUMBER: E04A26051247F00501 ISSUE DATE: July 23, 2026 FCC ID: 2BH2P-347-3028 Prepared for Cononlux Technology Co, Ltd 1-4F Building A5, A6, Langxin Industrial Park, Langxin Community, Shiyan Street, Bao'an District, Shenzhen Prepared by Guangdong Global Testing Technology Co., Ltd. Room 101-105, 203-210, Building 1, No.2, Keji 8 Road, Songshan Lake Park, Dongguan city, Guangdong, People’s Republic of China, 523808 This report is based on a single evaluation of the submitted sample(s) of the above mentioned product, it does not imply an assessment of the production of the products. This report shall not be reproduced, except in full, without the written approval of Guangdong Global Testing Technology Co., Ltd. REPORT NO.: E04A26051247F00501 Page 2 of 45 TRF No.: 04-E001-0B Global Testing , Great Quality. Revision History Rev. Issue Date Revisions Revised By V0 July 23, 2026 Initial Issue REPORT NO.: E04A26051247F00501 Page 3 of 45 TRF No.: 04-E001-0B Global Testing , Great Quality. Summary of Test Results Test Item Clause Limit/Requirement Result Antenna Requirement N/A FCC Part 15.203/15.247 (c) RSS-GEN Clause 6.8 Pass AC Power Line Conducted Emission ANSI C63.10-2020, Clause 6.2 FCC Part 15.207 RSS-GEN Clause 8.8 Pass Conducted Output Power ANSI C63.10-2020, Clause 11.9.2.3.2 FCC Part 15.247 (b)(3) RSS-247 Clause 6.3.2 Pass 6dB Bandwidth and 99% Occupied Bandwidth ANSI C63.10-2020, Clause 11.8.1 or 11.8.2 FCC Part 15.247 (a)(2) RSS-247 Clause 6.3.1(a) ISED RSS-Gen Clause 6.7 Pass Power Spectral Density ANSI C63.10-2020, Clause 11.10.5 FCC Part 15.247 (e) RSS-247 Clause 6.3.1(b) Pass Conducted Band edge and spurious emission ANSI C63.10-2020, Clause 11.11 FCC Part 15.247(d) RSS-247 Clause 6.6 Pass Radiated Band edge and Spurious Emission ANSI C63.10-2020, Clause 11.12 FCC Part 15.247(d) FCC Part 15.205/15.209 RSS-247 Clause 6.6 RSS-GEN Clause 8.9 Pass Duty Cycle ANSI C63.10-2020, Clause 11.6 None; for reporting purposes only. Pass Note: 1. This report is also performed according to ANSI C63.10-2020 + Cor.1-2023 + C63.10a-2024 + Errata to C63.10a-2024 standards. 2. N/A: In this whole report not applicable. *This test report is only published to and used by the applicant, and it is not for evidence purpose in China. *The measurement result for the sample received is <Pass> according to <CFR 47 FCC PART 15 SUBPART C, RSS-247 Issue 4> when <Accuracy Method> decision rule is applied. REPORT NO.: E04A26051247F00501 Page 4 of 45 TRF No.: 04-E001-0B Global Testing , Great Quality. CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................... 5 2. TEST METHODOLOGY ......................................................................................................... 6 3. FACILITIES AND ACCREDITATION ..................................................................................... 6 4. CALIBRATION AND UNCERTAINTY ................................................................................... 7 4.1. MEASURING INSTRUMENT CALIBRATION ........................................................... 7 4.2. MEASUREMENT UNCERTAINTY ............................................................................ 7 5. EQUIPMENT UNDER TEST .................................................................................................. 8 5.1. DESCRIPTION OF EUT ........................................................................................... 8 5.2. CHANNEL LIST ........................................................................................................ 8 5.3. MAXIMUM CONDUCTED OUTPUT POWER ........................................................... 8 5.4. TEST CHANNEL CONFIGURATION ........................................................................ 9 5.5. THE WORSE CASE POWER SETTING PARAMETER ............................................ 9 5.6. DESCRIPTION OF AVAILABLE ANTENNAS ........................................................... 9 5.7. EUT ACCESSORY ................................................................................................. 10 5.8. SUPPORT UNITS FOR SYSTEM TEST ................................................................. 10 5.9. SETUP DIAGRAM .................................................................................................. 10 6. MEASURING EQUIPMENT AND SOFTWARE USED......................................................... 11 7. ANTENNA PORT TEST RESULTS ..................................................................................... 13 7.1. Conducted Output Power ........................................................................................ 13 7.2. 6dB Bandwidth and 99% Occupied Bandwidth ....................................................... 14 7.3. Power Spectral Density ........................................................................................... 16 7.4. Conducted Band edge and spurious emission ........................................................ 17 7.5. Duty Cycle .............................................................................................................. 19 8. RADIATED TEST RESULTS ............................................................................................... 20 8.1. Radiated Band edge and Spurious Emission .......................................................... 27 9. ANTENNA REQUIREMENT ................................................................................................ 40 10. AC POWER LINE CONDUCTED EMISSION ......................................................... 42 11. TEST DATA - APPENDIX A ................................................................................... 45 REPORT NO.: E04A26051247F00501 Page 5 of 45…

Text truncated - open the document above for the full version.

AntennaSpecification Manufacture：TUYA ProductName：T1-U-HLAntenna AntennaType：PCB TestDate：2023.11.28 Testedby：ZhangYinhua Approvedby：Licco Content 1.GeneralDescription.................................................................................1 2.TestConfigurations...................................................................................2 2.1TestEnvironment............................................................................2 2.2TestEquipment...............................................................................2 2.3TestPrinciple...................................................................................2 3.TestResults..............................................................................................3 3.1GainandEfficiency..........................................................................3 3.2RadiationPattern............................................................................4 4.AntennaDimensions................................................................................6 5.EUTPhoto................................................................................................6 6.TestSetupPhoto......................................................................................7 1 1.GeneralDescription ManufacturerHangzhouTuyaInformationTechnologyCo.,Ltd Address Room701,Building3,MoreCenter,No.87GuDunRoad, Hangzhou,Zhejiang,China TestLocation Room106,Building3,LetongSciencePark,No.500, QiuyiRoad,BinjiangDistrict,Hangzhou ProductNameT1-U-HLAntenna Productmodel T1-U-HL AntennaType PCBAntenna TestItems Gain;Efficiency;RadiationPattern TestFrequency 2400-2500MHz TestStandard ANSI/IEEEStd149-1979 2 2.TestConfigurations 2.1TestEnvironment Temperature(°C)25 Humidity(%RH)60 AtmosphericPressure(kPa)100.5 2.2TestEquipment TestSystemTEM24Multi-probeMicrowaveChamber TestInstrumentAgilentE5071B 2.3TestPrinciple 3 3.TestResults 3.1GainandEfficiency Frequency(MHz)PeakGain(dBi)Efficiency(%) 2400 -1.21 22.39 2410 -1.01 23.07 2420 -0.55 23.71 2430 -0.39 24.43 2440 -0.28 25.12 2450 -0.26 25.64 2460 -0.32 25.41 2470 -0.23 25.59 2480 -0.53 25.06 2490 -0.48 24.95 2500 -0.96 23.50 4 3.2RadiationPattern Phi02D Phi902D Theta902D 5 2400MHz3D 2450MHz3D 2500MHz3D 6 4.AntennaDimensions Unit:mm 5.EUTPhoto 7 6.TestSetupPhoto

Setup Photographs Radiated Band edge and Spurious Emission AC Power Line Conducted Emission