2BHMN-ORBIT1Dash Cam

FREOXYINC 2.911(d)(5)(i)EquipmentTypeAttestationv1.2 Section2.911(d)(5)(i)Certification–EquipmentType Companyname:FREOXYINC Address:9711WASHINGTONIANBLVDSTE550GAITHERSBURG,MARYLAND,UNITED STATES.20878-5789 ProductName:DashCam FCCID:2BHMN-ORBIT1 Model(s):Orbit1,Orbit2,Orbit3,Scope1,Scope2,Scope3,Stellum1,Stellum2,Stellum3,V10, V20,V30,V100,V200,V300 2.911(d)(5)(i)EquipmentType We,[FREOXYINC](“theapplicant”)certifythattheequipmentforwhichauthorizationissought throughcertificationisnot:  Prohibitedfromreceivinganequipmentauthorizationpursuantto§2.903;oftheFCCrules.  Identifiedasanequipmenttypeinthe“CoveredList” NOTE1 Yourssincerely, Name:VictorLuDate:2024.9.18 TitleandCompanyname:Manager/FREOXYINC NOTE1 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

FREOXYINC 2.911(d)(5)(ii)ApplicantAttestationv1.3 Section2.911(d)(5)(ii)Certification–Applicant(CoveredList) Companyname:FREOXYINC Address:9711WASHINGTONIANBLVDSTE550GAITHERSBURG,MARYLAND,UNITED STATES.20878-5789 ProductName:DashCam FCCID:2BHMN-ORBIT1 Model(s):Orbit1,Orbit2,Orbit3,Scope1,Scope2,Scope3,Stellum1,Stellum2,Stellum3,V10, V20,V30,V100,V200,V300 2.911(d)(5)(ii)Applicantfiling We,[FREOXYINC](“theapplicant”)certifythat,asofthedateofthefilingoftheapplication,the applicantisnotidentified NOTE1 onthe“CoveredList” NOTE2 ,establishedpursuantto§1.50002of thischapter,asanentityproducingcoveredcommunicationsequipment. Yourssincerely, Name:VictorLuDate:2024.9.18 TitleandCompanyname:Manager/FREOXYINC NOTE1 Deleteoptionnotapplicabletothisapplication. NOTE2 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

FREOXY INC 2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name: FREOXY INC Address: 9711 WASHINGTONIAN BLVD STE 550 GAITHERSBURG, MARYLAND, UNITED STATES.20878-5789 Product Name: Dash Cam FCC ID:2BHMN-ORBIT1 Model(s): Orbit 1, Orbit 2, Orbit 3, Scope 1, Scope 2, Scope 3, Stellum 1, Stellum 2, Stellum 3, V10, V20, V30, V100, V200, V300 2.911(d)(7) USA Designated Agent for Service of Process We, [FREOXY INC] (“the applicant”) designate [FREOXY INC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: FREOXY INC USA Address: 9711 WASHINGTONIAN BLVD STE 550 GAITHERSBURG, MARYLAND, UNITED STATES.20878-5789 FRN Number0035694603 Contact Name: Victor Lu Telephone No: 001 181 2368 Email: [email protected] Applicant Company name: FREOXY INC Address: 9711 WASHINGTONIAN BLVD STE 550 GAITHERSBURG, MARYLAND, UNITED STATES.20878-5789 Grantee FRN Number: 0035694603 FCC Grantee Code: 2BHMN Contact Name: Victor Lu Telephone No: 001 181 2368 Email: [email protected] FREOXY INC 2.911 (d)(7)USA Agent v1.5 Signature: Title: Manager Signature: Title: Manager Date: 2024-09-13 Date: 2024-09-13 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

FREOXYINC AgentAuthorization Company:FREOXYINC Address:9711WASHINGTONIANBLVDSTE550GAITHERSBURG,MARYLAND, UNITEDSTATES.20878-5789 ProductName:DashCam ModelNumber(s):Orbit1,Orbit2,Orbit3,Scope1,Scope2,Scope3,Stellum1, Stellum2,Stellum3,V10,V20,V30,V100,V200,V300 ProductDescription:DashCam WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown. Signature:Date:2024.9.18 Name:VictorLu Title:Manager Company:FREOXYINC

FREOXY INC Model Difference Product description: Dash Cam Model name: Orbit 1, Orbit 2, Orbit 3, Scope 1, Scope 2, Scope 3, Stellum 1, Stellum 2, Stellum 3, V10, V20, V30, V100, V200, V300 Trade Name: N/A FCC ID:2BHMN-ORBIT1 Only the model name is different. Regards Sincerely Client’s signature: Client’s name / title: Victor Lu / Manager Contact information / address: 9711 WASHINGTONIAN BLVD STE 550 GAITHERSBURG, MARYLAND, UNITED STATES.20878-5789

FREOXYINC OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:2024.9.18 Subject;RequestforConfidentiality FCCID:2BHMN-ORBIT1 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:VictorLu Title:Manager

EUT PHOTO(External Photos)

Label & label location 20mm*10mm FCC ID:2BHMN-ORBIT1 Label location

EUT PHOTO(Internal Photos) ANT

FCC ID:2BHMN-ORBIT1 RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation WI-FI mode Mode Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11b 14.416 27.64 0.01257 1.0 PASS 802.11g 13.365 21.70 0.00987 1.0 PASS 802.11n20 12.188 16.55 0.00753 1.0 PASS Antenna gain = 3.59dBi

1 /6 2.4GHz 5 221ChipAntenna:RANT5221F245M02 1. Applications WLAN ,80 2.11 b/g, Bl uetoot h , WLAN ,etc ... 2. F eatu r es S MD , hi g hr e li ab ili ty,u l t r a Im pact,O mni- d ir ect i o n a l... 3. PartNumberInformation RANT5221F245M02 (A)(B)(C)(D)(E)(F) (A)Produc t Ty p eChi p An t enna (B)SizeCode 5 .0x2.0mm ( ± 0 .2mm ) (C)MaterialHighKmaterial (D)Frequency2.4~2.5GHz (E)FeedingmodePIFA& S ingl e F eed ing (F)AntennatypeType=02 咏成國際科技有限 公 司 RAINInternationalTechnologyCo.,Ltd. 2 /6 4. 00 2.3000 4.产品尺寸 5020单极天线 5.ElectricalSpecification Specification PartNumber RANT5221F245M02 CentralFrequency 2450 MHz Bandwidth120(Min.) MHz ReturnLoss -10(Max) dB PeakGain 3.5 9dBi Impedance 50Ohm OperatingTemperature - 40～+85 °C MaximumPower4W ResistancetoSolderingHeats 10(@260°C) sec. PolarizationLinear AzimuthBeamwidth Omni-directional TerminationSn(Leadless) 6. 推荐PCB FootPrint(Unit:mm) W Figure SymbolDimension(mm) L W A L（长） 5.00±0.20 W（宽） 2.00±0.30 T（厚度） 1.0±0.30 A （电极宽度） 0.50±0.20 4.0 3 /6 330 30 -10 -20 300 60 -30 -40 240120 210150 -X 180 0 0[dBd] 330 30 -10 -20 300 60 -30 -40 +Y 240120 210150 -X 180 7.MeasurementResults ReturnLoss 7.2RadiationPattern - X -X -Y +Z +X - +X - ： ： -Y 270 - Y 90 270 90 +Y +Z +Y 0 0[dBd] 4 /6 260 °C 20-40s 217°C 150-200°C Pre-heating 60-150s 60-180s Time(s) 8.ReliabilityandTestCondictions Testitem Testcondition/Testmethod Specification Solderability JISC0050-4.6 JESD22-B102D *Solderbathtemperature：2355C *Immersiontime：20.5sec Solder：Sn3Ag0.5Cuforlead-free Atleast95%ofasurfaceofeachterminal electrodemustbecoveredbyfreshsolder. Leaching (Resistanceto dissolutionof metallization) IEC60068-2-58 *Solderbathtemperature：2605C *Leachingimmersiontime：30 0.5sec Solder:SN63A Lossofmetallizationontheedgesofeach electrodeshallnotexceed25%. Bendingtest JISC0051-7.4.1 Themiddlepartofsubstrateshallbe pressurizedbymeansofthepressurizingrod atarateofabout1mm/sperseconduntilthe deflectionbecomes1mm/sandthenpressure shallbemaintainedfor51sec. Measurementtobemadeafterkeepingat roomtemperaturefor242hours Nomechanicaldamage. Electricalspecificationshallsatisfythe descriptionsinelectricalcharacteristicsunder theoperationaltemperaturerangewithin-40 ~85°C. Resistancetosoldering heat JISC0050-5.4 *Preheatingtemperature：120~150 °C , 1minute. *Soldertemperature：2705C *Immersiontime：101sec Solder：Sn3Ag0.5Cuforlead-free Measurementtobemadeafterkeepingat roomtemperaturefor242hrs Nomechanicaldamage. Electricalspecificationshallsatisfythe descriptionsinelectricalcharacteristicsunder theoperationaltemperaturerangewithin-40 ~85°C. Lossofmetallizationontheedgesofeach electrodeshallnotexceed25%. 9.SolderingandMounting T e m p e r a t u r e ( ° C ) 5 /6 10.天线应用注意事项 如果空间允许，最好不要选择太小尺寸的天线。  最好天线与附近物体之间有较大的净空区；否则匹配调节将会变得困难，辐射模式会受到严重扭曲。 天线的下方不应出现线路布局、接地层。  天线不应和金属物体放置太近，比如电池、芯片等，不应与电池等金属物有重叠。  注意内部缆线（如电池电源线）最好不要太靠近天线。  单极天线需要有合理的接地面才能发挥最好效果。  在最终产品方案上进行天线匹配，可以减短调节周期；而在光板上往往需要反复调节。  如果没有经过匹配，相同的天线放置完全不一样的布局板上可能无法正常工作。 不要使用金属外壳或带金属的塑料外壳盖在天线周围。  不要使用很细的天线馈电线，馈线应有一定的宽度，不应小于 0.1mm 。  根据PCB 的厚度和介电常数计算馈线阻抗， 50 欧姆会使天线调节较为容易  片式天线装配应尽可能远离电池、EMI防护材料、折叠扬声器、金属镙钉、 LCD 显示屏等。 11.StorageandTransportationInformation StorageConditions Tomaintainthesolderabilityofterminalelectrodes: 1.Temperatureandhumidityconditions:-10~40 °C and30~70%RH. 2.Recommendedproductsshouldbeusedwithin6monthsfromthetimeof delivery. 3.Thepackagingmaterialshouldbekeptwherenochlorineorsulfurexists intheair. TransportationConditions 1.Productsshouldbehandledwithcaretoavoiddamageorcontamination fromperspirationandskinoils. 2.Theuseoftweezersorvacuumpickupisstronglyrecommendedfor individualcomponents. 3.Bulkhandlingshouldensurethatabrasionandmechanicalshockare minimized. 6 /6 FeatureSpecificationsTolerances W12.00±0.30 P4.00±0.10 E1.75±0.10 F 5.50±0.10 P2 2.00±0.10 D 1.50 +0.10 -0.00 Po4.00±0.10 10Po40.00±0.20 12.Packing (1)Quantity/Reel:2000pcs/Reel (2)Plastictape: a.TapeDrawingb.TapeDimensions(unit:mm) c. R eelDrawing

Project No.: ZKT-2407118057E Page 1 of 52 FCC TEST REPORT FCC ID:2BHMN-ORBIT1 Report Number. .............................. : ZKT-2407118057E Date of Test ................................................. : Jul. 11, 2024 to Sep. 12, 2024 Date of issue .................................... : Sep. 12, 2024 Total number of pages ...................... 52 Test Result ....................................... : PASS Testing Laboratory. ........................ : Shenzhen ZKT Technology Co., Ltd. Address .......................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name ......................... : FREOXY INC Address .......................................... : 9711 WASHINGTONIAN BLVD STE 550 GAITHERSBURG, MARYLAND, UNITED STATES.20878-5789 Manufacturer's name ................... : Shenzhen Vycol-Glint Innovations Technology Co., Ltd Address .......................................... : NO.26 Gangsheng Road. Building A, Room 509 Bao’an District, Shenzhen, Guangdong, China. Test specification: Standard .......................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2013 Test procedure ................................. : / Non-standard test method ............. : N/A Test Report Form No. .................... : TRF-EL-110_V0 Test Report Form(s) Originator .... : ZKT Testing Master TRF .................................... : Dated: 2020-01-06 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name ................................. : Dash Cam Trademark ...................................... : N/A Model/Type reference ...................... : Orbit 1 Orbit 2, Orbit 3, Scope 1, Scope 2, Scope 3, Stellum 1, Stellum 2, Stellum 3, V10, V20, V30, V100, V200, V300 Ratings ............................................. : Input: 5V 1500mA From adapter Project No.: ZKT-2407118057E Page 2 of 52 Testing procedure and testing location: Testing Laboratory ................................... : Shenzhen ZKT Technology Co., Ltd. Address ...................................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Jim Liu Tested by (name + signature) .................... : Jackson Fang Reviewer (name + signature) ..................... : Lake Xie Approved (name + signature) .................... : Project No.: ZKT-2407118057E Page 3 of 52 Table of Contents Page 1. VERSION ............................................................................................................... 5 2. SUMMARY OF TEST RESULTS ........................................................................... 6 2.1 TEST FACILITY ................................................................................................................ 7 2.2 MEASUREMENT UNCERTAINTY ................................................................................... 7 3. GENERAL INFORMATION ................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ................................................................................. 8 3.2 DESCRIPTION OF TEST MODES ................................................................................... 9 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED ............. 10 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) ...................................... 10 3.5EQUIPMENTS LIST FOR ALL TEST ITEMS .................................................................. 11 4. EMC EMISSION TEST ........................................................................................ 13 4.1 CONDUCTED EMISSION MEASUREMENT ................................................................. 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS ....................................................... 13 4.1.2 TEST PROCEDURE .................................................................................................... 13 4.1.3 DEVIATION FROM TEST STANDARD ....................................................................... 13 4.1.4 TEST SETUP ............................................................................................................... 14 4.1.5 EUT OPERATING CONDITIONS ................................................................................ 14 4.1.6 TEST RESULT ............................................................................................................. 14 4.2.1 RADIATED EMISSION LIMITS ................................................................................... 15 4.2.2 TEST PROCEDURE .................................................................................................... 15 4.2.3 DEVIATION FROM TEST STANDARD ....................................................................... 16 4.2.4 TEST SETUP ............................................................................................................... 16 4.2.5 EUT OPERATING CONDITIONS ................................................................................ 17 4.2.6 TEST RESULTS .......................................................................................................... 17 5.1 TEST REQUIREMENT: .................................................................................................. 26 5.2 TEST PROCEDURE ....................................................................................................... 26 5.3 DEVIATION FROM TEST STANDARD ........................................................…

Text truncated - open the document above for the full version.

EUT TEST PHOTO