2BH3E-CP1-AWireless Carplay

Us er Manual Wireless Carplay & Android Auto Adapte r Please read the manual carefully before use. Recommend keeping this manual for future reference. Compati bility Note Please make su re yo ur ca r su pports wired Carplay or Android Auto funct ions. Required iPhone 6 or later iPhone models with IOS 10 or above for wireless Carplay funct ion. Required an Android sm artphone that su pport latest Android Auto funct ion and with Android 11 or higher for wireless Android Auto funct ion. How to confirm if your car has Apple wired CarPlay or Android Auto function. Method 1: Connect yo ur iPhone or Android sm artphone to yo ur ca r by USB date ca ble and se e co nnect ion interface logo on yo ur ca r disp lay. Method 2: Check the co mpatible list below or ch eck with yo ur ca r manufact urer to se e if yo ur ca r has this ca pability. Check out the websi te for su pported ca r models https://www.apple.com/ios/carplay/available- models/ https.//www.android.com/auto/Compatibility# Compatibility-vehicles How to use 1. Start the car and wait for the car head until system to be loaded. 2. Connect the Wireless Carplay & Android auto adapter to the USB-A or USB-C port in your car. Please be sure plug the adapter into the port that is for wired apple Carplay or android auto. 3. After the device is successfully linked to the vehicle, there will be a Bluetooth prompt screen, and the Bluetooth name will be prompted as: smartBox-****. 4. Tu rn on the Bluetooth of your mobile phone, search and pai r the Bluetooth ‘smartBox-****’, and continue to agree to use it, then you can use the Carplay or android auto function normally. 5. Some models linked to Android Auto will not display the Bluetooth prompt interface. But it doesn't matter, you can directly search for Bluetooth ‘smartBox-****’ on your mobile phone, pair it and use Android auto normally. You are ready to enjoy wireless Carplay or wireless Android Auto now. Please note that you should keep your phone Bluetooth turned on, so that you can automatically link Carplay or android auto next time. Carplay Connection And roid Auto Connection Please note 1. The wireless Carplay & Android Auto adapter worki ng princi ple is: use s Bluetooth to est ablish a pairing between the iPhone or Android sm artphone and the ve hicl e, then sw itch es to usi ng Wi-Fi to maintain the wireless co nnect ion. 2. Please ensu re wireless Carplay & Android auto Adapter power indica tes blue light is on. 3. Please ensu re that yo ur ca r models su pport wired Carplay or Android auto funct ions. FQA 1. What is the Wi-Fi passw ord for the Wireless Carpl ay & Android Auto Adapter? We need to co nnect the Bluetooth, not Wi-Fi. After Bluetooth match ing is su cce ssf ul, Wi-Fi will automatica lly co nnect . So no need Wi-Fi passw ord. Make su re yo ur Wi-Fi is turned on and unoccu pied when pairing. 2. After pairing Android Auto adapter, ca n’t st art Android Auto funct ion or co mpatible, ca n’t reco gnize the USB... 1) lf yo ur ca r has use the android auto funct ion for the first time, please use yo ur date ca ble to co nnect yo ur phone to act iva te android auto through a wired method. 2) Please make su re that android auto on yo ur android phone is the last ve rsi on. lf not, please update to the latest ve rsi on. 3) Please turn off the Bluetooth of yo ur phone and enter the mobile applica tion management to se arch auto to cl ear the auto ca ch e. After the cl eaning is co mpleted, rest art the adapter and reco n nect to Bluetooth. 3. Audio input or output issu es: ca lls reject ed or forwarded to vo ice mail / no play so und / micr ophone not worki ng /musi c playb ack interrupted or pause d /vo ice funct ioning abnormally. 1) Please ch eck if the iPhone or Android sm artphone's Bluetooth co nnect to other devi ce s su ch as Earphone, watch , etc. lf so , please disco nnect other auto-co nnect ed Bluetooth devi ce s, and android sm artphone also need to co nnect to the ve hicl e Bluetooth for android aut o. 2) When on a ca ll, ch eck that yo ur ‘Audio’ output option is Carplay or Android Auto. 4. When use the wireless Carplay & Android Auto Adapter whether Mobile Phone ca n use other internet Wi-Fi? When enjoyi ng the wireless Carplay or Android Auto adapter funct ion, the phone's Wi-Fi will be occu pied by the adapter, so yo u ca n’t use other internet at the sa me time, yo u only ca n use yo ur phone SIM ca rd internet. 5. Unable to automatica lly reco nnect 1) Please make su re that the Bluetooth and Wi-Fi funct ions of yo ur mobile phone are turned on and the Bluetooth is not occ upied when yo u get in the ca r. 2) Clear the pairing reco rd, rest art the phone and repair the Adapter. 6. Can the adapter be paired with multiple phones? The adapter ca n be paired with maxi mum five phones, but only one devi ce ca n be co nnect ed at a time. If yo u would like to pair it with a new phone, please ca nce l the cu rrent co nnect ion first . Please note, by Bluetooth funct ion default, the adapter's syst em will only auto-co nnect back to the last use d phone. 7. Can't find the Bluetooth and Wi-Fi of the wireless Carplay & Android Auto Adapter? Please make su re wireless Carplay & Android auto adapter power indica tes blue light is on and be su re plug the adapter into the port that is for wired Carplay or Android auto. lf co nve nient, please test it with another phone. lf only a sp eci fic phone ca nnot find the Bluetooth or Wi-Fi of the adapter, please try to rese t the network and Bluetooth se ttings of this phone, and then rest art the phone once . If the sa me problem happens on the other phone, it may be defect ive , please let us kn ow. 8. Th e indicator light of the adapter is still on after the car is turned off. The ca r does not cu t off all power immediately when the engine is turned off. The adapter's light will not go out immediately; it will turn off after a few minutes. Please rest assu red that its power co nsu mption is minimal and will not drain the ca r bat…

Text truncated - open the document above for the full version.

Shenzhen Pinwei Technology Co.,Ltd 3rd Floor, Building 2, Longfeng Industrial Park, No.3 Tianxi Road, Fucheng Street, Longhua District Shenzhen City, Guangdong Province, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-10-10 To whom it may concern: We, Shenzhen Pinwei Technology Co.,Ltd, hereby certify that the equipment for which authorization is sought (FCC ID: 2BH3E-CP1-A) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature GUI QIANG LI Manager Shenzhen Pinwei Technology Co.,Ltd 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V03

Shenzhen Pinwei Technology Co.,Ltd Add: 3rd Floor, Building 2, Longfeng Industrial Park, No.3 Tianxi Road, Fucheng Street, Longhua District Shenzhen City, Guangdong Province, China Date: 2024-10-10 FCC ID: 2BH3E-CP1-A Dear Sir/Madam, We, Shenzhen Pinwei Technology Co.,Ltd Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: Wireless Carplay Model no.: CP1-A, CP1-B, CP1-C, CP1-D, CP1-E Sincerely, Name/Title： GUI QIANG LI/Manager Company: Shenzhen Pinwei Technology Co.,Ltd Address: 3rd Floor, Building 2, Longfeng Industrial Park, No.3 Tianxi Road, Fucheng Street, Longhua District Shenzhen City, Guangdong Province, China Phone: 13760443098 Fax: N/A E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-10-10> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2BH3E-CP1-A CP1-A For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： GUI QIANG LI/Manager Company: Shenzhen Pinwei Technology Co.,Ltd Address: 3rd Floor, Building 2, Longfeng Industrial Park, No.3 Tianxi Road, Fucheng Street, Longhua District Shenzhen City, Guangdong Province, China Phone: 13760443098 Fax: N/A E-Mail: [email protected]

Shenzhen Pinwei Technology Co.,Ltd 3rd Floor, Building 2, Longfeng Industrial Park, No.3 Tianxi Road, Fucheng Street, Longhua District Shenzhen City, Guangdong Province, China Date: 2024-10-10 FCC ID: 2BH3E-CP1-A Model Number: CP1-A To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Shenzhen Pinwei Technology Co.,Ltd, declare that this EUT (FCC ID: 2BH3E-CP1-A) doesn’t have Ad Hoc mode function on “non-US/Canada frequencies”. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title： GUI QIANG LI/Manager Company: Shenzhen Pinwei Technology Co.,Ltd Address: 3rd Floor, Building 2, Longfeng Industrial Park, No.3 Tianxi Road, Fucheng Street, Longhua District Shenzhen City, Guangdong Province, China Phone: 13760443098 Fax: N/A E-Mail: [email protected]

Shenzhen Pinwei Technology Co.,Ltd 3rd Floor, Building 2, Longfeng Industrial Park, No.3 Tianxi Road, Fucheng Street, Longhua District Shenzhen City, Guangdong Province, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-10-10 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2BH3E-CP1-A including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： GUI QIANG LI/Manager Company: Shenzhen Pinwei Technology Co.,Ltd Address: 3rd Floor, Building 2, Longfeng Industrial Park, No.3 Tianxi Road, Fucheng Street, Longhua District Shenzhen City, Guangdong Province, China Phone: 13760443098 Fax: N/A E-Mail: [email protected]

FCC ID: 2BH3E-CP1-A External Photos of the EUT FCC ID: 2BH3E-CP1-A

Label and Location Size: L: 2.0cm*W: 1.0cm Label and Location FCC ID : 2BH3E-CP1-A

FCC ID: 2BH3E-CP1-A Internal Photos of the EUT FCC ID: 2BH3E-CP1-A FCC ID: 2BH3E-CP1-A ANT

RF Exposure evaluation FCC ID: 2BH3E-CP1-A Exposure category: General population/uncontrolled environment EUT Type: Production Unit Device Type: Mobile Device 1. Reference According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. KDB447498 D01: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 2. Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density 3. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 4. Antenna Information CP1-A can only use antennas certificated as follows provided by manufacturer; Antenna No. Model No. of antenna: Type of antenna: Gain of the antenna (Max.) Frequency range: BT/2.4GWIFI / PCB antenna 0.92dBi for 2400-2500MHz 5. Manufacturing Tolerance Mode Max. Peak Conducted Output Power (dBm) Max. tune-up BT 3.1 3.0±1 BLE 0.11 1.0±1 2.4GWIFI 14.11 14.0±1 6. Standalone MPE Result As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum EUT RF output power, the minimum separation distance, r =20cm, as well as the gain of the used antenna is 0.92dBi, the RF power density can be obtained. Modulation Type Output power Antenna Gain (dBi) Antenna Gain (linear) MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBm mW BT 4.0 2.5119 0.92 1.2359 0.0006 1.0000 BLE 2.0 1.5849 0.92 1.2359 0.0004 1.0000 2.4GWIFI 15.0 31.6228 0.92 1.2359 0.0078 1.0000 Remark: 1. Output power (Peak) including turn-up tolerance; 2. MPE evaluate distance is 20cm from user manual provide by manufacturer. 7. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. ----------------THE END OF REPORT---------------

1. Antenna Description: Antenna type PCB Antenna Model CP1-A Frequency range 2400-2500MHz Manufacturer Shenzhen Hongshi industrial Co.,Ltd ANT Peak Gain 0.92 dBi 2. Antenna Photo: Length :6.93mm Width:3.69mm 3. Test Equipment & Conditions 3.1 Test instrument VSWR is tested using Agilent E5071B connected to a hand mechanism, and the status is free space. 3.2 Test environment and methods 4．Antenna Radiation Pattern 2400MHz 2450MHz 2500MHz

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : FCC ID. ............................................ : CTA24091800901 2BH3E-CP1-A Compiled by ( position+printed name+signature) .. : File administrators Jinghua Xiao Supervised by ( position+printed name+signature) .. : Project Engineer Xudong Zhang Approved by ( position+printed name+signature) .. : RF Manager Eric Wang Date of issue ..................................... : Sep. 23, 2024 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : Shenzhen Pinwei Technology Co.,Ltd Address ............................................ : 3rd Floor, Building 2, Longfeng Industrial Park, No.3 Tianxi Road, Fucheng Street, Longhua District, Shenzhen City, Guangdong Province, China Test specification ...........................: Standard ........................................... : FCC Part 15.247 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Equipment description...................: Wireless Carplay Trade Mark ....................................... : N/A Manufacturer .................................... : Shenzhen Hongshi industrial Co.,Ltd Model/Type reference....................... : CP1-A Listed Models .................................. : CP1-B, CP1-C, CP1-D, CP1-E Modulation ....................................... : GFSK Frequency .......................................... From 2402MHz to 2480MHz Ratings ............................................. : DC 5.0V From external circuit Result................................................ : PASS Report No.: CTA24091800901 Page 2 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Wireless Carplay Model /Type : CP1-A Listed Models : CP1-B, CP1-C, CP1-D, CP1-E Applicant : Shenzhen Pinwei Technology Co.,Ltd Address : 3rd Floor, Building 2, Longfeng Industrial Park, No.3 Tianxi Road, Fucheng Street, Longhua District, Shenzhen City, Guangdong Province, China Manufacturer : Shenzhen Hongshi industrial Co.,Ltd Address : 3rd Floor, Building 2, Longfeng Industrial Park, No.3 Tianxi Road, Fucheng Street, Longhua District, Shenzhen City, Guangdong Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA24091800901 Page 3 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S ................................................................. 4 2 S U M M A R Y ............................................................................ 5 2.1 General Remarks 5 2.2 Product Description* 5 2.3 Equipment Under Test 5 2.4 Short description of the Equipment under Test (EUT) 5 2.5 EUT operation mode 6 2.6 Block Diagram of Test Setup 6 2.7 Related Submittal(s) / Grant (s) 6 2.8 Modifications 6 3 T E S T E N V I R O N M E N T .............................................................. 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Summary of measurement results 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 T E ST C O N D I T I O N S A N D R E S U L T S ........................................... 11 4.1 AC Power Conducted Emission 11 4.2 Radiated Emissions and Band Edge 14 4.3 Maximum Peak Output Power 21 4.4 Power Spectral Density 22 4.5 6dB Bandwidth 24 4.6 Out-of-band Emissions 26 4.7 Antenna Requirement 30 5 T E S T S E T U P P H O T O S O F T H E E U T ......................................... 31 6 P H O T O S O F T H E E U T ........................................................... 33 Report No.: CTA24091800901 Page 4 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 V05r02: Guidance for Performing Compliance Measurements on Digital Transmission Systems (DTS) Operating Under §15.247 Report No.: CTA24091800901 Page 5 of 37 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park,…

Text truncated - open the document above for the full version.

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. .................... : FCC ID. ........................................... : CTA24091800903 2BH3E-CP1-A Compiled by ( position+printed name+signature) . : File administrators Jinghua Xiao Supervised by ( position+printed name+signature) . : Project Engineer Xudong Zhang Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Sep. 23, 2024 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ........................................... : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ........................... : Shenzhen Pinwei Technology Co.,Ltd Address ............................................ : 3rd Floor, Building 2, Longfeng Industrial Park, No.3 Tianxi Road, Fucheng Street, Longhua District, Shenzhen City, Guangdong Province, China Test specification ........................... : Standard ........................................... : FCC Part 15.247 TRF Originator ................................. : Shenzhen CTA Testing Technology Co., Ltd. Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Wireless Carplay Trade Mark ....................................... : N/A Manufacturer .................................... : Shenzhen Hongshi industrial Co.,Ltd Model/Type reference ...................... : CP1-A Listed Models .................................. : CP1-B, CP1-C, CP1-D, CP1-E Modulation Type ............................... : CCK/DSSS/OFDM Operation Frequency ....................... : From 2412 - 2462MHz Rating ............................................... : DC 5.0V From external circuit Result ............................................... : PASS Report No.: CTA24091800903 Page 2 of 38 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Wireless Carplay Model /Type : CP1-A Listed Models CP1-B, CP1-C, CP1-D, CP1-E Applicant : Shenzhen Pinwei Technology Co.,Ltd Address : 3rd Floor, Building 2, Longfeng Industrial Park, No.3 Tianxi Road, Fucheng Street, Longhua District, Shenzhen City, Guangdong Province, China Manufacturer : Shenzhen Hongshi industrial Co.,Ltd Address : 3rd Floor, Building 2, Longfeng Industrial Park, No.3 Tianxi Road, Fucheng Street, Longhua District, Shenzhen City, Guangdong Province, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA24091800903 Page 3 of 38 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S ................................................................. 4 2 S U M M A R Y ............................................................................ 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Equipment Under Test 6 2.4 Short description of the Equipment under Test (EUT) 6 2.5 EUT operation mode 6 2.6 Block Diagram of Test Setup 6 2.7 Related Submittal(s) / Grant (s) 6 2.8 Modifications 6 3 T E S T E N V I R O N M E N T .............................................................. 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Test Description 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 T E S T C O N D I T I O N S A N D R E S U L T S ........................................... 11 4.1 AC Power Conducted Emission 11 4.2 Radiated Emission 14 4.3 Maximum Peak Conducted Output Power 20 4.4 Power Spectral Density 21 4.5 6dB Bandwidth 24 4.6 Out-of-band Emissions 27 4.7 Antenna Requirement 36 5 T E S T S E T U P P H O T O S O F T H E E U T ......................................... 37 6 P H O T O S O F T H E E U T ........................................................... 38 Report No.: CTA24091800903 Page 4 of 38 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 v05r02: Guidance for Compliance Measurements on Digital Transmission Systems (DTS) ,Frequency Hopping Spread Spectrum System(HFSS), and Hybrid System Devices Operating Under §15.247 …

Text truncated - open the document above for the full version.

Report No.: CTA24091800903 Page 29 of 38 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11b 802.11g Reference Reference CH011 CH01 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24091800903 Page 30 of 38 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11g Reference Reference CH06 CH11 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24091800903 Page 31 of 38 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n20 Reference Reference CH01 CH06 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24091800903 Page 32 of 38 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n20 802.11n40 Reference Reference CH11 CH03 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24091800903 Page 33 of 38 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 802.11n40 Reference Reference CH06 CH09 30MHz-1GHz 30MHz-1GHz 1GHz -25GHz 1GHz -25GHz Report No.: CTA24091800903 Page 34 of 38 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Band-edge Measurements for RF Conducted Emissions: 802.11b Left bandedge Right bandedge 802.11g Left bandedge Right bandedge Report No.: CTA24091800903 Page 35 of 38 Shenzhen CTA Testing Technology C…

Text truncated - open the document above for the full version.