2BH7T-ABICA0122MMAirBell Pro

FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

IPRO CREATIVE CO.,LTD Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 8/28/2024 U.S. Agent Designation IPRO CREATIVE CO.,LTD acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BH7T-ABICA0122MM): Name and company of U.S. agent: UUX GROUP INC Physical U.S. address of agent: 36 South 18th Avenue, Suite A Brighton, CO USA 80601 FRN of U.S. agent: 0033701590 Email address of U.S. agent: [email protected] UUX GROUP INC acknowledges their obligation to accept service of process on behalf of IPRO CREATIVE CO.,LTD. IPRO CREATIVE CO.,LTD with the FRN 0035788835 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Andy Sun Manager IPRO CREATIVE CO.,LTD Signature Jack Fu Manager UUX GROUP INC 48_[model] US_Agent_2.911(d)(7)-U, V05

Page 1 of 3 FCC ID: 2BH7T-ABICA0122MM Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. External Photos Photo 1 Photo 2 Page 2 of 3 FCC ID: 2BH7T-ABICA0122MM Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 Page 3 of 3 FCC ID: 2BH7T-ABICA0122MM Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 ------End------

Label FCC ID: 2BH7T-ABICA0122MM

Page 1 of 4 FCC ID: 2BH7T-ABICA0122MM Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Internal Photos Photo 1 Photo 2 Page 2 of 4 FCC ID: 2BH7T-ABICA0122MM Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 Page 3 of 4 FCC ID: 2BH7T-ABICA0122MM Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 Page 4 of 4 FCC ID: 2BH7T-ABICA0122MM Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 7 Photo 8 ------End------ Antenna

RF Exposure evaluation FCC ID: 2BH7T-ABICA0122MM 1.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1093 RF exposure requirement KDB447498 v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 1.2. Requirement According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 1.3. Manufacturing tolerance BLE Frequency (MHz) GFSK(1M) 2402 2440 2480 Target (dBm) -4 -4 -5 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) GFSK(2M) 2402 2440 2480 Target (dBm) -4 -4 -5 Tolerance ± (dB) 1.0 1.0 1.0 Page 2 of 2 2 . E v a l u a t i o n R e s u l t Evaluation Results Band/Mode f (GHz) Antenna Distance (mm) Max.RF output power (including tune-up tolerance) SAR Test Exclusion Threshold SAR Test Exclusion dBm mW BLE 2.5 5 -3 0.5 0.16<3 Yes 3 . C o n c l u s i o n The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06 .....................End of Report.........................

Page 1 of 35 Report No.: AiTDG-240806012W1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. TEST REPORT Client Information: Applicant: IPRO CREATIVE CO.,LTD Applicant add.: 1816 Hualian Building Dongdu Road Ningbo China Manufacturer: TeamNobile GmbH Manufacturer add.: Henriettenplatz 8 / 4,1150 Wien,Austria Product Information: Product Name: AirBell Pro Model No.: AB_IC_A_01_22mm Brand Name: N/A FCC ID: 2BH7T-ABICA0122MM Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Prepared By: Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang,Dongguan, Guangdong, China Tel.: +86-769-8202 0499 Fax.: +86-769-8202 0495 Date of Receipt: Aug. 06, 2024 Date of Test: Aug. 06, 2024~Aug. 07, 2024 Date of Issue: Aug. 08, 2024 Test Result: Pass This device described above has been tested by Dongguan Yaxu (AiT) Technology Limited and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Note: This report shall not be reproduced except in full, without the written approval of Dongguan Yaxu (AiT) Technology Limited, this document may be altered or revised by Dongguan Yaxu (AiT) Technology Limited, personal only, and shall be noted in the revision of the document. This test report must not be used by the client to claim product endorsement. Reviewed by: Approved by: Emiya Lin Simba Huang Page 2 of 35 Report No.: AiTDG-240806012W1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. 1 Contents Page COVER PAGE 1 CONTENTS .................................................................................................................................................................... 2 2 TEST SUMMARY .......................................................................................................................................................... 4 2.1 Statement of the Measurement Uncertainty ................................................................................ 4 2.2 Measurement Uncertainty ........................................................................................................... 4 3 TEST FACILITY ............................................................................................................................................................. 5 3.1 Deviation from standard .............................................................................................................. 5 3.2 Abnormalities from standard conditions ...................................................................................... 5 3.3 Test Location ............................................................................................................................... 5 4 GENERAL INFORMATION ......................................................................................................................................... 6 4.1 Test frequencies .......................................................................................................................... 7 4.2 EUT Peripheral List ..................................................................................................................... 7 4.3 Test Peripheral List ...................................................................................................................... 7 4.4 TEST METHODOLOGY .............................................................................................................. 8 4.5 Description of Test Modes ........................................................................................................... 9 5 EQUIPMENT USED DURING TEST ........................................................................................................................ 10 6 TEST RESULTS AND MEASUREMENT DATA .................................................................................................... 12 6.1 Antenna requirement ................................................................................................................. 12 6.2 On Time and Duty Cycle ........................................................................................................... 13 6.3 Maximum Conducted Output Peak Power Measurement ......................................................... 14 6.4 6 dB Spectrum Bandwidth Measurement .................................................................................. 16 6.5 Power Spectral Density ............................................................................................................. 17 6.6 Conducted Spurious Emissions and Band Edges Test ............................................................. 19 6.7 Restrict-band Band-edge Measurements ................................................................................. 21 6.8 Radiated Emissions Measurement ........................................................................................... 24 6.9 Conducted Emissions ................................................................................................................ 34 7 TEST SETUP PHOTOGRAPHS OF EUT ................................................................................................................ 35 8 EXTERNAL PHOTOGRAPHS OF EUT ................................................................................................................... 35 9 INTERNAL PHOTOGRAPHS OF EUT .................................................................................................................... 35 Page 3 of 35 Report No.: AiTDG-240806012W1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Aug. 08, 2024 Valid Initi…

Text truncated - open the document above for the full version.

TestreportofonboardPIFAantennain2.4G-2.48Gband SPECIFICATIONS Frequency（MHz）2400-2480 PeakGain（dBi） AverageGain（dBi 2.20 ）＞-4 VSWR＜3.2 Impedance（Ω）50Ω AntennaTypePlannarInvertedFAntennaonboard PolarizationLinear Testenvironment:ChinaScienceandtechnologydarkroomtestsystem Z X Y Antennaphysicalandphysicaldimensions AntennapassiveS-parameters: Standingwaveratio(VSWR),ReturnLoss(ReturnLoss)andSmith'scircle chart Antennaefficiencyandgain Frequency（MHz）Gain（dBi）Effciency（%）AverageGain（dBi）Efficiency（dB） 24001.43359.329%-2.717-2.267 24100.92751.861%-3.416-2.852 24200.82952.112%-3.166-2.831 24300.88149.299%-3.258-3.072 24401.19250.672%-3.144-2.952 24501.68853.067%-2.735-2.752 24602.19459.423%-2.276-2.260 24702.11856.680%-2.438-2.466 248061.7272.200%-2.112-2.095 Average1.52954.908%-2.806-2.616 Peak61.7272.200%-2.112-2.095 Antenna2440MHz2D-ThetaPattern Antenna2440MHz2D-PhiPattern Antenna2440MHz3D-HorizontalPattern Antenna2440MHz3D-VerticalPattern Antenna2440MHz3D-TotalPattern

Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 1 of 35 Appendix B RF Test Data for BT (BLE) (Conducted Measurement) Product Name: AirBell Pro Trade Mark: N/A Test Model: AB_IC_A_01_22mm Environmental Conditions Temperature: 25.3 C Relative Humidity: 52.4% ATM Pressure: 100.0 kPa Test Engineer: Emiya lin Supervised by: Simba Haung Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 2 of 35 Contents Page COVER PAGE 1 Duty Cycle....................................................................................................................................................................................... 3 1.1 Test Result .......................................................................................................................................................................... 3 1.2 Test Graphs ......................................................................................................................................................................... 4 2 Maximum Conducted Output Power ................................................................................................................................................ 7 2.1 Test Result .......................................................................................................................................................................... 7 2.2 Test Graphs ......................................................................................................................................................................... 8 3 -6dB Bandwidth ............................................................................................................................................................................. 11 3.1 Test Result ........................................................................................................................................................................ 11 3.2 Test Graphs ....................................................................................................................................................................... 12 4 Maximum Power Spectral Density Level ........................................................................................................................................ 15 4.1 Test Result ........................................................................................................................................................................ 15 4.2 Test Graphs ....................................................................................................................................................................... 16 5 Band Edge .................................................................................................................................................................................... 19 5.1 Test Result ........................................................................................................................................................................ 19 5.2 Test Graphs ....................................................................................................................................................................... 20 6 Conducted RF Spurious Emission ................................................................................................................................................. 24 6.1 Test Result ........................................................................................................................................................................ 24 6.2 Test Graphs ....................................................................................................................................................................... 25 7 Restrict Band ................................................................................................................................................................................ 31 7.1 Test Result ........................................................................................................................................................................ 31 7.2 Test Graphs ....................................................................................................................................................................... 32 Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 3 of 35 1 Duty Cycle 1.1 Test Result Mode Frequency (MHz) Duty Cycle (%) Correction Factor 1/T (kHz) BLE 1M 2402 64.79 1.88 2.5 BLE 1M 2440 64.79 1.88 2.5 BLE 1M 2480 64.79 1.88 2.5 BLE 2M 2402 35.21 4.53 4.76 BLE 2M 2440 35.21 4.53 4.76 BLE 2M 2480 35.2 4.54 4.76 Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 4 of 35 1.2 Test Graphs Test Graphs BLE 1M 2402MHz BLE 1M 2440MHz Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 5 of 35 BLE 1M 2480MHz BLE 2M 2402MHz Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 6 of 35 BLE 2M 2440MHz BLE 2M 2480MHz Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 7 of 35 2 Maximum Conducted Output Power 2.1 Test Result Mode Frequency (MHz) Conducted Power (dBm) Limit (dBm) Verdict BLE 1M 2402 -3.99 30 Pass BLE 1M 2440 -4.44 30 Pass BLE 1M 2480 -5.09 30 Pass BLE 2M 2402 -4.02 30 Pass BLE 2M 2440 -4.45 30 Pass BLE 2M 2480 -5.04 30 Pass Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 8 of 35 2.2 Test Graphs Test Graphs BLE 1M 2402MHz BLE 1M 2440MHz Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 9 of 35 BLE 1M 2480MHz BLE 2M 2402MHz Dongguan Yaxu(AiT) Technology Limited Report No.:…

Text truncated - open the document above for the full version.

Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 14 of 35 BLE 2M 2440MHz BLE 2M 2480MHz Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 15 of 35 4 Maximum Power Spectral Density Level 4.1 Test Result Mode Frequency (MHz) Conducted PSD (dBm/3-100kHz) Limit (dBm/3kHz) Verdict BLE 1M 2402 -19.3 ≤8 Pass BLE 1M 2440 -19.84 ≤8 Pass BLE 1M 2480 -20.48 ≤8 Pass BLE 2M 2402 -22.07 ≤8 Pass BLE 2M 2440 -22.47 ≤8 Pass BLE 2M 2480 -23.16 ≤8 Pass Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 16 of 35 4.2 Test Graphs Test Graphs BLE 1M 2402MHz BLE 1M 2440MHz Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 17 of 35 BLE 1M 2480MHz BLE 2M 2402MHz Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 18 of 35 BLE 2M 2440MHz BLE 2M 2480MHz Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 19 of 35 5 Band Edge 5.1 Test Result Mode Frequency (MHz) Max Value (dBc) Limit (dBc) Verdict BLE 1M 2402 -42.99 -20 Pass BLE 1M 2480 -47.92 -20 Pass BLE 2M 2402 -47.1 -20 Pass BLE 2M 2480 -48.02 -20 Pass Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 20 of 35 5.2 Test Graphs Test Graphs BLE 1M 2402MHz Ref BLE 1M 2402MHz Emission Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 21 of 35 BLE 1M 2480MHz Ref BLE 1M 2480MHz Emission Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 22 of 35 BLE 2M 2402MHz Ref BLE 2M 2402MHz Emission Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 23 of 35 BLE 2M 2480MHz Ref BLE 2M 2480MHz Emission Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 24 of 35 6 Conducted RF Spurious Emission 6.1 Test Result Mode Frequency (MHz) Max Value (dBc) Limit (dBc) Verdict BLE 1M 2402 -39.31 -20 Pass BLE 1M 2440 -39.06 -20 Pass BLE 1M 2480 -37.98 -20 Pass BLE 2M 2402 -39.91 -20 Pass BLE 2M 2440 -38.8 -20 Pass BLE 2M 2480 -38.32 -20 Pass Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 25 of 35 6.2 Test Graphs Test Graphs BLE 1M 2402MHz Ref BLE 1M 2402MHz Emission Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 26 of 35 BLE 1M 2440MHz Ref BLE 1M 2440MHz Emission

Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 27 of 35 BLE 1M 2480MHz Ref BLE 1M 2480MHz Emission Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 28 of 35 BLE 2M 2402MHz Ref BLE 2M 2402MHz Emission Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 29 of 35 BLE 2M 2440MHz Ref BLE 2M 2440MHz Emission Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 30 of 35 BLE 2M 2480MHz Ref BLE 2M 2480MHz Emission Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 31 of 35 7 Restrict Band 7.1 Test Result Mode Frequency (MHz) Spur Freq (MHz) Power (dBm) Gain (dBi) Duty Factor E (dBuV/m) Detector Limit (dBuV/m) Verdict BLE 1M 2402 2310 -48.27 2.2 - 49.16 Peak 74 Pass BLE 1M 2402 2310 -56.03 2.2 1.88 43.28 Average 54 Pass BLE 1M 2402 2353.776 -42.96 2.2 - 54.47 Peak 74 Pass BLE 1M 2402 2337.936 -53.9 2.2 1.88 45.41 Average 54 Pass BLE 1M 2402 2390 -50.67 2.2 - 46.76 Peak 74 Pass BLE 1M 2402 2390 -56.56 2.2 1.88 42.75 Average 54 Pass BLE 1M 2480 2483.5 -48.64 2.2 - 48.79 Peak 74 Pass BLE 1M 2480 2483.5 -56.82 2.2 1.88 42.49 Average 54 Pass BLE 1M 2480 2485.096 -47.37 2.2 - 50.06 Peak 74 Pass BLE 1M 2480 2488.072 -54.16 2.2 1.88 45.15 Average 54 Pass BLE 1M 2480 2500 -49.2 2.2 - 48.23 Peak 74 Pass BLE 1M 2480 2500 -56.5 2.2 1.88 42.81 Average 54 Pass BLE 2M 2402 2310 -49.46 2.2 - 47.97 Peak 74 Pass BLE 2M 2402 2310 -56.86 2.2 4.53 45.1 Average 54 Pass BLE 2M 2402 2353.488 -43.63 2.2 - 53.8 Peak 74 Pass BLE 2M 2402 2339.376 -53.91 2.2 4.53 48.05 Average 54 Pass BLE 2M 2402 2390 -49.85 2.2 - 47.58 Peak 74 Pass BLE 2M 2402 2390 -57.04 2.2 4.53 44.92 Average 54 Pass BLE 2M 2480 2483.5 -48.62 2.2 - 48.81 Peak 74 Pass BLE 2M 2480 2483.5 -56.16 2.2 4.54 45.81 Average 54 Pass BLE 2M 2480 2488.6 -47.66 2.2 - 49.77 Peak 74 Pass BLE 2M 2480 2488.216 -55.32 2.2 4.54 46.65 Average 54 Pass BLE 2M 2480 2500 -50.33 2.2 - 47.1 Peak 74 Pass BLE 2M 2480 2500 -56.66 2.2 4.54 45.31 Average 54 Pass Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 32 of 35 7.2 Test Graphs Test Graphs BLE 1M 2402MHz Peak BLE 1M 2402MHz Average Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 33 of 35 BLE 1M 2480MHz Peak BLE 1M 2480MHz Average Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 34 of 35 BLE 2M 2402MHz Peak BLE 2M 2402MHz Average Dongguan Yaxu(AiT) Technology Limited Report No.: AiTDG-240806012W1 FCC ID: 2BH7T-ABICA0122MM Page 35 of 35 BLE 2M 2480MHz Peak BLE 2M 2480MHz Average ---The End---

Page 1 of 1 FCC ID: 2BH7T-ABICA0122MM Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Test Setup Photo Radiated Emission ------End------