2BHI2-ARSANCHPBluetooth headset

Successful Connection: Once successfully paired to your device, the LED indicator will turn off once successfully paired. Power On: Press and hold the power button for 3-5 seconds. the indicator light will briefly emit a blue light, followed by a flashing pattern of red and blue. Charging Status: Connecting a charger forces the device to power downautomatically. While charging, the red light will turn on. Previous Track: Press the button briefly to go back to the previous song. Power Off: Press and hold the power button for 3-5 seconds. The indicator light will briefly illuminate in red and then go out, accompanied by a "power off" voice prompt. Bluetooth headset

Groove Group Shantou Yihao Industrial Co., Ltd. Covered Equipment Certification Attestation Letter 7/6/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2BHI2-ARSANCHP Groove Group Shantou Yihao Industrial Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Groove Group Shantou Yihao Industrial Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Groove Group Shantou Yihao Industrial Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: JianLun Luo Title: Manager Company Name: Groove Group Shantou Yihao Industrial Co., Ltd. Date: 7/6/2026

[Groove Group Shantou Yihao Industrial Co., Ltd.] Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 12- 06- 2026 U.S. Agent Designation [Groove Group Shantou Yihao Industrial Co., Ltd.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BHI2-ARSANCHP) Name and company of U.S. agent: SOUTHERN TELECOM INC Physical U.S. address of agent: 5601 1 st Ave, 2 nd Floor, Brooklyn, NY 11220 FRN of U.S. agent: 0017985201 Email address of U.S. agent: [email protected] Telephone of U.S.agent: 718- 567- 7778 SOUTHERN TELECOM INC . acknowledges their obligation to accept servi ce of process on behalf of [Groove Group Shantou Yihao Industrial Co., Ltd.]. [Groove Group Shantou Yihao Industrial Co., Ltd.] with the FRN [0035671106] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involv ing the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements l isted under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notif y the FCC withi n 30 days via the granti ng TCB. Sincerely, Signature Signature JianLun Luo Lina Qian Director Director Groove Group Shantou Yihao Industrial Co., Ltd. SOUTHERN TELECOM INC

Groove Group Shantou Yihao Industrial Co., Ltd. DATE: 7/6/2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Tongzhou Testing Co.,Ltd. (1st Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Groove Group Shantou Yihao Industrial Co., Ltd. (Gounan Industrial Park, Gurao Town, Chaoyang district Shantou, Guangdong Sheng, China) <Signature> Name: JianLun Luo Title: Manager Applicant Company: Groove Group Shantou Yihao Industrial Co., Ltd.

Date: 7/6/2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, <Signature> Name: JianLun Luo Title: Manager Company: Groove Group Shantou Yihao Industrial Co., Ltd.

Date: 7/6/2026 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BHI2-ARSANCHP Product Name: Bluetooth headset Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name: JianLun Luo Title: Manager Company: Groove Group Shantou Yihao Industrial Co., Ltd.

Groove Group Shantou Yihao Industrial Co., Ltd. Gounan Industrial Park, Gurao Town, Chaoyang district Shantou, Guangdong Sheng, China Date: 2026/7/6 Dear Sir/Madam, We, Groove Group Shantou Yihao Industrial Co., Ltd., Hereby declares the following statement, PCB board, circuit, structure and internal of these model(s) are the same, Only model name is different for these model: FCC ID: 2BHI2-ARSANCHP Product name: Bluetooth headset Model no.: ARSANCHP, BSBTH31 Sincerely, Name/Title： JianLun Luo / Manager Company: Groove Group Shantou Yihao Industrial Co., Ltd. Address: Gounan Industrial Park, Gurao Town, Chaoyang district Shantou, Guangdong Sheng, China Phone: 8615220461333 Fax: N/A E-Mail: [email protected]

Report No.: TZ0029260606PH02 Page 1 of 3 External Photographs of EUT External Photo 1 External Photo 2 Report No.: TZ0029260606PH02 Page 2 of 3 External Photo 3 External Photo 4 Report No.: TZ0029260606PH02 Page 3 of 3 External Photo 5 External Photo 6

The size of the label is 15mm*10mm with White forecolor. The size of the logo is 5mm*5mm. FCC ID: 2BHI2-ARSANCHP

Report No.: TZ0029260606PH03 Page 1 of 3 Internal Photographs of EUT Internal Photo 1 Internal Photo 2 Report No.: TZ0029260606PH03 Page 2 of 3 Internal Photo 3 Internal Photo 4 Report No.: TZ0029260606PH03 Page 3 of 3 Internal Photo 5 Internal Photo 6 Bluetooth antenna

FCC ID: 2BHI2-ARSANCHP Page 1 of 2 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd RADIO FREQUENCY EXPOSURE Limit According to section B.4 of 447498 D04 Interim General RF Exposure Guidance v01 SAR-based thresholds are derived based on frequency, power, and separation distance of the RF source. The formula defines the thresholds in general for either available maximum time-averaged power or maximum time-averaged ERP, whichever is greater. If the ERP of a device is not easily determined, such as for a portable device with a small form factor, the applicant may use the available maximum time-averaged power exclusively if the device antenna or radiating structure does not exceed an electrical length of λ/4. As for devices with antennas of length greater than λ/4 where the gain is not well defined, but always less than that of a half-wave dipole (length λ/2), the available maximum time-averaged power generated by the device may be used in place of the maximum time-averaged ERP, where that value is not known. The separation distance is the smallest distance from any part of the antenna or radiating structure for all persons, during operation at the applicable ERP. In the case of mobile or portable devices, the separation distance is from the outer housing of the device where it is closest to the antenna. The SAR-based exemption formula of § 1.1307(b)(3)(i)(B), repeated here as Formula (B.2), applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power or effective radiated power (ERP), whichever is greater, of less than or equal to the threshold Pth (mW). This method shall only be used at separation distances from 0.5 cm to 40 cm and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by Formula (B.2). Where and f is in GHz, d is the separation distance (cm), and ERP 20cm is per Formula (B.1). FCC ID: 2BHI2-ARSANCHP Page 2 of 2 This report shall not be reproduced except in full, without the written approval of Shenzhen Tongzhou Testing Co.,Ltd Results RF Exposure at Separation distance (cm): 0.5 Mode Antenna Frequency [MHz] Conducted Power [dBm] Manufacturing tolerance Antenna Gain [dBi] Max of ERP and Conducted Power including Tune Up SAR- based exemption threshold Pth [mW] Target Power [dBm] Tolerance ±[dB] [dBm] [mW] DH5 Ant1 2402 -1.05 -1.5 1 2.499 -0.151 0.97 2.79 DH5 Ant1 2441 -0.34 -1 1 2.499 0.349 1.08 2.75 DH5 Ant1 2480 0.1 -0.5 1 2.499 0.849 1.22 2.72 2DH5 Ant1 2402 -0.28 -1 1 2.499 0.349 1.08 2.79 2DH5 Ant1 2441 0.44 0 1 2.499 1.349 1.36 2.75 2DH5 Ant1 2480 0.85 0.5 1 2.499 1.849 1.53 2.72 3DH5 Ant1 2402 0 -0.5 1 2.499 0.849 1.22 2.79 3DH5 Ant1 2441 0.73 0 1 2.499 1.349 1.36 2.75 3DH5 Ant1 2480 1.17 0.5 1 2.499 1.849 1.53 2.72 Max of ERP and Conducted Power including Tune Up (dBm) = Max Conducted Tune Up Power(dBm) and Max Conducted Tune Up Power(dBm) + Antenna Gain(dBi)-2.15), whichever is greater. The Maximum Erp is used for Routine Evaluation Exemption according to B.4 of 447498 D04 Interim General RF Exposure Guidance v01. So, the SAR evaluation is not required.

Report No.: TZ0029260606FRF01 Page 1 of 35 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Tongzhou Testing Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Tongzhou Testing Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report apply only to the specific sample(s) tested under stated test conditions. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. TEST REPORT Report Number : TZ0029260606FRF01 Product Name : Bluetooth headset Model/Type reference : ARSANCHP, BSBTH31 FCC ID : 2BHI2-ARSANCHP Prepared for : Groove Group Shantou Yihao Industrial Co., Ltd. Gounan Industrial Park, Gurao Town, Chaoyang district Shantou, Guangdong Sheng, China Prepared By : Shenzhen Tongzhou Testing Co.,Ltd. 1st Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China Standards : FCC CFR Title 47 Part 15C, ANSI C63.10-2020 + Cor.1-2023 Date of Test : 2026-06-15 ~ 2026-06-29 Date of Issue : 2026-06-30 Prepared by : Nancy Li Reviewed by : Allen Lai Approved by : Max Zhang (Authorized Officer) Report No.: TZ0029260606FRF01 Page 2 of 35 ** Report Revise Record ** Report Version Revise Time Issued Date Valid Version Notes V1.0 / 2026-06-30 Valid Initial release Report No.: TZ0029260606FRF01 Page 3 of 35 TABLE OF CONTENTS 1. G E N E R A L I N F O R M A T I O N ........................................................ 4 1.1. Client Information ................................................................................................................... 4 1.2. Description of Device (EUT) ................................................................................................... 4 1.3. Wireless Function Tested in this Report .............................................................................. 4 1.4. EUT configuration ................................................................................................................... 5 1.5. Description of Test Facility .................................................................................................... 5 1.6. Statement of the Measurement Uncertainty ......................................................................... 5 1.7. Measurement Uncertainty ...................................................................................................... 6 1.8. Description of Test Modes ..................................................................................................... 6 1.9. Frequency of Channels .......................................................................................................... 7 2. T E S T M E T H O D O L O G Y ............................................................ 8 2.1. EUT Configuration .................................................................................................................. 8 2.2. EUT Exercise ........................................................................................................................... 8 2.3. Test Sample ............................................................................................................................. 8 3. S Y S T E M T E S T C O N F I G U R A T I O N .............................................. 9 3.1. Justification ............................................................................................................................. 9 3.2. EUT Exercise Software ........................................................................................................... 9 3.3. Special Accessories ............................................................................................................... 9 3.4. Block Diagram/Schematics .................................................................................................... 9 3.5. Equipment Modifications ....................................................................................................... 9 3.6. Test Setup ................................................................................................................................ 9 4. S U M M A R Y O F T E S T R E S U L T S ................................................ 10 5. M E A S U R E M E N T R E S U L T S ...................................................... 11 5.1. Maximum Peak Conducted Output Power ......................................................................... 11 5.2. Frequency Separation and 20 dB Bandwidth .................................................................... 12 5.3. Number of Hopping Frequency ........................................................................................... 13 5.4. Time of Occupancy (Dwell Time) ......................................................................................... 14 5.5. Conducted Spurious Emissions and Band Edges Test .................................................... 16 5.6. Restricted Band Emission Limit .......................................................................................... 17 5.7. AC Power line conducted emissions .................................................................................. 26 5.8. Band-edge measurements for radiated emissions ........................................................... 29 5.9. Pseudorandom frequency hopping sequence ................................................................... 32 5.10. Antenna requirement ............................................................................................................ 33 6. S U M M A R Y O F T E S T E Q U I P M E N T ............................................ 34 7. T E S T S E T U P P H O T O G R A P H S ................................................. 35 8. E X T E R N A L P H O T O S O F T H E E U T .......................…

Text truncated - open the document above for the full version.

Shenzhen Ouchao Technology Co., Ltd 303, Building 34, Longzhu Garden, Xixiang Street, Bao’an District, Shenzhen, China. SPECIFICATIONS Frequency（MHz） 2400-2480 Peak Gain（dBi） 2.499 Average Gain（dBi） ＞-4 VSWR ＜3.2 Impedance（Ω） 50Ω Antenna Type Plannar Inverted F Antenna on board Polarization Linear Test environment: Zhongke Guoji Darkroom testing system Z X Y Physical and physical dimensions of the antenna Passive antenna S-parameters： 驻波比（VSWR）、回波损耗（Return Loss）及史密斯圆图(Smith's circular chart) Antenna efficiency and gain Frequency（MHz） Gain（dBi） Effciency（%） AverageGain（dBi） Efficiency（dB） 2400 1.433 59.329% -2.717 -2.267 2410 0.927 51.861% -3.416 -2.852 2420 0.829 52.112% -3.166 -2.831 2430 0.881 49.299% -3.258 -3.072 2440 1.192 50.672% -3.144 -2.952 2450 1.688 53.067% -2.735 -2.752 2460 2.194 59.423% -2.276 -2.260 2470 2.118 56.680% -2.438 -2.466 2480 2.499 61.727% -2.112 -2.095 Average 1.529 54.908% -2.806 -2.616 Peak 2.499 61.727% -2.112 -2.095 2440MHz 2D-Theta Pattern 2440MHz 2D-Phi Pattern 2440MHz 3D-Horizontal Pattern 2440MHz 3D-Vertical Pattern 2440MHz 3D-Total Pattern

Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 1 of 56 Appendix Test Data for BT(BDR/EDR) (Conducted Measurement) Product Name: Bluetooth headset Trade Mark: Brookstone, Art and Sound, Audio Republic, Hurley, Von Dutch, Colorways Test Model: ARSANCHP FCC ID: 2BHI2-ARSANCHP Environmental Conditions Temperature: 23.5°C Relative Humidity: 58% ATM Pressure: 100.0 kPa Test Engineer: Allen Lai Supervised by: Max Zhang NOTE N/A Appendix A: 20dB Emission Bandwidth Test Result Test Mode Antenna Frequency [MHz] 20db EBW [MHz] FL [MHz] FH [MHz] Limit [MHz] Verdict DH5 Ant1 2402 0.930 2401.595 2402.525 --- --- DH5 Ant1 2441 0.954 2440.589 2441.543 --- --- DH5 Ant1 2480 0.957 2479.592 2480.549 --- --- 2DH5 Ant1 2402 1.323 2401.394 2402.717 --- --- 2DH5 Ant1 2441 1.278 2440.427 2441.705 --- --- 2DH5 Ant1 2480 1.290 2479.424 2480.714 --- --- 3DH5 Ant1 2402 1.311 2401.403 2402.714 --- --- 3DH5 Ant1 2441 1.299 2440.418 2441.717 --- --- 3DH5 Ant1 2480 1.281 2479.412 2480.693 --- --- Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 2 of 56 Test Graphs DH5-Ant1-2402 DH5-Ant1-2441 Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 3 of 56 DH5-Ant1-2480 2DH5-Ant1-2402 Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 4 of 56 2DH5-Ant1-2441 2DH5-Ant1-2480 Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 5 of 56 3DH5-Ant1-2402 3DH5-Ant1-2441 Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 6 of 56 3DH5-Ant1-2480 Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 7 of 56 Appendix B: Occupied Channel Bandwidth Test Result Test Mode Antenna Frequency [MHz] OCB [MHz] FL [MHz] FH [MHz] Limit [MHz] Verdict DH5 Ant1 2402 0.88018 2401.6169 2402.4971 --- --- DH5 Ant1 2441 0.86869 2440.6222 2441.4909 --- --- DH5 Ant1 2480 0.86459 2479.6252 2480.4898 --- --- 2DH5 Ant1 2402 1.1822 2401.4690 2402.6512 --- --- 2DH5 Ant1 2441 1.1899 2440.4629 2441.6528 --- --- 2DH5 Ant1 2480 1.1918 2479.4629 2480.6547 --- --- 3DH5 Ant1 2402 1.1949 2401.4590 2402.6539 --- --- 3DH5 Ant1 2441 1.1899 2440.4643 2441.6542 --- --- 3DH5 Ant1 2480 1.1981 2479.4564 2480.6545 --- --- Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 8 of 56 Test Graphs DH5-Ant1-2402 DH5-Ant1-2441 Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 9 of 56 DH5-Ant1-2480 2DH5-Ant1-2402 Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 10 of 56 2DH5-Ant1-2441 2DH5-Ant1-2480 Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 11 of 56 3DH5-Ant1-2402 3DH5-Ant1-2441 Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 12 of 56 3DH5-Ant1-2480 Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 13 of 56 Appendix C: Maximum peak conducted output power Test Result Test Mode Antenna Frequency [MHz] Conducted Peak Power [dBm] Conducted Limit [dBm] Verdict DH5 Ant1 2402 -1.05 ≤30 PASS DH5 Ant1 2441 -0.34 ≤30 PASS DH5 Ant1 2480 0.10 ≤30 PASS 2DH5 Ant1 2402 -0.28 ≤20.97 PASS 2DH5 Ant1 2441 0.44 ≤20.97 PASS 2DH5 Ant1 2480 0.85 ≤20.97 PASS 3DH5 Ant1 2402 0.00 ≤20.97 PASS 3DH5 Ant1 2441 0.73 ≤20.97 PASS 3DH5 Ant1 2480 1.17 ≤20.97 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 14 of 56 Test Graphs DH5-Ant1-2402-PASS DH5-Ant1-2441-PASS Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 15 of 56 DH5-Ant1-2480-PASS 2DH5-Ant1-2402-PASS Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 16 of 56 2DH5-Ant1-2441-PASS 2DH5-Ant1-2480-PASS Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 17 of 56 3DH5-Ant1-2402-PASS 3DH5-Ant1-2441-PASS Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 18 of 56 3DH5-Ant1-2480-PASS Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 19 of 56 Appendix D: Carrier frequency separation Test Result Test Mode Antenna Frequency [MHz] Result [MHz] Limit [MHz] Verdict DH5 Ant1 Hop 0.972 ≥0.957 PASS 2DH5 Ant1 Hop 0.986 ≥0.882 PASS 3DH5 Ant1 Hop 1 ≥0.874 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 20 of 56 Test Graphs DH5-Ant1-Hop-PASS 2DH5-Ant1-Hop-PASS Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 21 of 56 3DH5-Ant1-Hop-PASS Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 22 of 56 Appendix E: Time of occupancy Test Result Test Mode Antenna Frequency [MHz] Burst Width [ms] TotalHops [Num] Result [s] Limit [s] Verdict DH5 Ant1 Hop 2.887 110 0.318 ≤0.4 PASS 2DH5 Ant1 Hop 2.892 80 0.231 ≤0.4 PASS 3DH5 Ant1 Hop 2.894 110 0.318 ≤0.4 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 23 of 56 Test Graphs DH5-Ant1-Hop-PASS Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 24 of 56 2DH5-Ant1-Hop-PASS Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 25 of 56 3DH5-Ant1-Hop-PASS Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 26 of 56 Appendix F: Number of hopping channels Test Result Test Mode Antenna Frequency [MHz] Result [Num] Limit [Num] Verdict DH5 Ant1 Hop 79 ≥15 PASS 2DH5 Ant1 Hop 79 ≥15 PASS 3DH5 Ant1 Hop 79 ≥15 PASS Note: offset(dB) = cable loss(dB) + attenuator factor(dB) Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 27 of 56 Test Graphs DH5-Ant1-Hop-PASS 2DH5-Ant1-Hop-PASS Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 28 of 56 3DH5-Ant1-Hop-PASS Appendix Test Data of the Report No.: TZ0029260606FRF01 Page 29 of 56 Appendix G: Band edge measurements Test Result Test Mode Antenna Ch.Name Frequency [MHz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict DH5 Ant1 Low 2402 -1.60 -48.79 ≤-21.6 PASS DH5 Ant1 High 2480 -0.44 -47.83 ≤-20.44 PASS DH5 Ant1 Low Hop_2402 -1.75 -48.52 ≤-21.75 PASS DH5 Ant1 High Hop_2480 -0.74 -47.94 ≤-20.74 PASS 2DH5 Ant1 Low 2402 -2.85 -48…

Text truncated - open the document above for the full version.

Report No.: TZ0029260606PH01 Page 1 of 2 Test Setup Photos of the EUT Conducted Emission Radiated Emission Below 1GHz Report No.: TZ0029260606PH01 Page 2 of 2 Radiated Emission Above 1GHz RF Conducted Test