2BH88AIPINONEAiPIN

Rev 1/26/2023 [THINKAR PTE. LTD.] [346C KING GEORGE'S AVENUE KING GEORGE'S BUILDING] [SINGAPORE, 208577] [Singapore] Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 4/29/2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BH88AIPINONE [THINKAR PTE. LTD.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [THINKAR PTE. LTD.] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti- virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) Joe Ye Rev 1/26/2023 [THINKAR PTE. LTD.] [346C KING GEORGE'S AVENUE KING GEORGE'S BUILDING] [SINGAPORE, 208577] [Singapore] Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 4/29/2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BH88AIPINONE [THINKAR PTE. LTD.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) Joe Ye

[THINKAR PTE. LTD.] [346C KING GEORGE'S AVENUE KING GEORGE'S BUILDING] [SINGAPORE, 208577] [Singapore] FRN: [0035797455] Date: [2026/4/29] Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: [2BH88AIPINONE] US Agent – Attestation Statement / Part 2.911(d)(7) [THINKAR PTE. LTD.] certifies, that as of 2026/04/17, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: [2BH88AIPINONE]. [THINKAR PTE. LTD.], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [THINKAR PTE. LTD] for FCC ID: [2BH88AIPINONE]. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: THINKAR PTE. LTD. Designated Agent: FCC US Agent, LLC Company Representative: Joe Ye Designated Agent Representative: Tim Payne Signature: Signature:

[THINKAR PTE. LTD.] [346C KING GEORGE'S AVENUE KING GEORGE'S BUILDING] [SINGAPORE, 208577] [Singapore] Authority to Act as Agent Date: 2026/4/29 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA To Whom It May Concern: I appoint TUV Taiwan / Jason Chang to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with THINKAR PTE. LTD./ 346C KING GEORGE'S AVENUE KING GEORGE'S BUILDING. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: 2026/4/29 Agreement is valid for 12 months from the above date. By: Joe Ye (Signature) (Print name) CEO +886935650621 (Title) (Telephone) THINKAR PTE. LTD. (Company Name)

MS-0044715 Page 1 of 1 Revision 1 [THINKAR PTE. LTD.] [346C KING GEORGE'S AVENUE KING GEORGE'S BUILDING] [SINGAPORE, 208577] [Singapore] Date: 2026/4/29 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: 2BH88AIPINONE Pursuant to FCC 47 CFR 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Permanent Permanent Test Setup*** Permanent Permanent User’s Manual*** Short Term Permanent Part List THINKAR PTE. LTD. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: Joe Ye / CEO (Signature) (Print name/Title) Tel: +886935650621 Email: [email protected]

( & L K Z @ P I ( * ' $ ) - $ ( . ) = = ) , ' 4 F g " i ^ 9 V ? e ( ' ' ' < W U " 9 V ? + 2 G E X k f * ' ' < F g ^ \ Y a 1 ] * ' M R H 3 9 1 C Q \ B L K Z A h D c J _ + 2 G E X k f * ' ' < F g ^ \ Y a 1 ] * ' M R H 3 9 1 C Q \ B L K Z A h D c J _ K Z i ^ K Z d ^ K Z W U L Z i ^ L Z d ^ L Z W U T b S ` 1 7 ' ( " 2 5 % : ' . - 8 # W a N j [ O Z ; 8 6 7 ; 9 ) / ( ) 0 & , > ( ) . > ( ( ( 0 (-' ( ) , (-- ( - 0 & , )('&, ( / ( (-0&, (.'&,>( ( ) * & , > ( ) + & , > ( (-+&,>( M 7 Q ? F 8 1 6 O P @ T L 4 H 2 R > K R 3 C < = 0 B . S • x œ ƒ “ y U V e _ Z d › ‡ K p ’ M X R J W O H  r G q ” G t ‹ G W P V Š j U  o N T J S L Q M J H W A R N I N G : T h i s p r o d u c t c o n t a i n s a l i t h i u m b a t t e r y . D o n o t p u n c t u r e , d i s a s s e m b l e , h e a t , o r d i s p o s e o f i n f i r e . z y w œ / > 7 4 6 { Œ œ / 7 % & ˜ m ‚ € œ 0 @ F < E C C E = " * $ % › ‡ ~ š œ & ) % A / = } † o s œ 2 1 " * : " " " " " " % $ * / P r o d u c t n a m e : A i P I N M o d e l N o . : A P 0 1 B l u e t o o t h v e r s i o n : V 5 . 0 B a t t e r y c a p a c i t y : 1 4 0 m A h R a t e d i n p u t : D C 5 V 0 . 5 A F 8 5 G Q $ , ) ' ( F 8 9 J Q $ ) U V I E D ? Q * X " U P @ ; N Q V W U - $ + / P P : # P A Q & % X * U " X $ 7 1 1 6 0 8 3 9 0 1 1 5 4 S e r i a l N o . M A C — o – | n œ 9 = > B ? / 8 " 5 ; D ; B … € l Ž I & % * # , * . % „ k ™ ‰ u ˆ  h i  , Œ & v „ k c g a \ ` Y  ‘ [ b Y ] ^ f g & & 3 D e s i g n e d b y M a d e i n C h i n a F C C I D : 2 B H 8 8 A I P I N O N E % ' % # ' + % % ( - W e a r a b l e A I R e c o r d e r

Prüfbericht - Produkte Test Report - Products Prü fbericht-Nr.: Test report no.: CN267Q8Q 001 Auftrags-Nr.: Order no.: 48302781 Seite 1 von 40 Page 1 of 40 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2026-03-11 Auftraggeber: Client: THINKAR PTE. LTD. 346C KING GEORGE'S AVENUE KING GEORGE'S BUILDING SINGAPORE Prü fgegenstand: Test item: AiPIN Bezeichnung / Typ-Nr.: Identification / Type no.: AP01 Auftrags-Inhalt: Order content: Test Report for FCC SAR Prü fgrundlage: Test specification: FCC 47 CFR §2.1093 IEEE Std 1528-2013 IEC/IEEE 62209-1528:2020 Published RF exposure KDB procedures Wareneingangsdatum: Date of sample receipt: 2026-01-30 Prü fmuster-Nr.: Test sample no: A004203544-012 Prü fzeitraum: Testing period: 2026-03-26 - 2026-03-30 Ort der Prü fung: Place of testing: TÜ V Rheinland Taiwan Ltd. New Taipei Branch Prü flaboratorium: Testing laboratory: TÜ V Rheinland Taiwan Ltd. Taipei Testing Laboratories Prü fergebnis*: Test result*: Pass ü berprü ft von: compiled by: Ryan Chen genehmigt von: authorized by: Morrison Huang Datum: Date: 2026-04-30 Ausstellungsdatum: Issue date: 2026-04-30 Stellung / Position: Senior Project Manager Stellung / Position: Project Engineer Sonstiges / Other: Zustand des Prü fgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prü fbericht bezieht sich nur auf das o.g. Prü fmuster und darf ohne Genehmigung der Prü fstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prü fzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland Taiwan Ltd. 11F., No. 758, Sec. 4, Bade Rd., Taipei 105, Taiwan, R.O.C. Mail: [email protected] ∙ Web: www.tuv.com V101023GCNSR Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN267Q8Q 001 Seite 2 von 40 Page 2 of 40 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜ V Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Ü berprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜ V Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical measurem…

Text truncated - open the document above for the full version.

Appendix C - Calibration Certificate

Test Laboratory: TUV Inc. Date: 2026/3/27 25_WLAN5GHz_802.11a 6Mbps_Front Face_5mm_Ch64 DUT: AI PIN Communication System: WLAN; Frequency: 5320 MHz; Duty Cycle: 1:1.057 Medium: HSL5G_260327 Medium parameters used: f = 5320 MHz; σ = 4.645 S/m; ε r = 35.664; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：22.5 °C DASY Configuration: Electronics: DAE4 Sn855; Calibrated: 2025/4/23 Probe: EX3DV4 - SN7400; ConvF(5.5, 4.91, 5.68) @ 5320 MHz; Calibrated: 2025/5/21 Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -19.0, 23.0 Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1153 DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Area Scan (7x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 1.50 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 21.21 V/m; Power Drift = 0.16 dB Peak SAR (extrapolated) = 5.22 W/kg SAR(1 g) = 1.31 W/kg; SAR(10 g) = 0.429 W/kg Maximum value of SAR (measured) = 3.01 W/kg 0 dB = 3.01 W/kg = 4.79 dBW/kg Appendix B - SAR Measurement Test Laboratory: TUV Inc. Date: 2026/3/27 37_WLAN5GHz_802.11a 6Mbps_Left Side_5mm_Ch100 DUT: AI PIN Communication System: WLAN; Frequency: 5500 MHz; Duty Cycle: 1:1.057 Medium: HSL5G_260327 Medium parameters used: f = 5500 MHz; σ = 4.839 S/m; ε r = 35.366; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：22.5 °C DASY Configuration: Electronics: DAE4 Sn855; Calibrated: 2025/4/23 Probe: EX3DV4 - SN7400; ConvF(5.12, 4.57, 5.29) @ 5500 MHz; Calibrated: 2025/5/21 Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -19.0, 23.0 Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1153 DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Area Scan (7x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.541 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 16.57 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 2.48 W/kg SAR(1 g) = 0.506 W/kg; SAR(10 g) = 0.163 W/kg Maximum value of SAR (measured) = 1.29 W/kg 0 dB = 1.29 W/kg = 1.11 dBW/kg Test Laboratory: TUV Inc. Date: 2026/3/27 35_WLAN5GHz_802.11a 6Mbps_Left Side_5mm_Ch165 DUT: AI PIN Communication System: WLAN; Frequency: 5825 MHz; Duty Cycle: 1:1.057 Medium: HSL5G_260327 Medium parameters used: f = 5825 MHz; σ = 5.212 S/m; ε r = 34.796; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：22.5 °C DASY Configuration: Electronics: DAE4 Sn855; Calibrated: 2025/4/23 Probe: EX3DV4 - SN7400; ConvF(5.21, 4.66, 5.39) @ 5825 MHz; Calibrated: 2025/5/21 Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -19.0, 23.0 Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1153 DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Area Scan (7x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.864 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 20.64 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 4.69 W/kg SAR(1 g) = 0.862 W/kg; SAR(10 g) = 0.286 W/kg Maximum value of SAR (measured) = 2.25 W/kg 0 dB = 2.25 W/kg = 3.52 dBW/kg Test Laboratory: TUV Inc. Date: 2026/3/26 16_Bluetooth_LE_2Mbps_Left Side_5mm_Ch0 DUT: AI PIN Communication System: Bluetooth; Frequency: 2402 MHz; Duty Cycle: 1:1.162 Medium: HSL2450_260326 Medium parameters used: f = 2402 MHz; σ = 1.791 S/m; ε r = 40.243; ρ = 1000 kg/m 3 Ambient Temperature：22.9 °C; Liquid Temperature：22.1 °C DASY Configuration: Electronics: DAE4 Sn855; Calibrated: 2025/4/23 Probe: EX3DV4 - SN7400; ConvF(7.07, 6.32, 7.31) @ 2402 MHz; Calibrated: 2025/5/21 Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -19.0, 23.0 Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1153 DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Area Scan (7x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.216 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 11.82 V/m; Power Drift = -0.19 dB Peak SAR (extrapolated) = 0.297 W/kg SAR(1 g) = 0.110 W/kg; SAR(10 g) = 0.040 W/kg Maximum value of SAR (measured) = 0.214 W/kg 0 dB = 0.214 W/kg = -6.70 dBW/kg Test Laboratory: TUV Inc. Date: 2026/3/30 58_WLAN5GHz_802.11a 6Mbps_Rear Face_0mm_Ch60 DUT: AI PIN Communication System: WLAN; Frequency: 5300 MHz; Duty Cycle: 1:1.057 Medium: HSL5G_260330 Medium parameters used: f = 5300 MHz; σ = 4.618 S/m; ε r = 35.332; ρ = 1000 kg/m 3 Ambient Temperature：23.5 °C; Liquid Temperature：22.4 °C DASY Configuration: Electronics: DAE4 Sn855; Calibrated: 2025/4/23 Probe: EX3DV4 - SN7400; ConvF(5.5, 4.91, 5.68) @ 5300 MHz; Calibrated: 2025/5/21 Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -19.0, 23.0 Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1153 DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Area Scan (7x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.954 W/kg Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 20.54 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 2.98 W/kg SAR(1 g) = 0.767 W/kg; SAR(10 g) = 0.262 W/kg Maximum value of SAR (measured) = 1.75 W/kg 0 dB = 1.75 W/kg = 2.43 dBW/kg Test Laboratory: TUV Inc. Date: 2026/3/30 60_WLAN5GHz_802.11a 6Mbps_Rear Face_0mm_Ch100 DUT: AI PIN Communication System: WLAN; Frequency: 5500 MHz; Duty Cycle: 1:1.057 Medium: HSL5G_260330 Medium parameters used: f = 5500 MHz; σ = 4.839 S/m; ε r = 34.971; ρ = 1000 kg/m 3 Ambient Temperature：23.5 °C; Liquid Temperature：22.4 °C DASY Configuration: Electronics: DAE4 Sn855; Calibrated: 2025/4/23 Probe: EX3DV4 - SN7400; ConvF(5.12, 4.57, 5.29) @ 5500 MHz; Calibrated: 2025/5/21 Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -19.0, 23.0 Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1153 DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Area Scan (7x9x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.445 W/k…

Text truncated - open the document above for the full version.

Test Laboratory: TUV Inc. Date: 2026/3/26 System Check_HSL2450MHz DUT: D2450V2 - SN735 Communication System: CW; Frequency: 2450 MHz; Duty Cycle: 1:1 Medium: HSL2450_260326 Medium parameters used: f = 2450 MHz; σ = 1.836 S/m; ε r = 40.113; ρ = 1000 kg/m 3 Ambient Temperature：22.9 °C; Liquid Temperature：22.1 °C DASY Configuration: Electronics: DAE4 Sn855; Calibrated: 2025/4/23 Probe: EX3DV4 - SN7400; ConvF(7.07, 6.32, 7.31) @ 2450 MHz; Calibrated: 2025/5/21 Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -9.0, 31.0 Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1153 DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Pin=250mW/Area Scan (9x9x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 21.8 W/kg Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 119.2 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 26.0 W/kg SAR(1 g) = 13.4 W/kg; SAR(10 g) = 6.3 W/kg Maximum value of SAR (measured) = 21.8 W/kg 0 dB = 21.8 W/kg = 13.38 dBW/kg Appendix A - System Verification Test Laboratory: TUV Inc. Date: 2026/3/27 System Check_HSL5250MHz DUT: D5GHzV2 - SN1203 Communication System: CW; Frequency: 5250 MHz; Duty Cycle: 1:1 Medium: HSL5G_260327 Medium parameters used: f = 5250 MHz; σ = 4.564 S/m; ε r = 35.802; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：22.5 °C DASY Configuration: Electronics: DAE4 Sn855; Calibrated: 2025/4/23 Probe: EX3DV4 - SN7400; ConvF(5.5, 4.91, 5.68) @ 5250 MHz; Calibrated: 2025/5/21 Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -9.0, 23.0 Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1153 DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Pin=100mW/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 11.9 W/kg Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 70.87 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 35.2 W/kg SAR(1 g) = 7.82 W/kg; SAR(10 g) = 2.21 W/kg Maximum value of SAR (measured) = 20.5 W/kg 0 dB = 20.5 W/kg = 13.12 dBW/kg Test Laboratory: TUV Inc. Date: 2026/3/30 System Check_HSL5250MHz DUT: D5GHzV2 - SN1203 Communication System: CW; Frequency: 5250 MHz; Duty Cycle: 1:1 Medium: HSL5G_260330 Medium parameters used: f = 5250 MHz; σ = 4.561 S/m; ε r = 35.402; ρ = 1000 kg/m 3 Ambient Temperature：23.5 °C; Liquid Temperature：22.4 °C DASY Configuration: Electronics: DAE4 Sn855; Calibrated: 2025/4/23 Probe: EX3DV4 - SN7400; ConvF(5.5, 4.91, 5.68) @ 5250 MHz; Calibrated: 2025/5/21 Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -9.0, 23.0 Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1153 DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Pin=100mW/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 12.3 W/kg Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 75.54 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 36.2 W/kg SAR(1 g) = 8.01 W/kg; SAR(10 g) = 2.26 W/kg Maximum value of SAR (measured) = 21.0 W/kg 0 dB = 21.0 W/kg = 13.22 dBW/kg Test Laboratory: TUV Inc. Date: 2026/3/27 System Check_HSL5600MHz DUT: D5GHzV2 - SN1203 Communication System: CW; Frequency: 5600 MHz; Duty Cycle: 1:1 Medium: HSL5G_260327 Medium parameters used: f = 5600 MHz; σ = 4.953 S/m; ε r = 35.196; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：22.5 °C DASY Configuration: Electronics: DAE4 Sn855; Calibrated: 2025/4/23 Probe: EX3DV4 - SN7400; ConvF(5.12, 4.57, 5.29) @ 5600 MHz; Calibrated: 2025/5/21 Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -9.0, 23.0 Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1153 DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Pin=100mW/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 12.9 W/kg Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 69.84 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 40.8 W/kg SAR(1 g) = 8.12 W/kg; SAR(10 g) = 2.28 W/kg Maximum value of SAR (measured) = 21.7 W/kg 0 dB = 21.7 W/kg = 13.36 dBW/kg Test Laboratory: TUV Inc. Date: 2026/3/30 System Check_HSL5600MHz DUT: D5GHzV2 - SN1203 Communication System: CW; Frequency: 5600 MHz; Duty Cycle: 1:1 Medium: HSL5G_260330 Medium parameters used: f = 5600 MHz; σ = 4.953 S/m; ε r = 34.786; ρ = 1000 kg/m 3 Ambient Temperature：23.5 °C; Liquid Temperature：22.4 °C DASY Configuration: Electronics: DAE4 Sn855; Calibrated: 2025/4/23 Probe: EX3DV4 - SN7400; ConvF(5.12, 4.57, 5.29) @ 5600 MHz; Calibrated: 2025/5/21 Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -9.0, 23.0 Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1153 DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Pin=100mW/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 12.5 W/kg Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 70.55 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 40.0 W/kg SAR(1 g) = 7.82 W/kg; SAR(10 g) = 2.19 W/kg Maximum value of SAR (measured) = 21.2 W/kg 0 dB = 21.2 W/kg = 13.26 dBW/kg Test Laboratory: TUV Inc. Date: 2026/3/27 System Check_HSL5750MHz DUT: D5GHzV2 - SN1203 Communication System: CW; Frequency: 5750 MHz; Duty Cycle: 1:1 Medium: HSL5G_260327 Medium parameters used: f = 5750 MHz; σ = 5.129 S/m; ε r = 34.908; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：22.5 °C DASY Configuration: Electronics: DAE4 Sn855; Calibrated: 2025/4/23 Probe: EX3DV4 - SN7400; ConvF(5.21, 4.66, 5.39) @ 5750 MHz; Calibrated: 2025/5/21 Sensor-Surface: 1.4mm (Mechanical Surface Detection), z = -9.0, 23.0 Phantom: ELI V5.0 (20deg probe tilt); Type: QD OVA 002 AA; Serial: 1153 DASY52 52.10.4(1535); SEMCAD X 14.6.14(7501) Pin=100mW/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 12.3 W/kg Pi…

Text truncated - open the document above for the full version.

Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B42 von B75 Page B42 of B75 802.11a CH 157 (Horizontal) Peak CH 157 (Vertical) Peak Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B43 von B75 Page B43 of B75 802.11a CH 165 (Horizontal) Peak CH 165 (Vertical) Peak Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B44 von B75 Page B44 of B75 802.11n HT20 CH 149 (Horizontal) Peak CH 149 (Vertical) Peak Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B45 von B75 Page B45 of B75 802.11n HT20 CH 157 (Horizontal) Peak CH 157 (Vertical) Peak Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B46 von B75 Page B46 of B75 802.11n HT20 CH 165 (Horizontal) Peak CH 165 (Vertical) Peak Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B47 von B75 Page B47 of B75 Spurious Emissions, Tx Mode, 30MHz ~ 1GHz 802.11a CH 64 (Horizontal) CH 64 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B48 von B75 Page B48 of B75 Spurious Emissions, Tx Mode, 1GHz ~ 40GHz U-NII-1 802.11a CH 36 (Horizontal) CH 36 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B49 von B75 Page B49 of B75 802.11a CH 40 (Horizontal) CH 40 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B50 von B75 Page B50 of B75 802.11a CH 48 (Horizontal) CH 48 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B51 von B75 Page B51 of B75 802.11n HT20 CH 36 (Horizontal) CH 36 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B52 von B75 Page B52 of B75 802.11n HT20 CH 40 (Horizontal) CH 40 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B53 von B75 Page B53 of B75 802.11n HT20 CH 48 (Horizontal) CH 48 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B54 von B75 Page B54 of B75 U-NII-2A 802.11a CH 52 (Horizontal) CH 52 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B55 von B75 Page B55 of B75 802.11a CH 60 (Horizontal) CH 60 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B56 von B75 Page B56 of B75 802.11a CH 64 (Horizontal) CH 64 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B57 von B75 Page B57 of B75 802.11n HT20 CH 52 (Horizontal) CH 52 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B58 von B75 Page B58 of B75 802.11n HT20 CH 60 (Horizontal) CH 60 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B59 von B75 Page B59 of B75 802.11n HT20 CH 64 (Horizontal) CH 64 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B60 von B75 Page B60 of B75 U-NII-2C 802.11a CH 100 (Horizontal) CH 100 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B61 von B75 Page B61 of B75 802.11a CH 116 (Horizontal) CH 116 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B62 von B75 Page B62 of B75 802.11a CH 140 (Horizontal) CH 140 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B63 von B75 Page B63 of B75 802.11a CH 144 (Horizontal) CH 144 (Vertical) Prü fbericht - Nr.: Test Report No. CN26VQ0K 001 Seite B64 von B75 Page B64 of B75 802.11n HT20 CH 100 (Horizontal) CH 100 (Vertical) Prü …

Text truncated - open the document above for the full version.