2BHHV-FT1210ZWRemote Controller

To: Federal Communications Commission Date: 2024/07/1 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii) (KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) FURN FAN CORPORATION (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) FURN FAN CORPORATION (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Type of Equipment subject to FCC Certification: Remote Controller FCC ID: 2BHHV-FT1210ZW If you have any questions, please feel free to contact me Contact Person: Kevin Wang in the Company: FURN FAN CORPORATION Date of Signature: 2024/07/17 ___________________________ Signatory (signature of the applicant)

2BHHV-FT1210ZW 0035825017 Remote Controller Revolution Lighting Furn Fan/Luvenair International Corp. Furn Fan/Luvenair International Corp. United States

Long/Short-term Confidentiality Request PHOENIX TESTLAB GmbH Date: 30 July 2024 Product Certification Königswinkel 10 D 32825 Blomberg FCC ID: 2BHHV-FT1210ZW To Whom It May Concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby request long-term confidential treatment of information accompanying this application as outlined below: ☒ Schematics ☐ Parts List ☒ Block Diagram ☐ Tune-Up Info ☒ Operational Description In addition we hereby request the following exhibits contained in this application to be temporarily (short-term confidentiality) withheld from the public disclosure ☒ for an initial period of 180 days ☐ until: ☐ not applicable ☒ External Photos ☒ Test Setup Photos ☒ Internal Photos ☒ Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. If you have any questions, please feel free to contact me. Yours sincerely, Signatory Printed Name: Kevin Wang Position: Sales

Date: 2024/07/17 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The FURN FAN CORPORATION. the undersigned, hereby authorizes Rico Deng from Intertek Testing Services Taiwan Ltd., Hsinchu Laboratory, to act on the behalf of the FURN FAN CORPORATION. solely in matters relating to the application for an FCC equipment authorization for FCCID: 2BHHV-FT1210ZW including the signing of documents in connection with this Application. Necessary acts carried out Intertek Testing Services Taiwan Ltd., Hsinchu Laboratory. on our behalf of the FURN FAN CORPORATION. in connection with the Application shall have the same effect as acts of the FURN FAN CORPORATION. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory Contact name: Kevin Wang Tel: 886-4-2539-5022 Email: [email protected] Company name : FURN FAN CORPORATION

FURN FAN CORPORATION TEST REPORT Model: FT1210ZW REPORT NUMBER 240700059THC-001 ISSUE DATE Aug. 13, 2024 PAGES 7 DOCUMENT CONTROL NUMBER GFT-OP-10h (28-Nov-2018) © 2020 Intertek Report No.: 240700059THC-001 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. GFT-OP-10h (28-Nov-2018) Page 1 of 7 Test Report Maximum Permissible Exposure (MPE) Evaluation Report Applicant: FURN FAN CORPORATION No. 12-1, Lane 338, Sec. 2, Feng Hsing Road,Hsin-Tien Village, Tan-Tzu Hsiang, 427 Taichung, Taiwan Product: Remote Controller Model No.: FT1210ZW FCC ID: 2BHHV-FT1210ZW Test Method/ Standard: 47 CFR FCC 1.1310 KDB 447498 Test By: Intertek Testing Services Taiwan Ltd Hsinchu Laboratory No. 17, Ln. 246, Niupu S. Rd. Xiangshan Dist., Hsinchu City 300075, Taiwan Designation Number: TW0597 Zero Chen Engineer Rico Deng Reviewer Report No.: 240700059THC-001 GFT-OP-10h (28-Nov-2018) Page 2 of 7 Revision History Report No. Issue Date Revision Summary 240700059THC-001 Aug. 13, 2024 Original report Report No.: 240700059THC-001 GFT-OP-10h (28-Nov-2018) Page 3 of 7 TEST REPORT Table of Contents 1. General Information ............................................................................................................... 4 1.1 Identification of the EUT .................................................................................................. 4 1.2 Antenna description ......................................................................................................... 4 1.3 Peripherals equipment ..................................................................................................... 4 2. Test specifications ................................................................................................................... 5 2.1 RF Exposure calculations .................................................................................................. 5 2.2 Operation mode ............................................................................................................... 6 2.3 Test equipment ................................................................................................................. 6 2.4 Test Set-up ........................................................................................................................ 6 3. Test results .............................................................................................................................. 7 Report No.: 240700059THC-001 GFT-OP-10h (28-Nov-2018) Page 4 of 7 TEST REPORT 1. General Information 1.1 Identification of the EUT Product: Remote Controller Model No.: FT1210ZW Operating Frequency: 433.92MHz Rated Power: DC 12V Power Cord: N/A Sample receiving date: 2024/02/22 Sample condition: Workable Test Date(s): 2024/06/06 1.2 Antenna description Antenna Type : Printed Antenna Connector Type : Fixed 1.3 Peripherals equipment Peripherals Brand Model No. Serial No. Data cable Battery (Customer provided) ALLKEY N/A N/A N/A Report No.: 240700059THC-001 GFT-OP-10h (28-Nov-2018) Page 5 of 7 TEST REPORT 2. Test specifications 2.1 RF Exposure calculations According to KDB 447498 D01 , Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06. Clause 4.3: General SAR test reduction and exclusion guidance Sub , clause 4.3.1: Standalone SAR test exclusion considerations a) For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where Report No.: 240700059THC-001 GFT-OP-10h (28-Nov-2018) Page 6 of 7 TEST REPORT 2.2 Operation mode Press EUT button to transmit The signal is maximized through rotation and placement in the three orthogonal axes. X axis Y axis Z axis After verifying three axes, we found the maximum electromagnetic field was occurred at Y axis. The final test data was executed under this configuration. 2.3 Test equipment Equipment Brand Model No. Serial No. Calibration Date Next Calibration Date Power Meter Anritsu ML2495A 0844001 2024/01/08 2025/01/07 Power Sensor Anritsu MA2491A 031543 2024/01/08 2025/01/07 20dB Attenuator Mini-Circuits BW-S20W5+ N/A 2024/05/23 2025/05/23 2.4 Test Set-up Remark: Cable loss = 21 dB Power meter Attenuator & DC block EUT Power sensor Report No.: 240700059THC-001 GFT-OP-10h (28-Nov-2018) Page 7 of 7 TEST REPORT 3. Test results Frequency (MHz) Output Power (dBm) Tune-up Tolerance (dB) Tune-up Output Power (dBm) Tune-up Output Power (mW) Exemption Limit (mW) 433.92 1.2 2 3.2 2.09 22.54 KDB 447498: SAR evaluation – Exemption limits for routine evaluation for 5mm Temperature: 23 °C Relative Humidity: 76 % Test date: 2024/06/06

FURN FAN CORPORATION TEST REPORT Model: FT1210ZW REPORT NUMBER 240200122THC-001 ISSUE DATE Aug. 13, 2024 PAGES 19 DOCUMENT CONTROL NUMBER GFT-OP-10h (28-Nov-2018) © 2020 Intertek Report No.: 240200122THC-001 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. GFT-OP-10h (28-Nov-2018) Page 1 of 19 Test Report 0597 Radio Spectrum TEST REPORT Applicant: FURN FAN CORPORATION No. 12-1, Lane 338, Sec. 2, Feng Hsing Road,Hsin-Tien Village, Tan-Tzu Hsiang, 427 Taichung, Taiwan Product: Remote Controller Model No.: FT1210ZW FCC ID: 2BHHV-FT1210ZW Test Method/ Standard: 47 CFR FCC Part 15.231 Test By: Intertek Testing Services Taiwan Ltd Hsinchu Laboratory No. 17, Ln. 246, Niupu S. Rd. Xiangshan Dist., Hsinchu City 300075, Taiwan Designation Number: TW0597 Zero Chen Engineer Rico Deng Reviewer Report No.: 240200122THC-001 GFT-OP-10h (28-Nov-2018) Page 2 of 19 TEST REPORT Revision History Report No. Issue Date Revision Summary 240200122THC-001 Aug. 13, 2024 Original report Report No.: 240200122THC-001 GFT-OP-10h (28-Nov-2018) Page 3 of 19 TEST REPORT Table of Contents Summary of Test Data ................................................................................................................ 4 1. General Information ............................................................................................................... 5 1.1 Identification of the EUT .................................................................................................. 5 1.2 Antenna description ......................................................................................................... 5 1.3 Operation mode ............................................................................................................... 6 1.4 Peripherals equipment ..................................................................................................... 6 2. Radiated emission test FCC 15.231 (b) ................................................................................... 7 2.1.1 Radiated emission from 9kHz to 30MHz uses Loop Antenna: ...................................... 7 2.1.2 Radiated emission below 1GHz using Bilog Antenna .................................................... 8 2.1.3 Radiated emission above 1GHz using Horn Antenna .................................................... 8 3. Measured bandwidth FCC 15.231(C) ................................................................................... 15 4. Timing requirement of operated transmitter....................................................................... 16 5. Conducted emission FCC 15.207 .......................................................................................... 17 Appendix A: Test equipment list ............................................................................................... 18 Appendix B: Measurement Uncertainty ................................................................................... 19 Report No.: 240200122THC-001 GFT-OP-10h (28-Nov-2018) Page 4 of 19 TEST REPORT Summary of Test Data Test Requirement Applicable Rule Result Radiated Emission test 15.231(b), 15.209 Pass Measured bandwidth 15.231(c) Pass Timing requirement of operated transmitter 15.231(b) Pass Conducted Emission test 15.207 N/A Antenna Requirement 15.203 Pass Note: Please note that the test results with statement of conformity, the decision rules which are based on: Safety Testing: the specification, standard or IEC Guide 115. Other Testing: the specification, standard and not taking into account the measurement uncertainty. Report No.: 240200122THC-001 GFT-OP-10h (28-Nov-2018) Page 5 of 19 TEST REPORT 1. General Information 1.1 Identification of the EUT Product: Remote Controller Model No.: FT1210ZW Operating Frequency: 433.92MHz Rated Power: DC 12V Power Cord: N/A Sample receiving date: 2024/02/22 Sample condition: Workable Test Date(s): 2024/06/06 ~ 2024/08/12 1.2 Antenna description Antenna Type : Printed Antenna Connector Type : Fixed Report No.: 240200122THC-001 GFT-OP-10h (28-Nov-2018) Page 6 of 19 TEST REPORT 1.3 Operation mode Press EUT button to transmit The signal is maximized through rotation and placement in the three orthogonal axes. X axis Y axis Z axis After verifying three axes, we found the maximum electromagnetic field was occurred at Y axis. The final test data was executed under this configuration. Frequency (MHz) Signal on time(ms) Signal on & off time(ms) Duty Cycle Duty Cycle factor 433.92 0.30 1.18 0.254 11.895 1.4 Peripherals equipment Peripherals Brand Model No. Serial No. Data cable Battery (Customer provided) ALLKEY N/A N/A N/A Report No.: 240200122THC-001 GFT-OP-10h (28-Nov-2018) Page 7 of 19 TEST REPORT 2. Radiated emission test FCC 15.231 (b) 2.1 Test setup & procedure 2.1.1 Radiated emission from 9kHz to 30MHz uses Loop Antenna: EUT & Peripheral 0.8m EMI Test Receiver □ 3 meters Loop Antenna 1m Report No.: 240200122THC-001 GFT-OP-10h (28-Nov-2018) Page 8 of 19 TEST REPORT 2.1.2 Radiated emission below 1GHz using Bilog Antenna 2.1.3 Radiated emission above 1GHz using Horn Antenna EMI Test Receiver 0.8m Antenna Tower Ground Plane Receiver Antenn…

Text truncated - open the document above for the full version.