2BHCR-LY06LY06

Hunan Xiangdangdang Intelligent Technology Co., Ltd

Click to zoom

Application Details

Equipment Class: DTS - Digital Transmission System
Date of Grant: Jul 17, 2024
Application Purpose: Original Equipment
Date of Application: Jul 17, 2024
Equipment Note: LY06
Frequency Range: 2402.00000000 - 2480.00000000
Company: Hunan Xiangdangdang Intelligent Technology Co., Ltd
Country: China

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

保修Warrantystatemen 1、产品如有任何功能问题，均可享受有保修服务，联系客服。Iftheproducthasanyfunctionproblem,canenjoythe warrantyservice,contactcustomerservice. 2、人为损坏、摔坏、人为刮花、进水、无保修卡者不在保修范围内。Artificialdamage,broken,artificialscratch,water, nowarrantycardisnotwithinthescopeofthewarranty. 3、客户必须填写所有必要资料(客户姓名、地址、电话、购买日期等)。Thecustomermustfillinallnecessaryinformation (customername,address,telephonenumber,dateofpurchase, etc.). 4、保修服务需在保修卡并按要求操作即可保修，否则不保修Thewarrantyserviceneedstobeinthewarrantycardand accordingtotherequestoperationthenthewarranty, otherwisedoesnotguarantee 产品型号Mode: 客户姓名Name: _________________ 联系电话Tel: __________________ 客户地址Add: __________________ 购买日期Date： ________________ 参数配置真正无线连接（TWS）实现无线立体声，左右声道分离，HIFI音效，左右耳均具有完整蓝牙功能，可单独使用也可以成对使用注：产品参数因机型，使用方式，环境等等会有所不同。支持协议：A2DP1.3/HIFI1.6/HFP1.6/AVRCP1.6/HSP1.2 传输距离：8米频率：2.4G 电量显示：支持耳机充电时间：约1.5小时充电仓充电时间：约1.5小时说明书无线双耳立体声音乐耳机充电 1、1.1耳机充电时指示灯常亮，充满后灯灭； 1.2充电仓充电时充电指示灯闪，充满时指示灯常亮。 2、本产品内置不可拆卸电池的可重复充电电池，充电方式为外置线充电。 3、充电电流为1A电压为5V，不能用超过5V1A的充电器对产品进行充电。 4.蓝牙耳机/充电仓充电充满大约需要1.5小时。 5.当蓝牙耳机电量过低时，耳机会每隔一段时间发出提示音提醒用户充电功能介绍 █开机-从充电仓取出耳机，耳机自动开机配对，也可以长按耳机多功能键3秒听到“开机”提示音。 █关机-把耳机放进充电耳机自动关机，也可以长按耳机多功能键5秒听到“关机”提示音代表耳机已关机。 █配对状态-耳机指示灯主耳指示灯交替闪，副耳指示灯灭代表双耳已配对，如无指示灯可听到耳机“蓝牙已连接”提示音 █音乐播放暂停-单击任意耳机多功能键。 █接听电话-单击任意耳机多功能键。 █挂断电话-通话中单击任意耳机多功能键。 █拒接电话-来电时长按2秒任意耳机多功能键。 █下一曲-音乐状态下双击左耳多功能键。 █上一曲-音乐状态下双击右耳多功能键。 █加音量-音乐状态下三击左耳多功能键。 █减音量-音乐状态下三击右耳多功能键。 █语音助手-开机状态下长按3秒任意耳机多功能键 █自动回连-开机即可，须之前有过配对记录 WirelessBinaural Stereomusicheadphones Manual Parameterconfiguration Truewirelessconnectivity(TWS)toachievewirelessstereo, leftandrightchannelseparation,HIFIaudio,leftandright earshaveafullbluetoothfunction,canbeusedaloneorin pairs Note:theproductparameterswillbedifferentaccording tothemachinetype,usagemode,environmentandsoon. SupportAgreement: A2DP1.3/HIFI1.6/HFP1.6/AVRCP1 .6/HSP1.2 Transmissiondistance:8M Frequency:2.4G Powerreading:YES Headphonecharging time 1.5H ChargingTime:1.5H Charge 1、1.1Whentheheadsetischarged,theindicatorlightisalways bright,andwhentheheadsetisfull,theindicatorlightturnsoff 1.2Thechargingindicatorlightsflashwhenthecharging binischarged,anditalwayslightswhenitisfull. 2、Thisproductbuilt-innon-removablerechargeablebattery, chargingmodeforexternalwirecharging. 3、Chargingcurrent1Avoltage5V,cannotusemorethan5V1A chargertochargetheproduct. 4.Ittakesabout1.5hoursfortheBluetoothheadset/charging docktobefullycharged. 5.WhenthepoweroftheBluetoothheadsetistoolow,the headsetwillsendoutanalertsoundtoremindtheuserto chargeitatregularintervals. █ Poweroff-Takeouttheearphone,earphoneautomaticboot pair,longpresstheearphone5secondstohearthe“Power off”sound. █ Pair-Puttheheadphonesintothechargingautomatic shutdown,youcanalsopresstheheadphones5secondsto hearthe“connected”sound █Playpause-clickanyheadset █Listentothephone-clickanyheadset █Hangup-clickanyheadsetduringacall █ Rejectcalls-pressanyheadsetfor2seconds █ Lastsong-doubleclickontheear █Nexttrack-doubleclickonthemainear。 █Increasevolume-threeclicksonthemainear █ Volumereduction-threeclickstotheearpair █ Voiceassistant-pressanyheadsetfor3seconds █Auto-reconnect-justturniton,theremustbeamatching recordbefore Functionintroduction █ Poweron-takeouttheheadphonefromthechargingbin. Theheadphonewillautomaticallyturnonandpair.Youcan alsopressthemulti-functionkeyoftheheadphonefor3 secondstohearthe“Poweron”sound. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Attestation Statements

HunanXiangdangdangIntelligentTechnologyCo., Ltd HonghuayuanIndustrialPark, LufengTown IndustrialConcentration Zone, Xupu County,HuaihuaCity, HunanProvince,China FederalCommunicationsCommission Authorizationand EvaluationDivision EquipmentAuthorizationBranch 7435 OaklandMills Road Columbia,MD 21046 2024-7-4 U.S. AgentDesignation HunanXiangdangdangIntelligentTechnologyCo., Ltdacknowledgestheir consentfor the followingcontact locatedin the UnitedStatesto act as their agent for serviceof processfor the equipmentfor which authorization is sought(FCC ID:2BHCR-LY06): Nameand companyof U.S. agent:ACT Lab LLC PhysicalU.S. addressof agent:3280 East 59th StreetLong Beach,CA 90805UnitedStates FRN of U.S. agent:0033465568 Email addressof U.S. agent:[email protected] ACT Lab LLCacknowledgestheir obligationto acceptserviceof processon behalfofHunanXiangdangdang IntelligentTechnologyCo., Ltd . HunanXiangdangdangIntelligentTechnologyCo., Ltdwith the FRN[0035629104]acceptsits obligationto maintainan agent for serviceof processin the UnitedStatesfor no less than one year after either the granteehas permanentlyterminatedall marketingand importationof the applicableequipmentwithinthe U.S., or the conclusionof any Commission-relatedadministrativeor judicialproceedinginvolvingthe equipment,whicheveris later. By signingthis form, we confirmthe aboveand that we are awareof the applicationrequirementslisted under§ 2.911(d)(7). The informationprovidedin this letter is basedon the referencedrule parts of Title 47 of the CFR as well as KDB 986446D01. An expirationdate for this letter does not exist. In case the U.S. agent changes,the granteeis obligatedto notify the FCC within 30 days via the grantingTCB. Sincerely, Signature yanxinpan Manager HunanXiangdangdangIntelligentTechnologyCo., Ltd {代理商签名} Signature Scott Huber SeniorTechnicalDirector ACT Lab LLC 48_[model] US_Agent_2.911(d)(7)-U, V05

Cover Letter(s)

HunanXiangdangdangIntelligentTechnologyCo.,Ltd Add:HonghuayuanIndustrialPark,LufengTownIndustrialConcentrationZone,Xupu County,HuaihuaCity,HunanProvince,China Date:2024-7-4 FCCID:2BHCR-LY06 DearSir/Madam, We,HunanXiangdangdangIntelligentTechnologyCo.,LtdHerebydeclaresthefollowing statementforFederalCommunicationsCommission,PCBboard,circuit,structureandinternal ofthesemodel(s)arethesame,Onlymodelnumberisdifferentforthesemodel: Productname:LY06 Modelno.:LY06,LY01,LY02,LY03,LY05,LY08,LY09,LY20,LY21,LY40,LY41,LY48,SP23,LY80, LY80B,LY91,LY95,LY98,LY99 Sincerely, Name/Title ： yanxinpan/Manager Company: HunanXiangdangdangIntelligentTechnologyCo.,Ltd Address: HonghuayuanIndustrialPark,LufengTownIndustrial ConcentrationZone,XupuCounty,HuaihuaCity,Hunan Province,China Phone: +8618124119890 Fax: 0755-26509195 E-Mail: [email protected]

Cover Letter(s)

CONFIDENTIALITYREQUEST forCertificationServiceinUSA FederalCommunicationCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21046 Date:<2024-7-4> PursuanttoParagraphs§0.457and0.459oftheCommission’sRules(47C.F.R.)and Section§552(b)(4)oftheFreedomofInformationAct,werequestsconfidentialityfor thefollowingproducts: FCCIDModelname 2BHCR-LY06LY06 Fortheproductstatedabove,werequestthatthefollowinginformationbeheld confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term ConfidentialityDays ExternalPhotos InternalPhotos BlockDiagram Schematics TestSetupPhotos User’sManual PartsList TuneUp OperationalDescriptions Thelong-termconfidentialityexhibitscontainourtradesecretsandproprietary informationthatcouldbeofbenefittoourcompetitors. Theshort-termconfidentialityonthebasisofensuringthatbusinesssensitive informationremainsconfidentialuntiltheactualmarketingofournewdevice. Ifyouhaveanyquestions,pleasefeelfreetocontactmeattheaddressshownbelow. Sincerely, Name/Title： yanxinpan/Manager Company: HunanXiangdangdangIntelligentTechnologyCo.,Ltd Address: HonghuayuanIndustrialPark,LufengTownIndustrial ConcentrationZone,XupuCounty,HuaihuaCity,Hunan Province,China Phone: +8618124119890 Fax: 0755-26509195 E-Mail: [email protected]

Cover Letter(s)

External Photos

FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Photo 9 Appearance of EUT

ID Label/Location Info

FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Appendix I Label FCC ID: 2BHCR-LY06 Model: LY06 FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Appendix II Label Location

Internal Photos

FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 10 Appearance of PCB Photo 11 Appearance of PCB FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Photo 12 Appearance of PCB Photo 13 Appearance of PCB BT Antenna FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Photo 14 Battery Appearance Photo 15 Battery Appearance

RF Exposure Info

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202405-0335-6 Page: 1 of 3 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Maximum Permissible Exposure Evaluation FCC ID: 2BHCR-LY06 1. General Information about EUT 1.1 Client Information Applicant : Hunan Xiangdangdang Intelligent Technology Co., Ltd Address : Honghuayuan Industrial Park, Lufeng Town Industrial Concentration Zone, Xupu County, Huaihua City, Hunan Province, China Manufacturer : Hunan Xiangdangdang Intelligent Technology Co., Ltd Address : Honghuayuan Industrial Park, Lufeng Town Industrial Concentration Zone, Xupu County, Huaihua City, Hunan Province, China 1.2 General Description of EUT (Equipment Under Test) EUT Name : LY06 Models No. : LY06, LY01, LY02, LY03, LY05, LY08, LY09, LY20, LY21, LY40, LY41, LY48, SP23, LY80, LY80B, LY91, LY95, LY98, LY99 Model Different : All these models are identical in the same PCB, layout and electrical circuit, The only difference is model name, brand name and product name. Brand Name : N/A Sample ID : HC-C-202405-0335-01-01 Product Description : Operation Frequency: Bluetooth&BLE: 2402MHz~2480MHz Antenna Gain: 2.7dBi Chip Antenna Power Rating : USB Input:5V Charger Box: DC 3.7V 150mAh by rechargeable Li-ion battery Earphone: DC 3.7V 25mAh by rechargeable Li-ion battery Software Version : 210/125 Hardware Version : 5.4 Remark: The adapter provided by the TOBY ,the antenna gain from the manufacturer, the verified for the RF conduction test provided by TOBY test lab.The above antenna information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications, the laboratory shall not be held responsible. Report No.: TBR-C-202405-0335-6 Page: 2 of 3 TB-RF-074-1.0 SAR Test Exclusion Calculations 1. FCC: According to KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06. (1) Clause 4.3: General SAR test reduction and exclusion guidance Sub clause 4.31: Standalone SAR test exclusion considerations 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6GHz at test separation distance≤5 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√ f (GHz) ] ≤3.0 for 1-g SAR [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√ f (GHz) ] ≤7.5.0 for 10-g SAR 2. Summary simultaneous transmission for SAR Exclusion The SAR exemption limits outlined in clause 4.3.2(b) of KDB 447498 have been derived based on an approximate SAR value of 0.4 W/kg using half-wave dipole antennas Footnote 1. As such, when simultaneous transmitter SAR evaluations include transmitters that have been exempt from routine SAR evaluation, the SAR must be estimating based on the ratio between the maximum tune-up tolerance limit of the transmitter that has been exempt and the exemption limit at the specific distance and frequency for that transmitter. This ratio must be multiplied by 0.4 W/kg (2.0 W/kg for controlled use and 1.0 W/kg for limb worn devices) in order to calculate the estimated SAR level. The estimate SAR value is calculated based the following equation: (maximum power level including tune-up tolerance for transmitter A / maximum power level of exemption at the same frequency and distance) * 0.4W/kg The [∑ of (the highest measured or estimated SAR for each standalone antenna configuration, adjusted for maximum tune-up tolerance) / 1.6 W/kg] + [∑ of MPE ratios] is ≤ 1.0. The SAR to peak location separation ratios of all simultaneously transmitting antenna pairs operating in portable device exposure conditions are all ≤ 0.04, and the [∑ of MPE ratios] is ≤ 1.0. Report No.: TBR-C-202405-0335-6 Page: 3 of 3 TB-RF-074-1.0 3. Calculation: Test separation: 5mm Bluetooth Mode (GFSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 -0.773 -1±1 0 1.000 0.310 3.0 2441 -0.899 -1±1 0 1.000 0.312 3.0 2480 -1.138 -1±1 0 1.000 0.315 3.0 Bluetooth Mode (π/4-DQPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 0.36 0±1 1 1.259 0.390 3.0 2441 0.347 0±1 1 1.259 0.393 3.0 2480 -0.007 0±1 1 1.259 0.397 3.0 BLE 1M Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 -0.411 -1±1 0 1.000 0.310 3.0 2440 -0.759 -1±1 0 1.000 0.312 3.0 2480 -1.064 -1±1 0 1.000 0.315 3.0 BLE 2M Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 -0.268 0±1 1 1.259 0.390 3.0 2440 -0.594 0±1 1 1.259 0.393 3.0 2480 -0.877 0±1 1 1.259 0.397 3.0 Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06. -----END OF REPORT-----

Test Report

2.4GHz1608ChipAntenna: RANT1608F245C01/1608F245C04/1608F245C05 １ Application: WLAN,802.11b/g,Bluetooth,WLAN,etc... Features SMD,highreliability,ultraImpact,Omni-directional... PartnumberInformation RANT1608F245C01/04 (A)(B)(C)(D)(E)(F) ElectricalSpecification DimensionandTerminalConfiguration No.TerminalName 1Feeding/GNG 2GND/Feeding (A)ProductTypeChipAntenna (B)SizeCode 1.6x0.8mm( ± 0.1mm) (C)MaterialHighKmaterial (D)Frequency2.4~2.5GHz (E)FeedingmodePIFA&SingleFeeding (F)AntennatypeType=01/04/05 WorkingFrequencyRange2400~2500MHz Bandwidth120MHz(Min.) PeakGain2.7dBi(Typ.) Impedance50Ohm Returnloss10dB(Min) PolarizationLinear AzimuthBeamwidthOmni-directional OperationTemperature( °C )-40~85 °C ResistancetoSolderingHeats 10sec.(@280 °C ) TerminationNi/Au(Leadless) Dimension(mm) L 1.60±0.10 W 0.80 ± 0.10 T 0.80 ± 0.10 咏成國際科技有限公司電話 :13530576606 RAINInternationalTechnologyCo.,Ltd.TEL:13530576606 2.4GHz1608ChipAntenna: RANT1608F245C01/1608F245C04/1608F245C05 ２ 1 EvaluationBoardReference 长条板Layout建议参考如下： Toplayer: Bottomlayer: 2.4GHz1608ChipAntenna: RANT1608F245C01/1608F245C04/1608F245C05 ３异形Layout建议参考如下： Toplayer: Toplayer: 2.4GHz1608ChipAntenna: RANT1608F245C01/1608F245C04/1608F245C05 ４ ElectricalCharacteristics ReturnLoss&Radiation ELECTRICALCHARACTERISTICSS11 RadiationPattern 2.4GHz1608ChipAntenna: RANT1608F245C01/1608F245C04/1608F245C05 ５ ElectricalCharacteristics 2.4GHz1608ChipAntenna: RANT1608F245C01/1608F245C04/1608F245C05 ６ TapingSpecifications ReelandTapingSpecification ReelSpecification TYPESIZEABCD 16087”4K/Reel 4.0±0.5 4.0±213.5±0.5178±2 TappingSpecification PackagingTypeABWEFGHTψDP PaperType1608 1.90±0.203.50±0.208.0±0.201.75±0.103.5±0.054.0±0.102.0±0.050.75±0.10 1.50±0.10 4.0±0.1 2.4GHz1608ChipAntenna: RANT1608F245C01/1608F245C04/1608F245C05 ７ ReliabilityTable TestItemProcedure Requirements CeramicType Remark (Reference) Electrical Characterization Fulfilltheelectrical specification UserSpec. Thermal Shock 1.Preconditioning: 50±10°C/1hr,thenkeepfor24±1hrsatroomtemp. 2.Initialmeasure:Spec:referInitialspec. 3.Rapidchangeoftemperaturetest: -30°Cto+85°C;100cycles; 15minutesatLowercategorytemperature; 15minutesatUppercategorytemperature. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 107 Temperature Cycling 1.Initialmeasure:Spec:referInitialspec. 2.100Cycles(-30°Cto+85°C),SoakMode=1(2Cycle/hours). 3.Measurementat24±2Hoursaftertestcondition. NoVisibleDamage. Fulfilltheelectrical specification. JESD22 JA104 HighTemperature Exposure 1.Initialmeasure:Spec:referInitialspec. 2.Unpowered;500hours@T=+85°C. 3.Measurementat24±2hoursaftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 LowTemperature Storage 1.Initialmeasure:Spec:referInitialspec. 2.Unpowered:500hours@T=-30°C. 3.Measurementat24±2hoursaftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 Solderability (SMDBottomSide) Dippingmethod: a.Temperature:235±5°C b.Dippingtime:3±0.5s Thesoldershouldcover over95%ofthecritical areaofbottomside. IEC60384-21/22 4.10 SolderingHeat Resistance (RSH) Preheatingtemperature:150±10°C. Preheatingtime:1~2min. Soldertemperature:260±5°C. Dippingtime:5±0.5s NoVisibleDamage.IEC60384-21/22 4.10 Vibration5g'sfor20min.,12cycleseachof3orientations Note:Use8"X5"PCB.031"thick7securepointson,onelong sideand2securepointsatcornersofoppositesides.Parts mountedwithin2"fromanysecurepoint.Testfrom10-2000 Hz. NoVisibleDamage.MIL-STD-202 Method204 Mechanical Shock Threeshocksineachdirectionshallbeappliedalongthethree mutuallyperpendicularaxesofthetestspecimen(18shocks) Peakvalue:1,500g’s Duration:0.5ms Velocitychange:15.4ft/s Waveform:Half-sine NoVisibleDamage.MIL-STD-202 Method213 Humidity Bias 1.Humidity:85%R.H.,Temperature:85±2°C. 2.Time:500±24hours. 3.Measurementat24±2hrsaftertestcondition. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 Method106 2.4GHz3216ChipAntenna: RANT1608F245C01/RANT1608F245C04/1608F245C05 _ ８ Board Flex (SMD) 1.Mountingmethod: IR-Reflow.PCBSize(L:100×W:40×T:1.6mm) 2.Applytheloadindirectionofthearrowuntilbendingreaches 2mm. NoVisibleDamage.AEC-Q200 005 AdhesionForceof1.8Kgfor60seconds.NoVisibleDamage Magnificationof20Xor greatermaybeemployed forinspectionofthe mechanicalintegrityofthe devicebodyterminalsand body/terminaljunction. AEC-Q200 006 Physical Dimension Anyapplicablemethodusingx10magnification,micrometers, calipers,gauges,contourprojectors,orothermeasuring equipment,capableofdeterminingtheactualspecimen dimensions. Inaccordancewith specification. JESD22 JB100 RevisionHistory RevisionDateContent 12019/03/01NewDatasheet 22020/02/22Add2Dradiationcharacteristic

Test Report

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0335-3 Page: 1 of 39 FCC ID: 2BHCR-LY06 TB-RF-074-1.0 RF Test Data for Bluetooth LE (Conducted Measurements) General Description of EUT Product Name: LY06 Test Model: LY06 Sample ID: HC-C-202405-0335-01-02 Environmental Conditions Temperature: 24.2°C Relative Humidity: 52.8% Test Voltage: DC 3.7V Test Engineer: Jolin Lee Note: For a more detailed features description, please refer to the report TBR-C-202405-0335-3 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0335-3 Page: 2 of 39 FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Contents 1. Duty Cycle ........................................................................................................................................................................................... 3 2. Maximum Conducted Output Power ................................................................................................................................................. 7 3. -6dB Bandwidth ................................................................................................................................................................................ 11 4. Occupied Channel Bandwidth ......................................................................................................................................................... 15 5. Maximum Power Spectral Density Level ......................................................................................................................................... 19 6. Band Edge ........................................................................................................................................................................................ 23 7. Conducted RF Spurious Emission .................................................................................................................................................. 28 8. Restrict Band .................................................................................................................................................................................... 35 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0335-3 Page: 3 of 39 FCC ID: 2BHCR-LY06 TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT BLE 1Mbps 2402 Ant1 85.2 0.7 0.47 NVNT BLE 1Mbps 2440 Ant1 85.6 0.68 0.47 NVNT BLE 1Mbps 2480 Ant1 85.2 0.7 0.47 NVNT BLE 2Mbps 2402 Ant1 43.2 3.65 0.93 NVNT BLE 2Mbps 2440 Ant1 43.6 3.61 0.92 NVNT BLE 2Mbps 2480 Ant1 43.2 3.65 0.93 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0335-3 Page: 4 of 39 FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Test Graphs Duty Cycle NVNT BLE 1Mbps 2402MHz Ant1 Duty Cycle NVNT BLE 1Mbps 2440MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0335-3 Page: 5 of 39 FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Duty Cycle NVNT BLE 1Mbps 2480MHz Ant1 Duty Cycle NVNT BLE 2Mbps 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0335-3 Page: 6 of 39 FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Duty Cycle NVNT BLE 2Mbps 2440MHz Ant1 Duty Cycle NVNT BLE 2Mbps 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0335-3 Page: 7 of 39 FCC ID: 2BHCR-LY06 TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Total Power (dBm) Limit (dBm) Verdict NVNT BLE 1Mbps 2402 Ant1 -0.411 30 Pass NVNT BLE 1Mbps 2440 Ant1 -0.759 30 Pass NVNT BLE 1Mbps 2480 Ant1 -1.064 30 Pass NVNT BLE 2Mbps 2402 Ant1 -0.268 30 Pass NVNT BLE 2Mbps 2440 Ant1 -0.594 30 Pass NVNT BLE 2Mbps 2480 Ant1 -0.877 30 Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0335-3 Page: 8 of 39 FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Test Graphs Power NVNT BLE 1Mbps 2402MHz Ant1 Power NVNT BLE 1Mbps 2440MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0335-3 Page: 9 of 39 FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Power NVNT BLE 1Mbps 2480MHz Ant1 Power NVNT BLE 2Mbps 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0335-3 Page: 10 of 39 FCC ID: 2BHCR-LY06 TB-RF-074-1.0 Power NVNT BLE 2Mbps 2440MHz Ant1 Power NVNT BLE 2Mbps 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0335-3 Page: 11 of 39 FCC ID: 2BHCR-LY06 TB-RF-074-1.0 3. -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT BLE 1Mbps 2402 Ant1 0.7…

Text truncated - open the document above for the full version.

Test Report

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202405-0335-3 Page: 1 of 34 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID: 2BHCR-LY06 Report No. : TBR-C-202405-0335-3 Applicant : Hunan Xiangdangdang Intelligent Technology Co., Ltd Equipment Under Test (EUT) EUT Name : LY06 Model No. : LY06 Series Model No. : LY01, LY02, LY03, LY05, LY08, LY09, LY20, LY21, LY40, LY41, LY48, SP23, LY80, LY80B, LY91, LY95, LY98, LY99 Brand Name : N/A Sample ID : HC-C-202405-0335-01-01&HC-C-202405-0335-01-02 Receipt Date : 2024-06-18 Test Date : 2024-06-18 to 2024-07-01 Issue Date : 2024-07-01 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Test By : Jolin Lee Reviewed By : Henry Huang Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202405-0335-3 Page: 2 of 34 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................ 2 1. ENERAL INFORMATION ABOUT EUT ......................................…

Text truncated - open the document above for the full version.