2BHQN-EPSBAE20Outdoor Soundbar

FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT1 USER MANUAL EPSBAE20 2.0 Outdoor Sound Bar USER MANUAL2FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT3 WHAT’S INCLUDED FOR YOUR ATTENTION ï Please read through this manual before making connections and operating your new sound bar. Retain this manual for future reference. ï Do not open the cabinet of this unit; there are no user-serviceable parts inside. supply when not in use for an extended period of time. ï Do not install the unit in direct sunlight but an area that is partially shaded. Choos e a location should not be placed on top of the unit. which will cause malfunction, resulting from overheating. ï Where the main plu g i s used as the di sconnect device, the disconnect device shall r emain readily o perable. WARNING: within the productís enclosure, and touching the internal components may result in a risk of electric shock. operating instructions. Your new sound bar! Power adapter 2 Iron pendants Remote controlHDMI cable 6 mounting screws and 6 expansion tubes 2 short screws 3.5 to RCA USER MANUAL4FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT5 MOUNTI NG YOUR SOUND BAR IMPORTANT: Choose a location for your sound bar where it will not be in direct sunlight and is partially shaded (i.e. near trees, under structures, patio cover, etc.). Re- member that the position of the sun changes throughout the day, so choos e a location WARNING: or other body of water. MOUNTING YOUR SOUND BAR (continued) e c en ter d is tan c e is 29.56 in. Mark the location of the screws on the wall. Drill two hole s in the wall with a powerful drill. Fasten the screw expansion tube to the hole in the wall. Fasten the iron bracket to the expansion tube of the wall with screws. 1 2 3 4 5 6 USER MANUAL6FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT7 SOUND BAR PANELS (continued) SOUND BAR PANELS ARC input port: Connect to a TV with HDMI ARC function. AUX input port: Connect the AUX one-to-two audio cable, connect with the red/white output port of the audio source device. Power interface: Connect the power adapter. 8 9 10 910 Back INDICATOR LIGHT DISPLAY: Red light: Standby mode Blue light: BT mode Green light: ARC mode White light: AUX mode 4 1 5 2 6 3 7 ON/OFF Volume Function Switching ARC input portAUX input portPower interface Indicator light 8 USER MANUAL8FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT9 CONNECT TO YOUR TV CONNECTIONS 21 AUX Good Quality (cable not included) ARC input port: Best Quality (cable included) 1 2 Ensure HDMI CEC is ON If you choos e the ARC connection, please make sure your TV or device supports the HDMI ARC feature. ARC is an audio return channel function for digital audio. Use the supplied ARC cable to connect to the HDMI ARC input of your sound bar and the HDMI ARC output on your TV or other external device. Note that the external device audio output must be set to PCM manually. See your TV us er manual for details. ARC (AUDIO RETURN CHANNEL) Connect your sound bar to your TV or other external devices such as a CD, VCR, DVD player, etc. by connecting an AUX input cable (cable not included) to your sound bar and the AUX output of your external device. Press button on the remote control to switch to the AUX input mode. LINE will show on the display screen which means AUX mode is selected. AUX Power adapter USER MANUAL10FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT11 + _ + _ Remove the battery compartment cover on the back of the remote. Load two AAA/1.5V batteries into the battery compartment making sure that the battery has been ins erted with the correct polarities matching the symbols +, - as indicated inside the battery compartment. Replace the cover. Place remote inside protective sleeve for added protection against falls or your remote indoors when not in use. Battery installation Protective remote sleeve REMOTE CONTROL Ins ert the batteries into the remote control. Point the remote control at a distance of about 8 meters from the sensor and within an angle of Remote contro l operation NOTE: ï Remove the battery when you do not intend to use the remote control for a long time. ï Weak battery can leak and severely damage the remote control. ex cessive heat source, such as sunshine, raise the temperature of the battery. ï Be environmentally friendly and dispose of batteries according to local government regulations. REMOTE CONTROL (continued) MOVIE MUSIC NEWS AUXARC PAIR POWER BT Remote control or host button to switch the signal source to BT state, the blue indicator - tooth, search for the device, and the connec- tion and pairing are succ essful. MUTE SOUND EFFECTS MOV: movie mode MUS: music mode NEWS: news mode AUDIO SOURCE SELECTION Sound source selection key, RGB light cor- responding status ìARC,AUXî indicates that the corresponding input soundsource on the backplane has entered he working state. PAIR Tap to disconnect BT, then tap to link BT. 1 2 3 4 5 6 POWER BT MUTE SOUND EFFECTS AUDIO SOURCE SELECTION PAIR 1 2 3 4 5 6 USER MANUAL12FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT13 TROUBLESHOOTING Use the chart below to troubleshoot any issues you may be having. If you do not see your issue listed below, or the troubleshooting guide does not solve your issue, please contact Element customer support. SYMPTOMCAUSEREMEDY No Powerï AC power cord is not connected to a power supply securely ï Check that the AC power cord is connected securely the sound is distorted ï Connect the audio cables securely. ï Turn up the volume ï Press [MUTE] on the remote control to switch on the sound ï Press [PLAY/PAUSE] does not function ï Install two AAA/1.5V batteries in it ï Replace the battery with new one ï Make sure that the remote control is pointed to the remote control sensor ï Make sure the remote control is within the operating area from the AC outlet, then power on the unit again SOUND BAR SPECIFICATIONS SOUND BAR POWER SUPPLY AC ~100-240V, 50/60Hz RELATIVE HUMIDITY 5% ~ 90% FREQUENCY RESPONSE 60Hz~20kHz TEMPERATU…

Text truncated - open the document above for the full version.

Attestation Statements 8/8/2024 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for 2BHQN-EPSBAE20 Dongguan LU Hong electroacoustic technology Co., Ltd., the undersigned, hereby authorize THREE STONES MEDIA LLC to act as our designated U.S. agent for service of process, Dongguan LU Hong electroacoustic technology Co., Ltd.accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. THREE STONES MEDIA LLC accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information： Company name: Dongguan LU Hong electroacoustic technology Co., Ltd. Contact Name: Chuan Qing Address: No.1, Kailin Road, Shuibei Industrial Zone, Shipai Town, Dongguan City China FRN: 0035707785 Telephone No: 18675537901 Email: [email protected] Signature [Chuan Qing] U.S. Agent Information: Company Name: THREE STONES MEDIA LLC Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN: 0033401761 Contact Name: Sijie Zhang Telephone No: +1 267 909 3692 Email: [email protected] Signature [Sijie Zhang]

Dongguan LU Hong electroacoustic technology Co., Ltd. 2024-07-24 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2BHQN-EPSBAE20 ) [Dongguan LU Hong electroacoustic technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Chuan Qing Manager Dongguan LU Hong electroacoustic technology Co., Ltd. No.1, Kailin Road, Shuibei Industrial Zone, Shipai Town, Dongguan City Dongguan LU Hong electroacoustic technology Co., Ltd. 2024-07-24 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for(FCC ID: 2BHQN-EPSBAE20) [Dongguan LU Hong electroacoustic technology Co., Ltd. ] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Chuan Qing Manager Dongguan LU Hong electroacoustic technology Co., Ltd. No.1, Kailin Road, Shuibei Industrial Zone, Shipai Town, Dongguan City

External Photographs View of EUT-1 View of EUT-2 Page 2 of 5 View of EUT-3 View of EUT-4 Page 3 of 5 View of EUT-5 View of EUT-6 Page 4 of 5 View of EUT-7 View of EUT-8 Page 5 of 5 View of EUT-9 View of EUT-10

L90xW50mm 90mm 50mm This device complies with Part 15 of the FCC Rules. Operation is subiect to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3 (B) Made in China 2.0CH SOUNDBAR MODEL: EPSBAE20 FCC ID : 2BHQN-EPSBAE20 Power Supply: DC 24V 3A,72W

Internal Photographs Internal View of EUT-1 Internal View of EUT-2 Page 2 of 5 Internal View of EUT-3 Internal View of EUT-4 Page 3 of 5 Internal View of EUT-5 Internal View of EUT-6 Page 4 of 5 Internal View of EUT-7 Internal View of EUT-8 Page 5 of 5 Internal View of EUT-9 Internal View of EUT-10 Antenna

RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in ß1.1307(b) FCC ID: 2BHQN-EPSBAE20 EUT Specification EUT Outdoor Soundbar Frequency band (Operating) BT: 2.402GHz ~ 2.480GHz Device category Portable (<20cm separation) Mobile (>20cm separation) Exposure classification Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power（peak power） 2.66dBm Antenna gain (Max) 3.38dBi Evaluation applied MPE Evaluation SAR Evaluation Limits for Maximum Permissible Exposure(MPE) Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density(mW/cm 2 ) Average Time (A) Limits for Occupational/Control Exposures 300-1500 -- -- F/300 6 1500-100000 -- -- 5 6 (B) Limits for General Population/Uncontrol Exposures 300-1500 -- -- F/1500 6 1500-100000 -- -- 1 30 Friis transmission formula: P d =(P out *G)\(4*pi*R 2 ) Where P d = Power density in mW/cm 2 , P out =output power to antenna in mW. G= gain of antenna in linear scale, Pi=3.1416 R= distance between observation point and center of the radiator in cm=20cm P d the limit of MPE, 1mW/cm 2 . If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Measurement Result BT: Mode Max Measured Power (dBm) Tune up tolerance (dBm) Max tune up conducted power(dBm) Output Peak power (mW) Ant. Gain (dBi) Ant. Gain (numeric) Power density at 20cm (mW/ cm 2 ) Power density Limits (mW/ cm 2 ) 3DH5 2.66 2±1 3 1.995 3.38 2.178 0.00086 1 The Product unsupported at the same time to Transmitting. According to KDB 447498, and no simultaneous SAR measurement is required. Signature: Shawn Wen Date: 2024-7-8

N c v NOTE: This doc company. The te validation and in MORLA App PRO MO TRA BRA STA REC TES ISS cument is issue est results appl nformation confi AB SHENZ FL1-3, B Block67 plicant ODUCT NA ODEL NAM ADE NAM AND NAM ANDARD(S CEIPT DAT ST DATE SUE DATE ed by MORLAB y only to the pa rmed at our we ZHEN MORLAB COM Building A, FeiYang S 7, BaoAn District, She TE : AME : ME : E : ME : S) : ATE : : : B, the test repo articular sample bsite. MMUNICATIONS TEC Science Park, No.8 L enZhen , GuangDon EST SHANGHA MV_BP10 MV_BP10 MVSILICO MVSILICO ANSI/IEEE 2019-08-3 2019-09-0 2019-10-1 Edited Approved rt shall not be e(s) tested and CHNOLOGY Co., Ltd LongChang Road, g Province, P. R. Ch T RE AI MOUNT 0xx PCB An 0 ON ON E Std 149- 30 02 15 d by: by: reproduced exc to the specific d. ina Te l : 8 Http:/ RE EPOR TAIN VIEW ntenna -2008 Chi Sh Andy Yeh cept in full with tests carried o u 86-755-36698555 //www.morlab.cn EPORT No RT W SILICON ide(Rappo h(Technica out prior written ut which is avai Fax: 86-755-3669 E-mail: service@ o.：SZ190 CO,. LTD orteur) l Director) n permission of lable on reques 98525 @morlab.cn Page 1 of 1 080340E01 f the st for 4 1 MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 14 REPORT No.：SZ19080340E01 DIRECTORY 1. Technical Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.1. Manufacturer and Factory Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.2. Equipment Under Test (EUT) Description ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 2. Test Results ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 2.1. Applied Reference Documents ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 2.2. Test Conditions ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 2.3. Test Results lists ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 Annex A Photographs ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 6 Annex B Figures ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 1. 2D Radiation Pattern ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 2. 3D Radiation Pattern ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 9 3. Return Loss ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 10 4. VSWR ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 11 5. Input Impedance ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 11 Annex C Photographs ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 12 Annex D General Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 14 1.1 Identification of the Responsible Testing Laboratory ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 14 1.2 Identification of the Responsible Testing Location ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 14 1.3 Test Equipments Utilized ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 14 Change History Version Date Reason for change 1.0 2019-10-15 First edition MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 14 REPORT No.：SZ19080340E01 1. Technical Information Note: Provide by manufacturer. 1.1. Manufacturer and Factory Information Applicant: SHANGHAI MOUNTAIN VIEW SILICON CO,. LTD Applicant Address: Suite 4C, Building 3, 1238 Zhangjiang Road, Pudong New District, Shanghai, China Manufacturer: SHANGHAI MOUNTAIN VIEW SILICON CO,. LTD Manufacturer Address: Suite 4C, Building 3, 1238 Zhangjiang Road, Pudong New District, Shanghai, China 1.2. Equipment Under Test (EUT) Description Wireless Type N/A Frequency N/A MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 14 REPORT No.：SZ19080340E01 2. Test Results 2.1. Applied Reference Documents Leading reference documents for testing: No. Identity Document Title 1 ANSI/IEEE Std 149-2008 IEEE Standard Test Procedures for Antennas 2.2. Test Conditions Test Environment Conditions： Relative Humidity: 25 ... 75 % Temperature: +10 °C to +30 °C 2.3. Test Results lists 2.3.1. Gain Frequency Gain(dBi) 2400MHz 2.81 2410MHz 2.74 2420MHz 3.38 2430MHz 2.73 2440MHz 1.01 2450MHz 1.26 2460MHz 1.50 2470MHz 1.49 2480MHz 1.42 2490MHz 0.36 2500MHz 0.33 MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 5 of 14 REPORT No.：SZ19080340E01 2.3.2. Return Loss/VSWR/Input Impedance Frequency Return Loss (dB) VSWR Input Impedance(Ω) 240…

Text truncated - open the document above for the full version.

TRF No.: 04-E001-0B TRF Originator: GTG TRF Date: 2023-12-13 Web: www.gtggroup.com E-mail: [email protected] Tel.: 86-400 755 8988 CFR 47 FCC PART 15 SUBPART C(DSS) TEST REPORT For Outdoor Soundbar MODEL NUMBER: EPSBAE20, S166, S166A REPORT NUMBER: E04A24060071F00501 ISSUE DATE: July 8, 2024 FCC ID: 2BHQN-EPSBAE20 Prepared for Dongguan LU Hong electroacoustic technology Co., Ltd. No.1, Kailin Road, Shuibei Industrial Zone, Shipai Town, Dongguan City Prepared by Guangdong Global Testing Technology Co., Ltd. Room 101-105, 203-210, Building 1, No.2, Keji 8 Road, Songshan Lake Park, Dongguan city, Guangdong, People’s Republic of China, 523808 This report is based on a single evaluation of the submitted sample(s) of the above mentioned product, it does not imply an assessment of the production of the products. This report shall not be reproduced, except in full, without the written approval of Guangdong Global Testing Technology Co., Ltd. REPORT NO.: E04A24060071F00501 Page 2 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Revision History Rev. Issue Date Revisions Revised By V0 July 8, 2024 Initial Issue REPORT NO.: E04A24060071F00501 Page 3 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Summary of Test Results Test Item Clause Limit/Requirement Result Antenna Requirement N/A FCC Part 15.203/15.247 (c) Pass AC Power Line Conducted Emission ANSI C63.10-2013 Clause 6.2 FCC Part 15.207 Pass Conducted Output Power ANSI C63.10-2013 Clause 7.8.5 FCC Part 15.247 (b)(1) Pass 20 dB Bandwidth and 99% Occupied Bandwidth ANSI C63.10-2013 Clause 6.9.2 FCC Part 15.247 (a)(1) Pass Carrier Hopping Channel Separation ANSI C63.10-2013 Clause 7.8.2 FCC Part 15.247 (a)(1) Pass Number of Hopping Frequency ANSI C63.10-2013 Clause 7.8.3 FCC Part 15.247 (b)(1) Pass Time of Occupancy (Dwell Time) ANSI C63.10-2013 Clause 7.8.4 FCC Part 15.247 (a)(1) Pass Conducted Bandedge and Spurious Emission ANSI C63.10-2013 Clause 6.10.4 & Clause 7.8.8 FCC Part 15.247(d) Pass Radiated Band edge and Spurious Emission ANSI C63.10-2013 Clause 6.3 & 6.5 & 6.6 FCC Part 15.205/15.209 Pass *This test report is only published to and used by the applicant, and it is not for evidence purpose in China. *The measurement result for the sample received is <Pass> according to <CFR 47 FCC PART 15 SUBPART C(DSS)> when <Accuracy Method> decision rule is applied. REPORT NO.: E04A24060071F00501 Page 4 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................... 5 2. TEST METHODOLOGY ......................................................................................................... 6 3. FACILITIES AND ACCREDITATION ..................................................................................... 6 4. CALIBRATION AND UNCERTAINTY ................................................................................... 7 4.1. MEASURING INSTRUMENT CALIBRATION ........................................................... 7 4.2. MEASUREMENT UNCERTAINTY ............................................................................ 7 5. EQUIPMENT UNDER TEST .................................................................................................. 8 5.1. DESCRIPTION OF EUT ........................................................................................... 8 5.2. CHANNEL LIST ........................................................................................................ 8 5.3. MAXIMUM PEAK OUTPUT POWER ........................................................................ 9 5.4. TEST CHANNEL CONFIGURATION ........................................................................ 9 5.5. THE WORSE CASE POWER SETTING PARAMETER ............................................ 9 5.6. DESCRIPTION OF AVAILABLE ANTENNAS ......................................................... 10 5.7. SUPPORT UNITS FOR SYSTEM TEST ................................................................. 10 5.8. SETUP DIAGRAM .................................................................................................. 11 6. MEASURING EQUIPMENT AND SOFTWARE USED......................................................... 12 7. ANTENNA PORT TEST RESULTS ..................................................................................... 14 7.1. Conducted Output Power ........................................................................................ 14 7.2. 20 dB Bandwidth and 99% Occupied Bandwidth..................................................... 15 7.3. Carrier Hopping Channel Separation ...................................................................... 16 7.4. Number of Hopping Frequency ............................................................................... 18 7.5. Time of Occupancy (Dwell Time) ............................................................................ 19 7.6. Conducted Bandedge and Spurious Emission ........................................................ 21 8. RADIATED TEST RESULTS ............................................................................................... 23 8.1. Radiated Band edge and Spurious Emission .......................................................... 29 9. ANTENNA REQUIREMENT ................................................................................................ 41 10. AC POWER LINE CONDUCTED EMISSION ......................................................... 42 11. TEST DATA - Appendix A ..................................................................................... 45 APPENDIX: PHOTOGRAPHS OF TEST CONFIGURATION ................................................... 106 REPORT NO.: E04A24060071F00501 Page 5 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Dongguan LU Hong electroacoustic technology Co., Ltd. Address: No.1, Kailin Road, Shuibei Industrial Zone, Shi…

Text truncated - open the document above for the full version.

REPORT NO.: E04A24060071F00501 Page 76 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Dwell NVNT 2-DH5 2402MHz Ant1 One Burst Dwell NVNT 2-DH5 2402MHz Ant1 Accumulated REPORT NO.: E04A24060071F00501 Page 77 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Dwell NVNT 2-DH5 2441MHz Ant1 One Burst Dwell NVNT 2-DH5 2441MHz Ant1 Accumulated REPORT NO.: E04A24060071F00501 Page 78 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Dwell NVNT 2-DH5 2480MHz Ant1 One Burst Dwell NVNT 2-DH5 2480MHz Ant1 Accumulated REPORT NO.: E04A24060071F00501 Page 79 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Dwell NVNT 3-DH5 2402MHz Ant1 One Burst Dwell NVNT 3-DH5 2402MHz Ant1 Accumulated REPORT NO.: E04A24060071F00501 Page 80 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Dwell NVNT 3-DH5 2441MHz Ant1 One Burst Dwell NVNT 3-DH5 2441MHz Ant1 Accumulated REPORT NO.: E04A24060071F00501 Page 81 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Dwell NVNT 3-DH5 2480MHz Ant1 One Burst Dwell NVNT 3-DH5 2480MHz Ant1 Accumulated REPORT NO.: E04A24060071F00501 Page 82 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Band Edge Condition Mode Frequency (MHz) Antenna Hopping Mode Max Value (dBc) Limit (dBc) Verdict NVNT 1-DH5 2402 Ant1 No-Hopping -51.14 -20 Pass NVNT 1-DH5 2480 Ant1 No-Hopping -53.27 -20 Pass NVNT 2-DH5 2402 Ant1 No-Hopping -39.05 -20 Pass NVNT 2-DH5 2480 Ant1 No-Hopping -52.01 -20 Pass NVNT 3-DH5 2402 Ant1 No-Hopping -40.49 -20 Pass NVNT 3-DH5 2480 Ant1 No-Hopping -52.19 -20 Pass REPORT NO.: E04A24060071F00501 Page 83 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Test Graphs Band Edge NVNT 1-DH5 2402MHz Ant1 No-Hopping Ref Band Edge NVNT 1-DH5 2402MHz Ant1 No-Hopping Emission REPORT NO.: E04A24060071F00501 Page 84 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Band Edge NVNT 1-DH5 2480MHz Ant1 No-Hopping Ref Band Edge NVNT 1-DH5 2480MHz Ant1 No-Hopping Emission REPORT NO.: E04A24060071F00501 Page 85 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Band Edge NVNT 2-DH5 2402MHz Ant1 No-Hopping Ref Band Edge NVNT 2-DH5 2402MHz Ant1 No-Hopping Emission REPORT NO.: E04A24060071F00501 Page 86 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Band Edge NVNT 2-DH5 2480MHz Ant1 No-Hopping Ref Band Edge NVNT 2-DH5 2480MHz Ant1 No-Hopping Emission REPORT NO.: E04A24060071F00501 Page 87 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Band Edge NVNT 3-DH5 2402MHz Ant1 No-Hopping Ref Band Edge NVNT 3-DH5 2402MHz Ant1 No-Hopping Emission REPORT NO.: E04A24060071F00501 Page 88 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Band Edge NVNT 3-DH5 2480MHz Ant1 No-Hopping Ref Band Edge NVNT 3-DH5 2480MHz Ant1 No-Hopping Emission REPORT NO.: E04A24060071F00501 Page 89 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Band Edge(Hopping) Condition Mode Frequency (MHz) Antenna Hopping Mode Max Value (dBc) Limit (dBc) Verdict NVNT 1-DH5 2402 Ant1 Hopping -49.1 -20 Pass NVNT 1-DH5 2480 Ant1 Hopping -52.09 -20 Pass NVNT 2-DH5 2402 Ant1 Hopping -40.37 -20 Pass NVNT 2-DH5 2480 Ant1 Hopping -51.17 -20 Pass NVNT 3-DH5 2402 Ant1 Hopping -40.26 -20 Pass NVNT 3-DH5 2480 Ant1 Hopping -53.3 -20 Pass REPORT NO.: E04A24060071F00501 Page 90 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Test Graphs Band Edge(Hopping) NVNT 1-DH5 2402MHz Ant1 Hopping Ref Band Edge(Hopping) NVNT 1-DH5 2402MHz Ant1 Hopping Emission REPORT NO.: E04A24060071F00501 Page 91 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Band Edge(Hopping) NVNT 1-DH5 2480MHz Ant1 Hopping Ref Band Edge(Hopping) NVNT 1-DH5 2480MHz Ant1 Hopping Emission REPORT NO.: E04A24060071F00501 Page 92 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Band Edge(Hopping) NVNT 2-DH5 2402MHz Ant1 Hopping Ref Band Edge(Hopping) NVNT 2-DH5 2402MHz Ant1 Hopping Emission REPORT NO.: E04A24060071F00501 Page 93 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Band Edge(Hopping) NVNT 2-DH5 2480MHz Ant1 Hopping Ref Band Edge(Hopping) NVNT 2-DH5 2480MHz Ant1 Hopping Emission REPORT NO.: E04A24060071F00501 Page 94 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Band Edge(Hopping) NVNT 3-DH5 2402MHz Ant1 Hopping Ref Band Edge(Hopping) NVNT 3-DH5 2402MHz Ant1 Hopping Emission REPORT NO.: E04A24060071F00501 Page 95 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Band Edge(Hopping) NVNT 3-DH5 2480MHz Ant1 Hopping Ref Band Edge(Hopping) NVNT 3-DH5 2480MHz Ant1 Hopping Emission REPORT NO.: E04A24060071F00501 Page 96 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Conducted RF Spurious Emission Condition Mode Frequency (MHz) Antenna Max Value (dBc) Limit (dBc) Verdict NVNT 1-DH5 2402 Ant1 -28.42 -20 Pass NVNT 1-DH5 2441 Ant1 -33.06 -20 Pass NVNT 1-DH5 2480 Ant1 -35.71 -20 Pass NVNT 2-DH5 2402 Ant1 -30.46 -20 Pass NVNT 2-DH5 2441 Ant1 -36.66 -20 Pass NVNT 2-DH5 2480 Ant1 -37.89 -20 Pass NVNT 3-DH5 2402 Ant1 -26.6 -20 Pass NVNT 3-DH5 2441 Ant1 -37.18 -20 Pass NVNT 3-DH5 2480 Ant1 -35.33 -20 Pass REPORT NO.: E04A24060071F00501 Page 97 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Test Graphs Tx. Spurious NVNT 1-DH5 2402MHz Ant1 Ref Tx. Spurious NVNT 1-DH5 2402MHz Ant1 Emission REPORT NO.: E04A24060071F00501 Page 98 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Tx. Spurious NVNT 1-DH5 2441MHz Ant1 Ref Tx. Spurious NVNT 1-DH5 2441MHz Ant1 Emission REPORT NO.: E04A24060071F00501 Page 99 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Tx. Spurious NVNT 1-DH5 2480MHz Ant1 Ref Tx. Spurious NVNT 1-DH5 2480MHz Ant1 Emission REPORT NO.: E04A24060071F00501 Page 100 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Tx. Spurious NVNT 2-DH5 2402MHz Ant1 Ref Tx. Spurious NVNT 2-DH5 2402MHz Ant1 Emission REPORT NO.: E04A24060071F00501 Page 101 of 108 TRF No.: 04-E001-0B Global Testing , Great Quality. Tx. Spurious NVNT 2-DH5 2441MHz Ant1 Ref Tx. Spurious NVNT 2-DH5 24…

Text truncated - open the document above for the full version.

AC Power Line Conducted Emission Radiated Band edge and Spurious Emission