2BH6H-DP-03Digital Piano

China Joy Keyboards Co.,Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: October 08, 2024 FCC ID:2BH6H-DP-03 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing China Joy Keyboards Co.,Ltd certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing China Joy Keyboards Co.,Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: China Joy Keyboards Co.,Ltd Address: 19 FLOOR, BIAOLI BUILDING.NO.99 HUDONGROAD, FUZHOU. FUJIAN.P.R. China Contact Person: ouwen Deng Tel.: +86-13536722964 Email: [email protected] Sincerely, Signature:

China Joy Keyboards Co.,Ltd U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: October 08, 2024 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID:2BH6H-DP-03 China Joy Keyboards Co.,Ltd(“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant China Joy Keyboards Co.,Ltd FRN: 0035783059 Address: 19 FLOOR, BIAOLI BUILDING.NO.99 HUDONGROAD, FUZHOU. FUJIAN.P.R. China Signature: Contact Person: ouwen Deng Tel: +86-13536722964 Email: [email protected]

China Joy Keyboards Co.,Ltd Date: October 08, 2024 Product Model Number: DP-03 FCC ID:2BH6H-DP-03 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: ouwen Deng Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: +86-13536722964 On behalf of: China Joy Keyboards Co.,Ltd

China Joy Keyboards Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: October 8, 2024 Subject; Request for Confidentiality FCC ID:2BH6H-DP-03 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: ouwen Deng Title: Manager

Page 1 of 3 1. General Information 1.1 Product Information Manufacturer: China Joy Keyboards Co.,Ltd Address of Manufacturer: 19 FLOOR, BIAOLI BUILDING.NO.99 HUDONGROAD, FUZHOU. FUJIAN.P.R. China Product Name: PCB Antenna Model Name: DP-03 Frequency Range: 2400MHz - 2483.5MHz Type of Antenna: PCB Antenna Antenna Gain: 0dBi (Max.) Impedance: 50 ohm Antenna View: Length * Width (1.2cm * 0.3cm) Page 2 of 3 2. OTA Test 2.1 Gain Frequency Peak Gain (dBi) Polarity 2402MHz 0 Horizontal 2402MHz -0.88 Vertical 2442MHz -1.56 Horizontal 2442MHz -1.87 Vertical 2480MHz -2 Horizontal 2480MHz -2.12 Vertical Page 3 of 3 2.2 Radiation Pattern View

Report No: SSP24070097-1E FCC ID:2BH6H-DP-03 Annex of Test Report Annex A. EUT External Photos EUT View 1 EUT View 2 Report No: SSP24070097-1E FCC ID:2BH6H-DP-03 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP24070097-1E FCC ID:2BH6H-DP-03 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP24070097-1E FCC ID:2BH6H-DP-03 Annex of Test Report EUT View 7 EUT View 8 Report No: SSP24070097-1E FCC ID:2BH6H-DP-03 Annex of Test Report EUT View 9

Report No: SSP24070097-1E FCC ID:2BH6H-DP-03 Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

FCC ID:2BH6H-DP-03 RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For BR+EDR Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit -3.36 -3(±1) -2 0.631 2402 5 0.1955 3.0 So a SAR test is not required

CCUT Testing & Certification Report No: SSP24070097-1E FCC Test Report Page 1 of 46 FCC TEST REPORT FCC ID:2BH6H-DP-03 Report No. : SSP24070097-1E Applicant : China Joy Keyboards Co.,Ltd Product Name : Digital Piano Model Name : DP-03 Test Standard : FCC Part 15.247 Date of Issue : 2024-08-06 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. CCUT Testing & Certification Report No: SSP24070097-1E FCC Test Report Page 2 of 46 Test Report Basic Information Applicant..................................: China Joy Keyboards Co.,Ltd Address of Applicant...............: 19 FLOOR, BIAOLI BUILDING.NO.99 HUDONGROAD, FUZHOU. FUJIAN.P.R. China Manufacturer..........................: China Joy Keyboards Co.,Ltd Address of Manufacturer........: 19 FLOOR, BIAOLI BUILDING.NO.99 HUDONGROAD, FUZHOU. FUJIAN.P.R. China Product Name.........................: Digital Piano Brand Name.............................: JOY Main Model..............................: DP-03 Series Models..........................: - Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2013 Date of Test .............................: 2024-07-08 to 2024-07-20 Test Result...............................: PASS Tested By ................................: (Coke Huang) Reviewed By............................: (Lieber Ouyang) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. CCUT Testing & Certification Report No: SSP24070097-1E FCC Test Report Page 3 of 46 CONTENTS 1. General Information ...................................................................................................................................................... 5 1.1 Product Information ............................................................................................................................................... 5 1.2 Test Setup Information ........................................................................................................................................... 6 1.3 Compliance Standards ............................................................................................................................................. 7 1.4 Test Facilities .......................................................................................................................................................... 7 1.5 List of Measurement Instruments ............................................................................................................................ 8 1.6 Measurement Uncertainty ....................................................................................................................................... 8 2. Summary of Test Results ............................................................................................................................................... 9 3. Antenna Requirement ................................................................................................................................................. 10 3.1 Standard and Limit................................................................................................................................................ 10 3.2 Test Result ............................................................................................................................................................ 10 4. Conducted Emissions................................................................................................................................................... 11 4.1 Standard and Limit................................................................................................................................................ 11 4.2 Test Procedure ...................................................................................................................................................... 11 4.3 Test Data and Results ............................................................................................................................................ 12 5. Radiated Emissions ..................................................................................................................................................... 15 5.1 Standard and Limit................................................................................................................................................ 15 5.2 Test Procedure ...................................................................................................................................................... 15 5.3 Test Data and Results ............................................................................................................................................ 17 6. Band-edge Emissions(Radiated)................................................................................................................................. 21 6.1 Standard and Limit................................................................................................................................................ 21 6.2 Test Procedure ...................................................................................................................................................... 21 6.3 Test Data and Results ..................................................................................................................................…

Text truncated - open the document above for the full version.