2BH7FT4EV3AC1200 Wi-Fi Bluetooth PCIe Adapter

a. Turn off your computer, unplug the power cable and remove the case panel. 1 Connect to a Computer Note: If the bracket is not suitable for your computer, detach it from the adapter's board and replace it with the low-profile bracket. b. Locate an available PCI-E slot and carefully insert the adapter. c. Connect the antenna to the adapter. d. Replace the case panel, plug in the power cable and turn on your computer. Connections are available Wireless Network Connection Connect automatically Connect √ TP-Link_XXXX 3 Join a Wireless Network a. Click the network icon ( or ) on the taskbar b. Select your Wi-Fi network, click Connect, and enter the password when prompted. 2 Install Driver Insert the CD and run the Autorun.exe. Select your adapter and follow the instructions to complete the installation Note: You can also download the driver and check the new release at https://www.tp-link.com/download-center Note: If you can’t install the driver successfully, disable the antivirus software and firewall, then try again. a. b. Wireless PCI Express Adapter Quick Installation Guide Images are for demonstration only. Q: How to find the hardware version of the adapter? For technical support, the user guide and other information, please visit https://www.tp-link.com/support, or simply scan the QR code. Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. Do not use damaged charger or USB cable to charge the device. Do not use the device where wireless devices are not allowed. 7106508108 REV3.0.1©2018 TP-Link FAQ A1 The hardware version (Ver:X.Y) is printed on the product label on the package or the adapter. The number X is the hardware version of the adapter. A2. For more detailed instructions, please visit https://www.tp-link.com/faq-46.html Model: S/N: Ver:X.Y Support

© 2024 TP-Link REV3.0.0 1910013263 User Guide AC1200 Wi-Fi Bluetooth PCIe Adapter 13 FCC STATEMENT Product Name: AC1200 Wi-Fi Bluetooth PCIe Adapter Model Number: Archer T4E/ Archer T5E Responsible party: TP-Link Systems Inc. Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: [email protected] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1 ) This device may not cause harmful interference. 2 ) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 14 Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” We, TP-Link Systems Inc. , has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 25/01/02 15 CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2400MHz—2483.5MHz(20dBm) 5150MHz—5250MHz(23dBm) 5250MHz—5350MHz(23dBm) 5470MHz—5725MHz(23dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/ EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Attention: This device may only be used indoors in all EU member states, EFTA countries and Northern Ireland. Frequency band: 5150 - 5250 MHz: Indoor use: Inside buildings only. Installations and use inside road vehicles and train carriages are not permitted. Limited outdoor use: If used outdoors, aircraft systems (UAS) is limited to within the 5170 - 5250 MHz band. Frequency band: 5250 - 5350 MHz: 16 Indoor use: Inside buildings only. Installations and use in road vehicles, trains and aircraft are not permitted. Outdoor use is not permitted. Frequency band: 5470 - 5725 MHz: Installations and use in road vehicles, trains and aircraft and use for unmanned aircraft systems (UAS) are not permitted. AT BE BG CH CY CZ DE DK EE EL ES FI FR HR HU IE IS IT LI LT LU LV MT NL NO PL PT RO SE SI SK UK(NI) UK declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/ Attention: This device may only be used indoors in Great Britain. UK Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. 17 This radio transmitter (IC: 32876-T4EV3/ Model: Archer T4E/Archer T5E) has been approved by Industry Canada to operat…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-4-2409G020 Page 1 of 186 FCC Radio Test Report FCC ID: 2BH7FT4EV3 This report concerns: Original Grant Project No. : 2409G020 Equipment : AC1200 Wi-Fi Bluetooth PCIe Adapter Brand Name : tp-link Test Model : Archer T4E Series Model : Archer T5E Applicant : TP-Link Systems Inc. Address : 10 Mauchly, Irvine, CA 92618 Manufacturer : TP-Link Systems Inc. Address : 10 Mauchly, Irvine, CA 92618 Date of Receipt : Oct. 18, 2024 Date of Test : Oct. 23, 2024 ~ Dec. 07, 2024 Issued Date : Jan. 03, 2025 Report Version : R00 Test Sample : Engineering Sample No.: DG2024101862 for radiated and ac power line conducted, DG2024101863 for others. Standard(s) : FCC CFR Title 47, Part 15, Subpart E The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Chella Zheng Approved by : Chay Cai Room 108-116, 309-310, Building 2, No.1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong, People’s Republic of China Te l : +86-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-4-2409G020 Page 2 of 186 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-4-2409G020 Page 3 of 186 Table of Contents Page REPORT ISSUED HISTORY 6 1 . APPLICABLE STANDARDS 7 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 2.3 TEST ENVIRONMENT CONDITIONS 9 3 . GENERAL INFORMATION 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 TEST MODES 13 3.3 PARAMETERS OF TEST SOFTWARE 16 3.4 DUTY CYCLE 18 3.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 20 3.6 SUPPORT UNITS 20 3.7 CUSTOMER INFORMATION DESCRIPTION 20 4 . AC POWER LINE CONDUCTED EMISSIONS 21 4.1 LIMIT 21 4.2 TEST PROCEDURE 21 4.3 DEVIATION FROM TEST STANDARD 21 4.4 TEST SETUP 22 4.5 EUT OPERATION CONDITIONS 22 4.6 TEST RESULTS 22 5 . RADIATED EMISSIONS 23 5.1 LIMIT 23 5.2 TEST PROCEDURE 24 5.3 DEVIATION FROM TEST STANDARD 25 5.4 TEST SETUP 25 5.5 EUT OPERATION CONDITIONS 27 5.6 TEST RESULTS - 9 KHZ TO 30 MHZ 27 5.7 TEST RESULTS - 30 MHZ TO 1000 MHZ 27 5.8 TEST RESULTS - ABOVE 1000 MHZ 27 6 . BANDWIDTH 28 6.1 LIMIT 28 6.2 TEST PROCEDURE 28 Report No.: BTL-FCCP-4-2409G020 Page 4 of 186 Table of Contents Page 6.3 DEVIATION FROM STANDARD 28 6.4 TEST SETUP 29 6.5 EUT OPERATION CONDITIONS 29 6.6 TEST RESULTS 29 7 . MAXIMUM OUTPUT POWER 30 7.1 LIMIT 30 7.2 TEST PROCEDURE 30 7.3 DEVIATION FROM STANDARD 30 7.4 TEST SETUP 30 7.5 EUT OPERATION CONDITIONS 30 7.6 TEST RESULTS 30 8 . POWER SPECTRAL DENSITY 31 8.1 LIMIT 31 8.2 TEST PROCEDURE 31 8.3 DEVIATION FROM STANDARD 31 8.4 TEST SETUP 32 8.5 EUT OPERATION CONDITIONS 32 8.6 TEST RESULTS 32 9 . FREQUENCY STABILITY 33 9.1 LIMIT 33 9.2 TEST PROCEDURE 33 9.3 DEVIATION FROM STANDARD 33 9.4 TEST SETUP 33 9.5 EUT OPERATION CONDITIONS 33 9.6 TEST RESULTS 33 10 . MEASUREMENT INSTRUMENTS LIST 34 11 . EUT TEST PHOTOS 36 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 42 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 45 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 50 APPENDIX D - RADIATED EMISSION - ABOVE 1000 MHZ 53 APPENDIX E - BANDWIDTH 131 APPENDIX F - MAXIMUM OUTPUT POWER 148 Report No.: BTL-FCCP-4-2409G020 Page 5 of 186 Table of Contents Page APPENDIX G - POWER SPECTRAL DENSITY 167 Report No.: BTL-FCCP-4-2409G020 Page 6 of 186 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCCP-4-2409G020 R00 Original Report. Jan. 03, 2025 Valid Report No.: BTL-FCCP-4-2409G020 Page 7 of 186 1. APPLICABLE STANDARDS According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: ANSI C63.10-2013 The following reference test guidance is not within the scope of accreditation of A2LA: KDB 789033 D02 General UNII Test Procedures New Rules v02r01 KDB 662911 D01 Multiple Transmitter Output v02r01 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC CFR Title 47, Part 15, Subpart E Standard(s) Section Test Item Test Result Judgment Remark 15.207 15.407(b) AC Power Line Conducted Emi…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-4-2409G020 Page 36 of 186 11. EUT TEST PHOTOS AC Power Line Conducted Emissions Test Photos Report No.: BTL-FCCP-4-2409G020 Page 37 of 186 Radiated Emissions Test Photos 9 kHz to 30 MHz Report No.: BTL-FCCP-4-2409G020 Page 38 of 186 Radiated Emissions Test Photos 30 MHz to 1 GHz Report No.: BTL-FCCP-4-2409G020 Page 39 of 186 Radiated Emissions Test Photos Harmonic(1 GHz to 18 GHz) & Band edge Report No.: BTL-FCCP-4-2409G020 Page 40 of 186 Radiated Emissions Test Photos Harmonic(Above 18 GHz) Report No.: BTL-FCCP-4-2409G020 Page 41 of 186 Conducted Test Photos

Report No.: BTL-FCCP-5-2409C020 Page 22 of 23 10. EUT TEST PHOTO Report No.: BTL-FCCP-5-2409C020 Page 23 of 23 End of Test Report

Report No.: BTL-FCCP-5-2409C020 Page 1 of 23 FCC DFS Test Report FCC ID: 2BH7FT4EV3 This report concerns: Original Grant Project No. : 2409G020 Equipment : AC1200 Wi-Fi Bluetooth PCIe Adapter Brand Name : tp-link Test Model : Archer T4E Series Model : Archer T5E Applicant : TP-Link Systems Inc. Address : 10 Mauchly, Irvine, CA 92618 Manufacturer : TP-Link Systems Inc. Address : 10 Mauchly, Irvine, CA 92618 Date of Receipt : Oct. 18, 2024 Date of Test : Oct. 23, 2024 ~ Dec. 07, 2024 Issued Date : Jan. 03, 2025 Report Version : R00 Test Sample : Engineering Sample No.: DG2024101861 Standard(s) : FCC CFR Title 47, Part 15, Subpart E The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Chella Zheng Approved by : Chay Cai Room 108-116, 309-310, Building 2, No.1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong, People’s Republic of China Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-5-2409C020 Page 2 of 23 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-5-2409C020 Page 3 of 23 Table of Contents Page REPORT ISSUED HISTORY 4 1 . APPLICABLE STANDARDS 5 2 . SUMMARY OF TEST RESULTS 5 3 . TEST FACILITY 6 4 . TEST ENVIRONMENT CONDITIONS 6 5 . GENERAL INFORMATION 7 5.1 GENERAL DESCRIPTION OF EUT 7 5.2 CUSTOMER INFORMATION DESCRIPTION 10 5.3 MAXIMUM OUTPUT POWER AND E.I.R.P. 10 5.4 DESCRIPTION OF TEST MODES 10 6 . U-NII DFS RULE REQUIREMENTS 11 6.1 WORKING MODES AND REQUIRED TEST ITEMS 11 6.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS 12 7 . MEASUREMENT INSTRUMENTS LIST 13 8 . DYNAMIC FREQUENCY SELECTION (DFS) 14 8.1 DFS MEASUREMENT SYSTEM 14 8.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL 16 8.3 DEVIATION FROM TEST STANDARD 16 9 . TEST RESULTS 17 9.1 SUMMARY OF DFS TEST RESULT 17 9.2 DFS DETECTION THRESHOLD 18 9.3 CHANNEL MOVE TIME AND CHANNEL CLOSING TRANSMISSION TIME 19 9.4 NON-OCCUPANCY PERIOD 21 10 . EUT TEST PHOTO 22 Report No.: BTL-FCCP-5-2409C020 Page 4 of 23 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCCP-5-2409C020 R00 Original Report. Jan. 03, 2025 Valid Report No.: BTL-FCCP-5-2409C020 Page 5 of 23 1. APPLICABLE STANDARDS According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02 The following reference test guidance is not within the scope of accreditation of A2LA: KDB 789033 D02 General U-NII Test Procedures New Rules v02r01 KDB 905462 D03 UNII Clients Without Radar Detection New Rules v01r02 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC CFR Title 47, Part 15, Subpart E Standard(s) Section Test Item Test Result Judgment Remark FCC 15.407(h) Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) ------ PASS ------ Report No.: BTL-FCCP-5-2409C020 Page 6 of 23 3. TEST FACILITY The test facilities used to collect the test data in this report is at the location of 1-2/F, 4/F, Building A, 1-2 / F, Building B, 3/F, Building C, No.3, Jinshagang 1st Road, Dalang Town, Dongguan City, Guangdong People’s Republic of China. BTL's Registration Number for FCC: 747969 BTL's Designation Number for FCC: CN1377. 4. TEST ENVIRONMENT CONDITIONS Test Item Temperature Humidity Test Voltage Tested By Test Date Dynamic Frequency Selection (DFS) 23°C 59% DC 3.3V Zack Zhang Dec. 07, 2024 Report No.: BTL-FCCP-5-2409C020 Page 7 of 23 5. GENERAL INFORMATION 5.1 GENERAL DESCRIPTION OF EUT Equipment AC1200 Wi-Fi Bluetooth PCIe Adapter Brand Name tp-link Test Model Archer T4E Series Model Archer T5E Model Difference(s) Only differ in model name. Hardware Version Archer T4EV3 Power Source Supplied from PC PCIe Slot. Power Rating DC 3.3V Operation Frequency Band(s) UNII-2A: 5250 MHz ~ 5350 MHz UNII-2C: 5470 MHz ~ 5725 MHz Modulation Type IEEE 802.11a/n/ac: OFDM Bit Rate of Transmitter IEEE 802.11a: 54/48/36/24/18/12/9/6 Mbps IEEE 802.11n: up to 300 Mbps IEEE 802.11ac: up to …

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-4-2409G020 Page 173 of 186 Test Mode UNII-2A_TX AC(VHT20) Mode_Ant. 1 Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Duty Factor Power Spectral Density + Duty Factor (dBm/MHz) Max. Limit (dBm/MHz) Result 52 5260 6.29 0.86 7.15 11.00 Complies 60 5300 5.86 0.86 6.72 11.00 Complies 64 5320 5.79 0.86 6.65 11.00 Complies CH52 CH60 CH64 Test Mode UNII-2A_TX AC(VHT20) Mode_Ant. 2 Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Duty Factor Power Spectral Density + Duty Factor (dBm/MHz) Max. Limit (dBm/MHz) Result 52 5260 6.12 0.86 6.98 11.00 Complies 60 5300 6.31 0.86 7.17 11.00 Complies 64 5320 6.42 0.86 7.28 11.00 Complies CH52 CH60 CH64 Test Mode UNII-2A_TX AC(VHT20) Mode_Total Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Max. Limit (dBm/MHz) Result 52 5260 10.08 11.00 Complies 60 5300 9.96 11.00 Complies 64 5320 9.99 11.00 Complies Report No.: BTL-FCCP-4-2409G020 Page 174 of 186 Test Mode UNII-2A_TX AC(VHT40) Mode_Ant. 1 Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Duty Factor Power Spectral Density + Duty Factor (dBm/MHz) Max. Limit (dBm/MHz) Result 54 5270 2.49 0.00 2.49 11.00 Complies 62 5310 2.43 0.00 2.43 11.00 Complies CH54 CH62 Test Mode UNII-2A_TX AC(VHT40) Mode_Ant. 2 Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Duty Factor Power Spectral Density + Duty Factor (dBm/MHz) Max. Limit (dBm/MHz) Result 54 5270 1.25 0.00 1.25 11.00 Complies 62 5310 1.67 0.00 1.67 11.00 Complies CH54 CH62 Test Mode UNII-2A_TX AC(VHT40) Mode_Total Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Max. Limit (dBm/MHz) Result 54 5270 4.92 11.00 Complies 62 5310 5.08 11.00 Complies Report No.: BTL-FCCP-4-2409G020 Page 175 of 186 Te s t Mode UNII-2A_TX AC(VHT80) Mode_Ant. 1 Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Duty Factor Power Spectral Density + Duty Factor (dBm/MHz) Max. Limit (dBm/MHz) Result 58 5290 0.94 0.18 1.12 11.00 Complies CH58 Test Mode UNII-2A_TX AC(VHT80) Mode_Ant. 2 Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Duty Factor Power Spectral Density + Duty Factor (dBm/MHz) Max. Limit (dBm/MHz) Result 58 5290 0.41 0.18 0.59 11.00 Complies CH58 Test Mode UNII-2A_TX AC(VHT80) Mode_Total Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Max. Limit (dBm/MHz) Result 58 5290 3.87 11.00 Complies Report No.: BTL-FCCP-4-2409G020 Page 176 of 186 Test Mode UNII-2C_TX A Mode_Ant. 1 Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Duty Factor Power Spectral Density + Duty Factor (dBm/MHz) Max. Limit (dBm/MHz) Result 100 5500 7.33 0.15 7.48 11.00 Complies 116 5580 7.49 0.15 7.64 11.00 Complies 140 5700 7.49 0.15 7.64 11.00 Complies 144 5720 7.00 0.15 7.15 11.00 Complies CH100 CH116 CH140 CH144 Report No.: BTL-FCCP-4-2409G020 Page 177 of 186 Test Mode UNII-2C_TX A Mode_Ant. 2 Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Duty Factor Power Spectral Density + Duty Factor (dBm/MHz) Max. Limit (dBm/MHz) Result 100 5500 7.55 0.15 7.70 11.00 Complies 116 5580 7.35 0.15 7.50 11.00 Complies 140 5700 7.46 0.15 7.61 11.00 Complies 144 5720 7.26 0.15 7.41 11.00 Complies CH100 CH116 CH140 CH144 Test Mode UNII-2C_TX A Mode_Total Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Max. Limit (dBm/MHz) Result 100 5500 10.60 11.00 Complies 116 5580 10.58 11.00 Complies 140 5700 10.64 11.00 Complies 144 5720 10.29 11.00 Complies Report No.: BTL-FCCP-4-2409G020 Page 178 of 186 Test Mode UNII-2C_TX AC(VHT20) Mode_Ant. 1 Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Duty Factor Power Spectral Density + Duty Factor (dBm/MHz) Max. Limit (dBm/MHz) Result 100 5500 5.45 0.86 6.31 11.00 Complies 116 5580 4.87 0.86 5.73 11.00 Complies 140 5700 6.32 0.86 7.18 11.00 Complies 144 5720 6.50 0.86 7.36 11.00 Complies CH100 CH116 CH140 CH144 Report No.: BTL-FCCP-4-2409G020 Page 179 of 186 Test Mode UNII-2C_TX AC(VHT20) Mode_Ant. 2 Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Duty Factor Power Spectral Density + Duty Factor (dBm/MHz) Max. Limit (dBm/MHz) Result 100 5500 6.49 0.86 7.35 11.00 Complies 116 5580 6.40 0.86 7.26 11.00 Complies 140 5700 6.10 0.86 6.96 11.00 Complies 144 5720 6.16 0.86 7.02 11.00 Complies CH100 CH116 CH140 CH144 Test Mode UNII-2C_TX AC(VHT20) Mode_Total Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Max. Limit (dBm/MHz) Result 100 5500 9.87 11.00 Complies 116 5580 9.58 11.00 Complies 140 5700 10.09 11.00 Complies 144 5720 10.20 11.00 Complies Report No.: BTL-FCCP-4-2409G020 Page 180 of 186 Test Mode UNII-2C_TX AC(VHT40) Mode_Ant. 1 Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Duty Factor Power Spectral Density + Duty Factor (dBm/MHz) Max. Limit (dBm/MHz) Result 102 5510 2.35 0.00 2.35 11.00 Complies 110 5550 2.49 0.00 2.49 11.00 Complies 134 5670 2.13 0.00 2.13 11.00 Complies 142 5710 3.95 0.00 3.95 11.00 Complies CH102 CH110 CH134 CH142 Report No.: BTL-FCCP-4-2409G020 Page 181 of 186 Test Mode UNII-2C_TX AC(VHT40) Mode_Ant. 2 Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Duty Factor Power Spectral Density + Duty Factor (dBm/MHz) Max. Limit (dBm/MHz) Result 102 5510 2.51 0.00 2.51 11.00 Complies 110 5550 3.45 0.00 3.45 11.00 Complies 134 5670 3.55 0.00 3.55 11.00 Complies 142 5710 4.46 0.00 4.46 11.00 Complies CH102 CH110 CH134 CH142 Test Mode UNII-2C_TX AC(VHT40) Mode_Total Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Max. Limit (dBm/MHz) Result 102 5510 5.44 11.00 Complies 110 5550 6.01 11.00 Complies 134 5670 5.91 11.00 Complies 142 5710 7.22 11.00 Complies Report No.: BTL-FCCP-4-2409G020 Page 182 of 186 Test Mode UNII-2C_TX AC(VHT80) Mode_Ant. 1 Channel Frequency (MHz) Power Spectral Density (dBm/MHz) Duty Factor Power Spectral Density + Duty Factor (dBm/MHz) Max. Limit (dBm/MHz) Result 106 5530 1.50 0.18 1.68 11.00 Complies 122 5610 0.70 0.18 0.88 11.00 Complies 138 5690 1.18 0.18 1.36 11.00 Complies CH106 CH122 CH138 Test Mode UNII-2C_TX AC(VHT80) Mode_Ant. 2 Channel Frequency (MHz) Power Spectral Density (dBm/…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-4-2409G020 Page 136 of 186 Test Mode UNII-2A_TX A Mode Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 52 5260 26.089 16.600 60 5300 25.299 16.600 64 5320 26.399 16.600 CH52 CH60 CH64 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-4-2409G020 Page 137 of 186 Test Mode UNII-2A_TX AC(VHT20) Mode Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 52 5260 23.097 17.800 60 5300 21.198 17.800 64 5320 20.689 17.700 CH52 CH60 CH64 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-4-2409G020 Page 138 of 186 Test Mode UNII-2A_TX AC(VHT40) Mode Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 54 5270 40.198 36.800 62 5310 40.400 36.800 CH54 CH62 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-4-2409G020 Page 139 of 186 Test Mode UNII-2A_TX AC(VHT80) Mode Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 58 5290 139.190 76.000 CH58 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-4-2409G020 Page 140 of 186 Test Mode UNII-2C_TX A Mode Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 100 5500 40.700 19.400 116 5580 40.750 21.700 140 5700 40.650 20.600 144 5720 25.150 16.800 CH100 CH116 CH140 26 dB Bandwidth 99 % Occupied Bandwidth CH144 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-4-2409G020 Page 141 of 186 Test Mode UNII-2C_TX AC(VHT20) Mode Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 100 5500 37.299 18.100 116 5580 37.248 18.100 140 5700 36.448 18.000 144 5720 23.450 18.000 CH100 CH116 CH140 26 dB Bandwidth 99 % Occupied Bandwidth CH144 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-4-2409G020 Page 142 of 186 Test Mode UNII-2C_TX AC(VHT40) Mode Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 102 5510 49.198 38.600 110 5550 41.100 38.000 134 5670 41.598 38.000 142 5710 51.300 37.800 CH102 CH110 CH134 26 dB Bandwidth 99 % Occupied Bandwidth CH142 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-4-2409G020 Page 143 of 186 Test Mode UNII-2C_TX AC(VHT80) Mode Channel Frequency (MHz) 26 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 106 5530 180.798 97.200 122 5610 178.390 85.200 138 5690 111.192 76.400 CH106 CH122 CH138 26 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-4-2409G020 Page 144 of 186 Test Mode UNII-3_TX A Mode Channel Frequency (MHz) 6 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 6 dB Bandwidth Min. Limit (MHz) Result 149 5745 16.350 16.900 0.5 Complies 157 5785 16.450 17.600 0.5 Complies 165 5825 16.350 16.700 0.5 Complies CH149 CH157 CH165 6 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-4-2409G020 Page 145 of 186 Test Mode UNII-3_TX AC(VHT20) Mode Channel Frequency (MHz) 6 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 6 dB Bandwidth Min. Limit (MHz) Result 149 5745 17.050 18.900 0.5 Complies 157 5785 17.249 19.400 0.5 Complies 165 5825 16.999 19.100 0.5 Complies CH149 CH157 CH165 6 dB Bandwidth 99 % Occupied Bandwidth Report No.: BTL-FCCP-4-2409G020 Page 146 of 186 Test Mode UNII-3_TX AC(VHT40) Mode Channel Frequency (MHz) 6 dB Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) 6 dB Bandwidth Min. Limit (MHz) Result 151 5755 35.400 37.400 0.5 Complies 159 5795 35.390 37.000 0.5 Complies CH151 CH159 6 dB Bandwidth 9…

Text truncated - open the document above for the full version.