2BH7QA322330Hand-held Slit-Lamp

INSTRUCTION MANUAL Hand-Held Slit Lamp KOWA KOWA SL-19 FOR VETERINARY US I Congratulations on your purchase of the KOWA SL-19 (Camera Model). This manual provides a description of the operating procedures and important precautions to be observed during its use. Please read this manual carefully to ensure that the instrument can perform to its full capabilities and work safely. After you have finished reading, keep this manual in an easily accessible location for future reference. Safety Precautions This manual describes important precautions to be observed when you use the instrument to ensure that the instrument is used safely without causing any damage to the human body or property of the purchaser and other persons. The following designations and pictorial symbols should be fully comprehended before reading the manual. Meanings of Designations Warning Improper operation may result in serious injury *1 or death. Caution Improper operation may result in bodily injury *2 or property damage *3 . *1 Serious injury means vision loss, an injury, high- or low-temperature burn, electrical shock, fracture, or poisoning that causes a subsequent complication or requires hospitalization or long-term outpatient treatment. *2 Bodily injury means an injury, burn, electrical shock and so forth that will not necessitate hospitalization or long-term outpatient treatment. *3 Damage to property means extensive damage to a house and/or household goods as well as a domestic animal and pet. Meanings of Symbols Graphical indication of any warning and caution. What is warned is explicitly and pictorially indicated by a picture or its associated message on or near a pictorial symbol. Graphical indication of prohibited operation (prohibitive item). What is prohibited is explicitly and pictorially indicated by a picture or its associated message on or near a pictorial symbol. Graphical indication of any mandatory action (obligatory item). What must always be done is explicitly and pictorially indicated by a picture or its associated message on or near a pictorial symbol. Disclaimer KOWA is not responsible for: • Any damage caused by fire, earthquake, third party action, abuse or use under abnormal conditions, or any accident caused by a user's intentional or unintentional error. • Any incidental damage resulting from use of the product or its malfunction (e.g. loss of operating profit, business disruption, change/loss of stored data and so forth). • Any damage resulting from disregarding what is described in this manual. • Any damage resulting from malfunctioning caused by a combination of connected devices. Introduction II WarningWarning Prohibitory Do not place a container or cup containing liquid near the instrument. Spilled liquid entering into the instrument may cause electrical shock. If liquid should be spilled into the instrument, contact KOWA or an authorized KOWA dealer for inspection. Do not touch the battery box with a wet hand. Otherwise, it may cause electrical shock. Do not short-circuit the terminals of the instrument or battery box. Otherwise, it may cause fire or electrical shock. Do not disassemble, modify or repair the instrument by yourself. Otherwise, fire, electrical shock, bodily injury, or instrument malfunction may occur. Refer all servicing to KOWA or authorized KOWA dealer. The instrument disassembled, modified or repaired by anyone other than a KOWA designated repair facility will void the warranty. Obligatory If an unusual smell, unusual noise, overheating, or smoke is generated when the slit button is turned on, turn off the slit button immediately. Continuous use may result in fire or instrument damage. Contact KOWA or authorized Kowa dealer for inspection. Use the designated battery box. Use of a battery box other than the designated one may cause fire or malfunction. Remove the batteries when they are exhausted or when the unit will not be used for a long period of time (more than three months). Leaving the battery in the unit for a long time may cause battery fluid leakage. Remove used batteries and replace them with new ones at the same time. The Ni-MH battery and its charger are not medical devices. Please contact the battery/charger manufacturer for trouble with the nickel metal hydride battery or its charger. Natural rubber is used inside the Filter Band. In rare cases, natural rubber may cause allergic symptoms such as itching, redness, hives, swelling, fever, dyspnea, asthma-like symptoms, decreased blood pressure, and shock. If you note any of these symptoms, stop using this instrument. CautionCaution Prohibitory Do not wipe the exterior with benzene, thinner, or ethanol. It may lead to discoloration or deterioration. If the terminals are soiled, wipe with a dry soft cloth containing. Do not place your hands between the revolving arm and the coupled arm. It may lead to injury if the hand is caught when the arms move. Do not put your fingers between the prism boxes. The hand may be caught and lead to injury when adjusting interpupillary distance. Do not place this instrument on an unstable surface, such as a wobbly or tilted surface. This instrument may fall and could cause injury. Do not use the product in humid, dusty, oily smoke, or steamy locations. Using this instrument in such environments could lead to fire or electric shock. Attach the battery box properly. A dropped battery box may cause damage or injury. Obligatory When using or carrying the instrument, hold it firmly. Dropping the instrument may lead to injury. Do not use this instrument in a low-temperature environment below 10°C or in a high- temperature environment above 35°C. It may cause damage to this instrument. III Components and Supplies Main unit and standard items Main unit (including battery box): 1 Dust cover: 1Other Instruction Manual: 1 Optional items Barrier Filter B: 1 Filter Band: 1 IV Meanings of Symbols Main unit V Meaning of Symbols Barrier Filter B (optional items) Symbol for “Follow instru…

Text truncated - open the document above for the full version.

20 September 2024

4.Product Portrait(Outside) Top Bottom FrontRight Back Left

6.ラベル図 •Explanation of how the labeling is done Label(Surface base material=Polyethylene terephthalate, Adhesive=Acrylic ester copolymer) paste •Surface durability REPORT350-210108(StandardIEC60601-1 :2005+A1:2012), ConformstoConformstobullet7.1.3(Durability of labeling) •FCClabelingrequirements Device labeling “FCCID:2BH7QA322330” The locationof the FCCID label is shown in the Instruction Manual． •FontsizeofFCCID Characterheight 1.5mm location of FCC ID label

4.Product photo (inside) PCBCamera1 Wireless Module Front Back PCBCamera2＝Wireless Module Front Back PCB Camera1 Antenna HK1457A PCB Front Back HK1457A PCB

Test Report No. 15377688H-D-R1 Page 1 of 80 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 SAR TEST REPORT Test Report No. 15377688H-D-R1 Customer Kowa Company. Ltd. Description of EUT Hand-held Slit-Lamp Model Number of EUT KOWA SL-19 FCC ID 2BH7QA322330 Test Regulation FCC47CFR 2.1093 Test Result Complied Issue Date September 26, 2024 Remarks *The highest reported SAR Standalone: 1.07 W/kg Representative test engineer Approved by Takeshi Hiyaji Engineer Takayuki Shimada Leader CERTIFICATE 5107.02 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan, Inc. There is no testing item of "Non-accreditation". Report Cover Page - Form-ULID-003532 (DCS:13-EM-F0429) Issue# 23.0 Test Report No. 15377688H-D-R1 Page 2 of 80 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 ANNOUNCEMENT REVISION HISTORY Original Test Report No. 15377688H-D This report is a revised version of 15377688H-D. 15377688H-D is replaced with this report . Revision Test report No. Date Page Revised Contents - (Original) 15377688H-D September 9, 2024 - 1 15377688H-D-R1 September 26, 2024 Section 13 -Added table (The standard measuring distance). -Replaced descriptive text blow table (The standard measuring distance). Appendix 1 -Modified the target value for 5180 MHz to 5250 MHz. Appendix 2 -Added feed power column. -Modified the 10g dev value.  This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc.  The results in this report apply only to the sample tested. (Laboratory was not involved in sampling.)  This sample tested is in compliance with the limits of the above regulation.  The test results in this test report are traceable to the national or international standards.  This test report must not be used by the customer to claim product certification, approval, or endorsement by the A2LA accreditation body.  This test report covers SAR technical requirements.  It does not cover administrative issues such as Manual or non-SAR test related Requirements. (if applicable)  The all test items in this test report are conducted by UL Japan, Inc. Ise EMC Lab.  The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan, Inc. has been accredited.  The information provided by the customer for this report is identified in SECTION 1.  The laboratory is not responsible for information provided by the customer which can impact the validity of the results.  For test report(s) referred in this report, the latest version (including any revisions) is always referred. Test Report No. 15377688H-D-R1 Page 3 of 80 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Reference: Abbreviations (Including words undescribed in this report) AAN Asymmetric Artificial Network GPS Global Positioning System AC Alternating Current Hori. Horizontal AM Amplitude Modulation ICES Interference-Causing Equipment Standard AMN Artificial Mains Network I/O Input/Output Amp, AMP Amplifier IEC International Electrotechnical Commission ANSI American National Standards Institute IEEE Institute of Electrical and Electronics Engineers Ant, ANT Antenna IF Intermediate Frequency AP Access Point ILAC International Laboratory Accreditation Conference ASK Amplitude Shift Keying ISED Innovation, Science and Economic Development Canada Atten., ATT Attenuator ISN Impedance Stabilization Network AV Average ISO International Organization for Standardization BPSK Binary Phase-Shift Keying JAB Japan Accreditation Board BR Bluetooth Basic Rate LAN Local Area Network BT Bluetooth LCL Longitudinal Conversion Loss BT LE Bluetooth Low Energy LIMS Laboratory Information Management System BW BandWidth LISN Line Impedance Stabilization Network C.F Correction Factor MRA Mutual Recognition Arrangement Cal Int Calibration Interval N/A Not Applicable CAV CISPR AV NIST National Institute of Standards and Technology CCK Complementary Code Keying NS No signal detect. CDN Coupling Decoupling Network NSA Normalized Site Attenuation Ch., CH Channel OBW Occupied BandWidth CISPR Comite International Special des Perturbations Radioelectriques OFDM Orthogonal Frequency Division Multiplexing Corr. Correction PER Packet Error Rate CPE Customer premise equipment PK Peak CW Continuous Wave P LT long-term flicker severity DBPSK Differential BPSK POHC(A) Partial Odd Harmonic Current DC Direct Current Pol., Pola. Polarization DET Detector PR-ASK Phase Reversal ASK D-factor Distance factor P ST short-term flicker severity Dmax maximum absolute voltage change during an observation period QAM Quadrature Amplitude Modulation DQPSK Differential QPSK QP Quasi-Peak DSSS Direct Sequence Spread Spectrum QPSK Quadrature Phase Shift Keying DUT Device Under Test r.m.s., RMS Root Mean Square EDR Enhanced Data Rate RBW Resolution BandWidth e.i.r.p., EIRP Equivalent Isotropically Radiated Power RE Radio Equipment EM clamp Electromagnetic clamp REV Reverse EMC ElectroMagnetic Compatibility RF Radio Frequency EMI ElectroMagnetic Interference RFID Radio Frequency Identifier EMS ElectroMagnetic Susceptibility RNSS Radio Navigation Satellite Service EN European Norm RSS Radio Standards Specifications e.r.p., ERP Effective Radiated Power Rx Receiving ETSI European Telecommunications Standards Institute SINAD Ratio of (Signal + Noise + Distortion) to (Noise + Distortion) EU European Union S/N Signal to Noise ratio EUT Equipment Under Test SA, S/A Spectrum Analyzer Fac. Factor SG Signal Generator FCC Federal Communications Commission SVSWR Site-Voltage Standing Wave Ratio FHSS Frequency Hopping Spread Spectrum THC(A) Total Harmonic Current FM Frequency Modulation THD(%) Total Harmonic Distortion Freq. Frequency TR, T/R Test Receiver FSK Frequency Shift Keying Tx Transmitting Fund Fundamental VBW Video BandWidth FWD Forward V…

Text truncated - open the document above for the full version.

Test Report No. 15377688H-B-R1 Page 1 of 36 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 RADIO TEST REPORT Test Report No. 15377688H-B-R1 Customer Kowa Company. Ltd. Description of EUT Hand-held Slit-Lamp Model Number of EUT KOWA SL-19 FCC ID 2BH7QA322330 Test Regulation FCC Part 15 Subpart E Test Result Complied Issue Date September 26, 2024 Remarks WLAN (5 GHz band) part Representative Test Engineer Approved By Daiki Matsui Engineer Takayuki Shimada Leader CERTIFICATE 5107.02 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan, Inc. There is no testing item of "Non-accreditation". Report Cover Page - Form-ULID-003532 (DCS:13-EM-F0429) Issue# 23.0 Test Report No. 15377688H-B-R1 Page 2 of 36 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 ANNOUNCEMENT REVISION HISTORY Original Test Report No. 15377688H-B This report is a revised version of 15377688H-B. 15377688H-B is replaced with this report. Revision Test Report No. Date Page Revised Contents - (Original) 15377688H-B September 9, 2024 - 1 15377688H-B-R1 September 26, 2024 Section 5 Figure 1: Test Setup -Modified tested frequency band. 10 GHz to 26.5 GHz→ 10 GHz to 40 GHz APPENDIX 1 Maximum Conducted Output Power -Modified the limit. mobile and portable client device→ access point Maximum Power Spectral Density -Modified the limit. mobile and portable client device→ access point Burst rate confirmation -Modified worst rate for 11a. MCS 0→6 Mbps  This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc.  The results in this report appl y only to the sample tested. (Laboratory was not involved in sampling.)  This sample tested is in compliance with the limits of the above re gulation.  The test results in this test report are traceable to the national or international standards.  This test report must not be used by the customer to claim product certification, approval, or endorsement b y the A2LA accreditation body.  This test report covers Radio technical requirements. It does not cover administrative issues such as Manual or non-Radio test related Requirements. (if applicable)  The all test items in this test report are conducted b y UL Japan, Inc. Ise EMC Lab.  The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan, Inc. has been accredited.  The information provided b y the customer for this report is identified in SECTION 1.  The laboratory is not responsible for information provided by the customer which can impact the validit y of the results.  For test report (s) referred in this report, the latest version (including any revisions) is always referred. Test Report No. 15377688H-B-R1 Page 3 of 36 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Reference: Abbreviations (Including words undescribed in this report) A2LA The American Association for Laboratory Accreditation ICES Interference-Causing Equipment Standard AC Alternating Current IEC International Electrotechnical Commission AFH Adaptive Frequency Hopping IEEE Institute of Electrical and Electronics Engineers AM Amplitude Modulation IF Intermediate Frequency Amp, AMP Amplifier ILAC International Laboratory Accreditation Conference ANSI American National Standards Institute ISED Innovation, Science and Economic Develo pment Canada Ant, ANT Antenna ISO International Organization for Standardization AP Access Point JAB Japan Accreditation Board ASK Amplitude Shift Keying LAN Local Area Network Atten., ATT Attenuator LIMS Laboratory Information Management System AV Average MCS Modulation and Coding Scheme BPSK Binary Phase-Shift Keying MRA Mutual Recognition Arrangement BR Bluetooth Basic Rate N/A Not Applicable BT Bluetooth NIST National Institute of Standards and Technology BT LE Bluetooth Low Energy NS No signal detect. BW BandWidth NSA Normalized Site Attenuation Cal Int Calibration Interval NVLAP National Voluntary Laboratory Accreditation Pro gram CCK Complementary Code Keying OBW Occupied Band Width Ch., CH Channel OFDM Orthogonal Frequency Division Multiplexing CISPR Comite International Special des Perturbations Radioelectri ques P/M Power meter CW Continuous Wave PCB Printed Circuit Board DBPSK Differential BPSK PER Packet Error Rate DC Direct Current PHY Physical Layer D-factor Distance factor PK Peak DFS Dynamic Frequency Selection PN Pseudo random Noise DQPSK Differential QPSK PRBS Pseudo-Random Bit Sequence DSSS Direct Sequence Spread Spectrum PSD Power Spectral Density EDR Enhanced Data Rate QAM Quadrature Amplitude Modulation EIRP, e.i.r.p. Equivalent Isotropically Radiated Power QP Quasi-Peak EMC ElectroMagnetic Compatibility QPSK Quadri-Phase Shift Keying EMI ElectroMagnetic Interference RBW Resolution Band Width EN European Norm RDS Radio Data System ERP, e.r.p. Effective Radiated Power RE Radio Equipment EU European Union RF Radio Frequency EUT Equipment Under Test RMS Root Mean Square Fac. Factor RSS Radio Standards Specifications FCC Federal Communications Commission Rx Receiving FHSS Frequency Hopping Spread Spectrum SA, S/A Spectrum Analyzer FM Frequency Modulation SG Signal Generator Freq. Frequency SVSWR Site-Voltage Standing Wave Ratio FSK Frequency Shift Keying TR Test Receiver GFSK Gaussian Frequency-Shift Keying Tx Transmitting GNSS Global Navigation Satellite System VBW Video BandWidth GPS Global Positioning System Vert. Vertical Hori. Horizontal WLAN Wireless LAN Test Report No. 15377688H-B-R1 Page 4 of 36 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 CONTENTS PAGE SECTION 1: Customer Information ......................................................................................... 5 SECTION 2: Equipment Under Test (EUT) ...................................................…

Text truncated - open the document above for the full version.

This document was generated on 02/28/2018 PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION Part Number: 1461530100 Status: Active Overview:Antennas Description:2.4GHz / 5GHz Wi-Fi Stand Alone Balance Antenna with MHF Connector, 9.00mm Width, Cable Length 100.00mm Documents: 3D ModelPackaging Specification 1461530100-000 (PDF) Drawing (PDF)RoHS Certificate of Compliance (PDF) Product Specification PS-146153-100-001 (PDF)Product Literature (PDF) Application Specification AS-146153-100-001 (PDF) General Product FamilyAntennas Series146153 Component TypeStand Alone Antenna with Cable Mates WithMolex Receptacle 73412-0110 and other alternatives OverviewAntennas Product Literature Order No987651-6901 Product Name2.4/5GHz Balanced Flex Antenna ProtocolBLE, BT, Thread, Wi-Fi, Wireless Hart, Zigbee TypeWi-Fi Antenna UPC889056310017 Physical Cable Length100.00mm Length34.90mm Mounting StyleAdhesive Net Weight0.574/g Packaging TypePET Film PolarizationLinear Radiation PatternOmnidirectional Thickness0.10mm Width9.00mm Electrical Band#1 F_End (MHz)2483.5 Band#1 F_Start (MHz)2400 Band#2 F_End (MHz)5930 Band#2 F_Start (MHz)4900 Electrical ConnectivityCable Impedance 50Ω Number of Bands2 Peak Gain (dBi)3.0 @ 2.4G, 4.0 @ 5G Return Loss - S11 (dB)< -10 Total Efficiency>75% @ 2.4G, >75% @ 5G Material Info Reference - Drawing Numbers Application SpecificationAS-146153-100-001 Packaging Specification1461530100-000 Product SpecificationPS-146153-100-001 Sales DrawingSD-146153-050-001 Series image - Reference only EU ELV Not Relevant EU RoHSChina RoHS Compliant REACH SVHC Contained Per - ED/01/2018 (15 January 2018) 2,4-Di-tert-butyl-6-(5- chlorobenzotriazol-2- yl)p Halogen-Free Status Low-Halogen Need more information on product environmental compliance? Email [email protected] Please visit the Contact Us section for any non-product compliance questions. China ROHSGreen Image ELVNot Relevant RoHS PhthalatesNot Contained Search Parts in this Series 146153 Series This document was generated on 02/28/2018 PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Molex: 146153-0100

APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E FLEX CABLE BALANCE ANTENNA APPLICATION SPECIFICATION SHEET No. J1 EC No: 729862 1 of 31 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-1461530100 Liu Hai Andy Zhang Chris Zhong TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC TITLE WIFI 6E FLEX CABLE BALANCE ANTENNA TABLE OF CONTENTS 1.0 SCOPE 2.0 PRODUCT DESCRIPTION 3.0 APPLICABLE DOCUMENTS 4.0 ANTENNA PERFORMANCE 5.0 ASSEMBLY GUIDELINE 6.0 RF PERFORMANCE AS A FUNCTION OF IMPLEMENTATION 7.0 THE ANTENNA PERFORMANCE VARIATION WITH CABLE LENGTH 8.0 OTHER MOLEX ANTENNA PRODUCTS 9.0 CHANGE HISTORY APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E FLEX CABLE BALANCE ANTENNA APPLICATION SPECIFICATION SHEET No. J1 EC No: 729862 2 of 31 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-1461530100 Liu Hai Andy Zhang Chris Zhong TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC WIFI 6E FLEX CABLE BALANCE ANTENNA 1.0 SCOPE This specification describes the antenna application and surrounding. The information in this document is for reference and benchmark purposes only. The user is responsible for validating antenna rf performance based on the user’s actual implementation. Antenna illustrations in this document are generic representations. They are not intended to be an image of any antenna listed in the scope. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Product name: WIFI 6E flex cable balance antenna Series Number: 146153 2.2 DESCRIPTION Series 146153 is a balanced, dipole-type, high efficiency antenna for 2.4/5/6 GHz applications, including WiFi 6E, Bluetooth, Zigbee and others. This antenna is made from poly flexible material with small size 35*9*0.1mm and has double-sided adhesive tape for easy “peel and stick” mounting. This balanced antenna with ground plane independent design offers various cable length options for ease of integration into various devices. 2.3 PRODUCT STRUCTURE INFORMATION Please refer to PS-1461530100 for full information. ANTENNA 3D VIEW APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E FLEX CABLE BALANCE ANTENNA APPLICATION SPECIFICATION SHEET No. J1 EC No: 729862 3 of 31 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-1461530100 Liu Hai Andy Zhang Chris Zhong TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC 3.0 APPLICABLE DOCUMENTS DOCUMENT NUMBER DESCRIPTION Sale Drawing (SD) SD-1461530050 Mechanical Dimension of the product SD-1461531050 Product Specification (PS) PS-1461530100 Product Specification Packing Drawing (PK) PK-1461530100 Product packaging specifications 4.0 ANTENNA PERFORMANCE 4.1 RF TEST CONDITIONS All measurements are done of the antenna mounted on a PC/ABS material block of 1.5mm thickness with VNA Agilent E5071C and Over-The-Air (OTA) chamber. All measurements in this document are done with the part no.1461530100 with a cable length of 100mm. FIGURE4.1.1 ANTENNA LOADED WITH PC/ABS BLOCK OF 1.5 MM THICKNESS APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E FLEX CABLE BALANCE ANTENNA APPLICATION SPECIFICATION SHEET No. J1 EC No: 729862 4 of 31 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-1461530100 Liu Hai Andy Zhang Chris Zhong TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC FIGURE4.1.2 ANTENNA LOADED WITH PC/ABS BLOCK OF 1.5 MM THICKNESS WITH VNA DUT APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E FLEX CABLE BALANCE ANTENNA APPLICATION SPECIFICATION SHEET No. J1 EC No: 729862 5 of 31 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-1461530100 Liu Hai Andy Zhang Chris Zhong TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC FIGURE4.1.3 ANTENNA LOADED WITH PC/ABS BLOCK OF 1.5 MM THICKNESS WITH OTA CHAMBER DUT APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E FLEX CABLE BALANCE ANTENNA APPLICATION SPECIFICATION SHEET No. J1 EC No: 729862 6 of 31 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-1461530100 Liu Hai Andy Zhang Chris Zhong TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC 4.2 ANTENNA PERFORMANCE All measurements in this document are done with the part no.1461530100 with a cable length of 100mm DESCRIPTION EQUIPMENT REQUIREMENT Frequency Range VNA E5071C 2.4-2.5GHz 5.15-5.85GHz 5.925- 7.125GHz Return Loss VNA E5071C <- 10dB Peak Gain (Max) OTA Chamber 3.0dBi 4.0dBi 5.5dBi Average Total Efficiency OTA Chamber >75% >75% >70% Polarization OTA Chamber Linear Input Impedance VNA E5071C 50 ohms Note that the above antenna performance is measured with just the antenna mounted on a PC/ABS block to similar a free-space condition. When implement into the system, the frequency resonant might be off-tune due to the loading of surrounding components especially metal plane. This off-tune can be compensated through matching. Although module manufacturers specify a peak gain limit, it is based on free-space conditions. The peak gain will be degraded by 1 to 2dBi in the actual implementation as the radiation pattern will change due to the surround components. As such, during selection of antenna, you can select one with high peak gain to compensate for the loss. Molex can offer assistant to choose the best location and best tuning in-order to meet this peak gain requirement. APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E FLEX CABLE BALANCE ANTENNA APPLICATION SPECIFICATION SHEET No. J1 EC No: 729862 7 of 31 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-1461530100 Liu Hai Andy Zhang Chris Zhong TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC 4.3 RETURN LOSS PLOT All measurements in this document are done with a cable length of 100mm. FIGURE 4.3.1 RETURN LOSS OF ANTENNA AT 2.4GHZ BAND IN FREE SPACE FIGURE 4.3.2 RET…

Text truncated - open the document above for the full version.

PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E CABLE FLEX BALANCE ANTENNA PRODUCT SPECIFICATION SHEET No. F3 EC No: 729862 1 of 11 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-1461530100 Kang Cheng Ma Horace Benson Hung TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC TITLE WIFI 6E FLEX CABLE BALANCE ANTENNA TABLE OF CONTENTS 1. SCOPE 2. PRODUCT DESCRIPTION 3. GENERAL SPECIFICATION 4. PRODUCT STRUCTURE INFORMATION 5. APPLICABLE DOCUMENTS 6. ANTENNA SPECIFICATION 7. MECHANICAL SPECIFICATION 8. ENVIRONMENTAL SPECIFICATION 9. PACKING 10. OTHER MOLEX ANTENNA PRODUCTS 11. CHANGE HISTORY PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E CABLE FLEX BALANCE ANTENNA PRODUCT SPECIFICATION SHEET No. F3 EC No: 729862 2 of 11 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-1461530100 Kang Cheng Ma Horace Benson Hung TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC WIFI 6E FLEX CABLE BALANCE ANTENNA 1.0 SCOPE This Product Specification covers the mechanical, electrical and environmental performances specification for WiFi 6E flex cable balance antenna. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Product name: WiFi 6E flex cable balance antenna Series Number: 146153 Series 2.2 DESCRIPTION Series 146153 is a balanced, dipole-type, high efficiency antenna for 2.4/5/6 GHz applications, including WiFi 6E, Bluetooth, Zigbee and others. This antenna is made from poly flexible material with small size 35*9*0.1mm and has double-sided adhesive tape for easy “peel and stick” mounting. This balanced antenna with ground plane independent design offers various cable length options for ease of integration into various devices. 2.3 FEATURES  2400~2500MHz,5150~5850MHz,5925~7125MHz, linear polarization  Ground plane independent, balanced dual band antenna  Flex size 35 x 9 x 0.1mm (not contain solder area)  MHF & U.FL compatible connector (Such as MHF1/MHF4)  Cable Ø1.13mm, 6 standard length options (50/100/150/200/250/300mm)  Cable and connector can be customized Molex 146153 SERIES 3D VIEW PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: WIFI 6E CABLE FLEX BALANCE ANTENNA PRODUCT SPECIFICATION SHEET No. F3 EC No: 729862 3 of 11 DATE: 2022/11/25 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-1461530100 Kang Cheng Ma Horace Benson Hung TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC 3.0 GENERAL SPECIFICATION Product name WIFI 6E FLEX CABLE BALANCE ANTENNA Part number 146153 Frequency 2.4GHz-2.5GHz 5.15GHz- 5.85GHz 5.925GHz- 7.125GHz Polarization Linear Operating with matching -40°C to 85°C Storage with matching -40°C to 85°C RF Power 2 Watts Impedance with matching 50 Ohms Antenna type Flex Connector type 146153 0XXX 146153 1XXX Compatible MHF1 Compatible MHF4L User Implementation type Adhesive 3M9077 Cable diameter Ø1.13mm Cable length 50 mm (P/N for 1461530050/1461531050) 100 mm (P/N for 1461530100/1461531100) 150 mm (P/N for 1461530150/1461531150) 200 mm (P/N for 1461530200/1461531200) 250 m…

Text truncated - open the document above for the full version.