FCCID.CO- FCC ID Database
HomeCompaniesEquipment ClassesSearch

© 2026 FCC ID Database. All rights reserved.

AboutContactData sourced from FCC public records
  1. Home/
  2. TP-Link Systems Inc./
  3. 2BH7FEAP773V2

2BH7FEAP773V2BE11000 Ceiling Mount Wi-Fi 7 Access Point

TP-Link Systems Inc.
BE11000 Ceiling Mount Wi-Fi 7 Access Point - FCC ID 2BH7FEAP773V2 - TP-Link Systems Inc.
Click to zoom

Application Details

Equipment Class
DTS - Digital Transmission System
Date of Grant
Apr 28, 2026
Application Purpose
Original Equipment
Equipment Note
BE11000 Ceiling Mount Wi-Fi 7 Access Point
Frequency Range
2402.00000000 - 2480.00000000
Company
TP-Link Systems Inc.
Country
United States

Documents & Files

Select a file to view

Users Manual

↗
↗

Attestation Statements

↗
↗
↗

Cover Letter(s)

↗
↗
↗
↗
↗

External Photos

↗

ID Label/Location Info

↗
↗

Internal Photos

↗

RF Exposure Info

↗

Test Report

↗
↗
↗
↗
↗
↗
↗

Test Setup Photos

↗

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

Regulatory Compliance EAP773 © 2026 TP-Link 1900002074 REV2.0.0 FCC Compliance Information Statement Product Name: BE9300/BE11000 Ceiling Mount Wi-Fi 7 Access Point Model Number: EAP773 Responsible party: TP-Link Systems Inc. Address: 10 Mauchly, Irvine, CA 92618 Website: https://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: [email protected] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set fo rth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 28cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter.” •FCC regulations restrict the operation of this device to indoor use only. •The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet in the 5.925-6.425 GHz band. •Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. We, TP-Link Systems Inc., has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2026-01-22 CE Mark Warning OPERATING FREQUENCY (the maximum transmitted power) 2402 MHz - 2480 MHz (10dBm) 2412 MHz - 2472 MHz (20dBm) 5150 MHz - 5250 MHz (23dBm) 5250 MHz - 5350 MHz (23dBm) 5470 MHz - 5725 MHz (30dBm) 6105MHz - 6425 MHz (23dBm) EU Declaration of Conformity TP-Link hereby declares that the access point is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/8 63. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/. RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 28cm from your body. National Restrictions Frequency band: 5150 - 5250 MHz: Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, equipment shall not be attached to a fixed installation or to the external body of road vehicles, a fixed infrastructure or a fixed outdoor antenna. Use by unmanned aircraft systems (UAS) is limited to within the 5170 - 5250 MHz band. Frequency band: 5250 - 5350 MHz: Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted. Frequency band: 5470 - 5725 MHz: Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted. Frequency band 5945 -6425MHz: Restricted to indoor use, including in trains with metal-coated windows and aircraft. Outdoor use, incl uding in road vehicles, is not permitted. UKCA Mark UK Declaration of Conformity TP-Link hereby declares that the access point is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca National Restrictions Attention: This device may only be used indoors in Great Britain. UK Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exemp…

Text truncated - open the document above for the full version.

Users Manual

Or Quick Installation Guide Ceiling Mount Access Point Note: EAP727 is used as an example throughout the guide. Images may differ from your actual product. ©2025 TP-Link 7100002183 REV1.0.0 Scan for EAP Start Guide Installation Option 1 Ceiling Mounting (on a Tile) 1 2 3 4 5 Package Contents 1× Φ 25 mm (63/64 in) 4× Φ 4 mm (5/32 in) 1 2 A Option 2 Ceiling Mounting (on a T-bar) 1 2 3 4 5 6 A 1-pack product contains the following contents, while a 5-pack provides five sets of accessories and one installation guide. Note: Accessories may vary by region and model. 2 1 60 mm 83 mm Option 3 Wall Mounting Option 4 Junction Box Mounting Option 1 1×4×4×4× Option 2 1× 2×2×4× 2 1 1×1× Quick Installation Guide 1× 4×4×4× 4×4×2×2×2× OR 2×2×4× 1× (Only for some models) 1× Note: The AP will be locked after installed. To uninstall, see the Appendix on the back page. 2 1 For details on the warranty period, policy, and procedures, visit https://support.omadanetworks.com/warranty-services/. Warranty Support For technical support, user guides, and other information, please visit https://support.omadanetworks.com/, or simply scan the QR code. More Resources Main Sitehttps://www.omadanetworks.com/ https://support.omadanetworks.com/video/ https://support.omadanetworks.com/document/ https://support.omadanetworks.com/product/ https://support.omadanetworks.com/contact-support/ Video Center Product Support Documents Technical Support 1 2 3 4 5 4× Φ 7.6 mm (19/64 in) 2 1 A 1 2 Option 3 1× 4×4× Power On Option 1: Via PoE Switch Option 2: Via Power Adapter Power Port Power Adapter PoE SwitchETH PoE Port More Configurations For more configurations, refer to the User Guides of the Omada Controller and Omada Access Points at: https://support.omadanetworks.com/document/ Omada App With the TP-Link Omada app, you can access and manage your Omada devices at a local site or remotely with a tap of your phone. Scan for Omada App Switch Gateway/Router On-Premises Controller Omada Central (Cloud-Based) Or EAPEAPEAP Configure and manage EAPs (and other Omada devices) centrally with an Omada Controller. Option 2: Controller Mode Scan for Controller Start Guide Configuration Switch Gateway/Router EAPEAPEAP Configure and manage each EAP on its standalone page. Option 1: Standalone Mode Scan for Standalone Start Guide 1 2 3 Choose the accessory screws that fit your junction box. Compatible wall junctions are as follows: For simplicity, an 86 mm wall junction box is used as an example. Option 4 1× 2×2×2× OROR 1 2 3 Uninstalling the AP Appendix 1× Safety Information • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. • Do not use the device where wireless devices are not allowed. • (For IN version) The EAP can be powered only by a power adapter or a PSE device (such as a PoE switch) which complies with Limited Power Source (LPS) of IEC 60950-1. (For other versions) The EAP can be powered only by a power adapter or a PSE device (such as a PoE switch) which complies with Power Source Class 2 (PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1. • Use only power supplies listed in the user instructions. Refer to the User Manual on the product support page. For models with adapters: • Do not use damaged charger or USB cable to charge the device. • Do not use any other chargers than those recommended. • Adapter shall be installed near the equipment and shall be easily accessible. TP-Link hereby declares that the Access Point is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU, and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/ TP-Link hereby declares that the Access Point is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/ Cable through wallCable along wall Or 1 2

Internal Photos

Report No.: R25S1036128-UE 5 of 16 Internal Photograph (1) EUT Photo (2) EUT Photo Report No.: R25S1036128-UE 6 of 16 (3) EUT Photo (4) EUT Photo Report No.: R25S1036128-UE 7 of 16 (5) EUT Photo (6) EUT Photo Report No.: R25S1036128-UE 8 of 16 (7) EUT Photo (8) EUT Photo Report No.: R25S1036128-UE 9 of 16 (9) EUT Photo (10) EUT Photo Report No.: R25S1036128-UE 10 of 16 (11) EUT Photo (12) EUT Photo Report No.: R25S1036128-UE 11 of 16 (13) EUT Photo (14) EUT Photo Report No.: R25S1036128-UE 12 of 16 (15) EUT Photo (16) EUT Photo Report No.: R25S1036128-UE 13 of 16 (17) EUT Photo (18) EUT Photo Report No.: R25S1036128-UE 14 of 16 (19) EUT Photo (20) EUT Photo Report No.: R25S1036128-UE 15 of 16 (21) EUT Photo (22) EUT Photo Report No.: R25S1036128-UE 16 of 16 (23) EUT Photo

Test Setup Photos

Report No.: R25S1036128-UT 1 of 8 RF Test Setup Photograph Description: BLE Radiated Spurious Emissions Test Setup for 9 kHz ~ 30 MHz (WJ-AC1) Description: BLE Radiated Spurious Emissions Test Setup for 30 MHz ~ 1 GHz (WJ-AC1) Report No.: R25S1036128-UT 2 of 8 Description: BLE Radiated Spurious Emissions Test Setup for 1 GHz ~ 18 GHz (WJ-AC1) Description: 2.4G WIFI Radiated Spurious Emissions Test Setup for 9 kHz ~ 30 MHz (WJ-AC1) Report No.: R25S1036128-UT 3 of 8 Description: 2.4G WIFI Radiated Spurious Emissions Test Setup for 30 MHz ~ 1 GHz (WJ-AC1) Description: 5G WIFI Radiated Spurious Emissions Test Setup for 9 kHz ~ 30 MHz (WJ-AC1) Report No.: R25S1036128-UT 4 of 8 Description: 5G WIFI Radiated Spurious Emissions Test Setup for 30 MHz ~ 1 GHz (WJ-AC1) Description: 6G WIFI Radiated Spurious Emissions Test Setup for 9 kHz ~ 30 MHz (WJ-AC1) Report No.: R25S1036128-UT 5 of 8 Description: 6G WIFI Radiated Spurious Emissions Test Setup for 30 MHz ~ 1 GHz (WJ-AC1) Description: 6G WIFI Radiated Spurious Emissions Test Setup for 1 GHz ~ 18 GHz (WJ-AC1) Report No.: R25S1036128-UT 6 of 8 Description: 6G WIFI Radiated Spurious Emissions Test Setup for 18 GHz ~ 40 GHz (WJ-AC2) Description: 2G Bandedge Test Setup (WJ-AC2) Report No.: R25S1036128-UT 7 of 8 Description: 5G Bandedge Test Setup (WJ-AC2) Description: Conducted Emissions Test Setup (WJ-SR5) Report No.: R25S1036128-UT 8 of 8 Description: Conducted Emissions Test Setup (WJ-SR5) Description: Dynamic Frequency Selection Test Setup (WJ-SR8)

Test Report

Report No.: R25S1036128-U202 79 of 219 802.11be-EHT40 Out-of-Band Emissions - Ant 2 Channel 03 (2422 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission Report No.: R25S1036128-U202 80 of 219 802.11be-EHT40 Out-of-Band Emissions - Ant 2 Channel 09 (2452 MHz) Reference Level High Band Edge Spurious Emission Report No.: R25S1036128-U202 81 of 219 A.6 Radiated Spurious Emissions Test Result Test Site SIP-AC3 Test Engineer Yuuki Qiu Test Date 2026-01-05 Test Mode 802.11b Remark: 1. Average measurement was not performed if peak level lower than average limit. 2. Other frequency was 20 dB below limit line within 1-18 GHz, there is not show in the report. Test Channel Frequency (MHz) Reading Level (dBμV) Factor (dB/m) Measure Level (dBμV/m) Limit (dBμV/m) Margin (dB) Detector Polarization 01 9647.90 53.09 -0.34 52.75 54.00 -1.25 Average Horizontal 9647.90 55.49 -0.34 55.15 68.20 -13.05 Peak Horizontal 12061.90 49.44 0.12 49.56 54.00 -4.44 Average Horizontal 12061.90 52.19 0.12 52.31 74.00 -21.69 Peak Horizontal 15937.90 32.54 8.67 41.21 54.00 -12.79 Average Horizontal 15937.90 44.55 8.67 53.22 74.00 -20.78 Peak Horizontal 17894.60 30.79 12.52 43.31 54.00 -10.69 Average Horizontal 17894.60 42.78 12.52 55.30 74.00 -18.70 Peak Horizontal 9647.90 54.00 -0.34 53.66 54.00 -0.34 Average Vertical 9647.90 56.40 -0.34 56.06 68.20 -12.14 Peak Vertical 12060.20 51.55 0.10 51.65 54.00 -2.35 Average Vertical 12060.20 54.30 0.10 54.40 74.00 -19.60 Peak Vertical 16111.30 32.65 8.44 41.09 54.00 -12.91 Average Vertical 16111.30 44.71 8.44 53.15 74.00 -20.85 Peak Vertical 17932.00 30.99 12.78 43.77 54.00 -10.23 Average Vertical 17932.00 42.98 12.78 55.76 74.00 -18.24 Peak Vertical 06 9748.20 52.95 0.01 52.96 54.00 -1.04 Average Horizontal 9748.20 54.32 0.01 54.33 68.20 -13.87 Peak Horizontal 12184.30 50.24 0.44 50.68 74.00 -23.32 Peak Horizontal 15919.20 33.04 8.26 41.30 54.00 -12.70 Average Horizontal 15919.20 45.02 8.26 53.28 74.00 -20.72 Peak Horizontal 17932.00 31.61 12.78 44.39 54.00 -9.61 Average Horizontal 17932.00 43.59 12.78 56.37 74.00 -17.63 Peak Horizontal 9748.20 50.13 0.01 50.14 68.20 -18.06 Peak Vertical 12182.60 49.21 0.45 49.66 74.00 -24.34 Peak Vertical 15944.70 32.40 8.69 41.09 54.00 -12.91 Average Vertical 15944.70 44.41 8.69 53.10 74.00 -20.90 Peak Vertical 17925.20 30.54 12.77 43.31 54.00 -10.69 Average Vertical Report No.: R25S1036128-U202 82 of 219 17925.20 42.54 12.77 55.31 74.00 -18.69 Peak Vertical 11 9848.50 52.91 0.40 53.31 54.00 -0.69 Average Horizontal 9848.50 54.67 0.40 55.07 68.20 -13.13 Peak Horizontal 12311.80 50.64 0.88 51.52 74.00 -22.48 Peak Horizontal 15948.10 33.51 8.44 41.95 54.00 -12.05 Average Horizontal 15948.10 45.53 8.44 53.97 74.00 -20.03 Peak Horizontal 17930.30 30.27 12.78 43.05 54.00 -10.95 Average Horizontal 17930.30 42.24 12.78 55.02 74.00 -18.98 Peak Horizontal 8153.60 53.05 -1.62 51.43 74.00 -22.57 Peak Vertical 15943.00 32.76 8.82 41.58 54.00 -12.42 Average Vertical 15943.00 44.76 8.82 53.58 74.00 -20.42 Peak Vertical 17930.30 30.86 12.78 43.64 54.00 -10.36 Average Vertical 17930.30 42.86 12.78 55.64 74.00 -18.36 Peak Vertical Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB/m) Factor (dB/m) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB) Report No.: R25S1036128-U202 83 of 219 Test Site SIP-AC3 Test Engineer Yuuki Qiu Test Date 2026-01-05 Test Mode 802.11g Remark: 1. Average measurement was not performed if peak level lower than average limit. 2. Other frequency was 20 dB below limit line within 1-18 GHz, there is not show in the report. Test Channel Frequency (MHz) Reading Level (dBμV) Factor (dB/m) Measure Level (dBμV/m) Limit (dBμV/m) Margin (dB) Detector Polarization 01 9646.20 53.34 -0.33 53.01 68.20 -15.19 Peak Horizontal 12067.00 52.29 0.18 52.47 54.00 -1.53 Average Horizontal 12067.00 60.43 0.18 60.61 74.00 -13.39 Peak Horizontal 15944.70 32.49 8.69 41.18 54.00 -12.82 Average Horizontal 15944.70 44.48 8.69 53.17 74.00 -20.83 Peak Horizontal 17937.10 31.23 12.44 43.67 54.00 -10.33 Average Horizontal 17937.10 43.23 12.44 55.67 74.00 -18.33 Peak Horizontal 9639.40 45.67 -0.30 45.37 54.00 -8.63 Average Vertical 9639.40 54.27 -0.30 53.97 68.20 -14.23 Peak Vertical 12046.60 50.44 0.01 50.45 54.00 -3.55 Average Vertical 12046.60 59.04 0.01 59.05 74.00 -14.95 Peak Vertical 15941.30 44.15 8.77 52.92 74.00 -21.08 Peak Vertical 17945.60 31.77 11.87 43.64 54.00 -10.36 Average Vertical 17945.60 43.71 11.87 55.58 74.00 -18.42 Peak Vertical 06 7310.40 50.15 -2.99 47.16 54.00 -6.84 Average Horizontal 7310.40 58.55 -2.99 55.56 74.00 -18.44 Peak Horizontal 9739.70 49.38 -0.02 49.36 54.00 -4.64 Average Horizontal 9739.70 57.78 -0.02 57.76 68.20 -10.44 Peak Horizontal 12175.80 50.10 0.49 50.59 54.00 -3.41 Average Horizontal 12175.80 58.50 0.49 58.99 74.00 -15.01 Peak Horizontal 17794.30 33.10 10.57 43.67 54.00 -10.33 Average Horizontal 17794.30 45.09 10.57 55.66 74.00 -18.34 Peak Horizontal 7310.40 46.29 -2.99 43.30 54.00 -10.70 Average Vertical 7310.40 54.70 -2.99 51.71 74.00 -22.29 Peak Vertical 9741.40 47.23 -0.02 47.21 54.00 -6.79 Average Vertical 9741.40 55.57 -0.02 55.55 68.20 -12.65 Peak Vertical 12180.90 48.94 0.46 49.40 54.00 -4.60 Average Vertical 12180.90 57.35 0.46 57.81 74.00 -16.19 Peak Vertical 17760.30 33.86 9.98 43.84 54.00 -10.16 Average Vertical Report No.: R25S1036128-U202 84 of 219 17760.30 45.84 9.98 55.82 74.00 -18.18 Peak Vertical 11 9851.90 46.71 0.41 47.12 54.00 -6.88 Average Horizontal 9851.90 54.99 0.41 55.40 68.20 -12.80 Peak Horizontal 12305.00 46.90 0.93 47.83 54.00 -6.17 Average Horizontal 12305.00 54.23 0.93 55.16 74.00 -18.84 Peak Horizontal 15926.00 33.24 8.32 41.56 54.00 -12.44 Average Horizontal 15926.00 45.26 8.32 53.58 74.00 -20.42 Peak Horizontal 17790.90 33.37 10.48 43.85 54.00 -10.15 Average Horizontal 17790.90 45.35 10.48 55.83 74.00 -18.17 Peak Horizontal 12308.40 44.17 0.90 45.07 54.00 -8.93 Average Vertical 12308.40 52.09 0.90 52.99 7…

Text truncated - open the document above for the full version.

Test Report

Report No.: R25S1036128-U202 62 of 219 802.11be-EHT20 Out-of-Band Emissions - Ant 1 Channel 11 (2462 MHz) Reference Level High Band Edge Spurious Emission Report No.: R25S1036128-U202 63 of 219 802.11be-EHT40 Out-of-Band Emissions - Ant 1 Channel 03 (2422 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission Report No.: R25S1036128-U202 64 of 219 802.11be-EHT40 Out-of-Band Emissions - Ant 1 Channel 09 (2452 MHz) Reference Level High Band Edge Spurious Emission Report No.: R25S1036128-U202 65 of 219 802.11b Out-of-Band Emissions - Ant 2 Channel 01 (2412 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission Report No.: R25S1036128-U202 66 of 219 802.11b Out-of-Band Emissions - Ant 2 Channel 11 (2462 MHz) Reference Level High Band Edge Spurious Emission Report No.: R25S1036128-U202 67 of 219 802.11g Out-of-Band Emissions - Ant 2 Channel 01 (2412 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission Report No.: R25S1036128-U202 68 of 219 802.11g Out-of-Band Emissions - Ant 2 Channel 11 (2462 MHz) Reference Level High Band Edge Spurious Emission Report No.: R25S1036128-U202 69 of 219 802.11n-HT20 Out-of-Band Emissions - Ant 2 Channel 01 (2412 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission Report No.: R25S1036128-U202 70 of 219 802.11n-HT20 Out-of-Band Emissions - Ant 2 Channel 11 (2462 MHz) Reference Level High Band Edge Spurious Emission Report No.: R25S1036128-U202 71 of 219 802.11n-HT40 Out-of-Band Emissions - Ant 2 Channel 03 (2422 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission Report No.: R25S1036128-U202 72 of 219 802.11n-HT40 Out-of-Band Emissions - Ant 2 Channel 09 (2452 MHz) Reference Level High Band Edge Spurious Emission Report No.: R25S1036128-U202 73 of 219 802.11ax-HE20 Out-of-Band Emissions - Ant 2 Channel 01 (2412 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission Report No.: R25S1036128-U202 74 of 219 802.11ax-HE20 Out-of-Band Emissions - Ant 2 Channel 11 (2462 MHz) Reference Level High Band Edge Spurious Emission Report No.: R25S1036128-U202 75 of 219 802.11ax-HE40 Out-of-Band Emissions - Ant 2 Channel 03 (2422 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission Report No.: R25S1036128-U202 76 of 219 802.11ax-HE40 Out-of-Band Emissions - Ant 2 Channel 09 (2452 MHz) Reference Level High Band Edge Spurious Emission Report No.: R25S1036128-U202 77 of 219 802.11be-EHT20 Out-of-Band Emissions - Ant 2 Channel 01 (2412 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission Report No.: R25S1036128-U202 78 of 219 802.11be-EHT20 Out-of-Band Emissions - Ant 2 Channel 11 (2462 MHz) Reference Level High Band Edge Spurious Emission

Test Report

Report No.: R25S1036128-U202 45 of 219 802.11n-HT20 - AVGPSD - Ant 2 Channel 01 (2412 MHz) Channel 06 (2437 MHz) Channel 11 (2462 MHz) 802.11n-HT40 - AVGPSD - Ant 2 Channel 03 (2422 MHz) Channel 06 (2437 MHz) Channel 09 (2452 MHz) Report No.: R25S1036128-U202 46 of 219 802.11ax-HE20 - AVGPSD - Ant 2 Channel 01 (2412 MHz) Channel 06 (2437 MHz) Channel 11 (2462 MHz) 802.11ax-HE40 - AVGPSD - Ant 2 Channel 03 (2422 MHz) Channel 06 (2437 MHz) Channel 09 (2452 MHz) Report No.: R25S1036128-U202 47 of 219 802.11be-EHT20 - AVGPSD - Ant 2 Channel 01 (2412 MHz) Channel 06 (2437 MHz) Channel 11 (2462 MHz) 802.11be-EHT40 - AVGPSD - Ant 2 Channel 03 (2422 MHz) Channel 06 (2437 MHz) Channel 09 (2452 MHz) Report No.: R25S1036128-U202 48 of 219 A.5 Conducted Band Edge and Out-of-Band Emissions Test Result Test Site WJ-SR2 Test Engineer Layla Gui Test Date 2026-01-04 ~ 2026-01-19 Test Mode Data Rate / MCS Channel No. Frequency (MHz) Limit 11b 1 Mbps 01 2412 30 dBc 11b 1 Mbps 06 2437 30 dBc 11b 1 Mbps 11 2462 30 dBc 11g 6 Mbps 01 2412 30 dBc 11g 6 Mbps 06 2437 30 dBc 11g 6 Mbps 11 2462 30 dBc 11n-HT20 MCS0 01 2412 30 dBc 11n-HT20 MCS0 06 2437 30 dBc 11n-HT20 MCS0 11 2462 30 dBc 11n-HT40 MCS0 03 2422 30 dBc 11n-HT40 MCS0 06 2437 30 dBc 11n-HT40 MCS0 09 2452 30 dBc 11ax-HE20 MCS0 01 2412 30 dBc 11ax-HE20 MCS0 06 2437 30 dBc 11ax-HE20 MCS0 11 2462 30 dBc 11ax-HE40 MCS0 03 2422 30 dBc 11ax-HE40 MCS0 06 2437 30 dBc 11ax-HE40 MCS0 09 2452 30 dBc 11be-EHT20 MCS0 01 2412 30 dBc 11be-EHT20 MCS0 06 2437 30 dBc 11be-EHT20 MCS0 11 2462 30 dBc 11be-EHT40 MCS0 03 2422 30 dBc 11be-EHT40 MCS0 06 2437 30 dBc 11be-EHT40 MCS0 09 2452 30 dBc Report No.: R25S1036128-U202 49 of 219 802.11b Out-of-Band Emissions - Ant 1 Channel 01 (2412 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission Report No.: R25S1036128-U202 50 of 219 802.11b Out-of-Band Emissions - Ant 1 Channel 11 (2462 MHz) Reference Level High Band Edge Spurious Emission Report No.: R25S1036128-U202 51 of 219 802.11g Out-of-Band Emissions - Ant 1 Channel 01 (2412 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission Report No.: R25S1036128-U202 52 of 219 802.11g Out-of-Band Emissions - Ant 1 Channel 11 (2462 MHz) Reference Level High Band Edge Spurious Emission Report No.: R25S1036128-U202 53 of 219 802.11n-HT20 Out-of-Band Emissions - Ant 1 Channel 01 (2412 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission Report No.: R25S1036128-U202 54 of 219 802.11n-HT20 Out-of-Band Emissions - Ant 1 Channel 11 (2462 MHz) Reference Level High Band Edge Spurious Emission Report No.: R25S1036128-U202 55 of 219 802.11n-HT40 Out-of-Band Emissions - Ant 1 Channel 03 (2422 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission Report No.: R25S1036128-U202 56 of 219 802.11n-HT40 Out-of-Band Emissions - Ant 1 Channel 09 (2452 MHz) Reference Level High Band Edge Spurious Emission Report No.: R25S1036128-U202 57 of 219 802.11ax-HE20 Out-of-Band Emissions - Ant 1 Channel 01 (2412 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission Report No.: R25S1036128-U202 58 of 219 802.11ax-HE20 Out-of-Band Emissions - Ant 1 Channel 11 (2462 MHz) Reference Level High Band Edge Spurious Emission Report No.: R25S1036128-U202 59 of 219 802.11ax-HE40 Out-of-Band Emissions - Ant 1 Channel 03 (2422 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission Report No.: R25S1036128-U202 60 of 219 802.11ax-HE40 Out-of-Band Emissions - Ant 1 Channel 09 (2452 MHz) Reference Level High Band Edge Spurious Emission Report No.: R25S1036128-U202 61 of 219 802.11be-EHT20 Out-of-Band Emissions - Ant 1 Channel 01 (2412 MHz) Reference Level Low Band Edge Spurious Emission Channel 06 (2437 MHz) Reference Level Spurious Emission

Test Report

MRT Technology (Suzhou) Co., Ltd. Report No.: R25S1036128-U202 Phone: +86-512-66308358 Report Version: V01 Web: www.mrt-cert.com Issue Date: 2026-04-20 Template Version: 2.2 1 of 219 RF MEASUREMENT REPORT FCC ID: 2BH7FEAP773V2 Applicant: TP-Link Systems Inc. Product: BE11000 Ceiling Mount Wi-Fi 7 Access Point Model No.: EAP773 Brand Name: tp-link FCC Classification: Digital Transmission System (DTS) FCC Rule Part(s): Part 15 Subpart C (Section 15.247) Result: Complies Received Date: 2025-12-15 Test Date: 2025-12-16 ~ 2026-03-07 Reviewed By: Yuri Li Approved By: Robin Wu The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report. Testing was performed in accordance with the applicable measurement procedures. The test results reported herein apply only to the specific item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: R25S1036128-U202 2 of 219 Revision History Report No. Version Description Issue Date Note R25S1036128-U202 V01 Initial Report 2026-04-20 Valid Report No.: R25S1036128-U202 3 of 219 CONTENTS Description Page 1. General Information ................................................................................................................................ 5 1.1. Applicant ...................................................................................................................................... 5 1.2. Manufacturer ................................................................................................................................ 5 1.3. Testing Facility ............................................................................................................................. 5 1.4. Product Information ...................................................................................................................... 6 1.5. Radio Specification under Test .................................................................................................... 6 1.6. Working Frequencies ................................................................................................................... 7 1.7. Antenna Details ............................................................................................................................ 8 2. Test Configuration ................................................................................................................................... 9 2.1. Test Mode ..................................................................................................................................... 9 2.2. Test System Connection Diagram................................................................................................ 9 2.3. Test Software ............................................................................................................................. 10 2.4. Applied Standards ...................................................................................................................... 10 2.5. Test Environment Condition ....................................................................................................... 10 3. Antenna Requirements ......................................................................................................................... 11 4. Measuring Instrument ........................................................................................................................... 12 5. Decision Rules and Measurement Uncertainty .................................................................................. 14 5.1. Decision Rules ........................................................................................................................... 14 5.2. Measurement Uncertainty .......................................................................................................... 14 6. Test Result .............................................................................................................................................. 15 6.1. Summary .................................................................................................................................... 15 6.2. 6 dB Bandwidth Measurement ................................................................................................... 16 6.2.1. Test Limit ......................................................…

Text truncated - open the document above for the full version.

Contact Information

Applicant

Sarah Wang
[email protected]Fax: 6263330234

Technical Contact

TP-Link Systems Inc.Sarah Wang
[email protected]

10 Mauchly, Irvine, CA 92618 · Irvine, 92618 · United States

Test Firm

MRT Technology (Suzhou) Co., Ltd.Mr. Marlin Chen
[email protected]

Technical Specifications

#Rule PartsFrequency RangePower Output
115C2.40 GHz - 2.48 GHz74.30 mW
215C2.41 GHz - 2.46 GHz489.80 mW
Confidentiality
Long Term
Grant Notes
Power Output listed is conducted. Device is an 802.11b/g/n/ax/be device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains 5GHz and 6GHz WLAN transmitters.