2BHCX-13500LBWINCHelectric winch

14 15

17 19 FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. *RF warning for Mobile device: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 21 Wireless remote control use method INOUT ON/OFF You can turn the wireless remote ON and OFF by clicking the ON/OFF button, and the indicator light will light up when the remote is turned on Press the IN button and winch will retract the rope, press the OUT button and winch will release the rope. Release the IN/OUT button and winch brakes automatically The remote control will turn off automatically if it is not operat- ed for three minutes FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Ningbo Fuyou outdoor products Co., LTD 9 / F, Building 11 (A), u Valley Industrial Zone, Liandong, Jiangshan Town, Yinzhou District, Ningbo City, Zhejiang Province China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-9-7 To whom it may concern: We, Ningbo Fuyou outdoor products Co., LTD, hereby certify that the equipment for which authorization is sought (FCC ID: 2BHCX-13500LBWINCH) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Maojie Chen Manager Ningbo Fuyou outdoor products Co., LTD 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V03

NingboFuyououtdoorproductsCo.,LTD FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 2024-9-2 U.S.AgentDesignation {NingboFuyououtdoorproductsCo.,LTD}acknowledgestheirconsentforthefollowingcontactlocatedinthe UnitedStatestoactastheiragentforserviceofprocessfortheequipmentforwhichauthorizationissought (FCCID:2BHCX-13500LBWINCH): NameandcompanyofU.S.agent:UUXGROUPINC PhysicalU.S.addressofagent:36South18thAvenue,SuiteABrighton,CO80601UnitedStates FRNofU.S.agent:0033701590 EmailaddressofU.S.agent:[email protected] {UUXGROUPINC}acknowledgestheirobligationtoacceptserviceofprocessonbehalfof{NingboFuyou outdoorproductsCo.,LTD}. {NingboFuyououtdoorproductsCo.,LTD}withtheFRN[0035629591]acceptsitsobligationtomaintainan agentforserviceofprocessintheUnitedStatesfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S.,orthe conclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheveris later. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirementslistedunder§ 2.911(d)(7). TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB 986446D01. Anexpirationdateforthisletterdoesnotexist.IncasetheU.S.agentchanges,thegranteeisobligatedtonotify theFCCwithin30daysviathegrantingTCB. Sincerely, Signature {MaojieChen} {Manager} {NingboFuyououtdoorproductsCo.,LTD} Signature {JackFu} {Manager} {UUXGROUPINC} 4 8 _ [ m o d e l ] U S _ A g e n t _ 2 . 9 1 1 ( d ) ( 7 ) - U , V 0 5

Ningbo Fuyou outdoor products Co., LTD Add: 9 / F, Building 11 (A), u Valley Industrial Zone, Liandong, Jiangshan Town, Yinzhou District, Ningbo City, Zhejiang Province China Date: 2024-9-7 FCC ID: 2BHCX-13500LBWINCH Dear Sir/Madam, We, Ningbo Fuyou outdoor products Co., LTD Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: electric winch Model no.: 13500LB WINCH, 12000LB WINCH, 9500LB WINCH Sincerely, Name/Title： Maojie Chen/Manager Company: Ningbo Fuyou outdoor products Co., LTD Address: 9 / F, Building 11 (A), u Valley Industrial Zone, Liandong, Jiangshan Town, Yinzhou District, Ningbo City, Zhejiang Province China Phone: +86-15088803660 Fax: +86-15088803660 E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-9-7> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2BHCX-13500LBWINCH 13500LB WINCH For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Maojie Chen/Manager Company: Ningbo Fuyou outdoor products Co., LTD Address: 9 / F, Building 11 (A), u Valley Industrial Zone, Liandong, Jiangshan Town, Yinzhou District, Ningbo City, Zhejiang Province China Phone: +86-15088803660 Fax: +86-15088803660 E-Mail: [email protected]

Ningbo Fuyou outdoor products Co., LTD 9 / F, Building 11 (A), u Valley Industrial Zone, Liandong, Jiangshan Town, Yinzhou District, Ningbo City, Zhejiang Province China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-9-7 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2BHCX-13500LBWINCH including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Maojie Chen/Manager Company: Ningbo Fuyou outdoor products Co., LTD Address: 9 / F, Building 11 (A), u Valley Industrial Zone, Liandong, Jiangshan Town, Yinzhou District, Ningbo City, Zhejiang Province China Phone: +86-15088803660 Fax: +86-15088803660 E-Mail: [email protected]

FCCID:2BHCX-13500LBWINCH FCCID:2BHCX-13500LBWINCH FCCID:2BHCX-13500LBWINCH

FCCID:2BHCX-13500LBWINCH

FCCID:2BHCX-13500LBWINCH FCCID:2BHCX-13500LBWINCH FCCID:2BHCX-13500LBWINCH FCCID:2BHCX-13500LBWINCH

Page 1 of 3 RF EXPOSURE EVALUATION FCC ID: 2BHCX-13500LBWINCH Product Name : electric winch Model Name : 13500LB WINCH, 12000LB WINCH,9500LB WINCH Operating frequency : 433.95MHz Numbers of Channel : 1 channel For SRD Antenna Type : PCB Antenna Antenna Gain : 0dBi Type of Modulation : ASK Power supply : DC 12V Hardware Version : N/A Software Version : N/A Page 2 of 3 Standard Requirement According to § 15.247(i) and § 1.1307b(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. See KDB 447498 D01 General RF Exposure Guidance v06, section 4. 3. 1. The 1-g and 10-g SAR test exclusion thresholds for 100MHz to 6GHz at test separation distances ≤ 50mm are determined by: [ (max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]*[ √f(GHz)] ≤3.0 for 1-g SAR and ≤7.5 for 10-g SAR extremity SAR, where ⚫ f(GHz) is the RF channel transmit frequency in GHz ⚫ Power and distance are rounded to the nearest mW and mm before calculation ⚫ The result is rounded to one decimal place for comparison. The test exclusions are applicable only when the minimum test separation distance is ≤ 50mm and for transmission frequencies between 100MHz and 6GHz. When the minimum test separation distance is <5mm, a distance of 5mm is applied to determine SAR test exclusion. Routine SAR evaluation refers to that specifically required by § 2.1093, using measurements or computer simulation. When routine SAR evaluation is not required, portable transmitters with output power greater than the applicable low threshold require SAR evaluation to quality for TCB approval. RF Output power Freq. (MHz) Field strength(max)(dBuV/m) EIRP (max) (dBm) 433.95 84.13 -11.07 Note: EIRP=E-104.8+20logD, Where E is the electric field strength in dBμV/m. EIRP is the equivalent isotropically radiated power in dBm. d is the specified measurement distance in m. where D=3, EIRP=E-95.2. Page 3 of 3 Channel (MHz) Maximum output power (dBm) Tune up tolerance (dBm) Max Tune Up Power (mW) Distance (mm) Calculation results Limit Operating Mode 433.95 -11.07 -11.07 ± 1 0.098401 5 0.012964 3 SRD According to KDB 447498, no stand-alone required for BT antenna, and no simultaneous SAR measurement is required. Signature Simon Pu Manager Date: 2024-07-19

Antennaspecification AntennaType:PCBAntenna AntennaGain:0dBi Manufacture'sname:NingboFenghuaJinnuoElectronicsCo.,Ltd. Address:ThirdFloor,No.548,NandaRoad,JinpingStreet,Fenghua District,NingboCity,ZhejiangProvince

FCCTESTREPORT FCCID:2BHCX-13500LBWINCH Product: electricwinch ModelName: 13500LBWINCH,12000LBWINCH,9500LBWINCH Brand: RUGCELWINCH ReportNo.: PTC24061907202E-FC01 Preparedfor NingboFuyououtdoorproductsCo.,LTD 9/F,Building11(A),uValleyIndustrialZone,Liandong,JiangshanTown,YinzhouDistrict,Ningbo City,ZhejiangProvince,China Preparedby PreciseTesting&CertificationCo.,Ltd Building1,No.6,TongxinRoad,DongchengStreet,Dongguan,Guangdong,China ReportNo.:PTC24061907202E-FC01 Page 2 of 32 1.TESTRESULTCERTIFICATION Applicant’sname:NingboFuyououtdoorproductsCo.,LTD Address: 9/F,Building11(A),uValleyIndustrialZone,Liandong,JiangshanTown, YinzhouDistrict,NingboCity,ZhejiangProvince,China Manufacture'sname:NingboFuyououtdoorproductsCo.,LTD Address:9/F,Building11(A),uValleyIndustrialZone,Liandong,JiangshanTown, YinzhouDistrict,NingboCity,ZhejiangProvince,China Product:electricwinch Model:13500LBWINCH,12000LBWINCH,9500LBWINCH Standards :FCCCFR47Part15Section15.231 Testprocedure :ANSIC63.10:2013 TestDate: Jun.25,2024toJul.19,2024 DateofIssue: Jul.19,2024 TestResult :Pass ThisdevicedescribedabovehasbeentestedbyPTC,andthetestresultsshowthatthe equipmentundertest(EUT)isincompliancewiththeFCCrequirements.Anditisapplicable onlytothetestedsampleidentifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofPTC,this documentmaybealteredorrevisedbyPTC,personalonly,andshallbenotedintherevision ofthedocument. TestEngineer: Jackzhou/Engineer TechnicalManager: SimonPu/Manager ReportNo.:PTC24061907202E-FC01 Page 3 of 32 Contents Page 2TESTSUMMARY.........................................................................................................................................4 3GENERALINFORMATION........................................................................................................................5 3.1GENERALDESCRIPTIONOFE.U.T.....................................................................................................5 3.2TESTMODE.........................................................................................................................................5 3.3TESTSITE............................................................................................................................................5 4EQUIPMENTDURINGTEST.....................................................................................................................6 4.1EQUIPMENTSLIST...............................................................................................................................6 4.2MEASUREMENTUNCERTAINTY...........................................................................................................6 5CONDUCTEDEMISSION..........................................................................................................................7 5.1E.U.T.OPERATION.............................................................................................................................7 5.2EUTSETUP.........................................................................................................................................7 5.3TESTSET-UP(BLOCKDIAGRAMOFCONFIGURATION)...................................................................8 5.4MEASUREMENTPROCEDURE..............................................................................................................8 5.5CONDUCTEDEMISSIONLIMIT.............................................................................................................8 5.6MEASUREMENTDESCRIPTION............................................................................................................8 5.7CONDUCTEDEMISSIONTESTRESULT...............................................................................................8 6PULSEDOPERATION...............................................................................................................................9 6.1TESTSETUP........................................................................................................................................9 7RADIATEDSPURIOUSEMISSIONS.....................................................................................................13 7.1EUTOPERATION...............................................................................................................................14 7.2TESTSETUP......................................................................................................................................15 7.3SPECTRUMANALYZERSETUP..........................................................................................................16 7.4TESTPROCEDURE............................................................................................................................17 7.5SUMMARYOFTESTRESULTS...........................................................................................................18 820DBBANDWIDTHMEASUREMENT..................................................................................................22 8.1TESTPROCEDURE............................................................................................................................22 8.2TESTSETUP......................................................................................................................................22 8.3TESTRESULT....................................................................................................................................23 9ANTENNAREQUIREMENT....................................................................................................................24 10TESTSETUP..............................................................................................................................................25 11EUTPHOTOS.............................................................................................................................................26 ReportNo.:PTC24061907202E-FC01 Page 4 of 32 2TestSummary TestItemsTestRequi…

Text truncated - open the document above for the full version.

FCCID:2BHCX-13500LBWINCH RadiatedSpuriousEmissions From30MHz-1000MHz Testfrequencyfrom1GHz